How to properly glue glass wallpaper. How to glue glass wallpaper. Painting glass wallpaper

Wall finishing is a significant and time-consuming stage in the renovation of any room. The success of any renovation largely depends on the design of the walls. Very often, fearing the newness of materials and inexperience in working with them, people give preference to older, but proven materials such as wallpaper.

Manufacturers of finishing materials do not stand still, producing new types of modern materials, satisfying the needs of any home. Glass wallpaper is considered one of these achievements. Possessing a number of positive qualities, glass wallpaper is an excellent solution not only for ceilings, but also for ceilings. One of the qualities of this type of wallpaper is that by gluing the bulk wallpaper fabric, consisting of glass fibers, you get a perfectly flat, uniform surface, reliably protected from cracks.

In this article, we want to address the question “How to properly glue glass wallpaper for painting?”, which often arises among those who have already decided on choosing this type of wallpaper. Covering in detail all the stages, as well as the nuances (how to hang such wallpaper in corners, for painting, on drywall) that may arise during the gluing process. Supplementing the presented material with video instructions.

Characteristics of glass wallpaper

Such modern wallpaper has the following advantages:

possibility of painting

Thanks to its textured surface, glass wallpaper, just like vinyl wallpapers, can be used for painting, being painted with special paints. Applying paints can make the walls brighter and also increase the durability of the coating. At the same time, they can be repainted up to 20 times, maintaining their excellent shape and texture.

Fire safety

The glass fibers of this type of wallpaper are treated with a special fire-retardant compound that is resistant to high temperatures, which allows them to be glued both in tropical countries and in the immediate vicinity of heat sources.

Environmental Safety

The natural components from which the glass wallpaper is made are hypoallergenic and do not harm human health at all.

Wear resistance

The structure of the fibers from which such wallpaper is made allows it to withstand high loads, both at high and low temperatures. They wash well and do not accumulate dust.

Characteristics and advantages of glass wallpaper for painting video

Surface fiberglass wallpaper Thanks to its fibrous structure, it allows the laminated surfaces to “breathe” without allowing...

Preparatory work

Before gluing, you need to first remove the plaster, paint or. After the walls are cleaned, we clean them and level them with plaster. We carefully cover the cracks, paying more attention to the largest cracks, and clean the walls again. If you plan to glue glass wallpaper onto drywall for painting, then the surface for gluing is not puttied.

If the room in which the wallpaper will be hung tends to form mold, it is necessary to treat the walls with a fungicidal compound. Only after this can we prime the working surface.

What glue to use for gluing glass wallpaper

Let’s immediately say goodbye to the illusion that ordinary wallpaper glue can be suitable for this material. No. Textured surface This type of wallpaper is quite heavy, weighing significantly more than a regular sheet of wallpaper. Therefore, the adhesion or gluing must be of a higher grade.

Basically, together with the wallpaper, both the manufacturer and the seller offer their own high-strength glue, ideal for gluing glass wallpaper for painting. It is diluted with water in the proportions indicated on the instructions.

Features of how to glue fiberglass and glass wallpaper video

However, what should you do if you have not received proper advice on the topic of adhesive composition? In this case, from the huge range of adhesives on offer, choose one designed for gluing fiberglass wallpaper.

The nuances of gluing

The technology for gluing glass wallpaper does not differ significantly from gluing paper or. At the same time, the most an important condition is constant room temperature indoors and lack of drafts.

There are a number of features in wallpapering for painting:

Availability of workwear

Considering the structure of the fibers, it is easy to guess that when cutting panels, small particles will fall onto the clothing, getting on the skin. For safety reasons, we recommend wearing special clothing that protects you from the smallest particles of glass fibers. You should also take care of the safety of your working tool - your hands. Special gloves will help avoid irritation.

Glue quality

Remember: the stronger the adhesive, the later the next repair. Therefore, firstly, make sure that the selected adhesive is suitable for gluing glass wallpaper. Secondly, the basis of any glue is starch mixed with various chemical additives.

Gluing glass wallpaper for painting video

Even if you want to get a large number of ready-made wallpaper glue, do not dilute it with more water than indicated in the instructions. The composition should be applied not to the underside of the wallpaper, but to the wall itself.

Determine the front and back sides of the material

This is, in fact, extremely important, because the front side has an embossing or pattern, but the back does not. Usually the manufacturer makes marks on the reverse side using a gray or blue stripe.

Having a partner

Fiberglass wallpaper, like many other types of wallpaper, is better and more convenient to glue together. Regardless of the width of the roll, enlist the help of someone else, this will significantly simplify the work process.

Preparing and gluing glass wallpaper for painting

We cut the roll into strips of the required height and convenient for alignment; it is advisable to make a small allowance for a better match of the pattern. Wallpaper must be glued end to end. It is important to control that both the seams and the pattern match, so that the surface relief of the glued wallpaper is uniform. If after gluing you find any unevenness or air under the glass wallpaper, remove the air with a special spatula, wipe the joints, removing excess glue with a sponge or damp cloth.

You can visually familiarize yourself with the entire process by watching the video on our website.

To glue glass wallpaper for painting in the corners, you need to cut the canvas so that it extends 2-3 centimeters onto the adjacent surface. The next canvas is glued close to the corner, overlapping the adjacent wall. In this case, glue is also applied to the marked surface of the adjacent canvas.

The surface of the glass wallpaper can be painted no earlier than after 2-3 days. For painting, it is recommended to use water-based acrylic or latex paint.

Instructions on how to cover a ceiling with glass wallpaper video

Once you become more familiar with the process, you will be ready to renovate your home, decorating the walls and ceiling with original modern coating. Having applied the theoretical material in practice at least once, you can easily become a real repair guru for your friends and neighbors, because you know how to properly glue glass wallpaper for painting.

Painting walls is a popular method of decorating rooms. But many are frightened by the fact that preparing the surface for finishing works very difficult, because the paint will emphasize the slightest unevenness of the base. The technique of pasting walls and ceilings with special types of wallpaper for painting comes to the rescue. Afterwards, you can give the surface any color - you just need to paint the wall, and all the flaws will be hidden.

An excellent option for finishing any room would be glass wallpaper - a unique material widely used in renovation. Before gluing glass wallpaper, you need to choose good glue and carry out a number of preparatory activities.

Fiberglass - what is it?

Fiberglass wallpaper is a wallpaper that is used for painting and is based on fiberglass. The material contains: dolomite, limestone, quartz sand and other additives, from which “yarn” is prepared under the influence of high temperatures. By melting at +1200 degrees minerals turn into a liquid mass, from which thin threads like glass are released. Next, they are made into glass fiber cloth and used to create reinforcing fiberglass. At the end of the process, the glass wallpaper is impregnated with modified starch.

Attention! Fiberglass wallpaper is sold in rolls 1-1.05 m wide (narrower sheets are almost never found on sale), roll length is 12.5-50 m. Cost sq.m. varies greatly depending on the roll size, manufacturer, texture, and quality of material.

A specific pattern on the wallpaper is created through the use of fibers of different thicknesses during the manufacturing process. Typically, the designs give a roughness, but not too much relief, although larger decorations create the impression of volume.

Material properties

This type of wallpaper has plenty of positive qualities. They are incredibly durable, do not tear, do not deteriorate even when scratched, so their service life exceeds 30 years. Most brands of fiberglass can withstand up to 15-20 repaintings.

Basic specifications wallpaper:

density indicator - 125-220 grams per 1 m2;
weight sq.m. canvas - from 50 g;
whiteness - from 70%;
high fire safety (flammability class - G1, flammability class - B1, smoke generation - D1, toxicity of combustion products - T1);
no accumulation of static electricity;
reinforcing properties - strengthening the wall structure, previous finishing.

Before going on sale, markings are applied to the underside of the wallpaper. This is necessary so that the question does not arise: which side is this material glued to. The edge of the wallpaper is perfectly smooth, the pattern fits perfectly when gluing.

Advantages and disadvantages of glass wallpaper

The material is environmentally friendly, because phenol-formaldehyde and other harmful substances are not used in its production. High reliability, serious strengthening of walls, prevention of defects - the undeniable advantages of the material. The wallpaper cannot be scratched; even animal claws leave no traces on it.

Fiberglass wallpaper does not deform during shrinkage, since it almost does not change shape after the glue dries. The material can be used even in new buildings - it will “adjust” itself when the base shrinks.

Other advantages of the material:

Complete fire safety. This wallpaper is so non-flammable that it is used to cover fire escape routes together with special paint. They are even used in homes with stove heating near pipes, stoves - the material is not at all prone to ignition.
Possibility of leveling walls. If you paste wallpaper, small differences, unevenness, and defects will be hidden even without careful leveling and puttying.
Use in damp areas. Gluing glass wallpaper is acceptable even in the bathroom and kitchen - they are not afraid of direct moisture, humidity changes, and do not react to sudden temperature changes.
Vapor permeability. Wallpaper does not disturb the natural microclimate of the room and helps maintain parameters at the proper level.
Excellent hygienic characteristics. The material does not accumulate dust, remains dry and does not cause the growth of fungus, mold, it is resistant to dirt and chemical substances, it can be washed with any means.
No reaction to ultraviolet light. Fiberglass wallpaper does not fade under the influence of sunlight. But to maintain attractiveness for a long time appearance you need to purchase appropriate paint with increased resistance to UV radiation.
Hypoallergenic. Even allergy sufferers can paste a room with this material - there will be no reactions, because the wallpaper does not contain sources of allergies.

The material also has disadvantages. The cost of 1 m² in terms of money is quite high compared to other types of wallpaper. Due to the high cost of work, many refuse to purchase. Other disadvantages of glass wallpaper:

Difficulties with purchasing paints and varnishes. The material can be painted only with certain types of paints: acrylic, latex, those that have the desired structure. Other materials do not fit well and drown out the pattern.
Expensive glue. The usual cheap product is not suitable for such wallpaper. You will have to buy a special thick glue for glass wallpaper that can hold heavy canvases. The repair cost calculator here should also be used in advance, because the amount spent will significantly increase.
Difficulty removing the sheets. If you decide to remove glass wallpaper, you will have to work hard. Due to the impregnation with starch, they are very firmly connected to the glue and the wall.
Modest assortment. There are few types of glass wallpaper (compared to ordinary ones), although after gluing they can be painted and various design techniques can be used.

You will have to wear protective clothing when working with the material - when pasting walls, the wallpaper will scratch, because it contains glass particles. For the same reason, it is important to use a respirator when working, otherwise there is a risk of irritation of the respiratory tract. In general, it is recommended to buy glass wallpaper if you need to finish it for a very long time with the ability to regularly change color.

Selection of glass wallpaper

Fiberglass wallpaper is selected depending on the pattern - it can be smooth or embossed. A number of manufacturers fluff up fiberglass threads to make wallpaper decor look clearer. However, when saturated with glue, the fibers lie tighter, and the design still looks flat compared to vinyl.

Worth knowing! The quality of the product is assessed by its density right on the roll. But unscrupulous companies may saturate the canvas too much with starch to make it denser. After gluing, the impregnation gets wet and the material becomes loose.

It is better not to take a product from an unknown manufacturer, giving preference to proven brands, and carefully read the technical specifications stated on the roll. It is worth purchasing glass wallpaper with a density of 145 g/sq.m. If the density is not indicated, you need to rely on the weight of the roll. The heavier it is, the greater the density and better quality of the wallpaper, although the length of the canvas and the risk of excessive impregnation must also be taken into account.

The following foreign brands make high-quality wallpaper:

Vitrulan;
Oscar;
Wellton;
Nortex.

Material texture

To choose beautiful ones, you need to pay attention to their texture. All glass wallpaper can be divided into the following types:

Smooth. Their other names: fiberglass, fiberglass interlining. They are smooth, monochromatic, and have medium or low density. Professionals call such materials “cobwebs”. Most often, wallpaper serves as a ceiling covering, although it can also be glued to walls to give it an even appearance.
Embossed. They have increased density and a certain pattern. It is impossible to tear them apart with your hands. This material is made on a special weaving loom, and wallpaper with complex decor is made on jacquard looms.

Degree of glass wallpaper decoration

Fiberglass wallpaper is also classified according to the degree of decoration. They are divided into 2 groups:

Colored wallpaper. Rarely found on sale. Completely ready for use, plain or patterned.
Paintable material. Needs additional decoration using water-based paints.

They are made from fiberglass - it is used for technical leveling of problem areas. There are even liquid glass wallpapers, where the main filler is multi-colored fiberglass.

Type of glass fiber weaving

Most often there are 4 types of glass wallpaper on sale:

cobweb - used for painting, but more often for leveling walls, stickers on the ceiling;
herringbone - the pattern resembles a Christmas tree, they look quite simple;
matting - nice option decor, very durable;
diamonds - large beautiful decor, are often used in offices.

Purpose of glass wallpaper

According to application, wallpaper can be divided into ceiling (mostly smooth), wall (embossed), there are also universal options that are even suitable for gluing on stoves, escape routes, and various structures. Fiberglass wallpaper is widely used in the following places:

houses, apartments;
catering establishments;
offices, commercial establishments;
clinics, hospitals;
shops, shopping centers;
hairdressing salons.

Glass wallpaper gluing technology

To properly paste wallpaper, you need to strictly follow the technology. Tips will help even a beginner cope with the task.

Tools

To decorate the walls and ceiling you will need the wallpaper itself (the quantity must be calculated in advance), glue, a stepladder or stool. You also need to prepare:

wallpaper spatula;
drill with a nozzle for stirring glue;
water, bucket;
clean rags;
roller or brush;
knife or scissors;
pencil and tape measure, level.

Surface preparation

Walls, ceiling need proper preparation. There should be no serious holes, potholes, or protrusions on the base. The old coating should be removed, as well as dust and dirt. Failed wallpaper is moistened with water using a roller, or water is sprayed. Then remove the wallpaper using a metal spatula. Walls painted with water-based emulsion are simply washed with a rag or sponge. Oil-based paint will have to be removed mechanically - with sandpaper, a scraper; this can be done faster using a drill with a metal brush. It is also permissible to use a special remover for oil paints.

If there are already old glass wallpapers on the wall, you don’t even need to remove them. Only the places of swelling need to be pierced with a needle, glue must be injected inside, smoothed out and the canvas should be glued. Then a layer is applied to the glass wallpaper finishing putty, primer, then glue the new material.

Glass wallpaper is glued onto drywall after the joints have been puttied and glued with reinforcing tape. Then the joints are sanded, dust is removed, and the entire gypsum board sheet is primed. Apply 2-3 layers of putty to concrete and brick until the wall is smooth. Primers are required to be used before finishing with glass wallpaper. There are universal options and special primers for sale. different types grounds. PVA glue diluted 1:10 with water and applied with a roller is also suitable. Wallpapering begins only after the primer has completely dried.

Selection and preparation of glue

Almost every manufacturing company produces special type glue for glass wallpaper. For example, Oscar glue with a pigment is suitable, which helps to coat the canvas evenly. For country houses, other cold rooms are suitable for frost-resistant adhesives - Kleo, Pufas.

Important! Do not use regular glue for paper wallpaper- it is too weak and will not hold a heavy canvas. Some expensive glass wallpapers are already impregnated with glue from the inside; they just need to be moistened with water.

For proper breeding, you need to carefully read the instructions. After measuring the specified volume of water, it is poured into the bowl, glue is gradually added, and kneaded by hand or with a drill with an attachment. Mix the product for a long time so that no lumps remain. After 8 minutes, when the glue has swelled, it can be used. The consistency should be similar to thick jelly.

Pasting surfaces with glass wallpaper

Wallpaper is glued in the same way as other types. The finished adhesive is applied to the canvas or to the wall (as indicated by the specific manufacturer). It is better to do this with a roller and paint the corners with a brush. It is important to distribute the mass evenly, otherwise the material will not stick or will be too saturated with glue. The canvas is cut with a margin of 5-10 cm for the bottom.

Tips for working:

the first canvas is glued strictly vertically, which is checked by a level;
the wallpaper is smoothed from the center to the edges to remove air using a plastic spatula;
excess length is removed with a stationery knife or scissors;
the second canvas is glued end-to-end, the edges are applied so that the pattern matches;
the surface is also smoothed by hand, then with a spatula.

In the area of sockets and switches, the material should be glued with the electricity turned off. The outer boxes are removed, glass wallpaper is glued on, cutting the canvas crosswise. The excess at the outlet is immediately cut off with a knife. When working with wallpaper, there should be no drafts in the room; windows should be protected from direct sunlight.

Gluing material in corners

The outer corner can be done using this method. Glue the piece so that the edge protrudes 10 cm, apply adhesive to the other side. Wrap the fabric, press it to the corner. Glue the second strip overlapping and matching the pattern. Then, using a sharp spatula, cut the joint along both panels at a short distance from the corner. Remove both stripes at the top and bottom. Lubricate the joint with glue again and connect the material.

An internal corner is made as follows. The last canvas is placed 2 cm on the next wall. The material is too wide and trimmed. Next, the strip is overlapped. You will get a double layer, but it will not be noticeable when painting.

Finishing

After pasting the walls and ceiling, you need to wait until it dries completely. Next we proceed to final finishing. Purchase suitable paint based on acrylic or latex. You can decorate wallpaper using the following methods:

With a border. It is permissible to glue a border in the center. In this case, you will have to cut a strip in the wet material in the right place along the width of the curb. Next, the surface of the glass wallpaper needs to be painted (you can different colors top and bottom), glue the border.
With a stencil. Smooth wallpapers are usually decorated with drawings and patterns. Use masking tape to glue the stencils onto the already painted material, and paint over the hole in the stencil with spray paint.
Squeegee staining. After applying bright paint, glazing is done with decorative varnish with a metallic shade using a roller. After drying, pass over the varnish with a wet sponge, removing the top layer.
With azures. Instead of varnish, white, colored azure is used, it is applied with a brush. After 20 minutes, the product is leveled with a rubber spatula.

After completing the work of gluing and painting glass wallpaper in the room, it is important to carry out a thorough wet cleaning. This will remove any small pieces of fiberglass that have settled on the floor. 48 hours after pasting the wallpaper, you can ventilate the room well. In the future, it is recommended to regularly wipe the material and wash it - it does not require caution during operation and serves without any complaints for quite a long time.

Reading time ≈ 9 minutes

To hang fiberglass wallpaper on a wall, it is not enough to just buy it in a store. You also need to know how to properly glue glass wallpaper for painting. In this article we will look at the techniques for properly gluing this type of wallpaper on various surfaces and the main difficulties that may arise in the process.

Features of glass wallpaper

Fiberglass wallpaper is a special type of finishing material. They are made from special glass, which includes quartz sand, lime, soda and other natural ingredients. The glass heats up to high temperature and stretches into thin threads. A fabric is woven from these threads, which is then rolled into rolls and offered to customers in construction stores.

The advantages of this material include:

Among the shortcomings, the most common are:

High price. Even the simplest glass wallpaper will be several times more expensive than standard paper wallpaper.
Fragility. If glued incorrectly, the material may break right in your hands.
Difficult base preparation. Fiberglass wallpaper has low elasticity, so you need to glue it on a flat surface.

There are two types of glass wallpaper - smooth and embossed.

The first type is most often used to level the surfaces being tiled, eliminate minor imperfections in the walls and give them greater density.

Embossed wallpaper is used for final wall cladding. Standard models have a repeating pattern, most often - geometric figures. On special machines you can create more complex patterns, but this increases the final cost of the material and they are much more difficult to adjust when gluing.

Examples of possible designs

Preparing the base

Before gluing glass wallpaper, you need to prepare the wall, and you should start by removing old finishing materials. If wallpaper was pasted on the walls, then they begin to remove it from the edges, wetting this area with water and prying it off with a spatula.

Advice! If any area does not want to lag behind the wall after moistening, iron it with a heated iron through a wet rag. If necessary, this area is moistened again and lifted with a spatula.

Walls painted water-based paint, cleaned with a simple brush and rag. The paint comes off well, but you still need to be patient to completely remove the old finish from the surface.

If the walls were painted oil paints, then you can’t do without technological methods. Some craftsmen use an electric drill with a hard felt attachment for this. If there are no such tools, then you will have to scrape off the paint with a spatula or sandpaper manually.

After cleaning the wall of excess, it is primed and inspected for defects. At this stage, you need to find all the cracks and other imperfections and putty them. After repair work Another layer of primer is applied to the wall.

Preparation of the adhesive composition

The main secret of correctly gluing glass wallpaper for painting is the choice of adhesive mixture. For gluing canvases, you must use only special compounds. Regular glue for paper wallpaper will not work, since it is designed for a completely different weight, and fiberglass weighs much more.

You can buy suitable glue in the same store where you purchased the wallpaper itself. In this case, the seller will be able to help with choosing a brand. If you choose the glue yourself, we recommend purchasing the composition from the manufacturer of the purchased wallpaper. If this is not possible, then buy a product from well-known brands.

Advice! Pay attention to colored adhesives. They will be invisible after gluing the wallpaper, but they are clearly visible when applied. This will allow the glue to be applied evenly throughout the process.

Wallpaper glue is usually sold dry. It must be diluted according to the instructions included with it. The glue can also be sold ready-made in small buckets. It does not need to be diluted unless otherwise provided in the instructions.

Wallpapering the walls

With the exception of some features, gluing glass wallpaper is similar to gluing regular wallpaper.

Important! During the process of gluing and drying wallpaper, it is necessary to strictly observe temperature conditions. The procedure is carried out at a temperature of 18-25 degrees Celsius. It is necessary to completely exclude drafts and direct sunlight on the covered wall.

Let's consider step by step instructions How to glue glass wallpaper to walls, taking into account all the features of the material used:

Important! You can paint the wallpaper or do other things with it only after the glue has completely dried. This requires at least 24 hours. The exact drying time depends on the adhesive composition, temperature environment and relative to indoor air humidity. Professionals recommend starting to paint glass wallpaper only after 48 hours, when it is known exactly how securely the cladding has stuck.

This video shows in detail the entire process of gluing glass wallpaper to walls. This will help you quickly understand the intricacies of this technology and adopt them.

Wallpapering the ceiling

Sometimes the design of a room involves continuing the design on the ceiling. In this case, it would be wise to wallpaper the ceiling as well. This process is very inconvenient to perform alone, so we recommend getting help.

Fiberglass wallpaper is a unique material and the name itself raises concerns. In fact, there is nothing incomprehensible or secret in technology.

Fiberglass wallpaper - especially durable and stylish decorative coating. This material is made from natural raw materials and, unlike synthetic materials, is safe for human health. If your walls are full of small defects, your ideal choice is glass wallpaper; We will explain how to glue it. Surprisingly, hanging wallpaper yourself when choosing this type of material is a relatively simple task.

Gluing walls with glass wallpaper

When preparing the walls before gluing the glass wallpaper, you do not have to remove the old coating, provided that it does not peel off or crumble. If the reliability of the coating is in doubt, it is better to get rid of it. Cleaned walls need to be puttied, slab joints and large cracks reinforced with paint mesh (serpyanka), sanded and cleaned of dust. A weak adhesive solution can be used as a primer, although special deep penetration compounds are undoubtedly better. When choosing wallpaper glue, pay attention to the application features - not every glue is suitable for fiberglass wallpaper.

Recommendations for gluing glass wallpaper are, in principle, not very different from the technology for gluing any type of wallpaper. Temperature range at which gluing is carried out is +10…+25°С. Among the worst “enemies” of freshly glued glass wallpaper are also drafts and direct sunlight. Failure to follow these recommendations also naturally ends in the same way: the wallpaper peels off, immediately or some time later. Characteristic material - rolls are wound with the front side inward, and the back side can be marked with a gray stripe.

Using a sharp wallpaper knife, cut the roll into sheets along the height of the wall with an allowance of about 10 cm. The amount of allowance depends on the presence of the pattern; if the pattern is not strict, the allowance may be smaller. In addition, when gluing textured glass wallpaper without a pattern, a violation of the orientation of the canvases is not a disaster; the finished coating will keep the secret of your mistake.

Before gluing the glass wallpaper, glue is applied to the wall, slightly larger than the width of the wallpaper. The glue strip applied at one time should not exceed the width of the canvas by more than half.

Needed from a door, window or corner. To position the canvas strictly vertically, in the latter case, use a plumb line. The edges of the wallpaper are cut according to the pattern and the next sheet is placed end-to-end with the previous one. The wallpaper sheet is pressed against the wall with a plastic spatula. The joints of the sheets are smoothed last, pressing both sheets at the same time. The completed joints should be cleaned of excess glue with a damp, clean rag or sponge. The edge of the spatula should not touch the joint. Allowances are cut after fixing the canvas to the wall.

Painting glass wallpaper

Glass wallpaper is painted only after it has dried, i.e. a day or two after gluing. Before painting, the surface should be primed; very diluted wallpaper glue will do. Dried surfaces are painted in two steps with an interval of at least 12 hours. The paint should apply evenly, in a thin layer and completely cover the original color.

When choosing paint for glass wallpaper, decide what impacts the surface will be exposed to. If the walls often need to be washed, choose waterproof acrylic or latex paints, abrasion resistant.

How to glue glass wallpaper: preparing the base

Quality is largely ensured by equally high-quality preparation of the surface to be glued - glass wallpaper is no exception in this regard. How do you think hunchbacked walls with numerous potholes covered with high-quality wallpaper will look? Absolutely right - no way. It is for this reason that this stage of work must be given its due.

How to stick glass wallpaper: primer photo

The question of how to properly glue glass wallpaper involves the following surface preparation technology.

In principle, if in your opinion they have become smooth, then you can stop there - the good thing about any wallpaper is that there is no need to perfectly putty the surface, as they say, under the testicle. They hide many minor defects (scratches). The only thing you need to check here is the presence of sagging - wallpaper, as a rule, cannot cope with them. In principle, that’s all - having coped with this stage of work, you can move on to the actual technology for solving the question of how to stick glass wallpaper? But first you need to deal with the glue.

How to glue glass wallpaper to the ceiling or walls

It would be wrong to assume that gluing with glass wallpaper can be done using any adhesive - as with many other types of wallpaper, a special mixture has been developed for them. Fiberglass wallpaper is a rather heavy thing, and not everyone is able to withstand its weight. Moreover, special glue can be developed even for each individual type of fiberglass wallpaper - some are denser and, accordingly, heavier, while others may have less adhesion to the glue. In general, there can be many nuances, and for this reason alone, each of the manufacturers of this type of wallpaper also produces glue for them. There are also universal adhesive compositions for glass wallpaper - when resorting to their help, you should understand that even they are designed for material of a certain weight. In this regard, they are divided into two groups - adhesive for normal glass wallpaper and an adhesive composition for especially heavy fiberglass wallpaper.

Glue for glass wallpaper photo

Regardless of the type of glass wallpaper adhesive you purchase, the technology for its preparation is of great importance. In principle, all such adhesive compositions are prepared according to the same principle - a certain amount is poured into a container warm water(the required amount is usually indicated on the packaging), powdered glue is quickly poured into it and at the same time thoroughly mixed. As a result, not a single lump should form. Most adhesive compositions can be used after just five to ten minutes, but there are some that may take longer to swell (up to 1 hour). This point needs to be taken into account or simply purchase a ready-to-use adhesive composition for glass wallpaper.

How to glue glass wallpaper for painting or with a pattern: instructions

Let's start by dressing appropriately - the fact is that the crumbling small fibers of wallpaper of this type cause unpleasant sensations when they come into contact with the skin. If you've ever worked with, you'll probably understand what we're talking about - your body itches a lot, especially when you start to sweat. It is for this reason that it is better to wear long pants, a shirt with no less long sleeves, a hat, and if we are talking about solving the problem of how to glue glass wallpaper to the ceiling, then also safety glasses and a respirator. In general, you need to be fully equipped.

As for the technology of gluing glass wallpaper itself, it can be presented in the form of the following sequence of work.

To conclude the topic, I will say a few words about standard nuances. Firstly, do not forget about drafts - they should not have been, otherwise the heavy glass wallpaper will immediately end up on the floor. It will be possible to ventilate the room after 24 hours (or even more). Secondly, these are seams - careful fitting is not enough. In most cases, the joint must be carefully rolled with a special roller - this is done after some time, when the glue begins to dry a little. At this point, the joint needs to be slightly pressed onto the surface with a plastic roller - alternatively, you can use the corner of a wallpaper spatula.

Basically, that's all. As you can see, the question of how to glue glass wallpaper is not much more difficult to solve than gluing any other type of this finishing material. One could even say more, glass wallpaper is one of the easiest types of wallpaper to work with. But they should not be underestimated, since being easy to work with does not mean that you can relax and let everything take its course. Quite the opposite - here we need control and more control. This is the only way to stick glass wallpaper onto walls or ceilings with high quality and for a long time, and most importantly, without alterations.

	If your plans include the implementation of original construction projects, then you should definitely consider using this material. LVL timber is characterized by high strength, durability and, most importantly, provides freedom in planning. Read about the characteristics of this material in our article!
	The goal is to build wooden house. But there are quite a lot of options for wood building materials. How to choose the best one? We compared regular and laminated timber according to a number of characteristics. You will be able to evaluate the advantages and disadvantages of each solution and draw a conclusion about the advisability of their use. There are no bad or good building materials – context is important everywhere!
	Pair square meters there will never be too much space! If you have not yet insulated your balcony, then it’s time to get to work - winter is coming. It may not be very warm here without heating, but an insulated balcony will serve as a good buffer zone between the street and the room. 7 simple steps, which are difficult to do only in your imagination!