What is a thermopot? This is a convenient household appliance, a unique combination of an electric kettle and a thermos. The device can boil water and maintain its high temperature. The device is convenient for home, office and garden. How to choose a thermopot and what should you consider when purchasing it?

The thermopot is a steel flask covered with a plastic or metal body. The temperature of the water in the flask after boiling remains hot (90-95 degrees) for 90 minutes after boiling, and then, for another day, the thermopot will maintain the water temperature at 80 degrees. At the same time, the body of the device remains cold.

What is the difference between a thermopot and a kettle with temperature control?

Thermopot combines the functions of a kettle and thermos

Firstly, volume. A regular kettle can fill no more than two liters of water, but thermal pots boil from 3 to 3.5 liters of water. There are also thermopots for 5 liters. Even the smallest thermopots (volume 2.2 liters) are larger than the largest kettles (2 liters).

Secondly, power. The power of the thermopot does not exceed 1 kW; kettles have higher ratings. Consequently, the kettle boils water quickly, but the thermopot boils slowly. It takes about 15 minutes for water to boil in a thermopot (about 5 minutes per liter), but a kettle boils a liter of water in 2-3 minutes.

Thirdly, the method of pouring water. The kettle needs to be picked up and tilted over the cup, and the thermopot stands motionless. Water is poured from a thermopot into a cup in one of three ways: by pressing a button (electric pump), by pressing the cup on a special protrusion, by pressing a key that turns on the pump (manual pump, this method of pouring water is not associated with electricity, it can be used even if the device disconnected from the network).

It was in thermopots that manufacturers first realized the ability to maintain a given temperature. The device keeps the water hot as long as it is plugged in and for several hours after disconnecting from the network. This consumes a minimal amount of electricity. If you boil water in a thermopot in the morning, you will have boiling water at hand throughout the day. Agree, an excellent solution for home or office.

How to choose a thermopot: basic criteria

A thermopot with a metal body is suitable for lovers of modern design and high quality

If you decide to purchase this household appliance, then its cost ranges from 3 to 12 thousand rubles (depending on functionality and brand). When choosing a thermopot, pay attention to the following points:

• Volume

If you have a small family (2-3 people), a thermopot with a capacity of 2.6 liters is quite suitable for you. If you like to receive guests and you always need hot water for tea, choose a thermopot with a large volume.

• Temperature

Before buying a device, decide what temperature water you need and for how long. There are devices that can keep water hot for a very long time. But they turn on periodically to heat the cooled water, and this costs electricity. Other devices maintain the water temperature at 80 degrees for six hours, and then gradually begin to cool.

• Water supply method

A thermopot with a simple design on the plastic body will help overcome nostalgia for Chinese thermoses.

There is no need to tilt or lift the thermopot to pour water. Most models have a button; after pressing it, water is poured into the cup in a thin stream. There are thermopots that work on the cooler principle (you need to press a lever with the cup), and devices that pour water into the cup using the pump principle (they work without electricity).

• Design and additional features

Thermopots are varied in their design. There are devices with metal and plastic bodies, with or without patterns. Metal thermopots are considered to be of the highest quality, which is why they cost more. It is convenient if the device is equipped with a display on which you can see the water temperature at a given time. There are models with a function to reduce steam formation, and there are thermopots with built-in filters. The more functions this device has, the higher its cost.

When choosing a thermos kettle, do not forget about its disadvantages

Firstly, in terms of dimensions, this device is much larger than any kettle. Therefore, if you decide that you need a thermopot, think about where you will put it. Perhaps there is no place for this device in a small kitchen. Secondly, the thermopot is designed for large volumes of water. You can't quickly boil a cup of water to make tea. Thirdly, thermal pots are much more expensive than electric kettles.

But if you constantly need to have some supply of hot water, a thermopot is what you need. Good luck with your choice!

A thermopot is a modern samovar that is capable of both boiling water and keeping it hot. This is a convenient device that combines the functions of two devices: an electric kettle and a thermos, as well as other functions. Thermopot is still little known to the domestic buyer, so many people have different questions when getting to know it.

Every day a person needs hot water for washing dishes, cooking, etc. To quickly heat the water, many people use electric kettles. Their main disadvantage is the rapid cooling of the water. If you constantly boil it to keep it hot, it will consume a lot of electricity.

A kettle with a thermos function (thermos kettle) is a new device for storing and heating water to a certain temperature. This device is used to save energy consumption when boiling water and keeping it hot.

Design and principle of operation

The body of the thermopot is made of various materials: glass, plastic, metal or ceramics. A combination of these materials is also possible. To better retain heat, the walls are double. The thermopot has a removable flask, similar to the flask of a thermos. This makes caring for such a thermal kettle much more convenient.

At the bottom of the device is located, which can be disk or spiral, just like an electric kettle.

The body of the thermopot is most often made in the shape of a rectangle or half-cylinder. There is a convenient handle, a device for pouring water, buttons and indicators. Some models may be equipped with an additional filter and backlight, as well as a function for brewing coffee or tea.

To start heating the water, you need to pour water into the flask and press the power button. When the water boils, the device will turn off on its own. Boiled water can be poured into cups using a special hand pump, or by pressing the cup on the valve. The thermos kettle does not need to be tilted or lifted to pour water. This is convenient for children and sick people. This function also affects the safety of using the thermopot, since you will no longer be able to accidentally tip the kettle over on yourself and get burned.

The difference between a kettle and a thermopot is the longer heating of the water, since the volume of the thermopot flask is much larger than the capacity of the kettle. It is better to boil water in advance. After this, you can set the temperature to be maintained at a certain level. The thermopot has several water heating modes, as well as a delayed start mode. Using this mode, you can set up water heating with an hour break during the day.

Varieties

There are many different types of thermopots with different characteristics and parameters. They are divided by analogy with electric kettles. The main division of thermopots is as follows.

By body type:

• Metal.
• Plastic.
• Ceramic.
• Glass.
• Combined.

By volume Thermal pots are most often produced from 2.5 to 8 liters.

By power– from 0.6 to 1 kW.

Heating element type:

• With open heating element.
• With disk heater.

Among the additional functions, the thermopot can be equipped with:

• Timer.
• Display showing operating modes.
• Sound signal.
• Screen backlight.
• Removable strainer.
• Self-cleaning function.
• Rotating the thermos kettle on the stand.
• Several water filling options.
• Delayed start.
• Several heating modes.
• Disabling automatic boiling.
• Blocking water filling when heating.
• Protection against accidental pressing.
• Blocking the dry kettle from turning on.

Bulb material

Many thermos kettles have a metal flask for water. Stainless steel flasks are durable and reliable. However, they quickly develop scratches. If the flask is glass, it is easier to break. But it is more scratch resistant. From a safety point of view, glass and steel do not emit harmful substances.

Some Japanese thermal kettles have a ceramic-coated flask. Therefore, after boiling, the taste of water does not change.

A heating element

The thermopot can be equipped with two heating elements. One heats the water and the other maintains the water temperature. There are also models with a combined heater that performs both functions. Heaters can have a coating that protects them from corrosion: silver, nickel-plated, chrome-plated and even gold-plated.

Heaters in thermopots usually come in the form of an internal and external spiral, as well as in the form of a closed disk. When choosing a thermal kettle, you need to know that models with an open spiral have a low cost, but they will also have to be cleaned frequently, since the spiral is in contact with water. Also, such a spiral must be completely filled with water, otherwise it will overheat and fail.

A thermopot with a closed spiral is easy to clean, but consumes more energy and creates noise. If the device is equipped with a disk heater, then there will be virtually no noise when heating water, and they work more efficiently and quickly. This is the most optimal choice.

Thermopot and its power

The main parameter of a thermos kettle is its power. The performance of the kettle and electricity consumption depend on this parameter. Most thermal kettles for heating mode have a power of 600 to 900 watts. For water heating mode, the power of the second heater is 30-40 watts.

To select the required power of the device, we must not forget that the greater the capacity, the greater the power and electricity consumption. This option is not suitable if there are problems with the old electrical wiring.

Water heating function

All thermopots are equipped with this useful function. It makes it possible to select the optimal temperature for heating water, as well as to carry out high-quality tea brewing. There is a separate mode for heating baby food.

The majority of thermal kettles have three temperature settings: 60, 80, 95 degrees. If you need to have other intermediate temperature values, you will have to buy another model, with a stepless thermostat. They can set any temperature value in the range of 60-100 degrees.

Water pump

The thermopot has a large mass, unlike a regular electric kettle. Therefore, in order to avoid lifting the thermal kettle to pour boiling water into a cup, it has a special device for pouring water - a pump. It can be either mechanical or electrical. This creates great convenience: to pour boiling water, just place the cup to the neck of the kettle and press the lever or button.

A mechanical pump is good when there is no power, but an electric air pump starts working if you press the “water supply” button.

Criterias of choice

• Temperature accuracy . If this criterion is very important to you, then it is defined like this. Boil water, then pour water from a thermal kettle into a container and close the lid, after placing a thermometer in the water to determine the temperature reading. This will make it clear how accurately the temperature is maintained in a certain mode.
• The period of time required for the boiling point to occur to maintain the temperature of water at a given temperature . This parameter differs significantly for different models. But the return transition time is practically the same. For the majority of consumers, this choice parameter is insignificant.
• Keeping warm . For this function, people most often buy a thermos kettle. This function is included in its name. Its essence is to maintain the specified temperature of boiled water. Thermal kettles can be equipped with several temperature maintenance modes. Budget models have only one mode. After boiling, the thermal kettle automatically switches to keeping warm.
• Time to pour water . This parameter is also not of particular importance for most consumers, since the time for filling water is almost the same for different models. However, there are consumers for whom this is an important criterion.
• Boiling time . This is the most important parameter when choosing a thermos kettle. Here you need to know that almost any model of thermopots with the same capacity boils water in one time.

Typically, thermal kettles offered in retail chains have virtually no defects or malfunctions, and perform their tasks: boiling water and heating it at the required temperature. The most economical are those thermos kettles that have high power in the boiling mode, but have little power in the heating mode.

When purchasing a thermos kettle in a store, you should pay attention to the following points:

• Turning the device on and off should be convenient and clear. The menu on the display should be in Russian, in large font, with clear contrasting symbols. The same requirements must be applied to the scale. It must contain numbers and clear divisions.
• The thermopot must be stable. A faulty device that is broken may be unstable even on a level table. It is better to refuse such a thermal kettle and choose another model.
• The quality of the connection between the body and the cover is subject to special requirements, as this affects ease of use, safety and heat retention. The lid should be easy to close with a latch that should not stick. Most often, cheap Chinese models can have this drawback.

Recently, many new products have appeared that make our life much easier. But not all of them become immediately clear – what they are intended for and how to use them. One of these new inventions was a device called a thermopot - a unit that miraculously combines the functionality of a regular electric kettle and thermos. Thanks to these features, it has gained popularity among consumers and is firmly entrenched in everyday life.

A thermopot is a household electrical device that “can” boil water and maintain its temperature for a long time.

In appearance, the thermopot is a container with a volume of up to 5 liters in a metal or plastic case. On top of the device there is a cover, on which, as a rule, the control panel of the device is located.

To supply water, the device has a pump, which can be manual or electric.

All devices of this kind have several temperature modes. The more there are, the better, of course, but as practice has already shown, three or four modes are more than enough to operate the device.

There are different models of thermopots. Some simply bring the water to a boil, and then it slowly cools. And others maintain the temperature of the liquid with periodic short starts. True, for this to happen, the device must be constantly connected to the network.

Expensive models of these units may have additional functions, for example:

• You can boil water at a certain time;
• You can select the temperature to be maintained (50-90 degrees);
• The display shows the current temperature;
• There is a self-cleaning function.

How to use a thermopot:

• Water is poured into the tank so that its volume does not exceed the maximum mark;
• Then the device is connected to the network;
• After the water boils, it can be used;
• To pour liquid into a cup, you need to bring the mug and press a button or a special water supply valve.

It is better to use purified and filtered water for the thermopot, and it is advisable to pour it into the reservoir from a jug or other container, because it will not be possible to place the device directly under the tap.

Explanation: what is a thermopot for and how to choose it

It became clear that the thermopot heats the water and keeps it warm. In what cases is its use relevant?

So, a thermopot is needed in the following situations:

• In a crowded family there are lovers of hot drinks;
• There are small children;
• If you're going out into nature, you definitely won't be left without hot water;
• Large groups of relatives or friends often gather in the house;
• In a small cafe there is a constant need for boiling water;
• Office employees will be happy to treat themselves to drinks at any time.

Thus, if you have a thermopot, you will always have hot water at hand for all your necessary needs. But in order for the device to work properly and efficiently, it is necessary to choose it correctly.

What should you pay attention to when purchasing a unit:

• On its capacity - here you should clearly understand for what purpose it is being purchased and count the number of people in the family;
• The presence of two types of pumps will allow you to use the device in a way that is convenient for you;
• If the current temperature of the liquid is displayed on the display, it will be easier for you to decide whether to use this water or heat it up;
• Thermopots with a heating element in the form of a spiral are cheaper, and with a disk they are most convenient to use.

The more additional functions a device has, the more expensive it is.

The German company Bosch is considered the leader among thermopot manufacturers. We can recommend the Bosch THD 2021/2023 model, which has already received many positive responses from buyers of this product.

The Japanese company Supra does not lag behind its German colleagues. The devices produced by this company are famous for their quality, efficiency, and interesting design.

Is thermopot harmful or not: how safe is it?

There is an opinion that boiled water many times is dangerous for consumption. True, expert opinions on this issue often differ.

• Each time it contains more and more harmful compounds;
• The taste of the liquid changes;
• A lot of scale appears on the container.

But at the same time, everything is not as scary as it seems. Yes, with each boiling the content of hazardous substances in the liquid increases, but still it will not reach such an amount as to cause serious harm to human health.

But the taste of prepared dishes or drinks from such water can really change, so you shouldn’t get too carried away with boiling.

However, if we look closely at the principle of operation of a thermopot, we will see that it essentially boils water once, and then simply maintains it at the required temperature, not allowing the liquid to cool completely. And if we ourselves do not turn it on to the “boiling” mode, then it will not do this on its own.

So is thermopot harmful? Most likely no. After all, the same ordinary electric kettle, which we turn on many times a day, boils water many more times than this device.

Which is better, a thermopot or a kettle: a comparative analysis

Analyzing all the information, some will say that a thermopot is more profitable than an electric kettle, while others will remain faithful to an already proven device.

To figure out what is better and more profitable to buy, you need to consider the advantages and disadvantages of a thermopot in comparison with a kettle.

Pros of a thermopot:

• You can set the required temperature while the kettle simply boils water;
• The heated liquid remains hot for several hours, and cools quickly in the kettle;
• The capacity of the device allows you to heat water in larger quantities than can be done in a conventional device;
• To draw water into a cup, the thermopot does not need to be lifted or tilted - in many models, you just need to press a button or press a special valve with the cup;
• You can't get burned with a thermopot - its surface doesn't heat up, and if it suddenly falls, the system against liquid spillage is activated.

In addition to all this, the unit is also economical, since its use results in significant savings in electricity.

It may, of course, seem that this is not the case due to the fact that the device is constantly connected to the network. But an ordinary electric kettle that has cooled down and is turned on many times will “wind up” much more energy than just boiling water and maintaining it at the appropriate level.

How much energy does a thermopot consume? Its power ranges from less than 1 to 3 kW. When boiling water for the first time, it will spend more time and, accordingly, more energy than a kettle does. But the second time it will boil water very quickly (less than a minute) and the costs will be minimal.

Thus, the thermopot is more economical in terms of both time and energy costs.

But with all the advantages of this device, there are also some disadvantages:

• The thermopot is quite heavy and takes up more space compared to a kettle;
• A large volume of water will take longer to boil for the first time than in a conventional device;
• High price.

Thermal pots are ideal for large families where there is a constant need for hot water or people who often have large and noisy groups. If you need boiling water about a couple of times a day, an ordinary kettle will be enough.

Expert answer: what is a thermopot (video)

Analyzing all the information, it becomes clear that a thermopot is a very convenient and economical device, but it is worth buying for those people who often need hot water during the day. If there is no such need, you can easily get by with an electric kettle. But for office workers or staff in a small cafe, such a device can be a real godsend.

Thermopots are a good alternative to an electric kettle. They are attractive due to their large volume, ability to heat water and maintain its temperature for a long time.

What is a thermopot?

Thermopot combines the functions of an electric kettle and a thermos, that is, it heats water and is able to maintain its temperature.

Thermopots are especially convenient for families with small children. To pour water, the device does not need to be lifted or moved - just press the button. Thanks to the flask design and periodic heating, the water will always be hot.

The thermopot is also intended for a large number of people living in one area. Everyone may need boiling water at different times, but with this device the water will always be hot.

Thermal pots are also used in catering establishments. The device will be appreciated when there are a large number of guests when you need to have a tea party.

The device can have several temperature settings - usually no more than 5-6. This allows you to adjust the heating so that water at the optimal temperature is always available.

Basic thermopot functions– heating and heating of water. Additionally, the following options may be provided:

• Automatic shutdown. The device will turn off if there is little or no water in the tank. This feature is important for security purposes.
• Key lock. This option is also necessary for safety reasons, especially if there are small children in the house. Usually only the filling button is blocked. This function is present in most thermopot models.
• Delayed start. This option allows you to set the device's turn-on time. This option is convenient when no one is at home all day or you don’t want to leave the device at night.
• Blocking water filling during heating. This function ensures safe operation, since opening the lid during heating can cause severe burns.
• Sound signal. It notifies you when the work is completed, that is, when the water has boiled.

Before purchasing a thermopot, you need to carefully consider what features you need. The more features a device has, the higher its price. Possible changes in the future should be taken into account - a small child may appear in the family, with whom the ability to set different temperature conditions and lock buttons is important.

Device structure

The design of a thermopot is quite simple: a water tank, a heating element and a control element. The body of the device can be made of metal, plastic or glass, but the filling is always the same.

The water reservoir in a thermopot is a sealed flask - similar designs are used for thermoses. There is air between the walls of the device and the water tank. The lid of the thermopot is sealed. This is necessary to maintain the temperature of the water in the tank.

At the bottom of this flask there is a heating element. It provides water heating. To maintain the set temperature, this element is periodically turned on for heating. Most thermopots have a disk heating element; a spiral design is less common.

Some models provide for the use of two heating elements. One performs the function of boiling water, and the other is necessary to heat it.

A mechanical pump or pump is built into the lid of the thermopot. When you press a button on the control panel, water begins to flow from the spout of the device. This principle of pouring water is convenient, since the device is heavier than standard electric kettles.

Principle of operation

The thermopot works on the principle of an electric kettle. Water is poured into the device and then turned on. After the water boils, the thermal switch is activated.

The water in the thermopot cools much more slowly than in the kettle, but this process still occurs. When the water cools down to the user-set level, the temperature sensor is activated.

Water must be poured into the device from some container, but not placed under the tap. It is more convenient to purchase a jug for these purposes.

General rules for choosing a thermopot

The modern market offers a fairly wide range of thermal sweaters, so the consumer may have difficulty choosing. When purchasing such a device, you should focus on the following criteria:

• Volume. This indicator must be calculated based on the number of people in the family and the frequency of use of the device. For a family of 2-3 people, a small thermopot with a capacity of 2.5 liters is enough. If the family is larger or hot water is used frequently, then it is worth purchasing a device with a volume of 3-4 liters.
• Frame. It is important to decide on the material from which the external part of the device is made. It can be metal, plastic, ceramic or glass. Often a combination of two materials is used, for example metal and plastic. Plastic is attractive due to its low cost and rich color range. The disadvantages of this material are fragility and tarnishing over time. If there are small children in the family, then a plastic case is preferable - you can get burned much more seriously on metal. The metal body attracts with its strength and durability, although such material can be scratched.
• Flask material. Usually metal or glass is used. Glass flasks are more fragile, but do not emit harmful substances, as is possible when using metal. Stainless steel is also safe in this regard. Another disadvantage of metal flasks is the possibility of foreign taste in the water.
• A heating element. It is better to choose models with a disk element, since if there is an open spiral, you will have to frequently clean the thermopot from scale. Another advantage of the disk is lower noise level. It is important to pay attention to the coating of the heater - it can be silver, nickel-plated, chrome-plated, or gold-plated. This addition is necessary to protect the heating element from corrosion.
• Water supply. A mechanical pump is attractive because it will supply water even when there is a power outage. The operation of the electric pump is directly connected to the network.
• Power. Manufacturers often indicate two parameters. The higher the first indicator, the faster the device will heat the water. The efficiency of the thermopot depends on the value of the second parameter, so it should be minimal. Usually, if there are two power indicators, the device has two heating elements - separately for boiling and heating water.
• Availability of a filter. This function is necessary if ordinary tap water is poured into the device.
• Number of temperature modes. In simpler models, water heating is performed in only one mode; in others, this parameter can be set independently. Most models with selectable temperature settings allow you to set it in three positions: 60, 80 and 95°C.
• Control Panel. Sometimes you come across models with menus in English, so it’s worth paying attention to this detail.
• Control panel backlight.
• Possibility of detaching the device cover. At first glance, this is an insignificant factor, but if you need to drain the remaining water or rinse the device from the inside, this feature is very useful.
• Rotation on a stand. This feature is important if the device will be placed in the middle of the table. Then it will be convenient for each person to turn the thermopot towards themselves.
• Measuring scale. For user convenience, it should be transparent and have digital symbols.
• Cleaning function.

Watch the video with tips on choosing a thermopot and an overview of the capabilities of three popular models of this device:

It is important to consider additional technology options. For safety, the functions of locking buttons and pouring water during heating are necessary. It is also important to have a comfortable and strong handle on the device so that it can be carried if necessary.

When choosing a thermopot, you should take into account every little detail. This device is used several times daily, so its convenience, safety and the availability of the necessary options are important.

Which thermostat should you choose? Best models

Today, in any home appliance store you can find a decent assortment of thermopots. When choosing, you should pay attention to the TOP best devices.

This model is designed for a volume of 3 liters. The power of the device is 910 W, the second parameter when maintaining the temperature is 13 W.

The body of the thermopot is a combination of metal and plastic. The heating element is a closed spiral.

This model has the ability to adjust the temperature in steps – 80, 90 and 98°C. Water is filled by an automatic pump.

One of the important advantages of this model is the presence of a built-in battery. This allows the consumer not to be left without hot water during a power outage.

Another advantage of a thermopot is the ability to adjust the filling speed. The consumer can choose one of 4 proposed modes.

The device has an internal carbon coating that improves the drinking properties of water, and a self-cleaning function. If there is no water, the thermopot is blocked.

The cost of such a thermopot is on average 6000-7000 rubles.

This model is designed for 5 liters. The power of the device is 1200 W.

The unit body is made of stainless steel. A hidden element is installed for heating, and there is a cooling fan.

Temperature conditions are regulated in stages. You can set the parameter to 60, 90 or 98°C. Separately, there is a boiling mode and an economy mode. The second option is energy saving - the device will be in a standby state if the lights in the room are turned off.

The device has a backlit liquid crystal display. Control type – electronic. For safety reasons, you can block the water supply.

The thermopot has an attractive electromechanical pump, so you can pour water even if there is a power outage. Among the advantages is a temperature regime of 60°C - this parameter is important for families with small children.

This thermopot model is distinguished by the presence of a rapid cooling system. This mode allows you to quickly cool water to 62°C.

The average cost of the device is 8,000 rubles.

This thermopot is designed for a small family and has a volume of 2 liters. The power of the device is 1600 W.

The body of the unit is made of plastic. The heating element is a closed spiral. For safety reasons, if you have small children, you can lock the control buttons.

The thermopot has 5 temperature settings. Switching is carried out in steps. You can set the temperature from 70°C. A sound signal notifies you when the water is heating.

This model is attractive because it has an automatic descaling program. The device has a filter, the need to replace which will be notified by a special indicator.

A distinctive feature of the unit is that it heats the amount of water required for one cup. In this case, you can adjust the serving volume from 120 to 300 ml. This opportunity is attractive because you can get a mug of hot water in less than a minute.

An important advantage of the device is the stand for mugs, which can be installed at any height. This is not only convenient, but also eliminates the risk of boiling water splashing.

The average cost of the device is 6,000 rubles.

This model is designed for 4 liters. The power of the device is 750 W.

The body of the thermopot is made of stainless steel. There is a convenient measuring scale with digital marks of 1, 2 and 3 l.

Water supply can be done in different ways - using an automatic pump or by pressing the cup on the valve.

An important advantage of this unit is the ability to select temperature conditions. The parameters are adjusted in steps. The minimum temperature is only 45°C, which is rare for such equipment.

One of the advantages of this model is delayed start. There is also an energy-saving mode - the device turns off in the dark. If necessary, this option can be disabled.

The average cost of this model is 7,000 rubles.

The body of the thermopot of this model is made of metal combined with plastic (lid, lower part). The device is designed for a volume of 4 liters. Its power is 750 W.

The thermopot has a convenient measuring scale with digital markings. The thermopot has simple controls. There are two temperature modes – boiling (100°C) and 90°C.

The water supply in the thermopot is combined. There is an electric pump, but during a power outage the mechanical pump operates.

Despite the simplest control of the device, safety requirements are taken into account. If there is insufficient water, the unit is blocked. There is also a pump lock button.

One of the advantages of this model is its attractive design. The body of the device is made in purple with a floral pattern.

This model is designed for a volume of 4 liters. The power of the thermopot is 750 W. The heating element is a hidden spiral.

The body of the device is made of steel in a classic combination with black plastic. The flask of the unit is made of metal. A measuring scale without numbers; marks indicate every half liter of water poured.

The thermopot has 3 temperature settings – 70, 85 and 98°C. The parameters are switched in steps.

Combined water supply - electric pump and mechanical pump. For safety reasons, the water supply is blocked.

One of the advantages of a thermopot is its rotating base. The device can be rotated 360°.

An important point is the presence of a power off button on the device body. Many models lack this advantage and therefore turn off only when the plug is removed from the socket.

A pleasant advantage of a thermopot is the combination of quality, necessary functionality and a reasonable price. The average cost of the device is about 3,000 rubles.

Thermopots are much more attractive than electric kettles due to their larger volume and expanded functionality. When choosing a device, it is important to take into account individual needs in order to select a model that combines good quality, affordable price and the necessary set of capabilities.

In contact with

“Teapot” is often called a person who is poorly able to do something, inexperienced. For example, on the roads, alas, there are countless dummies of drivers driving according to their own rules, known to them alone. However, those electric kettles that will be discussed in this material - thermopots - on the contrary, are distinguished by a wide range of skills (compared to conventional ones). Our story is about what thermopots can be purchased today in domestic stores. The price ceiling is 3 thousand rubles.

Thermopot is an “advanced” electric kettle. Its main feature (and difference from a regular kettle) is the ability to maintain a high temperature of water after it boils. And not for 30-60 minutes (some ordinary kettles can do this), but for several hours. Nowadays there are many models in which you can select the desired maintained temperature (usually from 60°C). Water in a thermopot boils more slowly (sometimes in 20-30 minutes) than in a simple kettle, due to the latter’s greater power. The power of a modern electric kettle (the boiling time of water depends on it) can reach up to 2.5 kW, while the power of a thermopot does not exceed 1 kW (usually 600-800 W). The convenience lies in the fact that after boiling water in a thermopot once, the user can get it hot at any time (until the water runs out) - without wasting time (even if a little) waiting for it to boil in the kettle. The capacity of a thermopot is usually larger than the capacity of a kettle - from 2.5 liters. Add here the energy savings of the thermopot. It is obvious if the user does not use all the boiled water from the kettle at once, but always boils it again (to drink a cup of tea) - this is what happens most often. The power of a thermopot in temperature maintenance mode usually does not exceed 70 W.

Very inexpensive

Let's start our review with the most affordable thermopots, costing up to 1.5 thousand rubles. After all, many of us always want to save money. Therefore, find the most budget options.

The Polaris brand cannot be classified as a “first echelon” brand. This brand produces fairly cheap household appliances. It is produced mainly in China. However, this country is now the birthplace of the vast majority of small household (including kitchen) appliances. Models of more famous, “promoted” brands are also produced there.

Thermopot appeared on sale relatively recently. Despite the very low cost (1.2 thousand rubles*), in general, it fully meets all modern requirements. It has a metal body with double walls (additional strength, thermal insulation). The water flask is also metal, with a capacity of 3 liters, with a float water level indicator. The power of the device is 700 W. There are two types of pump for supplying water to the cup: electric and mechanical pump (in case of lack of electricity). There is a timer - you can set the time by which the thermopot will heat the water and maintain its temperature. True, this model has only 1 temperature setting - 95°C (this is a “minus” of many inexpensive thermopots). There is a “Re-boil” function (the process takes much less time than the first boil). There is provision for blocking operation without water, as well as blocking spills (“Child Protection”). The electrical contact is central (the thermopot can be rotated 360°), the heating element is closed (all thermopots have it like this).

Thermal heat can be purchased for about the same amount (1-1.2 thousand rubles). Do not be deceived by the domestic name of the device. Indeed, “Fairy” is one of the few well-known (since 1982) Soviet brands of household appliances. But now the components are Chinese. But assembly, according to some sources, actually takes place in Russia, in Udmurtia, in the city of Votkinsk (“side” production of a defense enterprise). True, according to other information that Culinary Eden managed to obtain, the Fairy equipment is now being assembled in China. We did not receive an official comment - the question of “Culinary Eden” was left unanswered at the Moscow representative office of the manufacturer... However, judging by user reviews, the Chinese origin of the “Fairy” technique is confirmed.

From the “production vicissitudes” we will return directly to the thermopot “Fairy TP-401”. Thermopot is like a thermopot. Power - 750 W. In the mode of maintaining water temperature, this thermopot consumes up to 35 W. Temperature mode - one. Capacity - 4 liters of water (the flask is made of stainless steel, there is an indication of fullness). The case is metal. The design provides for a central electrical contact. There is an electric pump for supplying water and a manual pump. When using an electric pump, water supply begins after pressing the lever with the cup (no need to press a special button). There is a blocking of work without water. The cost of the thermopot “Fairy TP-401”, we remind you, is 1-1.2 thousand rubles.

Among the inexpensive 4-liter models, it is also worth noting, for example, a thermopot. It costs 1.3-1.5 thousand rubles. Power - 800 W. Here, too, everything fully meets modern requirements. Metal body. The flask, of course, is also made of metal (stainless steel), indicating fullness. Temperature maintenance - 1 mode. Electric pump and hand pump for water supply. Water supply by pressing the cup on the valve. Central contact. Switch-on blocking in the absence of water, automatic shutdown when boiling over, overheating protection.

More spacious, but at the same time, invariably inexpensive models. In thermopot Supra TPS-3004 holds up to 5.5 liters of water. In the characteristics of the model in many online stores, a capacity of 5 liters is indicated, but if you fill the thermopot to the FULL (“full”) mark, you get exactly 5.5 liters, and this is the volume indicated on the body. The water flask is metal, the body of this model is plastic. The power of the Supra TPS-3004 thermopot is 750 W. In temperature maintenance mode - 65 W. An electric pump is used to supply water, but there is no manual pump. On the one hand, there is a disadvantage. But on the other hand, power outages are a rarity these days, although they do happen. In general, a minus, but a minor one. There is a “Re-boil” function. Electrical contact is central. The thermopot lid gets blocked during operation. The thermopot will not work without water. There is a removable filter that retains scale. The cost of the Supra TPS-300 thermopot is about 1.5 thousand rubles.

A little expensive

Let's raise the price bar. Maximum - 3 thousand rubles. In this price segment we already come across models from recognized global manufacturers of household appliances, with the best functionality. For example, thermopot. It will cost 2.9 thousand rubles. It has a white plastic body and a 3 liter metal flask. Power - 650 W. The boiling time of water (at full thermopot and ambient temperature not lower than 20°C) is about 20 minutes. Power in temperature maintenance mode - 65 W. There are three temperature maintenance modes: 60, 85 and 98°C (for various drinks, cooking various foods). The desired temperature is set by selecting the value on the display (the corresponding button). The thermopot first boils water (while the display shows temperature changes in 5° steps), and then it cools down to the selected temperature. When the water reaches the desired value, this is indicated on the display and the thermopot goes into mode to maintain the user-selected temperature. There is automatic forced boiling (it turns on when adding water if its temperature drops by more than 5°). There is also a “Reducing chlorine content in water” mode. In essence, this is a long boiling (at least 3 minutes) during which the chlorine content in the water decreases. Pouring water into the cup is done using an electric pump. There is no mechanical pump.

The Toshiba PLK-30VETR (W) thermopot also has a “Cleaning” function. The device descales itself. True, he does this not in some high-tech Japanese way, but in a completely folk way - using citric acid. The instruction manual says this: “Fill the thermopot with water to the maximum level, add about 50 g of citric acid, close the lid and press the CLEAN button.” The entire procedure takes 90 minutes (a report appears on the display). After its completion, the manufacturer recommends pouring water out of the thermopot and removing dirt. And to remove the smell of citric acid, fill the kettle again “to the brim” and set the maintained temperature to 98°C. Boil water and pour it out. In general, it’s good that cleaning is separated into a separate function, of course. But experience suggests that the procedure in this case is too long...

Thermal heat costs a little less - 2.7 thousand rubles. Power - 700 W, in temperature maintenance mode - up to 46 W. TO The “highlights” of the model include the absence of an electric pump - there is only a mechanical pump. Some may find this inconvenient. But on the other hand, it’s not so difficult to press the water filling key (although, according to some users, it is “a little tight”). But when the electricity goes out, the user is not deprived of hot water (at least for a while, until the water completely cools down, because maintaining the temperature does not work either, the heat is retained only thanks to the metal thermos flask). In general, everything here is subjective, just be aware of this particular feature of this model.

The maximum capacity of the Panasonic NC-PG30 thermopot is 3 liters of water. It has 2 temperature settings: 60°C (for preparing baby food) and 98°C (for coffee, tea, noodles). In principle, the manufacturer could add at least one more mode (80-85°C, the temperature is relevant for preparing some drinks). There is a “Reducing chlorine content in water” mode (activated by long pressing the “Boil/Repeat” button) - the water is boiled for a long time (6 minutes), after which the chlorine content in it is reduced by about 80%.

There is a delayed start timer (you can delay the start for 6 hours). There is also descaling (it should be done once every two to three months), also using citric acid (or even pieces of lemon wrapped in gauze). There is no separate button for this function; activation occurs by long pressing the “Select” button. The duration of the procedure is less than that of the Toshiba model - 42 minutes. It’s funny, but the manufacturer suggests purchasing citric acid only at service centers and official Panasonic dealers. Based on the instructions Operating manual for thermopot NC-PG30, only Panasonic citric acid should be used for cleaning! To “Culinary Eden,” this approach seems like a bit of an exaggeration: regular store-bought citric acid is quite suitable—checked.

Of the more spacious ones (but costing no more than 3 thousand rubles), we liked the thermopot of the already mentioned brand Polaris - model PWP 4012D. The metal thermos flask of this thermopot holds up to 4 liters of water; the body of the device is also metal (double walls). The control is electronic, there is a large (for this type of device) display that makes it easier for the user to “communicate” with the thermopot.

Polaris PWP 4012D has four water temperature modes: 45.65, 85 and 98°C. You can pour water into a cup using an electric pump or a mechanical pump. There is a delayed start timer (up to 24 hours). For example, you can set up a thermopot so that hot water is ready in the morning, for breakfast (since the water boils slowly in a thermopot, the ability to turn it on in advance is very important). The “Re-boil” function has been implemented. There is a lid lock operating time of the thermopot, blocking the water spill (electric pump and pump), automatic shutdown of the device in the absence of water. For ease of operation, the design of the thermopot provides a central electrical contact. The cost of the Polaris PWP 4012D thermopot is about 3 thousand rubles.

Half a liter of water more (4.5 l) fits in a thermopot. The cost of the model is about 3 thousand rubles. In terms of functionality, this is an analogue of the Toshiba PLK-30VETR (W) model mentioned here earlier. The same three modes of maintaining water temperature, a mode of reducing the chlorine content in water, and cleaning with citric acid. Boiling time for 4.5 liters of water is 36 minutes. Power - 650 W, up to 65 W - in temperature maintenance mode. Among the differences is the presence in the Toshiba PLK-45SDTR (W) model of two water pouring modes: soft (water pours slowly, for safe filling of cups) and normal (for filling larger containers). In addition, the Toshiba PLK-45SDTR (W) model has an “Energy Saving” operating mode. When activated, heating is performed with less power and less intensity.

Epilogue

Thermopots, undoubtedly, combine many advantages compared to a regular kettle. However, despite this, it is worth understanding that thermal sweat is not suitable for everyone. For example, if you are only at home in the morning and evening, why do you need to keep the water hot all day? Thermopot is convenient for people who are often at home (for example, for many pensioners), for families with small children (there is always hot water - not necessarily boiling water - for preparing baby food), for families who often receive guests.

Daniil Golovin