Among the many modern materials There are real universals that can be used in almost all areas of our lives. One of these unique products is holofiber, a development by Russian scientists that is increasingly squeezing out analogues from the market. What it is ?

Holofiber is a type of synthetic nonwoven materials and a registered trademark. In composition, it is a fabric made of hollow, spiral-shaped fibers that form a large number of air cavities (pores).

Description

The fibers in the canvas are arranged vertically or randomly. The material is porous, homogeneous over the entire surface, its density and thickness varies over a wide range (60 – 4000 g/m²).

Holofiber is produced from a chemical polyester compound using the thermal bonding method. The pre-treated raw material is passed through a wind tunnel, resulting in a layerless canvas being formed. Under the influence of high temperatures, the fibers are soldered together, which is more reliable than gluing; holofiber is strong, elastic and has impressive properties.

• Lasting– welded fibers are very difficult to break, they are structurally connected and do not have a weak point.
• Eco-friendly– the glueless production method allows us to minimize the content of aggressive chemical compounds in the material; it does not emit harmful substances and does not cause irritation.
• Biostable– does not rot, does not decompose, is not affected by fungus, mold and other microorganisms.
• Warm– due to the large amount of air contained between the fibers, holofiber has low thermal conductivity and retains heat well.
• Breathable– conducts air perfectly without creating a greenhouse effect.
• Elastic– holds any given shape well, does not roll, does not get knocked down.
• Soundproofing– the air between the fibers absorbs sound waves.
• Wear-resistant– is not afraid of active use, repeated washing, or thermal exposure.
• Incombustible– when ignited, it melts without increasing the area of ​​the fire.
• Unpretentious– easy to wash, dries quickly.
• Accessible– cheap raw materials and production method make it possible to obtain a material that is significantly inferior in cost to analogues.

The smooth surface of the fibers does not allow dust particles to accumulate, due to which holofiber is considered hypoallergenic - even people prone to allergy attacks will not worsen their condition from contact with the material.

Holofiber is 100% synthetic - polyester or polyester, which is the same. The fibers obtained from it are used in many fabrics, and the unique properties of holofiber are explained technological process. The absence of formaldehyde and other common reagents makes non-woven polyester fabric as close as possible to natural materials on environmental friendliness and safety. At the same time, all positive specifications synthetics - strength, durability, versatility.

The video describes the unique properties and range of holofiber:

Nonwoven materials under the Holofiber brand are produced by the only domestic plant in Moscow, Termopol. Although the canvas has analogues both here and abroad, they are significantly inferior to it in terms of basic parameters. Having a lot of advantages, holofiber has found very wide application:

• In construction– as a heat-insulating and sound-proofing material, as a filler in various filters.
• In the clothing industry– as insulation in outerwear for adults and children.
• At home– as a filler for pillows, blankets, mattresses, furniture, toys, covers, etc. Read about which pillow filler is the best in this material.

In addition, the canvas is used in space development, aviation, mechanical engineering and many other industries.

On the video - myths about holofiber:

Care instructions: wash correctly

How to wash pillows, blankets and other items? Holofiber is a durable and wear-resistant material that is not afraid of mechanical stress and high temperatures. Thermal bonding of fibers allows the fabric to hold its shape and maintain volume. They will withstand even an intensive washing cycle, if this is acceptable for fabrics combined with insulation.

You should not abuse the possibilities when the top is not very dirty, it is better to wash it on a delicate cycle, but a very dirty item can be spun in hot water at good speed. Even bleach is not prohibited when the case allows it.

Kinds

One of the main advantages of holofiber is its versatility. A variety of materials are produced from it, differing in parameters and purpose.

Advantages of holofiber over other materials

This material became widespread in 2005 and since then has successfully competed with similar insulation and fillers. To understand the reasons for the popularity of holofiber, it is worth comparing it with other non-woven materials and trying to understand which is better.

• Sintepon– synthetic polyester, produced by felting, gluing, thermal bonding or needlepunching. It is mainly used as insulation for clothing and filler for household items (pillows, blankets, toys). Unlike holofiber, it is not intended for industrial use, not suitable for construction industry. Synthetic winterizer is heavier, not as dense and durable, it quickly loses its shape and gets confused, even if it is carefully quilted. The structure of padding polyester is thinner, it has high thermal conductivity, and is cooler. Holofiber beats its predecessor in all respects; it is truly better.
• Sintepooh– a polyester derivative, spiral-shaped fibers are treated with silicone and joined together. The result is voluminous, elastic and soft material, whose characteristics resemble holofiber. It is used as insulation for clothing and filler for furniture and household items. Despite the similarity, it is inferior to holofiber in strength and density, which is why it is not used as a construction insulator and in industry. It is difficult to unambiguously determine the best among these two materials; they have almost equal capabilities, but due to its versatility, holofiber is still preferable.
• Pooh- this is not even a material, but a natural insulation, which is a type of feather cover. Down has practically no core; it consists of tiny soft fibers that retain air well and repel water. Down is an excellent insulation material, but it tends to fall off when washed, which worsens its properties. In addition, it accumulates dust and can cause allergies, and also creates a favorable environment for microorganisms. Used to insulate clothes and stuff pillows, blankets and feather beds. Being warmer than holofiber, down is inferior in performance characteristics, requires special care and will last less. In the case of down, naturalness is rather harmful; holofiber definitely wins over this traditional insulation.
• Comforel– synthetic polyester fibers produced in the form of tiny granules. Used as filling for pillows, blankets, toys and upholstered furniture. The characteristics duplicate one of the varieties of holofiber - balls. Not inferior in characteristics, but inferior in scope of application.
• Bamboo– natural fiber obtained from plant materials, a type of cellulose. Depending on the production cycle, a thread-like fiber is obtained for making fabric or a non-woven material used as filler or insulation. It is inferior to holofiber in terms of strength and other data and is most often used as an additive, successfully complementing synthetics. Reviews about bamboo fiber you can read it.
• Thinsulate- the thinnest and lightest of synthetic insulation, consisting of the smallest fibers. With minimal density and thickness, it is much warmer than other materials. This is a universal insulation material that is superior to holofiber in all characteristics. However, due to its high cost, it is not used as a filler, and it is not common in construction, so which material is better depends on the specific application.

What is the difference between holofiber and padding polyester?

When buying outerwear or bedding, you may encounter the fact that manufacturers use for the filling not the usual synthetic padding polyester, but some other newfangled material, say, high-tech holofiber. What should you give preference to and what is the difference between padding polyester and holofiber? Let's try to figure it out.

What is holofiber and synthetic winterizer?

- non-woven material made of pure polyester, produced by thermal bonding.

- non-woven material used as filler and insulation in the production of many products.

Comparison of holofiber and synthetic winterizer

What is the difference between holofiber and padding polyester?

Both holofiber and padding polyester are synthetic materials. But holofiber appeared later than padding polyester, and the technology for its production is different. To produce padding polyester, ordinary polyester fiber is used, but holofiber consists of hollow (hollow) fibers that are twisted like small springs. Synthetic winterizer is made by adhesive (an outdated, but still used method) and thermal method.

Sintepon is often made from recycled waste, which does not have the best effect on its environmental characteristics. In the production of padding polyester, glue (PVA emulsion) is often used to hold fibers together, which is why the material can quickly collapse (especially when wet). Often the synthetic winterizer does not withstand even several washes. When compressed, such a material is greatly deformed and “caked”. Due to unreliable fastening, the fibers of the material can “migrate” (move) in the product during its operation.

Holofiber is distinguished by the fact that it always returns to its original shape, very quickly recovering from crushing and compression. The material withstands numerous washes well without changing its properties. When producing holofiber, only high temperatures are used, no chemical or adhesive emulsions are used. Therefore, it is safe and recommended as a filler for children's things (crib bumpers, blankets, outerwear). The glue in synthetic padding can cause allergies, holofiber is an anti-allergenic, hygienic material. Holofiber fibers are not subject to “migration”.

Synthetic winterizer has average thermal insulation properties. Outerwear with padding polyester is only suitable for very mild winters. For harsh climates, synthetic winterizer is unacceptable. But holofiber has excellent thermal insulation (close to natural down) and is well suited for cold weather. Reliably retaining heat, it allows the skin to breathe. Sintepon is less breathable.

TheDifference.ru determined that the difference between holofiber and padding polyester is as follows:

Sintepon appeared on the market before holofiber.

The service life of padding polyester is shorter than that of holofiber.

Holofiber is somewhat more expensive than padding polyester.

Holofiber, unlike padding polyester, quickly restores its original shape.

The structure of synthetic fibers is disrupted over time, which contributes to the loss of quality and “caking” of the material. Holofiber is wear-resistant and not subject to deformation.

1. Holofiber is more environmentally friendly than synthetic padding (no glue is used in production).

   1. Holofiber has better thermal insulation and breathability than synthetic padding.

Among the many materials presented today there are universal ones, i.e. those that have found wide application in various areas of human activity. One of them is the development of Russian scientists - holofiber. It became widespread in 2005, and since then has been successfully pushing its analogues out of the market. The popularity of the material is due to its availability, durability and impressive range of properties.

What is holofiber

This synthetic material belongs to the category of non-woven fabrics. The structure consists of spiral-shaped hollow fibers that form many air pores (cavities). Due to this porosity, holofiber (translated from English as “hollow fiber”) is widely used as a heat and sound insulating material in various industries. Holofiber looks like fluff or cotton, but it performs better.

Compared to its natural competitors, holofiber does not bunch up, and during use it does not form textile lumps. The fibers in the canvas are arranged either vertically or randomly. The material is homogeneous over the entire surface. Thickness and density vary from 60 to 4000 g/m2. The material is produced from a polyester compound through thermal bonding.

Distinctive features

One of the main distinctive features The material is a porous, multilayer structure that is capable of trapping dust. Presence of pores different sizes fills the fiber with air, due to which it is used to organize a protective sound and heat insulation layer. The fibers have a spring structure, due to which the products easily restore their shape.

Holofiber is 100% synthetic: polyester or polyester, which is generally the same. Unique properties The fibers obtained from it are explained by the technological production process. The composition does not contain formaldehyde and other common reagents, thanks to which the polyester fabric is as close as possible to natural materials in terms of safety and environmental friendliness. All the positive technical properties (versatility, durability, strength) of synthetics are preserved.

What is the difference between padding polyester and holofiber

Manufacturers and consumers often have the question, which is better, padding polyester or holofiber? Compared to padding polyester, raw materials pre-processed for the production of holofiber are passed through a wind tunnel, resulting in the formation of a layerless canvas. Next, under the influence of temperature, the fibers are soldered - this option is more reliable than gluing. Thanks to this, the final product is strong, elastic and has a whole range of important properties.

As for synthetic padding, it is also synthetic polyester, but it is made by gluing, felting, thermal bonding or needlepunching. It is used as insulation for clothing and filler for household items, for example, blankets, pillows, toys (including those with magnets). Holofiber, in comparison, is intended for industrial use and is ideal for the construction industry, which cannot be said about padding polyester.

In addition, synthetic winterizer is heavier, but less dense and durable. It quickly loses its shape and begins to bunch up, even if it is carefully quilted. The structure of padding polyester is thinner, so it has high thermal conductivity - this option is not optimal for thermal insulation. When the name of the filler, such as silicone, is indicated in the characteristics of outerwear, keep in mind that it means siliconized padding polyester. It is superior in quality to conventional padding polyester insulation, because... Due to silicone treatment, it holds its shape better. True, it can get into clumps.

Differences from fluff and synthetic fluff

Down is not a material, but a natural insulation material, which is considered a type of feather cover. It does not have a rod, it consists of soft fibers that can repel moisture and retain air. Down is an excellent insulation material, but it can fall off when washed. In addition, it tends to accumulate dust, cause allergies and create a favorable environment for microorganisms. Used for stuffing pillows, blankets, feather beds and insulating clothes. Down is warmer than polyester fiber, but inferior to it in terms of performance.

As for synthetic fluff, it is a derivative of polyester, the spiral-shaped fibers of which are treated with silicone and connected to each other. The result is an elastic, soft and voluminous material, which is similar in characteristics to holofiber. It is used as insulation for outerwear and filler for upholstered furniture and household items. It is inferior in strength and density to non-woven polyester fabric, therefore it is not used in industry. Unambiguously determine best option difficult, but holofiber wins due to its versatility.

Types of holofiber

This material is not afraid of mechanical stress. Thanks to the thermal connection of the fibers, the fabric holds its shape and retains its original volume. It can withstand intensive washing, if this is acceptable for fabrics combined with insulation - you should not abuse the capabilities. Having decided to purchase it, to solve certain problems, decide on a specific type:

• Granule ball. This type of filler is produced in the form of spherical granules - the most popular type, which is widely used as a filler for blankets, pillows, products for pets, and decorative elements of upholstered furniture.
• Construction (sheet). This variety is used as insulation and sound insulator. Produced in the form of layers. It is used at the stage of construction, reconstruction, in order to improve the performance characteristics of a single room.
• Holofiber insulation. It is produced in rolls (webs), the thickness and dimensions of which depend on the manufacturer. Used as insulation for clothing.
• Formative. This variety is presented in the form of a three-dimensional canvas, which is designed to give shape to a variety of decorative products.
• Furniture. Canvas and filler for mattresses, upholstered furniture. It is a thick, dense and elastic material that can retain its shape well.

Qualitative characteristics of holofiber

One of the main advantages of the material is its versatility, due to which it has become so widespread. The smooth surface of the fabric fibers prevents dust particles from accumulating, making the material hypoallergenic. Even those with allergies will not worsen their condition from contact with fabric made from polyester raw materials. More details about features and benefits:

• Strength. This property is ensured due to the fact that the fibers welded together are difficult to break; they do not have a weak point, because connected in a structural way.
• Environmental friendliness. This is achieved through the use of a glue-free production method, which minimizes the content of aggressive chemical compounds in the fiber. The finished product does not emit harmful substances and does not cause irritation.
• Low thermal conductivity. This was made possible due to the large amount of air contained between the fibers. Due to this, polyester fiber retains heat well.
• Breathability. The canvas perfectly conducts air without creating a greenhouse effect.
• Biological stability. The material does not rot or decompose. It is not susceptible to mold, fungi and other microorganisms.
• Wear resistance. Polyester fiber is not afraid of thermal effects, repeated washing, and active use.
• Non-flammability. When ignited, the material only melts without increasing the area of ​​fire, so it is classified as non-flammable.
• Elasticity. It holds any given shape well due to its structure, does not get knocked down or roll down.
• Availability. Raw materials are relatively cheap, the production process does not require large expenses, and in terms of cost, holofiber is significantly inferior to many analogues.
• Unpretentiousness. The fabric is easy to wash and dries quickly.

Material properties

Holofiber is ideal because it does not require any special care. It does not absorb foreign odors and has a high tensile strength coefficient. In the light, the structure of the material is not destroyed. Due to high wear resistance and elasticity, it is becoming increasingly popular. Due to its low hygroscopicity, the material retains its plasticity even at low temperatures. Performance characteristics and properties:

List of characteristics
Layer height (m)
Air permeability (dm3/m2s)
Moisture retention capacity (1%)	No more than 1	No more than 1	No more than 1
Thermal resistance of 1 layer with natural convection (m2C/W)
Shrinkage after washing (%)
Resistance to repeated compression (%)	Not less than 71.5	Not less than 74.6	Not less than 72.7

Where is holofiber material used?

Possessing many advantages, this polyester fabric has found wide application, for example, in the production of workwear. The material is also optimal for making outerwear, including children's clothing. Hypoallergenic, sensitive to individual microclimate - it is very comfortable in winter time. Non-woven polyester fabric is also suitable for organizing landscape design as a hardening base.

Other applications:

• light industry;
• construction area;
• furniture manufacturing;
• mechanical engineering;
• aviation, space development, etc.

In the production of upholstered furniture, the fillers used differ in density. Some have the ability to form, while others do not:

• hard (hard) – used as a structural and flooring material for individual parts upholstered furniture;
• medium (middle) – forms the top layer;
• soft (soft) – intended for quilted elements.

In construction

Professional builders have appreciated holofiber, which is why it is actively used to fill the space between walls during the construction of various objects. In this case, it acts as a heat and sound insulating layer. Not only inter-wall fiber insulation is widely used, but also under-roof, inter-crown and acoustic options. They are produced in the form of light elastic sheets and universal sheets, which are cut extremely simply, even by hand. In addition, this non-woven material is used as a filler in filters.

In the textile industry

Non-woven fabric is widely used for the manufacture of outerwear for adults and children. In addition, the material is good as a filler for pillows, blankets, mattresses, covers, etc. It is also used to make furniture upholstery, lining for jackets, and coats. It holds its shape perfectly, withstanding washing without loss of volume, after which you don’t need to think about restoring its shape, which cannot be said about down and feathers. An interesting alternative is thread-like fibers made from bamboo cellulose, but they are inferior to holofiber in strength.

Holofiber filling in jackets

In jackets, this non-woven material is used as a filler due to the fact that it retains heat well, is very light, and easy to care for. Compared to natural analogues, it is cheaper, but keep in mind that with frequent washing and wrong choice mode in washing machine, the fibers will lose their original shape over time. Winter jackets with such filling have unique characteristics: high strength, low thermal conductivity, and environmental friendliness.

At home

Canvas made of hollow spiral fibers are used for filling furniture, blankets, mattresses, toys, covers, etc. The canvases have excellent breathability, which is one of the main requirements for flooring materials and padding in frameless furniture. The fibers are characterized by high tensile strength and resistance to repeated bending, and this affects the durability of the final product.

Holofiber care

The material is not afraid of mechanical stress and high temperatures (processing by boiling, dry steam), it can withstand intensive washing, but it is important to know the rules of proper care for it. Do not abuse the capabilities of the fabric: when the top is not very dirty, it is better to wash on a delicate cycle. You can use regular products washing powder, and in some cases even bleach will do. General rules:

• Regardless of what item holofiber is used in (be it clothing or bedding), it can be washed either by hand or in a washing machine.
• If the product is not very dirty, it can be cleaned without a general wash. With frequent washing, non-woven fiber will begin to lose its shape and quality.
• It is better to soak heavily soiled items in a soapy solution for a while - this will make the dirt come off easier. After this procedure, scrub heavy stains with a sponge or soft brush, and then rinse the items, wring them out and put them in the washing machine.
• Before washing, be sure to read the label on the item, because each product filled with holofiber has a top material, which can be natural or synthetic. This is of great importance when processing the product, for example, raincoat fabric should be washed at a temperature no higher than 45 degrees, and spinning will need to be done at a minimum number of revolutions.

How to properly wash a jacket or coat

It is better to soak dirty polyester jackets in soapy water in advance and, if necessary, rub the most contaminated areas. During washing, it is undesirable for holofiber to increase the water temperature to 70 degrees. This indicator should not exceed 40°C if the top of the jacket is made of membrane fabric, and you need to select a delicate washing mode. In this case, the powder cannot be used; as a last resort, use liquid dishwashing detergent or regular shampoo.

If the top of the jacket is made of bologna, then it is better to wash this product by hand. It is not recommended to strongly wrinkle the jacket and twist it after washing, because... Bologna wrinkles easily, and creases remain on its surface. Straighten the washed item without twisting it with your hands and hang it on hangers so that all the water drains from it on its own. If properly dried, a jacket or down jacket often does not require ironing, because holofiber is not prone to deformation.

Caring for pillows and duvets

When you decide to buy bedding for yourself and your child, made from a material such as hypoallergenic holofiber, read the rules for caring for them. Washing blankets with pillows is not much different from washing jackets or coats: it all depends on the degree of soiling, the type of top fabric, and the volume of the items. For example, a large blanket will have to be washed by hand, because... The washing machine is too small for it - you will need to prepare a soap solution in the bathroom.

How much does holofiber cost?

Holofiber-SOFT is widely used in sewing warm clothes, blankets, and products for children. This environmentally friendly product is non-toxic to the body and free of harmful impurities, cost:

Width (m)	Thickness(cm)	Density (g/m2)	Price per linear meter in rubles

Video

Hollofiber is a new generation non-woven material made from synthetic hollow fibers modern technologies. Light, elastic filler has a great ability to retain heat. Used for the production of all types of winter clothing.

Filler properties

Holofiber in a pillow

What is holofiber made of? The answer to this question is contained in the title, which is translated from in English stands for "hollow fibers". The filling is made of hollow twisted synthetic fibers. A high degree of torsion results in the formation of round polymer springs. A large number of winding cavities inside the fibers, the space around them allows you to effectively retain heat.

Holofiber is a non-woven material. Its components are connected by thermal method. When heated, the fibers fuse at the points of contact. The result is an elastic three-dimensional structure that can be easily compressed and then quickly regain its shape.

During production processing, almost all types of holofiber undergo a calendering stage, during which the structural components of the filler take the form of canvases. The exception is the high-volume type of holofiber, recommended for filling down jackets.

Holofiber software

Calendering of synthetic materials first began 10 years ago in the production of soft-type holofiber. This procedure greatly simplifies working with the filler and allows you to eliminate the need for quilting during subsequent sewing of products.

Most of the properties of holofiber are characteristic of all representatives of this class of materials.

• Thanks to special processing of raw materials, the filler does not spread flames and is highly resistant to combustion. This is an amazing quality, because it is known that all organic substances burn easily.
• Hollow fiber allows air to pass through well, permeability to various types filler is 5-6 dm³/m²s.
• The hygroscopicity of the filler varies from 0.6% to 1%.
• Holofiber polymer fibers have a low adsorption capacity, so the material does not retain foreign odors.
• Holofiber is absolutely non-toxic, which is confirmed by multiple tests during certification according to international standards.
• The filler is recommended for children's clothing and does not cause irritation when in contact with the skin.
• Holofiber is resistant to tearing forces.
• The material practically does not shrink when washed. Allowable shrinkage is from 2% to 5%.

Holofiber filler appeared on the market only 11 years ago, but has already firmly established its reputation as an effective, safe, durable insulation material.

Types of holofiber filler

Holofiber toy filler

By varying the technological production mode, several modifications of the filler are obtained. Each type of product has specific recommendations for use.

The softest, most elastic material is holofiber soft. It allows air to pass through well and does not create a greenhouse effect. Retains heat perfectly and restores its original shape after repeated washings. Migration of fibers in the filler is completely eliminated. The fabrics are used to make all types of outerwear for children and adults, special clothing for special conditions. Tourists' equipment is filled with this material.

Holofiber medium is distinguished by its special tenderness and accuracy of production. This filler is used to make products for newborns: pillows, small mattresses, crib guards, envelopes for winter walks.

Volumetric holofiber has proven itself to be a very light, practical material. This is the only modification of holofiber made without calendering. High-volume qualities allow the filler to be used for the manufacture of down jackets and down jackets. All properties declared by the manufacturer are preserved after prolonged wear and repeated washing. Possible fiber migration is negligible.

Hard holofiber hard fiber retains fixed shapes on upholstered furniture best. The filler is placed in the sidewalls, armrests of sofas and armchairs. Conventional and orthopedic mattresses are made from it. Canvases that have different stiffness on opposite sides support the anatomical shape of the body well.

How to care for holofiber filler

The material is durable, wear-resistant, can withstand temperature changes, and washes well.

• To wash holofiber, a delicate cycle and moderate temperature are sufficient. The material does not require harsh washing conditions.
• You can wash products made from filler by hand. True, this procedure is relatively convenient only for small products. Large bulky items are difficult to wash by hand.
• After washing, water drains easily and quickly from the holofiber. It's enough to just hang the wet item.
• Products should be ironed with a not very hot iron. In most cases, ironing is not necessary.

Holofiber fillers are high quality, safe, and comfortable. Clothes with such material are not afraid of frost and wind. Products with holofiber bring comfort and security to everyday life.

Reading time: 5 minutes

Nowadays, synthetic fillers will never surprise or scare you. In addition, many of them are in no way inferior to natural ones in their characteristics, or even surpass them. Holofiber is often singled out among innovative materials - what is it, and due to what qualities is it so widely used as a filler in clothing and bedding? The consumer is primarily attracted to its advantages and affordable price.

Holofiber, what kind of material?

This is a non-woven material based on spring-like hollow polyester fibers. This trademark was registered in 2005. The method for producing this fiber was developed at the Termopol plant.
The material has cavities sealed on both sides, thanks to which the final material receives its useful characteristics.

Available in several types:

• Canvas;
• Layer (slab);
• Twisted "balls".

The shape depends on the area of ​​use. Linen is most often used as insulation for outerwear, but holofiber in balls is simply irreplaceable in quality. Construction is another area of ​​application for this material. Here ideal option there will be slabs. Construction holofiber insulation retains heat in a room without creating a “greenhouse” effect.

Holofiber production

Nonwoven materials, which include holofiber, began to be produced in Europe in the 30s of the last century. In Russia, this industry began to develop in the mid-60s. In the 90s there was a sharp decline, as a result of which many studies were frozen. However, this area is currently being actively developed again.

For the production of material is used thermal method fiber bonding. Its peculiarity is that the elements are connected to each other under the influence of high temperatures. This method is absolutely safe, since no glue or other chemical components are used in production.

The basis of the filler is polyester fiber. Calendering is used to produce nonwoven material. Raw materials are exposed high temperature(180 degrees), resulting in reduced migration of components. In this case, the aerodynamic method of fiber formation is also used. Its peculiarity is that the elements will be located not in one, but in several directions:

• Chaotic;
• At an angle;
• Vertical.

To do this, the combed fibers are directed through a diffuser under the influence of air flow. They enter a conveyor or mesh drum, where a layerless structure is formed.

Hollofiber properties and characteristics

The photo shows what holofiber looks like

Holofiber – modern synthetic filler. It is distinguished by excellent wear resistance and softness. The scope of its application is wide: from outerwear to filtration systems.

Areas of use

Holofiber is a trademark. It produces a number of products that have heat-insulating properties and are used as insulation.

The scope of application is wide:

• Construction;
• Upholstered furniture and toys;
• Outerwear and professional clothing and headwear;
• Bed dress;
• Cleaning and filtration systems.

It is quite voluminous and has a porous structure. This makes it simply irreplaceable in construction. Such characteristics give it soundproofing properties, and it also retains heat well. It can be used for both multi-storey construction, and for private houses. By laying it in the space between the walls, you can reduce the amount of external noise.

Using holofiber slabs as insulation, you can forget about the penetrating wind and cold for a long time. If you want to insulate your balcony, then pay attention to this material.

Holofiber is an environmentally friendly product. It’s not for nothing that Termopol, which produces it, was called a “plant without pipes.” It does not spew tons of harmful substances into the atmosphere and does not discharge into rivers and canals. This confirms the safety of using the filler for children's clothing and toys.

It is non-toxic and does not cause allergies. In 2010, the Holofiber brand was awarded the title of “Well-known Trademark” and received a certificate confirming its hygienic and environmental safety. This suggests that even direct contact of the material with the child’s skin is allowed.

Several types of filler are used for upholstered furniture. They vary in density, so some are form-forming and others are not.

There are:

• Holofiber soft insulation (soft). Used for quilted elements, as well as as a forming top layer of soft parts;
• Medium (average). It is a substitute for block polyurethane foam. Serves as a formative top layer;
• Hard (hard). It is used as a structural and flooring material for upholstered furniture elements.

It also serves as an excellent option as insulation for raincoats and jackets. It makes the product incredibly light and comfortable. Such jackets are in no way inferior to down jackets in their characteristics. The advantage is that they do not require special care. You can easily wash the product in a washing machine without fear of the fibers becoming deformed.

Another not entirely traditional area of ​​application for this material is filtration systems. Holofiber can be used as an air filter. This is possible thanks to the porous multilayer structure. However, in this case it is necessary to pay attention to the location of the fibers - it should not be vertical.

Using holofiber for upholstered furniture in the video:

Rules of care

Holofiber is completely “not picky” in care. The basic rules are:

• Both hand and machine washing of products is acceptable;
• It does not require soaking before washing;
• For washing it is recommended to use a slightly alkaline detergent;
• You can safely dry the product in a centrifuge without fear that it will become deformed;
• In order to return it to its original shape after washing, you just need to shake the item;
• Ironing in a “package” is acceptable at a temperature not exceeding 100 degrees;
• Vertical drying of products is acceptable;
• Cleaning with all approved compounds.

If holofiber has become matted from numerous washes, it can be restored to its original appearance. To do this, you need to remove the filler from the product and “fluff” it with a brush.

This is not a capricious material both to use and to care for. It is very warm and light. In addition, no harmful chemical compounds or glue are used in its production. It is absolutely safe for both adults and infants. The scope of its application is quite wide, so it is available in several modifications: plate, canvas and balls. This makes holofiber a universal material.