The architectural bureau of Alexey Sukhov developed original project corner bathhouse, which will be brought to life in a cottage village near Moscow White Beach. Since the general appearance of this settlement with its ponds and natural forest areas is perceived as a corner of wild nature interspersed with civilization, our task was to organically fit the object into the landscape, without forgetting about its practicality, comfort and functionality. More details about the result are below.

Stylish corner bath: room layout

So, our corner bathhouse in the project consists of a small vestibule, a spacious lounge with a kitchen, where there is everything to prepare almost any dish and set the table for a crowded company, a cozy fireplace and TV, as well as an appropriately equipped dressing room, from which you can get into the shower room, and then into the sauna, or you can go straight into a room with a large jacuzzi (it acts as an equivalent replacement for a traditional swimming pool).

In addition, the building has a bathroom and utility room. Since one of the client’s wishes was a corner one, we built a semi-open veranda-gazebo with a solid brick oven, in which you can cook not only barbecue, but also any other dish that requires frying, stewing or simmering. And right from the gazebo there is access to an open sunny terrace, blown by a warm summer breeze from all sides. It is comfortable here to sunbathe on a hot afternoon or enjoy the surrounding landscape with a cup of tea or a glass of wine on a warm summer evening.

Materials and techniques in the construction and finishing of a corner bathhouse with a terrace

To implement the project, we chose strong, durable and energy-efficient SIP panels. The corner bathhouse will be built according to Canadian frame-panel technology– it’s fast, inexpensive, convenient and reliable.

To cover gable roof Our experts settled on chocolate brown flexible bitumen shingles. Against its background, narrow chimneys covered with laconic umbrellas look especially aristocratic and elegant.

The basement of the building is finished in brown facing bricks, and the walls and floor are made of natural thermowood. The walls of the veranda are half open, so fresh air freely penetrates into the room, while a good-quality roof provides everyone who is inside the gazebo with reliable protection from precipitation and sunlight.

The facade glazing of our bathhouse with a terrace is designed according to the type French windows- the entire height of the wall. In fact, these are not windows, but sliding glass doors that allow you to quickly go from the street directly to the rest room and provide the relaxation room with full natural light.

According to the project, the bathhouse will be protected from uninvited guests and idle glances by an elegant fence made of wooden pickets and wild stone pillars on the same base. Approaches to the building must be paved paving slabs, but we decided to leave the surrounding area as close as possible to the natural landscape - with green grass and a small number of single bush plantings. In this appearance, the corner bathhouse designed by our architectural bureau will be able to harmonize with general view cottage village.

Architectural bureau of Alexey Sukhov. https://site/

Layout of the corner bath:

Exteriors:

Among the typical bathhouse designs, one can single out the L-shaped configuration as rational in a practical sense and very convenient for creating cozy atmosphere. There may be objections that square buildings have a minimal surface area, implying unjustifiably large heat losses from baths of this type. It's not like that at all. Firstly, it is in corner baths that the main source of heat loss is the steam room. It has a shape close to the most economical. Secondly, for the purpose fire safety on small area the distance from the house to the bathhouse should be as large as possible - the projects satisfy this condition corner baths.

Budget option for a bath

Don't expect standard project wide variety of layouts. For an L-shaped layout, 25-40 m2 of total area is enough to clearly highlight three functional areas : shower, steam room and relaxation room. The steam room, where the main heat leakage occurs, has a shape close to a square, that is, optimal. It is always located at one of the ends of the bathhouse. At the other end, if there is enough space, there is a veranda or open terrace. That is, the differences between the designs of corner baths, not counting the mirror ones, mainly come down to the question: is there a veranda (terrace) or not. In any case, this area is more than enough for a full-fledged bathhouse.

The main subtleties and difficulties lie in the design of the steam room. Without this, the bathhouse itself loses all meaning. The simplest solution seems to be to install electric heater, may cause conflicting requirements. A small, cramped steam room will not suit every owner, and a large volume dictates the availability of sufficient power or even a three-phase line, and this is not always feasible.

It is best to focus on a project that involves the construction of a full-fledged brick stove in the bathhouse. In this case, the bathhouse takes on a finished look, in which the stove not only performs its main function, but will also be the main decorative element - if desired, you can find bricks of a wide variety of shapes and colors. Such a bathhouse will have a natural luxury that is inaccessible even to expensive, luxury apartments - a live fire. Budget simple projects does not provide for the construction of a full-fledged swimming pool, but the installation of a font is quite possible - this is an excellent addition to the steam room.

Design and landscaping as a consequence of configuration

One look at the L-shape is enough to see its advantages:

Stages of project implementation

Even before buying a currant bush, many owners make inquiries about the varieties and the seller. The construction of a bathhouse all the more requires attention: everything looks quite simple, but it is better not to allow negligence in such matters as the stove and steam room.

The topic of the steam room is very subtle and deep. It is worth reading special articles in this direction. For example, they offer various options filling of the heater, the best of which is, perhaps, jadeite or white quartz.

If you have a plot outside the city, the idea of ​​ordering a bathhouse project has probably occurred to you more than once. The Tsar Bath company will be happy to become your guide to the world of bathing traditions of our ancestors, who cared about their health.

But we have a special offer for you. It is quite possible that you will be interested in a turnkey corner bathhouse. You will not only feel closer to nature, but you will also save a significant amount thanks to the features of the construction of such a steam room.

Corner bathhouse: what is the attractiveness of this option?

Turnkey corner bathhouse projects involve placing the premises of the building in the shape of the letter “L”. Considering that purchasing a large plot of land near Moscow is quite expensive, this best option for the construction of a steam room in limited space.

You should take a closer look at our turnkey corner bath projects for the following reasons:

1. We are ready to make both a standard and an exclusive project for you, taking into account any of your wishes and financial capabilities. you describe appearance and the interior of your bathhouse - our specialists bring it to life on paper.
2. Our log bathhouse will look great even on a standard plot of 6 acres thanks to its unconventional design, which ensures a more compact placement of premises.
3. Our company’s projects have a huge advantage – energy efficiency. In the corner baths, the steam room, shower, and relaxation room will be located as close as possible to the stove. This means you get maximum comfort and minimal expenditure on additional heating.

How to properly build a corner bathhouse in the national style

The qualifications of our specialists are quite high, so the construction of corner baths will not cause them any difficulties. Among the undoubted advantages of working with us, we note the following:

1. We work only with suppliers of high quality material. The client can choose the option that suits him based on the price. A bathhouse made of logs or profiled timber - any of these buildings will be built in strict accordance with the project and modern construction standards. Therefore, its durability and safety for health is beyond doubt.
2. When constructing corner baths, we strictly adhere to the deadlines specified in the contract, regardless of the complexity of the project.
3. The construction of such buildings will cost you significantly less due to the ability to use not only long beams or logs, which is explained by the special architecture of the corner bathhouse.

We are ready to guide our clients through the entire cycle of creating an elite bathhouse - from design to construction - with minimal costs and without loss of quality. The final price for the final product of our cooperation will undoubtedly please you.

A special feature of corner baths is their unusual shape. In classic corner version the main part of the room (steam room and washing room) is built perpendicularly, at an angle of 90⁰ to the additional rooms for leisure activities.

Why build a corner bathhouse, and what advantages does it have over a rectangular structure?

1. The stove in such buildings is located in the middle between the steam room and the relaxation room, so it can heat the entire room, which is especially important in winter.
2. Corner baths are designed specifically for installation in areas small sizes or in courtyards where there are already additional buildings, flower beds, garden furniture and other decorative elements. The building is necessarily located in one of the corners of the site, and therefore does not take up much space and does not disturb the overall composition.
3. A building whose shape resembles an angle or triangle is a rather unusual and interesting architectural solution.

In addition to all its additional advantages, compact corner baths, made by experienced specialists, will perfectly cope with their main purpose - to help a person or a group of people have a good time.

Corner sauna made of timber

The compact building is equipped with a vestibule room, which further contributes to the preservation warm temperature in the building even in the coldest weather.

This project takes up very little space on the site, but at the same time the building is quite spacious and practical.

The rest room and washroom are combined here, which allows you to save more free space in the room and save on costs Construction Materials.

The presented project has a very interesting triangular shape and will look original on any summer cottage.

On the ground floor there are all the main components (steam room, wash room, vestibule and bathroom), and on the second floor there is an additional recreation room where you can equip a kitchen, billiard room or even a workshop and a very spacious balcony on which summer time good for romantic dates and friendly gatherings.

This project is very remarkable due to its unusual design and spacious open veranda.

There is a barbecue oven installed on the veranda, so during the warm season, barbecue parties can be held here.

Inside the building there is a steam room, separate washrooms and toilets, and three rooms for rest and leisure, which can be furnished to your own taste.

The project with a terrace and barbecue will appeal to all lovers of bathhouses and traditional outdoor recreation, since it combines all the components for an ideal leisure time.

Corner sauna for 10 people

A wonderful project with a spacious steam room and an open terrace that can comfortably accommodate a group of up to 10 people.

Bathhouse with swimming pool 129 sq.m. m.

An elegant structure is guaranteed to decorate your site and give it status. A room equipped inside the building with a swimming pool of more than 40 square meters cool down comfortably after water procedures.

The building has a main (from the terrace) and an additional (from the porch) entrance, is equipped with a separate kitchen and guest room, separate bathroom and comfortable steam room.

On the second floor there is an additional guest room where you can arrange a bedroom or a billiard room, which will allow you to use the building as a guest house or even the main house.

Bathhouse with veranda and barbecue 8x9

A surprisingly compact and at the same time very pretty and roomy building project with a barbecue is an ideal choice for people who are concerned about the issue of comfortable leisure time.

Enclosed veranda With large windows allows you to comfortably spend time in the bathhouse both in summer and winter. The building also accommodates small room rest room, washroom, steam room and bathroom.

Bathhouse with veranda and barbecue 8x10

Small bathhouse with a separate barbecue room can safely be called successful architectural solution, since the building measures 8x10 and actually accommodates a spacious kitchen combined with a dining room, a living room, a separate bathroom and a steam room.

The developers also propose installing a fireplace in the relaxation room to maintain an atmosphere of comfort and opportunity autonomous heating all rooms of the bathhouse.

In fact, in such a building you can not only spend your leisure time comfortably, but even organize holiday parties, accommodate unexpected guests and live independently.

Two-story bathhouse made of laminated timber 94 sq.m.

Buildings made of laminated veneer lumber are distinguished not only by their reliability, but also by the high speed of assembly of the structure. By ordering the construction of this project, you will be able to enjoy the procedures on your own site in the shortest possible time.

The two-story bathhouse with a separate boiler room is very convenient and designed, first of all, taking into account the comfort and hygiene of visiting the steam room and living in the house.

The first floor contains all the main rooms, including a toilet room, kitchen and living room, and the second floor is ideal for a bedroom. Thus, this building can perfectly perform not only its main functions, but also serve as an excellent place for a small family to live.

L-shaped bath

The L-shaped project is designed specifically for placement in the corner of the site. The building combines a separate dressing room, steam room, washroom, bathroom and vestibule, as well as a spacious lounge.

The price of building a log bathhouse 6x6 without finishing under the roof is 285,000 rubles

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• The strapping is timber with a cross-section of 150x100 mm in two rows, treated with an antiseptic.
• Floor joists - board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• External walls – profiled timber natural humidity section 145x90 mm (wall thickness – 90 mm) “block house” or straight profile. There are 17 crowns in total.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• Clear ceiling height of the first floor (from the floor joist to the floor beam) – 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• Attic partitions - frame made of 40x75 mm bars.
• Rafters - trusses made of boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of boards with a section of 150*40 mm, 100*40 mm. Exterior decoration pediments – lining (AV pine) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables one-story buildings a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• The sheathing is a board with a section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). Cornices and overhangs are hemmed with clapboard (pine AB) 17*90 mm.
• Installation of window and doorways with a dressing crown, without installing casing bars.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of a house/bath on the customer's site.

The price of a turnkey 6x6 bathhouse with a foundation and stove is 433,000 rubles

• The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks in a cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is treated with a protective compound.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is dry tongue and groove batten(AB pine) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Inter-crown insulation – jute fabric 6mm thick
• Inter-crown connection - on a metal dowel (construction nail 6x200mm, 250mm).
• Corner connection - “half a tree”. The outer corners of the log house are covered with clapboard (pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (AV pine) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (AV pine) 17*90 mm. Vapor barrier – NANOIZOL V.
• The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
• The ceiling lining of the first floor (except for the steam room) is lining (AV pine) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (AV pine) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is clapboard (AV pine) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (AB pine) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (AV pine) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
• In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). Cornices and overhangs are hemmed with clapboard (pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm (ventilation gap – 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
• Installation of the ERMAK 12/ERMAK 16 furnace with a hanging tank (35 l stainless steel) for heating water.
• The base of the stove is brick in one row. Cutting the combustion portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, reflective screen made of smooth galvanized steel on basalt cardboard, flue sheet.
• The chimney is vertical, with an outlet into the roof through the ceiling. Starting tube - stainless steel 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115*200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in a washing room shower tray 800*800 mm with siphon. The drainage outlet beyond the perimeter of the bathhouse is a plumbing PVC pipe with a diameter of 50 mm.
• The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
• The entrance door is wooden, paneled, solid (pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. On front door a padlock is installed.
• Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• In window and doorways casing bars (swarms) are installed.
• Sealing of corners, joints, abutments - pine A/aspen AB plinth.
• Finishing windows, doors - pine frame A on both sides, aspen AB
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bathhouse at the customer's site.
• BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

CONSTRUCTIVE	SHRINKABLE	FULL CONSTRUCTION
Columnar foundation made of concrete blocks 200*200*400	Yes	Yes
Double strapping made of timber 150*100 mm	Yes	Yes
Floor joists made of boards 40*150 per edge with a pitch of 600 mm	Yes	Yes
Subfloor made of boards 22*100/150 mm	No	Yes
Floor insulation with hydro and vapor barrier	No	Yes
Finish floor – dry tongue-and-groove floorboard 36 mm	No	Yes
Walls and partitions made of profiled timber of natural moisture with a cross-section of 145*90 mm (wall thickness – 90mm)	Yes	Yes
Assembling a log house on steel dowels	Yes	Yes
Corner connection - half a tree	Yes	Yes
Intercrown insulation - jute	Yes	Yes
Rafters - trusses made of timber 40*100/150 mm with a pitch of 900/1000 mm	Yes	Yes
Sheathing – board 20*100/150 mm	Yes	Yes
Roof covering– ondulin / galvanized corrugated sheet C20	Yes	Yes
The eaves and roof overhangs are lined with AB pine clapboard	Yes	Yes
Window and door openings with a dressing crown, without installing casing bars	Yes	No
Window and door openings with installation of casing bars	No	Yes
Installation of windows and doors	No	Yes
Ceiling lining – pine lining AB	No	Yes
Insulation + vapor barrier of floors/attics	No	Yes
Finishing the walls and ceiling of the attic - pine lining AB	No	Yes
Finishing the walls and ceiling of the steam room - aspen lining AB + shelves	No	Yes
Installation of stove and chimney	No	Yes
Installation of a shower tray 800*800 mm with a siphon in a washing room. Exiting the drain outside the perimeter of the bathhouse	No	Yes
Stairs to the attic	No	Yes
Finishing: plinth, platbands	No	Yes
Loading a set of material, delivering it up to 400 km from our base, unloading at the customer’s site	Yes	Yes

Name	Cost, rub)	Unit
Construction of foundations on screw piles or reinforced concrete foundations	8-921-930-69-80, 8-926-742-95-01
Decorative finishing plinth - pick-up ()	1000-1600	linear meters
Installation of reinforced concrete slabs 500*500*100 mm for support pedestals ( )		PC.
Protection (backing board) of the first row of strapping made of larch boards 50*150 mm ( )		linear meters
Protection (backing board) of the first row of strapping made of larch boards 50*200 mm ( )		linear meters
Double strapping made of timber 150x150mm		linear meters
Double strapping made of timber 150x200mm		linear meters
Installation of floor joists made of timber 150x100mm		linear meters
Installation of larch floors decking boards“corduroy” (for open terraces)()	2000	m*2 floors
Installation of finished floors from tongue-and-groove larch floorboards 27 mm ( )	2000	m*2 floors
External walls made of profiled timber are moisture resistant with a section of 145x140mm, partitions are made of profiled timber. humidity section 145*90 mm	2500	linear meters external walls
External walls and partitions made of profiled timber chamber drying section 145x90 mm	2300	linear meters external walls And partitions
External walls made of profiled kiln-drying timber with a cross-section of 145x140 mm, partitions made of profiled kiln-dried timber with a cross-section of 145x90 mm	4000	linear meters of external walls
The outer walls are made of profiled timber. humidity with a cross section of 145x190mm, partitions made of profiled timber. humidity section 145*90 mm	4500	linear meters of external walls
External walls are made of profiled chamber-drying timber with a cross-section of 145x190 mm, partitions are made of profiled chamber-drying timber with a cross-section of 145*90 mm.	5300	linear meters of external walls
Set of kiln-dried lumber ( )	1000	m*2 building area
Pairing crowns with a wooden dowel	1000
Assembling a log house using a SPRING UNIT FORCE ( )	2000	linear meters external walls and partitions of the log house
Assembling a log frame with the height of the crowns tied with steel studs	1500	linear meters external walls and partitions of the log house
Corner groove-tenon connection ( warm corner)	6000	one corner of the log house
Corner connection “into the bowl” ( )	from 30 000	house kit
Inter-crown insulation – holofiber()	300/450/600	linear meter of external walls of the log house
Increase in ceiling height by 14cm (+ one crown in the log house)	500/750/1000	linear meters external walls and log partitions
Insulation 150mm		m*2 insulated area
The construction of a staircase on strings made of laminated veneer lumber, with wide steps, turned pillars, balusters and a figured handrail.	25000	PC.
Roof covering – metal tiles RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Roof covering – corrugated sheeting with polymer coating(RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Installation of a drainage system (PVC, DEKE)	1200	linear meters roof slope
Installation of corner snow barriers ( )		linear meters roof slope
Construction of tubular snow barriers ( )	1300	linear meters roof slope
Attic structure: sparse flooring from edged boards ceiling beams, door in one of the gables + dormer window in the opposite gable		m*2 ceiling
External finishing of gables - block house pine AB 28*140		m*2 gable area
External finishing of gables - imitation timber 18*140 mm		m*2 gable area
Treatment of the entire building with fire-bioprotective composition NEOMID ( )		m*2 building area
Surface treatment with oil for terraces NEOMID ( )		m*2 floors
Treating the walls and ceiling of the steam room and washing room with NEOMID varnish “for baths and saunas” ( )		m*2 walls and ceiling
Treatment of the ends of the log house with NEOMID TOR PLUS ( )		opening/corner
Treatment of shelves in the steam room with NEOMID oil ( )	1000	m*2 shelf
Finishing walls and ceilings with washing lining made of larch 14*90mm ( )	1500	m*2 walls and ceiling
Installation of a “leaky floor” in a washing room ( )	5000	m*2 floors
Finishing with paired lining OSIN A, including shelves - OSIN A		m*2 walls and ceiling
Finishing with paired lining LIPA A, including shelves - LIPA A	1200	m*2 walls and ceiling
Finishing with paired lining LIPA EXTRA, including shelves - LIPA Extra	1500	m*2 walls and ceiling
Finishing with paired lining ALKHA Extra, including shelves – ALKHA Extra ( )	1500	m*2 walls and ceiling
Finishing with paired lining ABASH EXTRA, including shelves - ABASH Extra ( )	2100	m*2 walls and ceiling
Installation of insulated steel door Russian made ( more details)	35 000	PC.
Installation of PVC windows with single-chamber double-glazed windows	from 4000	PC.
Installation of PVC windows with double-glazed windows	from 5000	PC.
Installation of a heat exchanger in the ERMAK furnace, installation of a remote tank (stainless steel 60 l) on the wall of the washing room, water supply hot water metal-plastic pipes	20000	PC.
Installation of a tank (stainless steel 50 l) on a pipe above the stove, with a tap leading to the washing room	13 000	PC.
Installation of another ERMAK furnace (	12 000/16000	set
Chimney device from of stainless steel 0.8 mm thick (includes a protective screen and a stainless steel inlet sheet)	16 000/20000	set
Delivery over 400 km from Pestovo, Novgorod region.		km
Construction shed 2.0*3.0 / 4.0 m ()	from 21 000	PC.

The whole country rests on such workers

Alexey Gennadievich!!! Due to lack of time, I couldn’t write to you - thank you very much for the work of your employees in building the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All our friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse we dreamed of.

The guys built us an amazing bathhouse

I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the time agreed upon earlier, the quality of materials and work was excellent top level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and General Director Alexey Roslov for the work done. I ordered a bathhouse with a 6x6 attic, project B-20, with minor changes, “for shrinkage.” All work has been completed ahead of schedule and high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. Next year I will do the finishing with the same team. "Russian Carpenters" wins in all respects compared to other large companies. “Price-quality” is about them. Thank you very much again. I will recommend it to everyone.