It has proven itself excellently in the field of reinforcing asphalt concrete road structures and soil structures. Price of PSD mesh from a domestic manufacturer is significantly lower than foreign analogues. However, the quality of the product is as high as the quality of imported geomaterials. According to research, polyester mesh will soon completely replace fiberglass geogrids, which currently still dominate the market for geomaterials for the road industry.

Unique properties of geogrid PSD

The above-mentioned geosynthetics are classified according to the manufacturing method and their intended purpose. You can select geogrids PSD, intended for reinforcing asphalt concrete and soil, as well as mono-oriented and bio-oriented drains. Data is produced roll materials based on high-modulus polyester threads, which are subsequently impregnated with a special bitumen composition. The presence of bitumen on the surface of the product provides more reliable adhesion of the mesh to the asphalt. Protective covering can also be made on the basis of polyvinyl chloride. The elongation of this geosynthetic material at maximum load is approximately 13%. Maximum breaking load values ​​depending on the type of mesh: 35, 45 and 50 kN/m. The same width indicators are 30, 40, 45 and 50 kN/m. The product does not lose its performance characteristics even when the temperature increases to +190°C.

Technical characteristics of geogrid PSD

Indicator name	Unit change	Standard for geogrids grade PSD
		(50x50)-32x38	(45x40)-25x25	(35x30)-25x25	(45x40)-40x40	(35x30)-40x40	(50x45)-32x42
Average distance between rovings
- based on	mm	32±3	25±3	25±3	40±5	40±5	32±3
- one duck at a time	mm	38±3	25±3	25±5	40±5	40±5	42±3
- by lenght	kN/m	50	45	35	45	35	50
- in width	kN/m	50	40	30	40	30	45
Elongation at maximum load
- longitudinal direction	%	up to 15	up to 13	up to 13	up to 15	up to 15	up to 15
- transverse direction	%	up to 13	up to 12	up to 12	up to 13	up to 13	up to 13
Heat resistance, no less	°C	190	190	190	190	190	190

Main functions and benefits of use

The main purpose of this geosynthetic is to reinforce road surfaces at the construction stage and during the process of reconstruction or repair. The reinforcing functions of the mesh are also in demand during the construction of soil objects for various purposes. Due to the high quality and unique characteristics of the feedstock (PEF), PSD geogrids are recommended for use in the construction of federal highways, i.e. subject to constant loads. As a result of using the product, the quality increases road surface, its service life is increased and the time between repairs is reduced. Quality repair work, during which it is used design mesh, an order of magnitude higher than restoration measures carried out according to the standard scheme without the use of geosynthetics.

On the website of the NPO Geotekhnologii company you can buy geosynthetic materials such as geogrid, geotextile, geogrid, geomembrane. Road mesh 150x150 is also sold on the website. To purchase it, just leave an online application or contact the managers.

Features of installation and operation

The cell sizes of this geomaterial vary from 25 x 25 mm to 50 x 50 mm. Installation of geogrid PSD ensures uniform distribution of local loads exerted on the road surface. This prevents the appearance and development of landslides, cracks and holes. The mesh does not decompose, does not rot, does not oxidize, does not react to an aggressive external environment, and also does not lose its working properties in wide range temperatures This the best choice, if it is necessary to extend the service life of the road surface, thereby reducing the costs of its subsequent operation and maintenance. The service life of the product declared by the manufacturer is 120 years or more.

Scope of application of the design and design grid

This geosynthetic is in demand in road construction, in the construction of airfields and bridges, as well as in the laying of main pipelines. Using this unique geomaterial, reliable retaining soil structures designed for high loads are erected. Design grid– a worthy replacement for imported analogues, fully reproducing their technical characteristics and performance indicators. The product does not allow cracking of the asphalt-bitumen coating and can be laid without preliminary preparation on an existing one. concrete base and reliably reinforces both the coating itself and the connecting seams contained in it.

In order for the asphalt surface to be of high quality and serve for a long time, when laying it, it is used geogrid PSD 50x50. It consists of rolls of polyester threads impregnated with bitumen. This impregnation ensures the best adhesion to the material, in particular to asphalt. Polymer geogrid is made from polyamide and polyethylene, polyester and polyester, polypropylene and fiberglass.

By purpose they are allocated geogrids for soil and asphalt concrete. According to the manufacturing method, they are mono-oriented and bio-oriented to increase resistance to static and dynamic loads.

Unlike products made from fiberglass, this geogrid is more durable and can even be used in the construction of federal roads.

Also this material is applied during the construction and reconstruction of bridges, overpasses and airfields, it is used to erect retaining walls and platforms designed for high loads.

Another area of ​​application for this miracle material is the reinforcement of asphalt pavements. When using it, the likelihood of any defects appearing on the roads is reduced significantly. Thanks to polymer geogrid PSD 100x100 the pressure on the material under which it is placed is distributed evenly. The occurrence of cracks, holes and collapses on asphalt road surfaces is reduced to an absolute minimum.

Polymer geogrid is used PSD (polymer mesh road) and to strengthen slopes in order to reduce the likelihood of mudflows.

It is worth noting that the cost of geogrid is not that high, so we can assume that soon polymer geogrid will completely displace its fiberglass competitor. In general, this would be quite logical, since polymer material has better adhesion to the surface, and is also more wear-resistant. It is not subject to rotting, its operating temperature range is quite large, and in addition to all this, the geogrid is completely immune to influence chemicals. This best material, capable of providing a smooth and high-quality road surface, while maintaining it in impeccable condition for many years.

In order to buy geogrid PSD at a favorable price in Moscow, Krasnodar, Rostov-on-Don, Sochi, Voronezh, Volgograd, Novosibirsk, Omsk, St. Petersburg, Yekaterinburg, Kazan, contact the sales department by toll-free 8-800-700-70-51

Price: from 50 rub/m2 In stock

Send a request

Order

For soil reinforcement and for strengthening asphalt concrete pavements, PSD geogrid is very widely used. These roll materials are produced from special high-modulus threads that have good bitumen impregnation. This material adheres well to asphalt pavement, since bitumen has good adhesion. The mesh coating can be PVC, and the cell size varies from 25*25 to 50*50. Plastic reinforcing mesh PSD is used to strengthen the road surface during construction and repair, as well as when reinforcing soils. Since the material is made of polyester threads, it can last for a long time, which makes it possible to use it for the construction of federal highways.

Application area

Geogrid design can significantly improve the quality of the road surface, as well as extend the period of maintenance-free operation. Asphalt concrete meshes have become the most popular, and such plastic reinforcing meshes are used as a full replacement for imported products. If we talk about the price parameter, then the cost of such a mesh is significantly lower than that of foreign analogues, and the quality is no worse.

Mainly, geogrid PSD is in demand and is used to prevent cracking of asphalt. When paving, nets can be laid on an old concrete base, and they also strengthen the connecting seams. Thanks to the use of this material, the quality of repairs can be significantly improved.

Advantages

As already noted, compared to other similar materials, PSD geogrids have a number of advantages:

• They can last much longer than fiberglass materials. This makes it possible to use design and estimate documentation for the construction of roads of any type;
• The wide range of applications is due to the fact that geogrid can be widely used in many areas of construction. She can do quality road pavements higher.
• It is a good reinforcing element, and the cost of an elastic reinforcing mesh will be lower than the cost of other types of coatings.
• High quality, confirmed by numerous tests, which remains at a high level.

Thus, PSD will help to easily prevent the formation of cracks on roads. It can be laid on an old concrete base, as well as strengthen seams and layers of asphalt when constructing environmental facilities and other structures. If Railway will pass through soft soils, then in a short time a settlement appears, which will ultimately lead to the need to tamp down crushed stone, and this is quite expensive. Therefore, engineers must choose an option to strengthen the ballast layer when constructing roads.

Name	Cell size, mm	Elongation in the longitudinal direction at maximum load, %, no more		Elongation in the transverse direction at maximum load, %, no more
			Coated with PVC plastisol	Impregnated with bitumen dispersion	Coated with PVC plastisol
PSD(35x35)-25x25
PSD(35x35)-30x30
PSD(35x35)-40x40
PSD(35x35)-45x45
PSD(35x35)-50x50
Design and design documentation (50x50)-30x30
PSD(50x50)-35x35
PSD(50x50)-40x40
PSD(50x50)-45x45
Design and design documentation (50x50)-50x50
PSD(80x20)-35x35
PSD(100x20)-35x35
Design and design documentation (100x20)-40x40
Design and design documentation (100x20)-40x40
PSD(100x100)-35x35

You can buy PSD geogrid from us; our company always offers only high-quality products at low prices. We have been working for a long time, and we can guarantee that cooperation with us will bring you convenience and, most importantly, savings.

Purchasing geosynthetic materials requires careful selection of a supplier. At the same time, it is worth assessing not only the cost of the product, but also its quality and the ability to deliver the required volumes on time. If you want to buy a 50x50 PSD geogrid at the manufacturer’s price in Moscow and the regions, you should contact the GeoSM company. We cooperate with many large consumers of geosynthetics, including wholesale distributors and end contractors. Having our own production base allows us to maintain stably low prices And high level quality, as well as fulfill orders of any level of complexity on time.

Advantages of Geoflax geogrid
+ Reduces the amount of work and labor costs by up to 50%, while reducing direct costs for traditional types of fortifications
by 20-30%.
+ In the production of geogrids, the connection is made by welding seams using laser fastening, which can significantly increase the strength of the material. With standard needle stitching, excessive perforation occurs,
which, accordingly, reduces the breaking characteristics.

Thanksgiving letters

Possible parameters of geogrid design and design documentation

Geogrid PSD is made of polyester fibers, which are combined into bundles (rovings) intertwined at an angle of 90 degrees. To ensure better adhesion to surrounding materials and to increase the level of protection, the threads are impregnated with bitumen and, if necessary, covered with an additional polyvinyl chloride sheath. Possible parameters of the PSD geogrid include high breaking load - from 35 to 50 kN/m, as well as moderate elasticity - 11-15%. There are many varieties of PSD mesh on sale, of which two options are the most popular.

Geogrid PSD 50x50 32x38 is considered the most durable option - it can withstand loads of up to 50 kN/m in both the transverse and longitudinal directions without breaking, while the PSD mesh has a fairly high elasticity - the relative elongation reaches 15%. The heat resistance limit of such a mesh is 190 degrees.

Geogrid PSD 32x38

Geogrid PSD 32x38 is available in several versions. The most common is the above Geogrid PSD 50x50 32x38, but there are also modifications with other characteristics. Their ultimate load varies between 30–45 kN/m, and their elasticity is 11–13%. The maximum heat resistance of the material is 190 degrees.

Functions and benefits of using a geogrid design

Geogrid PSD in many industries is replacing the more familiar fiberglass analogues. Compared to them, it has the following advantages:

• Greater elasticity, the ability to easily restore its shape after deformation;
• Resistance to rotting, as well as biological and chemical influences;
• Increased heat resistance, the possibility of laying in a hot coating;
• Lower cost, ease of transportation and installation.

The main function and advantage of using the 50x50 PSD geogrid, as well as its analogues, remains reinforcement. The material evenly distributes the loads on its surface, and also connects the individual layers of the road surface or soil together. In addition, the mesh significantly reduces the mobility of the base, ensuring its stabilization and increasing its load-bearing capacity. In combination with geotextiles, such a strengthening agent can also become the basis for a high-strength drainage structure that protects objects from frost heaving of the soil.

Application of geogrid PSD

Design and design grid

It is worth buying geogrid PSD 50x50 32x38 for use in road construction. It not only increases the reliability of the coating, but also helps reduce the costs of constructing a transport highway - due to its low intrinsic cost, ease of installation and reduced consumption of expensive imported materials. A mesh of this design can be used in the construction of highways and railways. In addition, the areas of application of geogrid design and design documentation include:

• Repair of old road surfaces, prevention of cracks and failures;
• Restoration of large structures, laying a new layer of concrete on the old foundation;
• Increasing the strength of artificial uneven surfaces;
• Construction of hydraulic structures and artificial reservoirs;
• Combating landslides and erosion.

Geogrid price PSD

If you are interested in the price of geogrid PSD 50x50 32x38 and other types of materials, you should contact the manager of the GeoSM company - for this you can use the phone number provided on the web page or the online order form. We provide significant wholesale discounts, so the cost will depend on the volume ordered.

Buy PSD geogrid wholesale

If you decide to buy PSD geogrid wholesale from GeoSM, you will receive many advantages. Among them, it is worth noting not only affordable prices and guaranteed quality of material, but also timely execution of orders, as well as the ability to produce non-standard products in the shortest possible time.

The minimum shipment for this product group is 30,000 rubles.

/

We offer high-quality geosynthetic material at the best price. You can buy PSD geogrid from us in any quantity, which adequately represents a range of geosynthetic products. This material is in extraordinary demand today, especially in construction conditions, when it is necessary to quickly and efficiently build roads on weak foundations.

– rolled geosynthetics with PVC coating, which has high performance indicators. Geogrid improves the quality and reliability of the constructed structure, and also increases its maintenance-free life.

Reference: Anchors for fastening geogrids in the form of L-shaped and U-shape. They can be made of plastic, metal or fiberglass composite. Bentonite mats, the use of which is widely known in waterproofing work, are characterized by self-healing during deformation.

Unique characteristics of geogrid PSD

High-modulus polyester threads are used to produce PSD mesh. To obtain good adhesion, it is impregnated with a special bitumen composition. As a result, the resulting material does not corrode and is highly resistant to UV and aggressive environments. Geogrid PSD operates in a wide temperature range and is resistant to local loads and deformations. The mesh elongation under load is 13%. Geosynthetics do not rot, do not decompose and are absolutely safe.

Technical properties of geosynthetic mesh PSD

Indicator name	Unit change	Standard for geogrids grade PSD
		(50x50)-32x38	(45x40)-25x25	(35x30)-25x25	(45x40)-40x40	(35x30)-40x40	(50x45)-32x42
Average distance between rovings
- based on	mm	32±3	25±3	25±3	40±5	40±5	32±3
- one duck at a time	mm	38±3	25±3	25±5	40±5	40±5	42±3
- by lenght	kN/m	50	45	35	45	35	50
- in width	kN/m	50	40	30	40	30	45
Elongation at maximum load
- longitudinal direction	%	up to 15	up to 13	up to 13	up to 15	up to 15	up to 15
- transverse direction	%	up to 13	up to 12	up to 12	up to 13	up to 13	up to 13
Heat resistance, no less	°C	190	190	190	190	190	190

Main functions and benefits of use

The main function of this geomaterial is to strengthen the soil and reinforce asphalt concrete structures. As a result, the use of geosynthetics significantly improves the quality of the road surface and its service life. In addition, the introduction of geogrid allows reducing the volume of crushed stone. Thanks to this, the cost of construction is reduced. The service life of geogrid is about 120 years.

It has been experimentally proven that the use of mesh reduces the occurrence of cracks and the formation of ruts on the road surface.

Features of installation and operation

The geogrid installation process is quite simple and does not require the involvement of specialists or any special equipment or tools. It is laid in the longitudinal direction on a previously prepared base, compacted if necessary. Being resistant to aggressive environmental influences, geogrid PSD does not require maintenance.

Where did the PSD mesh find its application?

Properties design mesh allow its use in the construction of roads, including federal ones, in the construction and repair of bridge structures, overpasses and airfields. Geosynthetics are also used in the construction of landfills, retaining walls and the construction of various hydraulic structures.

You can order a product at an affordable price or ask questions by contacting any phone number in the “Contacts” section or filling out a special online application directly from the site itself.