It’s not difficult to make it yourself, and almost all of its components can be found at home.

DIY snow globe| Components

• Jar with screw cap. Ideally, the lid should be screwed on tightly. If you take a jar and a lid from ready-made canned food, do not count on it being sealed. I took a jar of compote, so I had to strengthen and seal the threads to prevent leakage.
• Decorations. Would be good for this role Christmas decorations. Houses and Christmas trees look especially good with snow on top. I didn’t take this moment into account right away, so I had to take a lot of shots so that Santa Claus’s face wouldn’t be hidden in the snow.
• Glue. Glue is needed to glue the decoration to the lid. Many people praise the glue gun, but I didn’t want to buy one specifically for the snow globe. I made do with a tube of super glue.
• Imitation of snow. It could be artificial snow, glitter or even shredded white plastic utensils. I bought regular silver glitter, but in the process I realized that they didn’t fit color scheme to our ball. It’s not so easy to find artificial snow in a small town, so we had to limit ourselves to homemade “snow” from plastic toy packaging.

Homemade artificial snow

• Glycerol. It is needed so that the “snow” falls slowly. This occurs due to an increase in the viscosity of water. The amount of glycerin depends on the type of “snow” chosen. Large snowflakes will require more glycerin. I have a 400 ml jar. It took 4 bottles of glycerin, 25 grams each. With a 1:1 ratio of water and glycerin, snowflakes will float in the water almost without sinking to the bottom.
• Water. If you decide to make a ball for long-term storage or as a gift, then you will need distilled water and some kind of disinfectant for jewelry. There is no guarantee that the jewelry is sterile and that its microbes will not cause cloudiness in the water. For a ball that is not planned to be stored for a long time, any clean, clear water will do. I used tap water. The first time I was unlucky, there was a whitish sediment in the jar, which spoiled appearance. For the second time, I used pre-settled water.
• Rubber medical gloves. They are needed if you are not sure about the tightness of the lid. Gloves are convenient to use as a sealant for threads.

DIY snow globe| Assembly algorithm

At this stage, the ball is ready, and the next portion New Year's mood received.

If you liked the material, write about it on your favorite forum about babies and add a link to this page to your post or repost this post on a social network:

Also don't forget to subscribe to or join the group.

Useful links.

Many of you have seen a souvenir in the form of a transparent jar or bottle, inside of which fresh flowers, petals and herbs are intricately arranged. Today we will tell you how to make such beauty with your own hands. You'll be surprised how easy it is.

Even children can handle this master class. By the way, in art schools they often learn this technique. And this is understandable: simple, harmless components and an absolutely amazing result.

Those who love flowers, care about them and always have a hard time parting with gift bouquets will especially like our tips. Now you have a chance to preserve the flowers dear to your heart for a very, very long time. Not in their original form, of course, but it’s still better than throwing the plants in the trash.

What do we need?

• clean transparent container (preferably glass - it’s more impressive)
• hot water
• glycerin (you can find this in craft departments or even at the pharmacy)
• petals, flowers, herbs
• wooden skewer
• water-soluble dyes (optional)

How to preserve flowers in glycerin?

The bottle needs to be thoroughly washed and dried. If the plants have stems, the ends should be split in half by a few centimeters (or millimeters if they are short). This is necessary so that the solution penetrates better into the flowers.

Tip: Do not use plants with damaged leaves. Also, do not take petals that are too thin, almost transparent.

In a separate container, mix water with glycerin in a 2:1 ratio (two parts boiling water, one part glycerin). Let the mixture cool until room temperature and pour it into our transparent container.

We immerse petals, herbs and flowers into the bottle. Using a wooden skewer, we “seat” them the way you like.

If you want to give the accessory some color, you can tint the water in advance using a natural dye (necessarily natural, since flowers do not tolerate chemicals). If uniformity of coloring is not important, but, on the contrary, you want a kind of fancy pattern, add the dye after you have mixed water with glycerin and poured the solution into a container.

Close the craft with a lid. In this form, it will be stored for at least a month (if there are only herbs and dried flowers inside - much longer). The solution will then become cloudy and will need to be replaced. To do this, simply pour the contents of the container into a bowl and carefully separate the plants from the liquid. Prepare a new solution, fill it, and you can leave the flowers the same.

The whole family can make crafts on New Year and winter themes. This activity is exciting and will greatly unite the household. It’s frosty outside and the wind is shaking the trees, it’s cold and dark, and you’ve all gathered together at one table to create a small family masterpiece: magic jar with snow. In the warmth and comfort there is always something to talk about, both small and large. And you are also busy with useful work, the result of your efforts will only be a small miracle of yours. You can even feel like a wizard. A New Year's item will decorate the apartment and always remind you to get together like this more often. And, of course, all relatives will appreciate a family gift, because handmade things contain a piece of the soul.

What you will need for work:

A small jar with a screw cap.
A decorative plastic element such as a Christmas tree, a snowman, or any other product of a suitable theme.
Glycerol.
Glitter.
Tinsel.
Scissors.
Hot glue gun.

• First of all, clear the jar of stickers and fill it exactly halfway with water.
• Fill the remaining space of the jar with glycerin. We pour it heaped, so to speak.
• Glue the product you have chosen to the lid of the jar; for example, let’s look at the Christmas tree. It is best to degrease the surfaces to be glued and make cuts for better adhesion. You can use other waterproof glue in your work.

• Add glitter and small tinsel to water with glycerin. Close the jar tightly. If there are air bubbles, add water or glycerin. The lid must fit tightly to the jar. To be sure, you can put it on glue.

Now all that's left is to try it out. Turn over and shake your jar of snow and enjoy the “Winter Magic” made by your own hands.

Video: How to make snowball(jar of snow) with your own hands

Young children will especially appreciate this. And you will spend many unforgettable and wonderful minutes in the company of your child. Good luck! Happy New Year!

6 299

Christmas tree in a jar. You've probably seen such New Year's toys: a glass ball filled with liquid, and inside there is some kind of snow-covered panorama, a house or a tree, and there is an imitation of snowfall. You can do something similar with your own hands.
Let’s call the project “Christmas tree in a jar,” well, I’ll just have a Christmas tree in a jar, and maybe you’ll have something else.

For the project we will need:
1. Jar with a lid.
2. Distilled water.
3. Glycerin (sold at any pharmacy).
4. Ceramic or plastic figures animals, trees and human figures.
5. Artificial snow, crumbly or glitter.
6. Epoxy resin and hardener (you can buy it as a set in the store).
7. Sandpaper.

First of all, you need to make sure that the jar is clean, you can, if you have it, take a round jar now there is a lot different forms, I will have a conical shaped jar. Next, you need to glue the figures, in my case the Christmas tree, to the bottom of the lid. We clean the bottom with sandpaper for better adhesion and glue the Christmas tree with epoxy resin. The resin is resistant to water and will last a long time, although it has a specific smell, but it will disappear.

Fill the jar itself with distilled water (do not fill the jar to the top). Be sure to add a little glycerin to the water, just a little (although I don’t know what kind of glycerin you have, add a little, if necessary, then add more). Glycerin changes the viscosity and density of water, it will stop our sparkles, our artificial snow, prevent them from falling to the bottom and guarantee our toy the effect of snowfall. Now we add our sparkles, or artificial snow to the jar (very small snow is not necessary for a good effect from large sparkles).

Then we screw in the lid with our Christmas tree, turn the jar over and shake it well. That's it, the Christmas tree is in the jar - it's snowing.
You can give the toy an additional design and place it on a pedestal, for example, a board in the form of a cut of wood. Add to that a couple of animal figures or fairy-tale characters. The lid can also be decorated, painted or covered with something, it is desirable that it be possible to open it, in case you decide to modify the toy, and that’s basically it.

DIY snow globe

Before the New Year, as before any holiday, the first question that arises is what to give to relatives, friends and loved ones. Preparation and an original New Year's Eve are also important. The most relevant surprises are certainly considered. We will make just such a gift in this master class. Recently, so-called snow globes have become especially popular, which you can not only buy, but also make yourself and at home. DIY snow globe will bring a lot of pleasure to both children and adults.

"Winter in a jar." Materials and tools:

• baked white, brown, yellow, green, black, cherry;
• liquid polymer clay;
• white acrylic paint;
• glycerol;
• hard brush;
• foil;
• waterproof silicone sealant;
• epoxy adhesive;
• toothpicks;
• small scissors;
• knife for polymer clay;
• Toothbrush;
• universal stack;
• small capacity;
• glass jar with screw cap;
• sparkles.

Stages of creation work DIY snow globe:

1. Form a ball from foil, press it slightly towards work surface and cover it with a jar on top to check whether it fits in it freely. It is necessary that there be a distance of about 3-4mm between the edges of the ball and the walls of the jar. If the ball fits tightly into the jar, it may not fit there after we cover it with clay. And then ours will be doomed to failure.

2. So, we have made sure that the foil ball fits freely through the neck of the jar. Now knead the white clay and make a cake 2mm thick out of it. Cover the ball with a flat cake, wrap its edges over the bottom of the ball and squeeze it well with your hands. We need the white clay to completely cover the entire foil. Now we place our snow hill on the center of the lid and cover it with a jar on top again. The hill should still fit easily into the neck of the jar.

3. Take the hill out of the jar and begin tapping its surface on all sides with a toothbrush.

4. Let's start making the house. To do this, mix white clay with brown to get a light brown color. We form the base for the house from light brown clay rectangular shape. Its size depends on the size of the house you want to make. IN in this case rectangle dimensions 2*1.5*1.5 cm. Using the edge of a knife, we make horizontal indentations on each side of the rectangle.

5. Cut off the corners from the top side of the house base with a knife.

6. Cut out the roof. To do this, roll out brown clay into a layer 0.2 cm thick and cut out a flat rectangle wide.

7. Place the brown rectangle across the edge of the knife and bend it in half.

8. We lower the roof from the knife and lay it on top of the house. From a small piece Using brown clay, we form a small pipe, apply it to the roof and use a toothpick or a thin glass to pierce it in the center.

9. Roll out the yellow clay thinly and cut out two small squares for the windows. We stick them on the sides of the house and in front under the roof. We sculpt a small door from cherry clay and also attach it to the house.

10. Mix light brown clay with a piece of cherry to obtain red-brown clay. Roll it out into a rope 1mm thick and lay out the contours of the windows from it.

15. Mix white clay with liquid clay using your hands until it becomes sticky. Then put it in a small container and add more liquid clay, mix thoroughly with a spatula until the consistency of a thick cream.

16. Insert the fence stakes into the recesses on the hill, and stick a snowman next to it. Apply the resulting “cream” of white clay on top of the house roof to make it look like snow, spread a little on the tops of the trees and on the side branches, as well as on the tops of the fence stakes. Now bake the product in the oven according to the instructions for the clay.

17. Now let's start assembling a snow globe with our own hands. Wipe the inside of the lid and the bottom of the product with cotton wool and alcohol. Mix both components of epoxy resin in the required proportion (see instructions for the glue) and glue the product to the center of the lid. Leave for several hours until the glue dries completely (from 2 to 24 hours, see the instructions for hardening time).

18. Once the glue has hardened, squeeze a small amount of silicone aquarium sealant under the rim of the lid. Wait until it starts to harden a little. And it won't stick anymore.

19. Meanwhile, pour water mixed with glycerin in proportions of 1 to 1 into the jar. Do not pour the liquid to the very edge. Pour glitter or crushed foam into the jar. Cover the jar with a decorative lid, screw it tightly, turn it upside down and make sure that no water leaks out.

20. Apply white to the bottom of the jar acrylic paint using a hard brush, tapping movements to make it look like snow.

21. Now all that remains is to decorate the lid to make our DIY snow globe even more elegant. You can wrap it with beautiful ribbons or rain, glue pine cones, Christmas tree decorations or anything else that your imagination tells you.

If you liked our site, express your “thank you” by clicking on the buttons below. Tell your friends. Thank you:)