When they talk about an iron hand, they usually mean either just a model, or The article will tell you how the first sample is made, and how it is turned into the second. But before we look at how iron is made, let's look at what science has achieved now.

About the state of affairs

Just 50 years ago, a person who lost his leg or arm could only dream that one day he would be able to make up for his loss thanks to scientific developments. And not just to get something, but to be able to function as if the organ was in place. Nowadays quite a lot of people are engaged in the creation of iron hands a large number of companies and technology enthusiasts. Simple devices that cannot perform the actions of fingers are simply called prosthetics. While those that can detect signals from human brain and react to them with bionic hands. Due to the high cost, not everyone can afford such a device, but you can make it yourself. The iron one may not turn out as perfect as that, but even this option is better than nothing at all. And now we suggest you familiarize yourself with how such a device is built and how it is made.

Device

An ordinary “cosmetic” iron hand looks like a human one. It can be made of plastic and already look like a regular one, or made of metal - in such cases it is usually covered with synthetic leather. The bionic iron hand is designed in this way: when a person wants to move a finger, the brain sends a corresponding impulse to the muscles. The sensors pick up these signals by contracting the surviving muscles. Each sensor is responsible for its own “field of activity,” so if it detects an impulse, a certain finger will contract. The possibilities for using this technology are wide, and even if the arm above the elbow was damaged, the normal functioning of the prosthesis occurs without problems.

Installation process

It may take 5-30 days to connect and set up the iron hand. The time depends on the size of the body part being replaced, the patient’s diseases and problems, as well as his age. Then you need to get used to the new limb and understand how it should be controlled. Typically this process lasts a week for young people; for pensioners it can take a month. But, alas, using an iron hand is not always possible. The fact is that if too much time has passed since the amputation of the limb, then the muscles will atrophy, and then controlling the device will be performed with significant difficulties or the signals will be too weak. Made of iron, it has those features that will still need to be studied anatomical structure your business to install and then adjust the placement of this device.

Possibilities

The more complex and expensive an iron hand is, the more similar it is to a human one. So, if we discard cosmetic devices and focus exclusively on bionics, then we can say that the simplest models can usually make only one grasping movement. More complex ones can perform dozens of movements, but the cost of creating such a technique will be much higher. Made of iron, it can perform several movements or only one. But even at home, you can create equipment that can satisfy the main range of applications.

Reduction in price

The cost of conventional prostheses ranges from 500,000 to 5,000,000 rubles, and given their dependence on the price of currency (since the vast majority of equipment is imported), this price can rise significantly. But there is a potential opportunity to reduce the cost - 3D printers. Most foreign samples printed in this way can boast a price of 100,000 - 150,000 rubles. The greatest success was achieved by the Ukrainian Victor Baklan, who was able to create a bioelectric prosthesis for holding things at a cost of only 1,500 hryvnia (4,500 in our money). This solution is a very effective answer to the question: “How to make a 3D iron hand with your own hands.” It also shows that this technology has significant promise here.

How to create a “cosmetic” iron hand?

Where to start? Let's say you want to make an object such as a hand iron man. To create it minimally necessary set- a file, a soldering iron and a desire to work. All this is necessary if it is to be created from metal. When working with other materials, the set will change. So, first you need to decide on the parameters of your own hand and make the initial structure. And then additional components will be put on it. The most important part here is the frame. You can follow certain drawings, developing an already developed concept, or start your own creativity. If there is no desire or opportunity to devote significant time to this, then an iron man’s hand made of paper is the simplest option. True, it is also the least durable.

How to create your own bionic hand?

This point is already more complex. It should be noted that if you do not have sufficient experience in creating such devices, then it is unlikely that you will be able to get creative here. Therefore, it will be necessary to completely follow the design specified in the topic. To implement the movement mechanism, you can use servomotors as the most suitable in terms of volume/power ratio. When working, you will always need to be careful and do everything carefully. An important step is to configure the sensors so that they receive signals for those fingers that should be (a book on the anatomy of the hand will help you with this). Of course, everything will not work out the first time, so you will have to further hone and bring the technique to mind, but the result will be very pleasing.

Conclusion

Based on the designs presented here, you can develop your own versions of iron hands. They can differ both in appearance and in capabilities and functionality. Of course, at first it will be difficult, but then you will be able to create various designs “for all occasions.” In addition, if a goal was set and the search began for how to make an iron hand, then part of the path has already been completed. You just need to not stop.

A story from Legacy Effects about creating costumes Iron Man.

The LE team was responsible for creating all of Tony Stark's suits, starting with the first Iron Man, and after completing the trilogy, they decided to blog about the difficult but exciting process creating one of the most popular superheroes of our time.

Each costume begins with a design that comes from Ryan Meinerding, Phil Sanders and the team at Marvel Visual Development. Once the design has been agreed upon throughout all stages of production, it is our turn to bring it to life and make sure the actors fit into the costume. Each model is built in a 3D modeling program, detail by detail. But how do we fit Robert Downey Jr. or Don Cheadle into a 3D model? It's easy - we scan the actors to create their own 3D model! This way we will get their exact proportions and be able to create a suit to their size. We can take a digital Downey and place it inside the suit to see where it will stick out of the mold and vice versa. Then it's just a matter of adding a few changes to create a cozy metallic suit. Mmm...comfort.

It's funny, but not all parts of the final costume are made of metal. In fact, they are made up of completely different materials, such as fiberglass, plastic and silicone. In addition to making the costumes as metal as possible, our goal is to make them as comfortable as possible for the actors inside. The costume shouldn't look awkward, and the actor inside shouldn't look awkward. He must provide complete freedom of action and comfort so as not to interfere with the actor’s performance. Then, each piece of the suit is 3D printed and sent to our workshop for casting.

Once we've decided what material we'll be making each piece from, it's time to paint and get them ready for filming. This is quite a tedious process considering the amount of materials involved. Various materials react differently to paint. This can cause a lot of trouble, because they all need to look like a single whole, and not like pieces put together. Luckily, our paint wizards know what to do with this, so we leave the suit in their capable hands.

We need to carry out fitting tests throughout the entire production process. Mannequins are great for visualization, but it is very important for us to know how the suit will react to movement. Unfortunately, actors cannot come to us at the first call, as they have more important things to do. Luckily for us, we have several volunteers on our team for costume fittings. Who wouldn't want to be Iron Man, even if just for a few minutes? These fittings are very important because they allow us to measure the comfort level and ease of movement of each suit. Additionally, we can see if the suit will experience a lot of wear and tear from parts rubbing against each other, and we can also detect if there are places in the suit where the actor's body will be visible.

Not only are we dressing Tony Stark, but we've also proudly provided several replicas of his previous Hall of Armor costumes. Since these costumes do not need to be worn, they can simply be hollow stage props. In addition, as sad as it is to say, these beauties had to contain explosives to create one of the largest action sequences, where Tony's entire armory was destroyed. Sometimes it's very sad to see our work fall into pieces, but deep down...it's pretty damn cool.

All children love to transform into fairy-tale characters. They play their first acting roles already in kindergarten. Of course, every girl’s dream is to become a wonderful princess, and every boy’s dream is to become a brave knight. But if to transform a baby it will be enough to buy a beautiful and long dress, then to “equip” a warrior for battle, you will need a special suit and accessories. The first and, perhaps, the main attribute of all knightly uniforms is the headdress. So, do you want to make your little boy an original carnival costume with a modern twist? Then check out one of the many ways to make an iron man helmet. The instructions are given in the form step by step guide with comments.

What and how to make an iron man helmet: preparation

Before you get started, you need to decide on a few things:

• for what purpose is it planned to make the headdress;
• what the future product will look like;
• what will be its technological and functional characteristics.

If you plan to make part of a costume, for example, for a New Year's party, you should not complicate the work too much. It also makes sense to simplify the functionality of the helmet and its manufacturing technology as much as possible. In the case of designing this main component of a superhero costume (photo 1) for participation, say, in an exhibition of works by high school students, a completely different approach is needed. It will be of particular importance here appearance, and its manufacturability. This instruction: "How to make an iron man helmet" is presented in the form of a description initial stages. Plan further work depending on the required result, using different raw materials and technology.

Necessary materials

To make a pattern, use fairly thick landscape paper or whatman paper. Draw the lines with a simple pencil. For cutting, you will need a stationery knife, regular scissors and small ones, such as manicure scissors (for neatly decorating corners and recesses). For a simplified version of the helmet, use corrugated cardboard (store box from products, cosmetics, etc.). Connect all parts with durable and quick-drying glue (Moment type) manually or using a special gun. For external decoration (coating parts and fastening them), you will need adhesive tape of various colors. The development of an iron man helmet can also be made of less dense material. This option is used if you plan to plaster the parts and then connect them to each other, for example, with magnets.

Assembling the template

Photo 2 shows drawings of an iron man helmet. When connected, the pattern pieces will be located on the following parts of the head:

1. Ear.
2. Parietal.
3. Rear.
4. Chinobuccal.
5. Nasal.
6. Frontal.

Knowing this condition, the parts cut out of paper will be easy to assemble into a single product. Photo 1 of the finished helmet will help to distinguish the parts, since almost all zones are painted differently and have clear connecting boundaries with each other. But still, before connecting the product into a single whole, place the parts on wide space and mark the gluing areas.

We make an iron man helmet from paper or cardboard

To make this headdress voluminous, you need to skillfully design the connecting joints. To do this, especially in places where curved lines are made, make small cuts, which will help give them a convex shape when gluing. Photo 3 clearly demonstrates this stage of work. After assembling all the parts together, cover with tape. different colors. You can also use colored paper for decoration, which then needs to be covered with transparent adhesive tape. Give your child the opportunity to use their imagination by creating a creative creation on a modern theme.

Application of complex technologies

Photo 4 shows how to make an iron man helmet from thick paper (whatman paper). If you cover the top of the assembled product with a thin layer of gypsum mixture and let it dry, you can get blanks for a more technologically advanced model. In this case, during the work process you need to think about how all the removable or sliding parts will be connected to each other. The simplest and most suitable option for this technology is the use of magnets fixed inside. You can also install rotating joints in the cheek and chin areas to make the front parts movable. Externally, such a modern helmet can turn out to be especially attractive due to the use of a special luminous emulsion when painting. Well, the final stage of the work will be to install mini-bulbs inside the craft in the frontal area to illuminate the eye recesses. That's all, the helmet is ready!

This original craft can serve as the basis for creating similar headdresses of other fairy-tale characters. Create by making your most unusual fantasies come true!

The appearance of the image of Iron Man on cinema screens generated a huge wave of popularity around the world and many fans of the beloved hero-inventor. Now every self-respecting fan of the science fiction genre strives to make his dream idea come true - to create his own image of Iron Man.

Instructions

And some have significantly succeeded in this, for example, the Norwegian John Beckensten (a famous sculptor in the film industry) spent more than a year creating the most successful copy of the costume of his favorite hero, using plastic and fiberglass.
Another noteworthy example was made by Anthony Lee (Colorado), who used polyurethane slabs for the costume and a special mixture of resin and sculpting clay for the helmet. Also, more than a thousand rivets, old auto parts, LEDs, servos, etc. were used to make the image more realistic.

And how many more of our home-grown craftsmen pore over their original inventions, using any available material and inexhaustible imagination!
If you decide to join the ranks of design fans, you will need fresh ideas, an original approach to the choice of material (foil, aluminum, tin, etc.) and inexhaustible inspiration.

First, we need a detailed development of all the components of the costume, taking into account the dynamics of movements.

You can start creating an image with a helmet, with a built-in interface (optional), a frame and connecting the electronics you have provided.

To make a helmet, use soft metal or tin. Be sure to trim the edges after cutting out the pieces. Don't forget to leave functional gaps.
Use the drawings!

It is preferable to fasten parts using staples and rivets; this is both faster and less dangerous.
The inside of the created helmet frame should be glued with soft fabric, and reflective lenses (or glasses from sunglasses) should be inserted into the eye slits.

The basis for the “body” can be any turtleneck jumpsuit made of thick dark fabric with lycra thread (this will avoid the formation of folds when moving).

Attach the “armor” to the fabric. For convenience, use a mannequin.

If you have the necessary skills, use hydraulic devices to organize the articulation and free movement of parts. In this case, the body frame must be cut out completely and include technological holes and fastenings for auxiliary elements.

Whether it will be a fancy dress or a high-tech invention depends entirely on the level of your technical training and inventive skill.

After the film Iron Man, which thundered throughout the world, a huge crowd of fans appeared. Iron Man has gained the most popularity. And not so much himself, but his wonderful suit. Since such an outfit costs a fantastic amount, fans had the idea of ​​making a costume at home.

Instructions

Making a helmet - draw a diagram of the helmet and, after cutting it out, glue the parts together. Cover the future mask and lower jaw with tape. To impart hardness, coat the entire surface with a small amount of epoxy glue. After drying, the inner side is glued with fiberglass.

Creation of the back - also made according to drawings with gluing of all parts. For the strongest adhesion, it is best to use clamps. The finished back is also glued with epoxy glue.

Making the chest shell - cut out small semicircular strips and a circle wide enough to insert the reactor. Then glue them to a piece of paper. It turns out to be a shell with a hole for the reactor in the middle. The manufacture of limbs follows the same pattern as the rest of the parts.

After covering all parts with epoxy glue and allowing them to dry completely, begin painting. For a more effective look on the costume, cover the parts acrylic paint, apply evenly, without any white spots.

Now move on to assembling the costume. Glue a wide and thick elastic band to all moving parts of the costume - the torso, the bends of the knees, and so on. It is recommended to attach a narrow elastic band to your fingers.

A snap hook is used to connect the parts. It is glued to all parts from the inside in the following areas: shoulders and forearms; chest shell and lower body; sides; lower limbs.

Since all parts must move without restricting movement, fasten them together with nuts. Make the lower limb so that your foot can easily fit into it in shoes.

Support the mask - to prevent the mask from falling, glue magnets and iron strips to the inside.

Lighting: Insert a flashlight or battery-powered night light into your chest. Hold flashlights in your hands, place the computer mouse buttons under your thumb and solder everything together.

Children are often attracted to very simple, unpretentious toys, while expensive and more “ornate” items go unnoticed. The whole point is that the child is drawn to objects that are made with love. Such a toy could be a railroad that you assembled. To make it you will need cardboard, glue and paints.

You will need

• - cardboard;
• - ruler;
• - pencil;
• — scissors/stationery knife;
• - glue;
• - paints.

Instructions

Decide how much area the entire building will occupy - railway tracks, stations, landscape elements. Based on this, determine the approximate length of the rails. Cut them out of cardboard. Furniture or appliance boxes are suitable for this. Draw strips of the required length on the cardboard. Their width also depends on the overall scale of the building. For example, for a train 10 cm high, you will need rails 2 cm wide. If a piece of cardboard is not large enough, assemble the rails from individual pieces. In addition to straight strips, cut several arched ones - iron the road You can make a loop or just make a few turns.

Paint the blanks with gray acrylic paint with metallic effect. Then cut the sleepers into strips 2.5 cm wide and 8 cm long. On the underside of each sleeper, make marks with a pencil 3-5 mm from each edge - it is at these points that the rails will need to be laid out. Since sleepers are often made of wood, the top side can be painted brown.

Lay out the pieces of rail in the desired sequence, then turn them over so that the bottom side is on top. Using a ruler and pencil, divide the blanks into equal sections. Place sleepers on these marks. Lay them out one at a time, pre-lubricating the intersection with the rails with glue.

While the railroad is drying, make a train. It can be depicted in a simplified way - in the form of parallelepipeds. For carriages, use unwanted cardboard boxes (for example, juice boxes) or glue them together yourself. The locomotive can be made from two boxes - a horizontally located “nose” part can be glued to the vertical cabin. Paint the entire train the same color. When it dries, glue the wheels to the cars and connect the composition together with cardboard strips. On each carriage you can draw windows, curtains and even the faces of passengers behind the glass.

Using the same scheme, make one or more stations. Apply a layer of paint to the base box, and then paint the surface using felt-tip pens. Space around railway you can fill it with cardboard silhouettes of trees and village houses, and put paper figures of people near the station.

Tip 4: How to film Iron Man in 2017

Iron Man is a science-fiction action film that was released worldwide in 2008. Its main character is the character of the same name from the comic book series created by Marvel.

Instructions

Development of the Iron Man film began in the 1990s with the participation of New Line Cinema, 20th Century Fox and Universal Studios, and in 2006 the filming rights were purchased by Marvel Studios, making the film the company's first completely independent project. Confirmed director Jon Favreau chose California as the filming location, making Iron Man stand out from other superhero films typically set in New York.

Many actors auditioned for the role of millionaire inventor Tony Stark, who later became Iron Man, including Tom Cruise and Nicolas Cage, but in the end it went to the charismatic Robert Downey Jr. Gwyneth Paltrow was cast in the role of Virginia Pepper Potts. The actress said that she would agree to filming only if it took place near her home. The creators of the film agreed to meet her and placed the site a 15-minute walk from the house. Robert Downey Jr. spent a long time preparing for his role, studying the image of the American inventor and billionaire Elon Musk, founder and owner of PayPal, Tesla Motors and SpaceX.

Iron Man comic book artist Adi Granov took part in creating the design of the Mark 3 suit. The costume was produced by Stan Winston Studios. The metal and rubber components of the armor were eventually supplemented with computer graphics.

Upon release, the film received many positive reviews from critics. Representatives of the American Film Institute included it in the ten best films of 2008. Iron Man was also nominated for an Oscar in the Best Visual Effects and Best Sound Editing categories, but lost the award to other contenders.

The Minecraft game is interesting because you can create whatever you want there, even humans are not an exception. There are several ways to create this mob, you just need to choose the right one.

A person in Minecraft is the first mob in the history of this game. However, starting from version 1.8, it will no longer be possible to create it, since the developers have simplified this function. However, the players did not lose anything, since this character did not play a special role, and it was impossible to transform him later, but meanwhile many people liked him.

Man in Classic Minecraft

In Classic Minecraft, a human mob could be created very simply by pressing the G key. However, now there is no such option. The person's mob in Minecraft was not very good good features, so he did not have the opportunity to perform actions to destroy or create blocks. He simply wandered around the game world without a specific goal.
The human mob was affected by liquids and other blocks, just like the player. Fans of Minecraft often believe that they will be able to control it and use it in some kind of action. But a person in Minecraft never had such functions, since in the game he acted precisely as a mob, and was no different from animals.

iron Man

IN latest versions The game has mobs for every taste, except for humans. But it can be returned to Minecraft, only it will be made of iron. To create it, you will need to find and download the people mod for Minecraft 1.3.2. Thanks to this expansion, the player will be able to feel like Iron Man. He was created by the developers based on the movie superhero, and has almost the same capabilities that Tony Stark had. The player can shoot, fly like a bird, and invent.
For Minecraft version 1.4.2, you can also install mods for people. As soon as the expansion is unpacked, representatives will appear in the game world human race. The behavior of these mobs is practically no different from the realities of life. In Minecraft, they must be governed by the same laws as an ordinary person.

Magic Villager Egg

If you don’t want to install mods, you can create a person in Minecraft using a magic villager egg. This is a very rare artifact that is not so easy to find. In most cases, it appears in treasuries and mob spawn areas. One egg allows you to add one person to the game. When there is no time to search for this artifact, you should find a village and build many houses in it, then the number of inhabitants there will automatically increase.

It’s always amazing when a person remains calm and cool in a difficult situation. He does not express emotions of worry, fear or sadness, but deals with the problem calmly. They say about such people that they have nerves of iron.

No excessive emotions

Some people are not naturally inclined to express emotions strongly. For example, phlegmatic people are somewhat slow in the speed of perceiving information; they like to remain calm and not show their feelings in public.
However, someone is made unperturbed by the environment of upbringing or communication. If emotional communication is not initially accepted in a family or company, and an open expression of feelings may be considered bad manners or a weakness of character, a person develops the habit of behaving accordingly.

Game approach

If you want to come across as a person with nerves of iron, learn to control your emotions and not show them in front of strangers. At the same time, it is necessary to learn not to dramatize the situation, and to distinguish well when it is worth pulling yourself together, and when there is no problem as such, in order to react emotionally.
It is worth learning not to take all events seriously, but sometimes strive to include a playful approach to the situation in your behavior, as if you were consciously participating in a play. Ability to engage in improvisation new role not only have creative people, but also among those who are considered to have nerves of iron.

Liberation from negativity

It is worth noting that nerves of iron are not necessarily inherent in people who are callous and cold-blooded by nature. Simply the ability to properly manage your emotions creates the impression of such a strong and unbending personality.
Since completely suppressing emotions is unhealthy, a balanced person understands that negative thoughts and feelings need to be released. He consciously strives to avoid tension and promptly frees himself from negativity. But he does not do this as a weak person, taking out his anger on others or panicking from anxiety.

A strong personality does not show emotions in public, but looks for an opportunity to relieve tension. At this time, he tries, for example, to meditate, hit a punching bag, or go into nature and shout in the forest. In this way, a person is able to stabilize his emotional background and continue to act productively in any situation.

Long practice

If a person is determined to win and achieve, and not to feel sorry for himself, then he is able to make his nerves of iron. In any case, for this you need to have a certain experience of impeccable behavior. Each new practice of calm behavior in stressful situations will temper your nerves and make them iron.

Do robot easiest of all cardboard boxes. If the components are bolted together, the limbs will move and the “iron man” will be able to stand, sit, bend his arms at the elbows and turn his head.

You will need

• - a package of juice, milk or kefir - one piece;
• - cigarette packs - eleven pieces;
• — small bolts and nuts for them — nine pieces;
• - colored cardboard;
• - scissors;
• - transparent adhesive tape;
• - awl;
• - paper glue.

The theme of superheroes is always popular with children. The boys take great pleasure in trying on the costumes of the most famous characters. Of course, many stores offer to purchase the appropriate outfit at various prices. Particularly popular is the comic book character and three wonderful films - Iron Man. It is his armor that almost every boy wants to try on. But on the shelves there are typical carnival costumes, but I want something realistic. Then the question arises for every parent: how to make an Iron Man suit?

Iron Man Suit: The Beginning

If you decide to make a beautiful costume of your favorite character for a child with your own hands, then first be patient. This work will require a lot of time and perseverance from you. Before making an iron man suit, it is necessary to study the real character in detail. View photos of the movie character and flip through the comics. This will allow you to get an overall picture of the future outfit. Of course, it will be impossible to create real Iron Man suits, but every parent can make an imitation.

After a detailed review of the necessary drawings, draw up a rough diagram of all the main parts of the costume. You can use the provided drawing. But before that, do not be lazy to measure all the main dimensions of your child: head circumference, height, arm length, waist and pelvis circumference.

DIY Iron Man: material for a suit

Making an Iron Man suit with your own hands is enough difficult task, but doable. After the introductory part with the character, you need to decide on the material from which the superhero outfit will be made. There may be several options:

Let's get started: Iron Man helmet

It's better to use Iron Man suit plans tailored to your son's size. Otherwise, the child will feel uncomfortable and quickly tear his outfit. Study the presented diagram in detail and increase it in proportion to the actual height and girth of body parts. The easiest way to make Iron Man is from thick paper (160 g/m2). It's better to start with the helmet. This way you will gain the necessary skills, and it will be easier to remake it.

We cut out each part separately with an indentation of about one centimeter from the edge. After we glue the parts together, it is better to do fittings at each stage. This is the only way you can perfectly adjust your product to the required dimensions of a person.

Hero Corps

The back and chest are done separately. Again it is necessary to make detailed drawing. Don't forget to measure your chest volume. All fans know that a specific lantern glows in the middle of the superhero’s chest. It can be imitated using a basic night light of the appropriate diameter. Just walk through the hardware store and you will definitely find the necessary decorative element. Or use foil, which will simply shimmer beautifully.

In fact, it all depends only on your creative ingenuity. There are no set rules for how to make an Iron Man suit.

Arms and legs

The arms and legs are the most mobile parts of any suit's body. It is necessary to make gaps or special transitions at the bend points. Keep in mind that children are very mobile and their movements should not be hampered. You can simply make shields and gloves.

For footwear, it is better to choose sneakers or sneakers. Apply red paint from a spray can. Next, take a brush and draw the corresponding lines. You can also make only shin guards for your calves.

The key point is rigidity

Now you know how to make an Iron Man suit. After this, the structure must be made more rigid. To do this, purchase epoxy glue. Using a wide brush, apply adhesive to all parts and wait for complete drying. It is better to leave the product for a day to air and dry completely, only after that we apply paint and other decorative elements.

Be prepared right away that the process will take several days. You want to create a high-quality costume for your child, and not just dress him up in a box from household appliances. Don't confuse the robot with Iron Man. If in doubt about the availability of any parts, consult your son. He knows everything about his favorite character.

If you still don’t have a good idea of ​​what Iron Man looks like, pictures of the costumes will help you finally figure it out.

You are not the first person who will try himself as a designer of a famous suit.

Many craftsmen were able to create very realistic outfits for themselves and their children. This means that you too can please your child. Just stock up on desire and patience. Your child’s satisfied smile will be an excellent reward for her titanic work and diligence.