Working with paints, obtaining different color schemes, and thereby conducting experiments is an interesting activity. A simple person can get carried away - an amateur, a professional artist. Experimenting, creating and enjoying the process is great! In this article we will also try to experiment. Let's find out what happens when you mix red and yellow.

Receiving flowers

It must be remembered that there are 3 main paint colors - blue, red and yellow; they cannot be obtained independently.

And the rest obtained by mixing are shades. What happens when you mix red and yellow? What color will it be? By mixing primary colors, secondary shade results are obtained. For example, if you mix:

• blue and red, you get an excellent purple tone;
• yellowish with red – orange;
• blue with yellow - green.

It is impossible to get black and white on your own - these are exceptional tones. If you add white to the paint, the shade will change and will look much lighter, but if you use black, the opposite effect will occur.

Mixing table

Basic tones	Mixing	Nuances
Rich red color and yellowish tonality quite bright	Using one part red and two parts yellow, you get a bright orange color.	Adding large quantities yellow becomes lighter, and when adding red it becomes darker
White, brown and yellow	Take an equal percentage of paint, you get the perfect beige shade	When using white in greater quantities than indicated, the tone will be lighter, and when using brown, on the contrary, it will be darker
Red, yellow, green and black	If you mix these tones, you get an excellent mustard color.	Of course it will be lighter when adding yellow and darker when using a large percentage of black
Brown, yellow and red	If you take 2 parts brown and yellow and one part red, you can get a golden hue	It will be brighter and more saturated if you use a slightly higher ratio of yellow paint.
Yellowish and brown	If you take one part brown and two parts yellow, the color you get is ocher.	The tonality changes depending on the amount of adding a particular shade
Red and white	If you mix these colors, you get pink color	You can vary it by adding red or white, depending on these conditions and get the saturation of shades

The required paint tones are not always available in retail stores, so the best solution will receive them himself.

When deciding to get color scheme at home you need to be patient and at the same time have a good mood. This manifestation of independence has some advantages:

• You can get positive emotions from experiments.
• It is not forbidden to vary numerous times.
• You will still get the desired color.

On video: how to mix colors.

Any artist knows that a picture painted with his own hand must be alive and the appropriately selected tones must also be natural, which are obtained using trial methods.

The perceived painting should not contain more than three colors of paint, then it will be an artificial masterpiece.

In order to carry out work on mixing tones efficiently and the result exceeds all expectations, you need to know some rules:

• Do not mix paints made on different bases. For example, on oil and water, everything should be uniform. Otherwise nothing will work out.
• It is not recommended to use expired coloring agents, as the pigment in them has settled to the bottom and is unlikely to mix with the base again.
• It is very difficult and almost impossible to choose the same shade that was previously there. In rare cases, this can be done by professionals, but for amateurs it is best to prepare a new color scheme.
• Before directly mixing the paints, it is necessary to thoroughly stir each color separately, so the quality will be clearer.

Red and green combined give a dark Brown color. But its shade and intensity depend on the chosen proportions. the main role in this combination belongs to the color green. The darker it is and the greater the proportion used, the more intense the brown color, even black.

If you mix blue and green, what color will you get?

Blue and green - we get the color of turquoise or sea wave. The more intense the blue tone, the more dominant it will be in the shade, approaching turquoise. The predominance of green makes the shade of sea wave greenish. With an equal proportion of colors, a rich blue tint is obtained.

If you mix yellow and green, what color will you get?

Combining yellow and green, we get a light green or light green tone. In order for it to work out, the proportions of the colors must be the same. By adding green to yellow, we get an olive tint; if there is very little yellow, we get deep green with a blue tint, that is, it all depends on the proportion.

In addition, primary colors can produce many other shades. For example, when combining red and blue you get purple. Which, depending on the proportion we use, can range from a light, almost transparent lavender shade to a rich purple. Yellow and red produce a vibrant orange hue.

Advice! If you try to mix all three main shades at the same time, you will get an indefinite dirty brown color with a blue tint, it is called complex.

By experimenting with primary colors, taking into account the basic rules of color, you can achieve any desired shade.

How to mix colors - video

Modern interior design is full of original shades. The range of finished products does not always contain the required halftone. A color mixing table will help you get the desired result at home. The information will be useful not only when renovating an apartment. Knowledge about mixing colors is useful to a wide range of people: novice painters, auto repair workers, decorators and other creative people.

Mixing experiments: what you need to know in advance

The world around us is filled with wide color palette, but all the colorful splendor is based on three primary colors: blue, red and yellow. It is by mixing them that the desired halftone is achieved.

To get a new shade, use base colors in different proportions. The simplest example of how to get green color. The answer is extremely simple: mixing yellow dye with blue. A visual table of primary, secondary and transition colors obtained by mixing is presented below:

This table will help you understand that the question of how to get yellow is in itself incorrect. It cannot be achieved by combining other components, since yellow belongs to the three main tones. Therefore, when the need for yellow arises, they purchase a ready-made dye or extract the pigment from natural products, which is not entirely advisable.

The same initial colors, taken in different proportions, when mixed, give a new result. The larger the volume of one dye, the closer the final result after mixing will be to the original shade.

Experiments must be carried out taking into account generally known rules. If you combine chromatic colors, which color wheel are close to each other, after mixing they obtain a paint with a pronounced chromatic tint, although it does not have a pure tone. The combination of dyes located in opposite directions leads to the formation of an achromatic tone, in which a gray tint predominates. Navigate in optimal combination The chromatic circle will help you paint:

Attention! Mixing dyes does not always lead to a lasting result. Some paints, when combined, provoke a chemical reaction due to which decorative coating subsequently cracks. There are cases when the desired background turns gray or darkens over time.

For example, if you take red cinnabar and lead white, the resulting bright pink color will darken after some time. It is advisable to take the most limited amount of original paints to obtain the desired tone. When mixing, their compatibility must be taken into account. For example, oil-based dyes are sensitive to solvents. It is better to immediately exclude materials that darken or quickly fade. A table of combinations that should not be used will prevent errors in the creative process:

Variety of shades of red

Red consists of a trio of original colors that make up the base. Therefore, even a minimal set of paints cannot do without it. However, the question of how to get a red color when mixing paints sometimes still arises. This happens because magenta is involved in printing, so creative searches for how to get red are natural. Everything is solved extremely simply: to obtain natural red, yellow is mixed with magenta in 1:1 volumes.

The color scheme of red is diverse, so there are many combination options:

Comment! A beautiful purple color cannot be obtained by combining violet with red. The only way to achieve bright shade- find red paint without yellow impurities and mix it with blue.

The variety of shades of red is demonstrated by the next circle. It is worth noting that adding white paints to any mixture leads to lightening of the tone, and black ones to darkening.

The table below will help you understand the names of shades of red:

Variations of blue

An equally rich palette of shades is obtained by mixing with blue dye, which is part of the basic triad. Therefore, its presence in any set is mandatory. However, even a set of 12 colors sometimes does not meet the needs for a true blue tone. The reason is color variations. The classic tone is called royal, and on sale it is often replaced by ultramarine, which is characterized by a bright dark shade with a slight presence of violet. So the question is how to get Blue colour no longer seems absurd. The way out of the situation would be to add to base color white in a ratio of 3:1. Blue is obtained in the same way, only more white is used when combining.

An interesting color of blue with a moderately saturated result is obtained by combining darkish ultramarine with turquoise.

• Equal volumes of blue and yellow dye will give a dark blue-green tone. The introduction of white promotes some lightening, but the brightness is reduced. The reason lies in the combination of three components, and the more there are, the duller the color turns out.
• To obtain turquoise, mix cyan blue and add a slightly smaller amount of green. This shade is also called aquamarine.
• The color obtained from equal volumes of blue and light green is called Prussian blue. When white is introduced, the saturation decreases, but the purity of the hue does not go away.
• Blue and red colors in a 2:1 ratio produce blue with a hint of purple. The resulting color is lightened by adding white.
• Mixing equal parts of blue and pink magenta will give a royal blue, which is characterized by unusual brightness.
• Blue can be darkened by mixing it with black in a 3:1 ratio.

A table with the names of shades of blue will be an assistant in mixing experiments:

Variety of green

The original green is usually present in all sets; if the required dye is not available, there are no problems obtaining it. Pairing yellow with blue gives the desired green background. But any direction of creativity, be it painting, interior design or another option for decorating objects, requires a wide palette of green. The basic principle of all experiments is to change the proportions basic colors, white or black dye is used to lighten or darken the background.

• The combination of blue and yellow with a small addition of brown represents khaki. Green with a small amount of yellow forms olive.
• Traditional light green is the result of mixing green and white. Adding yellow or blue will help regulate warmth.

  ​Attention!

• The quality of the starting components affects the saturation of the green color. The more intense the base tones, the brighter the blending result will be.
• A yellow-green effect can be achieved by combining yellow and blue in a 2:1 ratio. The inverse proportion will result in a blue-green tone.
• Dark green color is achieved by adding half the amount of black.

A warm light green background is formed from a mixture of white, blue and yellow paint in a 2:1:1 ratio.

The circle demonstrates a variety of green colors. The base dye is located in the center, followed by the additional component, and then the result of mixing. The last circle is experiments of the resulting tone with the addition of white and black dye.

The next table will become an assistant when conducting experiments.

Other shade combinations

The color kaleidoscope is not limited to combining basic dyes. For example, gray is often required. Different proportions of white and black pigment will give a wide achromatic palette. How to get color Ivory

? The base color will be white, with ocher and dark brown gradually added in small portions. Ocher promotes warm tones, increasing brown leads to a cold background.

Another table shows the many mixing options:

How to get black? By combining cyan, yellow and magenta. They are not always available, so three basic dyes will help. Combining green with red will also give some semblance of black, but it will not be pure.

Conclusion