Please advise which gas water heater is better to choose? This question is often asked by those who need to submit hot water, for example, in a country house or in a private house, or even in an apartment, but at the same time does not want to overpay too much. What aspects should you pay attention to when purchasing a geyser? How to choose this device and how does it generally work? Let's try to figure it out in detail.

You should refer to the reviews of experts, look at the rating best models for 2016-2017 and then it’s not difficult to choose best option device specifically for a specific budget and interior.

Experts believe that you need to choose a geyser based on several characteristics:

• Power;
• Brand;
• Ignition type;
• Presence of a chimney;
• Price.

Reviews from experts say that it is better to choose an automatic geyser from trusted manufacturers. Be sure to pay attention to the material used to decorate the geyser inside and outside, as well as the presence of a chimney. This factor will indicate whether the speaker can be placed inside the apartment.

To buy the ideal boiler for your home and budget, you should familiarize yourself with the following characteristics that will help you navigate your choice. The most important factor in the operation of a geyser is the power of the equipment. This is what determines the volume of water that the column can warm over a certain period of time.

Modern gas heating columns with a modulating burner are divided into types, and vary in power:

• Low-power (up to 20 kilowatts);
• Medium-power (from 21 to 24 kilowatts);
• High-power (25-30 kilowatts).

If you do not plan to heat a large amount of water, then one low-power column will be enough. Otherwise, pay attention to medium- and high-power units to draw water from several points at the same time.

Another important criterion when choosing a water heater is the type of ignition. Now there are few models left that require ignition with matches or a lighter. Such heaters are already outdated; it is necessary to pay attention to new and modern columns that have an automatic ignition system. It is produced using batteries or turbines; the wick is directly ignited when hot water is used. That is, for the system to start working, you only need to start using water, that is, open the tap. This type of speaker is safe during operation and is also much more convenient than older models.

There is also a type of ignition called piezo ignition. It is currently gaining popularity, but it can be noted that this is not the most convenient method. In this case, ignition is carried out by pressing a button, but it is not always possible to successfully install it so that the button is in a convenient place.

Also geyser This type of ignition consumes more gas.

The type of burner will help you choose the best option. For example, if the burner has a constant power, then it will require manual adjustment. This is not the most The best decision, because the pressure is uneven and changes frequently. It is much better if the device has modulating burner power, then the jet will independently adjust to the pressure, and the water temperature will always be optimal.

Safety is an important factor; now almost all high-quality water heaters have three-stage protection, as well as overheating fuses. There must be a lock if the flame goes out. You should also be aware of the presence of a chimney. If the dispenser is turbocharged, then everything that burns is thrown out into the street, but if there is a chimney, then all waste is removed through it.

Instructions: how to choose a gas water heater for an apartment

Currently there are a variety of flow columns. All types of Turkish production and Belarusian with automatic modulation, the Chinese manufacturer is very popular because of the prices.

The ratings of specialists and users will help you choose good household water heating appliance brands:

1. Vector JSD-20W is a Chinese water heater with electric ignition. In Russia, this high-quality water heating machine costs 8,000 rubles. There is a temperature sensor, this small compact water heater is ideal for small apartments with weak pressure.
2. Termaxi JSD 20-W - its functionality is much more modern, it has piezo ignition and a display good quality, copper pipe. The water temperature is also conveniently regulated. Price 6500 rub.
3. Zanussi GWH 10 Fonte - this column uses electronic ignition, a display, a copper heat exchanger, and a temperature controller. According to reviews, this is the best ratio of cost and quality, the price of such a unit is only 5,300 rubles.
4. Domestic, but not old Soviet manufacturers, for example, Neva or Iskra, also make high-quality heaters that use gas. Neva 4510-M costs 7,000 rubles, has two-stage flame modulation, and good safety control. It can be noted that this is a good heater at an affordable price.
5. Mora Vega 10 - completes the top of the best geysers. This is an expensive device, its price reaches 18,000 rubles, but its service life is long. During operation, not a single Chinese element is used, the assembly is exclusively European. This model has high strength, safety, maximum efficiency with a copper heat exchanger.

It can be noted that the top contains both already well-known brands of water heaters and newcomers. Don’t be afraid of Chinese manufacturers; now they are not inferior to the “old guys” on the market and make really high-quality equipment.

At the same time, they are quite cheap, and in terms of quality they are almost equal to European companies.

If we choose German, Italian models, as well as from a Russian manufacturer, then they all differ in quality and reliability. Each gas heater made in China or Turkish versions has different performance and sizes.

Selecting a geyser by design

When choosing, pay attention to the above factors, and the column will last a long time without interruption. But you need to choose a gas water heater for an apartment based on whether there is a chimney. After all, almost all geysers can be easily installed in an apartment. The chimney goes to the roof of the house, that is, all waste generated during the combustion process is removed through the pipe. It is not possible to install a chimney in apartments, so such speakers are not suitable for installation in modern houses. Popular turbine dispensers remove waste using fan pressure. The exhaust enters a pipe that is attached to the column and is discharged outside through a special hole in the wall.

Speakers with a turbine are more expensive and depend on electricity.

These are the types of geysers that can be installed in apartments. To ensure that choosing a gas water heater does not present any difficulties, you should first understand how this device works. So, a gas water heater (boiler) is a wall-mounted heater that performs the function of quickly heating water by burning gas. Currently, there is a huge range of different heaters with various functions. They are practically no different from Soviet models, except that the design has become more modern and the functionality is simpler and more convenient.

The design of the modern model is as follows:

• Pipes that supply gas and water;
• Burners;
• Heat exchanger.

When the tap opens hot water, the gas valve is activated. Gas enters the burner, this ensures the generation of heat and heating of water, as well as its supply through pipes. Air enters through a special hole. When the water flow stops, the gas supply stops.

Semi-automatic gas water heater and automatic machine

Currently, there are different geysers on the water heater market; they differ in their method of heating water. The automatic version runs on batteries; in fact, you just need to turn on the water and the heater will work on its own.

Nuances:

1. On the display of such models you can adjust the gas supply, as well as the water pressure.
2. If the model is semi-automatic, you need to light the wick every time, the automatic model does not require this, which makes operation much easier.
3. An automatic machine does not have a button for the gas to start heating up, but a semi-automatic machine does.

In principle, after lighting the wick in a semi-automatic machine, it is no different from an automatic machine. Therefore, you should not be afraid of semi-automatic models; they cost a little less, and in operation they are practically no different from automatic ones.

Modern geysers: advantages

Gas water heaters have been popular for several years, back in Soviet time Many people used them to provide hot water to their homes. They have various advantages as easy to operate.

Old-style devices are quite difficult to operate, because:

• You need to light the fuse every time;
• Adjust the temperature;
• Regulating the pressure, in general, is a long and complex process.

Modern models are much more convenient; automatic heaters work immediately after opening the water tap. Heating water using a gas water heater is much more profitable in terms of budget. Gas is consumed only when hot water is required, while the boiler consumes extra energy to keep the water hot.

A geyser works much faster and can provide hot water to not one, but many points. It is also small in size, which allows it to be placed in any room.

At correct operation, the geyser will last at least 10 years. On average, models are in use for 15-17 years.

Modern speakers are equipped with reliable overheating control systems. Based on the above factors, the geyser is optimal solution for those who need a large amount of hot water.

How to choose a gas water heater for a private home: review

Choosing a geyser for a private home is quite simple, because you can purchase both models with a chimney and those without. So, you need to choose the right gas water heater for your home based on certain factors.

Namely:

1. Is there sufficient protection against overheating or gas supply without flame? In a private home, you need to pay special attention to the safety factor.
2. Protection against overheating of the model; there must be a fuse that will turn off the column if the heat exchanger approaches the boiling point.
3. Please note that there is a chimney that will help dispose of waste from heating water. In a private home, you can purchase models that include a chimney on the roof.
4. Be sure to look at the power of the device, as well as the material from which the heat exchanger is made.

It is imperative to look at the water heater’s passport to assess the safety of the device and its power.

Types of geysers (video)

In conclusion, it can be noted that a geyser is the best option for a water heater for those who have a small room but need hot water. Modern boilers are very simple and easy to use, but at the same time they are more reliable than old boilers and can last for several decades. The cost of water heaters is affordable, given their long service life, and due to their compact size, even the smallest room can install this unit. The insulation makes these models silent, their design, and the display on some models, makes the speakers perfect for any bathroom or kitchen interior.

Lack of hot water supply is not a problem - everything is solved by installation good water heater. Gas options have proven themselves to be excellent. However, it is very easy to get confused in the modern assortment, so even before going to the store, you need to figure out in advance which geyser is better and find out expert reviews about specific products.

There are many manufacturers of such units - among them there are many worthy and reliable options. It is important to focus on the following indicators:

• power of equipment;
• ignition type;
• type of burner;
• safety.

The power characteristic affects its overall performance. In fact, it determines the amount of water that the device can handle in a certain period of time. The power can be low (from 17 to 19 kW), medium (22-24 kW), high (from 28 to 31 kW). When choosing power, you need to focus on the expected number of water intake points in your home. If there are several of them (and their simultaneous operation is assumed), then it is better to choose a unit with medium and high power.

The type of ignition is also relevant. Previously, a lighter and matches were used for this. Modern models assume semi-automatic or completely improved automatic system. In machines, the spark is provided by turbines or a battery, and to start, you just need to open the hot water tap. There is also piezo ignition (semi-automatic option), which involves pressing the button intended for this. The bad thing here is that this method increases fuel consumption (the wick will burn even after ignition is completed).

It is worth paying attention to the type of burner. You should not take one that has a constant power - you will have to regulate it, adjusting it to the water pressure in the system. The best idea of ​​the developers is if the power is modulating. Such an element is capable of independently adjusting to the flow, and then the temperature will be relevant.

Finally, when it comes to operational reliability, you should pay attention to safety. Modern models of geysers are equipped with three levels of protection, which manifests itself in various incidents - accidental cessation of flame, sudden appearance of reverse draft. There are also special hydraulic valves to help avoid overheating.

It is also important how the combustion products will be removed - this can be done using the turbocharged method and using a chimney. In the first case, everything will go straight into the street, and in the second, into the chimney system.

Analysis of popular geysers

Experts in the field of such equipment have already compiled a rating of geysers. The opinion of experts formed the basis of the review, which presents the top 5 best brands specializing in their production.

1 place for Bosch WR 10-2P

The undoubted leader of the review is the Bosch WR 10-2P model. It attracted ordinary users with its stylish design and compact size. The unit will fit harmoniously even into a small room. Experts unanimously recognize it mostreliable: Automatic ignition system is used. The device itself is activated when a hot water tap is opened. The heating temperature limitation has also been thought out. Ignition is carried out using a piezo - no batteries are needed.

Column Bosch WR 10-2P

With this technique, you don’t have to worry about the pressure - it will work even if the pressure is not stable. By the way, you can regulate the flame and temperature of the liquid using special regulators.

However, such “perfection” also has minor drawbacks.

1. The productivity of the model is approximately 10 liters per minute. This is considered not the best indicator.
2. The quality of the water affects its performance.
3. To clean the device, it must be completely disassembled.
4. Service is expensive, and not every city has an authorized Bosch representative. In addition, you will immediately have to prepare for high cost of original spare parts.

2nd place for Ariston Fast Evo 11C

Ariston Fast Evo 11C is on par with its competitor from Bosch: it is also capable of operating even at a nominal water pressure of 0.1 bar. There is also a well-thought-out safety system: flame control, a thermostat that protects against overheating, and a draft sensor. Can be set maximum temperature(limit 65°C).

One of the main advantages is work from the network, which is better than the option with batteries that can run out at any time. A heating power of 19 kW will provide a productivity of 11 liters per minute of working time.

Column Ariston Fast Evo 11C

There is also a minus that did not allow this device to take a leading place in the top - the temperature on its digital display is displayed incorrectly.

The best inexpensive offer in 3rd place from Neva Lux 5514

This, without a doubt, can be called the Neva Lux 5514 option - this option can easily compete in build quality with expensive foreign offers. Of course, the functionality here is not as chic as that of popular brands, but overall the model is impressive:

• auto-ignition;
• intuitive controls;
• independence from water pressure (can be adjusted using hydraulic adjustment);
• the body does not heat up during operation;
• can work with two water intake points(there will be no temperature changes);
• there is gas control;
• The combustion chamber is cooled by a water system.

Users are delighted with another point - the initial settings last for several years. Everything will work efficiently and will not go wrong.

Column Neva Lux 5514

The following disadvantages prevent you from rising to the top:

• noticeable noise during operation;
• replacing batteries;
• expensive in case of heat exchanger.

Advantages and disadvantages of Mora Vega 10 in 4th place

The Czech manufacturer from Mora Top Vega 10 has a capacity of less than 10 liters, but it won fourth place in the top best geysers thanks to another number of advantages:

• European build quality (manufacturers promise that the design does not contain a single part from the Middle Kingdom);
• copper heat exchanger (increases efficiency to 92.5%);
• scale-free technology in pipes;
• a full range of safety systems (does not start without turning on the water, protection against overheating, against the appearance of reverse draft, the presence of fuses for the operation of the burners).

Column Mora Vega 10

Unlike competitors, Mora Top has a more noticeable weight - at least 2.5 kg. However, there is also a drawback: when weak pressure water, the device may simply not turn on (the manufacturer has specified a calculation of at least 0.2 bar).

5th place for Zanussi GWH 10 Fonte

The excellent Zanussi GWH 10 Fonte geyser will quickly and efficiently heat water in a cottage or apartment. The unit will look good in any interior, it makes little noise and uses resources economically. Productivity can be adjusted from 5 to 10 l/minute. The equipment will work even with low water pressure (literally from 0.15 bar). The disadvantage of the device is that it will require periodic replacement of batteries.

Speaker Zanussi GWH 10 Fonte

All presented samples are the best geysers, despite the allocated places. The choice will be determined by the objective and subjective indicators that the buyer expects from his purchase.

Others not included in the list, but no less worthy representatives include Vaillant, Electrolux, Termaxi, Beretta, Vector.

Having decided which geyser is better, the buyer purchases new equipment. It doesn’t matter which model was chosen from the proposed top - in order for it to work better, you need to listen to useful advice.

1. Installation and connection should be trusted qualified specialists, because the settings directly affect the quality of its work.
2. The output temperature should not exceed 60 degrees (for some models 40 will be enough). This is necessary to prevent the formation of scale that will collect on the membrane.
3. If it is known in advance about hard water, then it is better to equip the unit in advance with a system that will prevent salt deposition.
4. During operation of the device, it is prohibited to adjust the temperature by opening the cold water tap. This will cause steam and excess pressure to build up in the system due to excess hot water. This is also bad because water may begin to leak from the heat exchanger.
5. It is important to regularly clean the igniter and heat exchanger. Here it is necessary to clear blockages that appear from combustion products.
6. It is also important to monitor the water pressure - if it is insufficient, you will have to additionally install a special pump.

Such prevention will help the device to perform its “duties” well, and users – all year round enjoy hot water.

If you purchase a really high-quality water heater, you will always have hot water in the house, and this is also a fairly economical solution that can supply liquid to several water intake points at once. So let's find out what to look for when going to the store, and which manufacturers should be trusted.

Geyser or electric water heater - which is better to choose?

Each type of equipment has its own advantages, for geysers these are:

1. Beautiful design.
2. Simple and convenient operation.
3. Long service life.
4. Safety of use.

If you compare it with electric boilers, then it is worth mentioning here small sizes geysers and their good performance. Modern technologies allow manufacturers to make high-quality and effective products that are safe to use, even despite their explosive fuel.

Without productive technology, human life is practically impossible, because we are all accustomed to comfortable conditions and the use of all the blessings of life. That's why the residents multi-storey buildings More and more people are refusing the services of public utilities and purchasing a gas water heater. The issue of saving is also important, because such a water heater will be cheaper than heating water from central systems or using electrical devices.

Equipment selection criteria

And yet, which boiler to buy? To make the right choice, you need to familiarize yourself with the main characteristics that will help you purchase the best option.

First of all, you need to pay attention to the power of the device. The overall performance of the equipment largely depends on this characteristic, because it determines the amount of water that the column can heat in a certain time.

According to this criterion, geysers are divided into three types:

• Low power (17-19 kilowatts);
• Average performance (22-24 kilowatts);
• With high power (28-31 kilowatts).

You need to choose a specific column depending on your needs and the number of water intake points in the apartment. If you need the ability to draw water from several points at the same time, then it is better to choose an option with medium or high power.

The second criterion for selection will be the type of ignition used. Once upon a time, ordinary matches or a lighter were used to ignite the column. If you meet such a “dinosaur” today, it is better to bypass it and make a choice in favor modern models. Now the column is working automatic system ignition, the spark appears thanks to turbines or batteries, and the wick is ignited only when hot water is used. As a result, to start the system you just need to open the tap, and this is not only convenient, but also safer.

There is another one Alternative option– piezo ignition, it is quite popular, but not entirely convenient. The fact is that ignition begins when you press a special button, and if the equipment is installed in a hard-to-reach place, then it is difficult to press the button. Also, in this method, the wick will burn even after ignition, thereby increasing gas consumption.

When choosing a gas water heater, you cannot ignore the type of burner. Thus, a burner with constant power requires manual adjustment. It is clear that such a solution is not entirely convenient, because the water pressure is central system changes often. It is better to buy a burner device with modulating power; it will independently adjust to the power of the jet and provide normal temperature liquids.

Safety remains an important factor. High-quality equipment is equipped with a three-level protection system and an automatic locking function when the flame goes out or when reverse draft occurs. Also, safe speakers are equipped with safety hydraulic valves which help avoid overheating.

Another important factor will be the removal of combustion elements. Here the speakers are divided into two types: turbocharged and chimney. In the first version, the device throws combustion elements into the street, and in the second, into the chimney system.

In addition, important criteria are the reputation of the manufacturing company, and, of course, the cost of the equipment, because no one wants to overpay. Therefore, it is important to buy affordable and high-quality equipment.

Rating of the best geysers in terms of reliability and quality

HEBA 4511

This device is called the best among inexpensive models. It is clear that its functionality is not so wide, but it has everything you need to heat water and ensure safety. Experts advise purchasing additional pump equipment(at low pressure), use rechargeable batteries, take into account all recommendations for use and regularly call technicians for maintenance, then all the disadvantages of the column can be minimized.

This speaker is inexpensive and is distinguished by its reliability and the absence of unnecessary bells and whistles. It is perfect for a house where 1-2 people live, and is mainly used at one water intake point. For country houses this is an ideal option.

But if you have small children, then you should not buy HEBA 4511, because it is very difficult to set a stable temperature, the heating process depends on the inlet temperature, and the throughput is small.

Ariston Fast EVO 11B

An important advantage of this model is its appearance; it differs from traditional white water heater boxes. And if not only reliability, but also design is important to you, then this model will be the best option. The controls are quite simple; there is a special handle for this.

In addition, the device maintains heat well and is equipped with a fuel leakage protection system. Owners of such speakers rarely experience breakdowns.

In reviews, users note that Fast Evo 11b is suitable not only for apartments, but also for private houses. Additional safety systems ensure reliable operation of the equipment.

Positive aspects of the gas water heater:

• Does not make noise during operation;
• Clear control system;
• High-quality assembly;
• Small dimensions;
• Rapid heating of liquid;
• Heating limitation function;
• The model weighs little, so there will be no problems with transportation and installation;
• Gas control system;
• Provides hot water to two water intake points at once;
• The device is equipped with a battery charge indicator.

Flaws:

• During the heating process, changes are possible;
• The battery needs to be replaced periodically.

Bosch WR 10-2P

Experts often call this column the most reliable. Indeed, owners have very few complaints about this model. Stylish design, compact size, good combination with any interior style and other characteristics are described only in a positive way.

Problems with the device may occur when a serious breakdown occurs and there is no certified person nearby. service center. By the way, one of the main disadvantages of Bosch equipment is the high cost of spare parts, so repairing the speaker will hit your pocket. And if you bought this model, then you should be very careful when using it, and then there will be no problems with breakdowns.

If you need simple and reliable equipment from a manufacturer with a good reputation, then you can buy this model. Installing water heating equipment will not bring any problems; a specialist can handle it very quickly. Additionally, you can install a filter to purify the liquid.

Column advantages:

• Quiet operation;
• Compact dimensions;
• Ability to turn on even with low pressure;
• Availability of flame intensity regulator and liquid temperature regulator;
• An automatic ignition system is used, the device turns on when the water is opened and turns off when the tap is closed;
• The presence of piezo ignition, for which you do not need to buy batteries;
• Heating temperature limitation function;
• Automatic security mechanism.

The model also has some disadvantages:

• Low productivity (about 10 liters per minute);
• The device is sensitive to water quality;
• To clean, you need to disassemble the device;
• There may be difficulties with servicing (therefore, it is necessary to inquire in advance about the nearest service center).

Neva Lux 5514

One of the best geysers for an apartment if price-quality ratio is important. Experts will no doubt recommend it to you, because in terms of build quality it is in no way inferior to more popular imported products, but costs much less.

Users note that after the initial setup temperature conditions, you don’t have to touch the equipment for several years, everything works efficiently and doesn’t break down. Heating the water takes only a few seconds. It is also worth noting that the geyser of this model is not afraid of variable water pressure in the system.

The high quality of the equipment completely satisfies the buyers. And a significant advantage over famous analogues is its affordable price. Even when water is turned on at several water intake points, its temperature remains stable.

Column advantages:

• Compact dimensions;
• Clear control, which is carried out thanks to one handle;
• Heating of the liquid does not depend on pressure (the device has a hydraulic flame adjustment that takes into account the pressure);
• The model is equipped with automatic ignition;
• Fast water heating;
• High power (produces up to 14 liters of water per minute);
• During operation, the speaker body does not heat up, which eliminates the risk of burns;
• When turned on, there is no supply of boiling water;
• Provides 2 water intake points simultaneously without problems with temperature changes;
• Temperature limit function;
• Availability of gas control;
• Water system combustion chamber cooling;
• Reliable protection.

Disadvantages of the model:

• It is a little noisy during operation;
• You have to change batteries from time to time;
• The weak point is the heat exchangers, the replacement of which is expensive.

Vaillant Mag Oe 11-0/0 XZ C+

Of course, the rating could not do without the products of this eminent German company. This equipment model is equipped with a multi-stage protection system, which makes it completely safe. Availability protective coating eliminates the appearance of rust on the body and extends the life of the device. If the water pressure is low, experts advise purchasing an additional pump.

This model of geyser is characterized by its small size, simple controls, and the presence of special modes for winter and summer. Provides hot water to two taps at once without any problems. The procedure for cleaning the mesh is quite simple, you can do it yourself.

To increase the service life of the geyser, experts advise replacing all pipes and installing a water filter; this will prevent the device from frequently clogging with debris from old pipes. However, this advice is relevant not only for this model, but also for all water heating equipment.

Advantages:

• Compact dimensions;
• Easy adjustment and control of the column;
• Operational water heating;
• A burner with automatic modulation is installed;
• The dispenser is equipped with a gas pressure regulator and a gas control system;
• There is automatic ignition;
• There are special operating modes for summer and winter;
• All equipment components are accessible from the front panel;
• The copper heat exchanger is equipped with a protective coating.

Negative sides:

• Fairly high cost;
• Sensitivity to water pressure; if the pressure is low, you will have to buy a pump;
• It is noisy when running at high power.

Electrolux GWH 350 RN

This model is called the most economical geyser; in addition, it very quickly copes with the task of heating water. Even pressure changes will not harm the maintenance of liquid temperature. And for this it is not necessary to turn on the device at maximum power, because there is a special, economical mode. The geyser has a self-diagnosis function; the equipment itself will detect malfunctions. This model is perfect for those who value reliability and safety.

Advantages:

• Good heating power;
• Easy to operate;
• Provides hot water to two points at once;
• Availability of two operating modes (full and economy);
• Piezo ignition system that does not require batteries;
• A high-quality copper heat exchanger is installed;
• High throughput;
• Gas control system;
• Self-diagnosis function;
• Fire intensity control;
• Summer and winter mode;
• Convenient maintenance; for cleaning, you do not need to completely disassemble the device.

Flaws:

• High price;
• Large sizes (height is 72 centimeters);
• High sensitivity to traction, the device may stop if dropped atmospheric pressure;
• Sometimes there are difficulties finding parts.

It is difficult to manage without hot water in an apartment or house. If central hot water supply is not provided, then the issue can be resolved by installing an electric or gas type. Electrical devices not very economical and last much less, geysers are much more widespread, they are more economical and more efficient to use. When choosing this equipment, pay attention to a number of important factors:

• Product power: the ability of the column to produce the required volume of hot water - there are 10-11, 13-14 and 16-17 liters per minute;
• Possibility of adjusting water flow and temperature;
• Manufacturer - the better the quality of the device, the longer it will work and the faster it will heat the water.

In our top 10 rating dedicated to the choice of geysers, we looked at the most popular models that have a good price-quality ratio. It includes products that have received only positive reviews from consumers.

This water heater is quite large in size. You can use two water points at the same time - this will not affect the efficiency and temperature of hot water at all. Ignition is carried out using a piezoelectric element, which ensures easy switching on of the device. There is an operation indicator and a gas sensor inside. If it is triggered, the column automatically turns off.

The burner is made from high quality of stainless steel. The heat exchanger is made of copper and has a long service life - about 15 years. The device does not overheat during operation. Connecting the Bosch WR 10-2P to the water supply system is quite easy, and it doesn’t weigh too much - it can be easily hung on the wall. The water heater is connected to the gas supply exclusively by a specialist from the gas company. For its price category, this is one of the best water heaters.

Advantages:

• Works reliably and stably;
• With timely maintenance there are no complaints;
• Long service life;
• Acceptable price.

Flaws:

• The piezoelectric element does not always work;
• A significant number of control sensors that are usually not needed or quickly fail during operation.

This automatic device, the heater is able to turn on and off independently. The productivity is about 14 liters per minute, making it one of the optimal systems for centralized water supply, which produces about 9-11 liters per minute. The temperature is adjusted only once - in the future the water heater will maintain it independently.

Operating the device is very simple - there is only one handle on the body, which is responsible for adjusting the temperature. This heater does not have a display, so you need to adjust the water according to your feelings. To the left of the rotary handle there is a special indicator light. If it lights up, it means that there is a need to replace the batteries located in the piezoelectric element. When it flashes one to five times in a row, you need to call a technician. The heater has a bottom water supply, which makes connecting the device easier. Near the water inlet, the device has another knob that adjusts the volume of water entering the heater. In essence, this is a standard faucet regulator.

Advantages:

• Attractive appearance;
• High build quality;
• Ease of use.

Flaws:

• The copper radiator is quite thin - some models leak quickly;
• The batteries in the piezo ignition discharge quite quickly;
• It becomes clogged with scale if the water is hard.

This is the only heater in this rating that has a manual ignition system. Its design includes a handle that allows you to adjust the size of the flame; to the right of it there is another handle, which is responsible for the supplied volume of water. Below them there is a digital display that displays the temperature of the hot water. It turns on when the tap is opened.

A filter is installed at the water inlet rough cleaning, trapping debris, which extends the life of the heater. The model is lightweight, making it easy to hang on the wall. It is prohibited to connect to the gas line yourself. The heater operates almost silently.

Advantages:

• The copper radiator is coated with tin, which extends its service life;
• High power level - about 19 kW;
• Weight only 5 kg;
• Availability of automatic overheating protection;
• Display showing water temperature and possible mistakes.

Flaws:

• The automatic shutdown system is activated when the water pressure is low;
• After some time of operation, it begins to make popping noises;
• The need to turn on manually;
• The temperature has to be adjusted all the time.

This is a fairly compact design with a flat body of small dimensions. The heat exchanger is made of copper, ignition is automatic. It is a modernized model 4510. Productivity remains the same - 10 liters per minute. Modulation of the burner flame depending on the water pressure was added here. There is no need to constantly monitor and regulate the temperature.

On the front side of the case there are two control knobs: one is responsible for the passage of incoming water, the second is intended for setting the temperature. Between them there is a digital display that allows for more precise adjustments. In addition, the design includes a significant number of sensors to ensure reliable operation and safety of use. They are responsible for the size of the flame, water temperature, draft, there is a gas control system that prevents leaks.

Advantages:

• Simplicity of design;
• Maintainability;
• Low price of spare parts;
• Reasonable cost;
• Small dimensions;
• Ease of use.

Flaws:

• Components periodically fail;
• Short service life of the heat exchanger.

Maximum thermal power of this device is 17.3 kW, the effective throughput is 10 liters per minute. This is one of the best geysers; it is additionally equipped with an electric ignition system and is well suited for domestic water supply systems. The design is small in size and has high performance. The column has a long service life and can be repaired if necessary. It contains a backdraft valve that prevents combustion products from entering the room - this makes the dispenser absolutely safe during operation.

An ionization electrode is also provided, which shuts off the gas supply if the flame suddenly goes out. The column can fully supply three points of analysis with water at once. Another advantage is the ability to work with natural or liquefied gas.

Advantages:

• There is an electric ignition system;
• Open combustion chamber;
• The column is wall-mounted, gas and water are supplied from below;
• Available whole line functions responsible for safe operation;
• The design has two knobs - one is responsible for the maximum heating temperature of the water, the second regulates the size of the burner flame.

Flaws:

• IN summer months on the pipe with cold water condensation forms;
• If the column is idle for about 7 hours, then the heat exchanger gets very hot from the wick - because of this, boiling water comes out for a few seconds after turning on the water;
• Cracks appear on plastic parts during operation, which leads to the need to replace them.

These are fairly high-quality products, perfectly suited for Russian conditions. The device weighs only 8.5 kg, so it can be easily hung on the wall. The burner ignites automatically when the water is turned on. All controls are smooth, with their help you can quickly adjust the required heating parameters and overall performance of the device. On the front side there is a liquid crystal display. It displays the water temperature, the operating mode of the device, and also displays all error messages.

This column is recognized by users as one of the best among gas columns, largely due to its modern system 4D-guard protection. It includes several sensors: lack of draft (if it disappears, the gas is automatically shut off, the same sensor does not allow the effect of reverse draft), a hydraulic sensor (it is responsible for the volume of water passed through), an ionization rod (also stops the gas supply if the flame dies out ), temperature sensor (turns off the column if it overheats).

Advantages:

• High quality;
• Good level of security;
• Acceptable price.

Flaws:

• The case overheats during operation;
• It is a little noisy during operation;
• Periodically you will have to change the batteries in the automatic ignition system.

It is reliable and comes with everything you need to mount it to the wall. It is equipped with an automatic ignition system and a hydrodynamic generator, which ensures stable operation of the device. On the front side there is a multifunctional indicator board that allows you to control the level of water heating and possible errors in the operation of the equipment. The power of the design is controlled, which reduces gas consumption; the automatic ignition system does not include batteries.

The heat exchanger is made of alloys without the addition of lead or tin. All plumbing fittings Made from polyamide, which is additionally reinforced with fiberglass. There is a sensor that protects against reverse draft; there is an output temperature limiter, which increases the safety of the device. The column has a valve, through which you can change the volume of supplied water.

Advantages:

• Compact device;
• Reliable assembly;
• Stable operation over a long period of time;
• The temperature can be adjusted to the nearest degree;
• The water is heated smoothly, without jumps;
• The burner goes out when the hot water tap is turned off.

Flaws:

• The hydro generator makes a loud whistling sound;
• Reacts sharply to pressure changes in the water supply;
• There is no protective cover at the bottom.

This is one of the best geysers for an apartment, it has an attractive appearance and has good performance characteristics. It can be used in houses where people live seasonally, as it has a frost protection system. The design has a fan, so the column does not need to be connected to a traditional chimney - you just need to take the pipe outside.

The case is made of stainless steel and has very compact overall dimensions. The model consumes little gas, but reliably heats the water to the set temperature. The front panel has a liquid crystal display and several buttons that allow you to fine-tune the equipment. A system of protection against high water pressure and reverse draft is provided, which ensures long-lasting and safe work devices. The column has protection against overheating.

Advantages:

• Information screen;
• A significant number of functions;
• Possibility of fine tuning;
• Economy mode;
• Excellent build quality;
• Reliable components;
• Designer appearance.

Flaws:

• High price;
• More designed for a private house than for an apartment.

Easily supplies several water points at once. When connected, the column is connected to a cold water supply, ventilation system and gas line. The model has a piezoelectric igniter that does not require special maintenance. The model is equipped with a backdraft protection sensor, which extinguishes the flame and shuts off the gas when combustion products begin to flow into the room.

The power level can be adjusted, which allows you to significantly save gas consumption. The column is compatible with any type of faucets, including those equipped with thermostats, one lever, and so on. The device has two rotary levers and a display that allows fine-tuning of the equipment.

Advantages:

• Has winter and summer modes work, which has a positive effect on efficiency;
• A cleanable coarse filter is installed at the inlet;
• Reliable automation;
• Heats water almost instantly;
• In the first moments of operation, warm water comes out of the tap, and not boiling water, as in most similar models;
• Easy to set up;
• An economy mode is provided.

Flaws:

• If the settings are set to maximum, the speaker makes a lot of noise;
• The piezoelectric shield is also quite noisy.

Leader in the reliability and quality rating among geysers. It easily supplies up to 5 water points. Maximum power device is 20 kW. The column quickly heats the required volume of water to the required temperature. The gas is ignited using an electric ignition.

The radiator is made of copper, makes virtually no noise during operation, and has an attractive appearance. Absolutely safe design due to the provided “gas control” function - it does not allow the slightest gas leak. There is a filter at the inlet that filters out large water contaminants. All settings are displayed on a special display - the set water temperature is displayed and there is an on indicator.

Advantages:

• Quiet operation;
• Possibility of smooth settings;
• Small dimensions;
• Quick ignition.
5.00 out of 5)

9445 02/13/2019 8 min.

To select the optimal model of a geyser, you need to focus on the main criteria of its quality, the availability of functions and the adaptation of its design to specific conditions of use. If you determine all the main quality criteria in advance, you can choose the most appropriate, durable and high-quality speaker, even from inexpensive models, in order to be satisfied with your purchase in the future.

Geyser in the kitchen

A gas water heater will make it possible to provide your home with uninterrupted warm water.

A gas water heater is required to supply warm water in real time. Other devices require a certain wait before the warm liquid supply is available.

At correct use gas burner You can comfortably consume water in any quantity by independently adjusting its required temperature. It is possible to easily wash dishes or hands without interrupting to check the readiness of warm water or adjust the correct pressure; it also eliminates the need to use cold water when there is no hot supply, which helps make the processes of cooking and washing dishes quick and hassle-free.

Features of work

The geyser consists of three main parts:

1. Heat exchanger.
2. Main burner.
3. Pilot burner.

A special valve responsible for igniting the burner is activated immediately after the water tap opens. The valve allows gas to pass into the pilot burner, from where it enters the main burner. When the gas ignites the wick, continuous heating of the allocated amount of water begins. To do this, the generated heat passes through a heat exchanger, that is, it is conducted along a kind of spiral, entering the liquid.

When the water is heated, it is sent through an exhaust pipe that leads it to the main tap.

The correctness of this action is ensured during installation of the device. Gas combustion always produces products that require disposal. They go up the chimney, which should lead out to the street.

Advantages and disadvantages

Positive traits:

• Economical in terms of resource consumption for which utility bills are charged.
• Easy operation, some models are fully automated.
• Small dimensions devices and beautiful appearance with the ability to adapt to any, even the most ergonomic design.
• Durable and comfortable use without crashing.
• Safety during operation.

There are advantages inherent only to some models of geysers, which can be counted among their features:

• Simplicity in design, presence of aesthetic lines, own style, restraint.
• Pretentious lines and bright design , which allows you to make the device one of the main accents in the kitchen. This feature is often appropriate.
• Possibility of purchasing in various color ranges or even with decorations.
• Some models can be hidden in a false wall or completely block it with a closet. Small sizes and standard contours are often appreciated.

There are not many disadvantages to a gas water heater - the main thing is to follow the safety rules.

Minuses:

1. Need for supply ventilation . In order for combustion to take place correctly and without interruptions, you need to constantly perform manual ventilation or use special devices that purify the air and then supply it from the street to the room; it is also possible to organize forced air exchange, where there are simultaneous devices for attracting and extracting air.
2. Dependence of the reliability of the geyser on the manufacturer the materials they use.
3. Difficulties in finding high-quality and durable models in the low price segment.

How to choose what to pay attention to

The ignition option determines the practicality of the device and comfort during operation:

• Manual ignition. At the moment, manufacturers do not produce such models. This is not comfortable and takes a lot of time, but old-style products have this way of turning on the device.
• Piezo ignition. This method involves activating the device by pressing a special button. Usually, together with this element, there is a special handle on which there is an element that allows you to independently determine the gas supply power.
• Electronic ignition. This method of bringing the column into working condition is considered more economical. The turbine comes into operation under the influence of water pressure, so to automatically start the column, just open the tap.

The service life of the device is important. In most cases, untreated water flows from taps. There is a certain set of components that constantly fail due to damage from low-quality liquid.

All about the advantages and disadvantages of geysers:

Models made in China are subject to such unpleasant features more often than products from trusted companies. If the tubes are made with a small diameter and their walls are too thin, it is imperative to analyze the quality of the water in own home and, if necessary, discard this type of device. When the negative qualities of water are clearly expressed, you have to choose products that constituent elements which are made of copper.

Once the main models have been selected, it is possible to quickly determine which of them is most optimal in a particular case.

Enough compare such indicators:

1. Maximum water pressure, which the device can withstand without the risk of failure or gradual deterioration of the component elements.
2. Minimum permissible gas pressure in the general system.
3. Pipe diameter. It is necessary to separately evaluate these indicators both for the connector at the outlet and at the inlet to the water heater.

Power for an apartment, for a house

When choosing a gas water heater, decide on the necessary parameters

If a geyser model is affordable, you can determine in advance that it has constant power. In order to use the optimal water temperature when using this device, you must constantly adjust the temperature manually.

Expensive geysers feature automatic water temperature correction. The liquid changes temperature when the power of the water flow changes. With constant use, it can be said that using such a gas water heater is much more convenient than one that operates in semi-automatic mode.

Recently there have been modulation geysers. The water temperature will be constantly maintained, since the system evaluates not only the power of its flow, but also how warm it was when entering the water heater.

Household geysers are characterized by a power of 17 to 30 kW. To select the optimal power, you do not need to constantly calculate it for each model.

You can hide a gas water heater behind a false panel

It is enough to analyze the following data:

1. Device performance. This is the amount of water that passes through the water heater in 60 seconds.
2. Temperature difference, which is noticed at the outlet and inlet of the water heater when the device is operating. This parameter is indicated by the marking Dt. Depending on the numerical value that follows these letters, you can determine the maximum number of degrees by which the water temperature will increase. If Dt = 35, then the liquid will be heated by 35 degrees.

Required Features

A good geyser has all the necessary functions

In order for a geyser to function correctly, a list of elements is required to maintain its optimal operation:

1. Availability of traction. It should have the optimal width with the grille installed.
2. Indicator, automatically switching set mode columns in case of liquid overheating.
3. Special panel, which displays whether the gas supply is active.
4. A panel that reflects the presence of a flame or indicates the absence of this phenomenon.
5. Indicator showing water pressure.

Additional

And if you choose the right furniture and interior design, the geyser will fit into the interior completely harmoniously

There are sensors on the control panel of the gas water heater. The more there are, the higher the number of additional functions available for use. With their help, you can simplify operation and, in some cases, avoid breakdowns or minor malfunctions of the gas water heater.

Modern equipment should be equipped with 3 levels of protection:

• Repairing gas leaks, if there is a decrease in combustion or cessation of draft in the chimney.
• Protection of structural elements and the shell of the geyser from overheating, which allows you to keep parts in full working order for a long time and prevent rapid wear of the elements.
• Device operation pauses if the water supply stops or there is no pressure. This security system will be activated not only when the device is turned on, but also when any disturbances occur with the supply of combustion elements during the active operation of the gas water heater.

Rare models have a system that automatically indicates emerging malfunctions, which makes repairing the device cheaper, and also allows the owner of the device to independently repair some parts, if this does not cause harm to human health. The cause of the breakdown is displayed in text form on a specially designated display. There are models that allow you to prevent impending damage to the system in advance, but they are expensive.

How to integrate a gas water heater into the kitchen interior:

Manufacturers

You can hide the gas water heater in a niche

To choose the best geyser, you need to determine which positive aspects of this product interest you most, and then find a manufacturer whose products have them to the maximum extent. Exist companies that occupy leading positions in demand:

1. Ariston. This is the best option for people who want to get acceptable quality at a low price. The company provides products created on machines in Italy, so there is no doubt about their excellent work. Instantaneous water heaters This manufacturer is distinguished by its most efficient operation. They are able to maintain a preset temperature without deviating from it, which is convenient when using water for washing dishes or bathing, especially if water procedures passes Small child. The main installation components are made from composite material, characterized by a record period of trouble-free operation and anti-corrosion properties.
2. Termaxi. Products from this manufacturer are made in China. The peculiarity of this technique is relatively low price combined with excellent quality, since high-quality parts are used. These devices are equipped with a modulating burner. There is a model that is capable of heating 12 liters of liquid per minute. Three water supply sources can be connected to such a device simultaneously.
3. Vaillant. Equipment of this brand is appreciated high quality, and produced in Germany. Gas water heaters are reliable and easy to use, while requiring virtually no special care. They are always equipped with a copper heat exchanger, which allows you to use the device for the maximum amount of time without worrying about your own safety.
4. Beretta. This Italian company distinguished by particularly high-quality water heaters, as evidenced by consistently positive reviews from consumers. The reason for this phenomenon is comfortable control and uninterrupted use of water, the ability to clearly regulate its temperature. All components are made taking into account the need for their durability. Each model has design decoration, which looks beautiful in any kitchen. It is possible to select products to suit any needs and adapt them to a maximum number of design styles, since the manufacturer provides a huge selection of geysers.

Operating principles of different geysers:

Rules for safe installation and operation

The geyser can only be installed in accordance with the gasification project. Reliable ventilation must be provided in the room where it is installed.

In order for the device to last as long as possible, you need to use it in a gentle manner.

The main thing is safety.

To avoid accidents during operation geyser, and also maintain the serviceability of the water heater, you must follow several instructions prohibiting the use of the device:

1. If possible, do not carry out independent and its launch.
2. Allow small children to use the gas heater, as well as those people who cannot or do not want to read the instruction manual.
3. Use gas to operate the device that is not intended for the specific type of system, that is, it is not indicated in the list of possible applications.
4. Blocking or completely blocking the hole at the bottom of the door or back, which is intended for air flow, is necessary to maintain combustion.
5. Turn on the device if the chimney is not equipped with a draft or is clogged.
6. Use a gas water heater that requires repair. This can be observed by the loss of some functions, decreased efficiency or malfunction of some elements.
7. Disassemble or repair the device without the appropriate skills.
8. Change the design, that is, add or subtract components.
9. Leave the room for a long time when leaving the speaker running.
10. Leave explosive or flammable products near a working gas water heater.

Geyser care

In the old Khrushchev-era gas water heater a mandatory attribute

You need to treat this device with care, prevent it from becoming clogged, and also regularly clean the ventilation mesh and the opening for air entering the system. In order for the automatic geyser to work for the maximum amount of time, you should not do such things:

1. Simultaneously request both hot and cold water . This threatens failure or malfunction of the heat exchanger.
2. Turn off the column after each period of use, as this may cause the piezo element to break, since it is not designed to function every time it is turned on.

Sometimes the wick may go out when burning. This is possible during a prolonged storm or windy weather. Massive air currents can enter the chimney, which leads to the extinction of a weak fire. When this problem is noticeable, you need to immediately reconnect the wick.

1. Close the gas valve b, make sure the handle is pushed all the way.
2. Open windows or other sources of air, ventilate the room as much as possible.
3. Contact the gas service at 104.

The correct choice of a geyser is determined by a careful review of the main and additional functions, their comparison for each model, taking into account the price equivalence. If all the features are analyzed correctly, you can choose the most suitable option for your own home.