New Year's craft: Christmas tree from plastic bottles DIY - another extremely unusual and very beautiful craft from empty used plastic containers. In addition, you don’t have to throw away the bottle, making an original masterpiece out of scrap self made. To make such a Christmas tree you need a minimum of time and expense. A master class on making a Christmas tree from plastic bottles will tell you in detail how to make an original New Year's craft from used materials, including in this case PET containers.

Craft: Christmas tree from plastic bottles with your own hands

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Next you need to make blanks for the branches. In order for the tree to have a cone-shaped shape, the blanks must have different sizes. That is, you need to achieve the following:

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

Now all that remains is to fix each tier of the tree with tape in a circle and a little New Year's craft: the Christmas tree with your own hands is ready!

You can decorate the top of our New Year's tree with a homemade Christmas tree toy or complete the Christmas tree the way we did it.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

Well, if you want to make a craft: A large DIY Christmas tree from plastic bottles, watch the master class on how to make it.

Share your festive mood and new craft ideas, write your reviews, questions and wishes in the comments. We welcome every action on your part. Happy crafts and a wonderful New Year's mood!

Watch other master classes on making using various techniques.

Creative Christmas trees are good because they are unusual; they can be created from the most different materials, and edible trees will become a decoration and the main highlight of the New Year's table.

How to make a Christmas tree from plastic bottles?

To make such a fluffy beauty, take:

• green plastic bottles;
• scissors;
• scotch;
• a wooden stick, the diameter of which is slightly smaller than the hole in the neck of the bottle.

Prepare containers by removing labels and washing them. For each bottle you need to cut off the neck and bottom, cut the rest into several rectangles, chop them into strips, but not completely.

Trim the shoulders of the bottle, leaving only the neck. You will put a wooden stick into it. Starting from the bottom, attach the blanks from the bottle here so that the fringe points up.

We decorate the entire trunk, and attach a small part on top, which will become the top.

The blanks must be fastened in such a way that the largest ones are at the bottom and the smallest at the top.

Here's what else a Christmas tree made from plastic bottles can be like. Making one with your own hands is also quite simple.

To reproduce this masterpiece, take:

• green plastic bottles;
• scissors;
• a wooden stick of a suitable size.

Remove the labels from the bottles and proceed with the blanks as follows: cut off the bottom, cut the remaining part into 10 identical strips, almost reaching the shoulders of the bottle.

Now you need to make diagonal cuts on sides 1 and 2 of each tape. Fold the resulting fragments over one another.

Take the bottom of a large bottle, make a hole in it, insert the neck of the bottle into it, into which a wooden stick is inserted. Secure this part of the structure with a cork by screwing it onto the neck.

Place pre-made parts on the stick, starting with the largest bottle and ending with the smallest one.

If you threaded all the parts onto the barrel with the neck down, then place the last one with the neck up. Secure the tree by placing a lid on the top of the tree.

The result was a wonderful tall tree made from plastic bottles. From this container you can make even more large tree, putting bottles, for example, on a mop.

If you want to make a cone-shaped tree, then roll a piece of paper or cardboard in this way. Cut off the neck of the bottle and insert a paper blank here. Cut trapezoidal fragments from other parts of the container. Chop the longest edges of each piece into equal strips, not reaching the top 2 cm.

Secure these elements with tape, arranging them in ascending order, starting with large and ending with small.

This is what should happen in the end.

If, for example, you work in a grocery store, then you can put up a large Christmas tree made from plastic bottles, which will certainly attract customers. To do this, you need to arrange the bottles in a circle in rows, and place plywood circles on them. Each subsequent tier is smaller than the diameter of the previous one. There should be 3 bottles left closer to the top; place a star on top.

Even empty plastic bottles will become an excellent decorative element. You can backlight it so that the trees sparkle attractively at dusk.

Other waste materials will also become a picturesque Christmas tree.

Making a Christmas tree out of paper with your own hands - master class

Once magazines are read, they are usually thrown away. But you can do it differently, make a paper tree. To create it, you can use newspapers and old books.

Here is a list of what is needed:

• a sheet of cardboard or whatman paper;
• colorful magazine;
• shaped hole punch;
• glue gun or PVA;
• pencil.

First you need to roll the cardboard into a cone and glue it to secure it in this position. Prepare decorative elements. To do this, cut them out from a magazine or book using zigzag scissors or a hole punch.

These parts need to be given a rounded shape. To do this, screw each one onto a pencil. Now you can glue them to the base, starting from the bottom.

Place the pieces as close to each other as possible so that the cardboard is not visible between them. Glue in rows, placing the elements on top of each other. Wrap one of them around the top of your head. The paper Christmas tree is ready.

If you like clean lines, then check out the next option.

This tree would be appropriate in an office. On the one hand, it has a strict shape, and on the other, it looks festive. Here's what you need for this craft:

• whatman;
• double tape;
• wrapping;
• regular tape;
• decorations;
• scissors.

Instead of whatman paper, you can use thin cardboard. If you don't have a large enough piece, then you can create one from small ones using tape.

Roll this base into a ball and secure with tape.

The excess needs to be cut off.

Wrap the cone with wrapping paper. To do this, place it on a work surface, place a cardboard blank on top, and secure it with tape at the top of the head.

Wrap the cone completely, then secure the edges of the paper with double tape and trim off the excess.

The lower part of the tree must also be made flat by removing the paper here with scissors. Decorate the Christmas tree with a star, ribbons, you can decorate it with candies or beads.

Here's what else a paper Christmas tree can be like.

Take:

• skewer;
• designer paper or colored cardboard;
• thick cardboard;
• glue or glue gun.

Draw a square on thick cardboard, cut it out and glue it to a skewer. Cut out circles of the same size first. Make holes in them and place them on a skewer pre-lubricated with glue. Then make several slightly smaller circles. The tree trunk itself is also decorated. Gradually cut out smaller and smaller circles and put them on the trunk.

Here's what kind of paper Christmas tree you can make using polystyrene foam.

For creativity you will need:

• foam or cardboard;
• green corrugated paper;
• scissors;
• adhesive tape;
• masking tape;
• marker;
• PVA glue;
• hook;
• stationery knife.

Draw an acute angle on the foam or cardboard. If this is difficult to do, then follow the photo tips. First draw a vertical line, then two horizontal ones, after which you will have an even angle. If you want to do big Christmas tree, then just use tape to glue several fragments together.

Cut a strip of corrugated paper, chop it with scissors in the form of a fringe, slightly short of reaching the opposite edge. Start gluing these decorated ribbons from the bottom.

When all creative Christmas tree will be framed this way, decorate it as you wish. Glue a rectangle of cardboard from the bottom, having previously painted it in Brown color. But you can do without this part of the trunk. To attach the tree to the wall, use a hook or double tape.

This is what a wonderful Christmas tree came out of paper. Textile models are very interesting; for them you can use leftover material.

Christmas tree made of fabric and threads

To make such a stylish beauty, take:

• felt;
• cardboard;
• scissors;
• double tape or glue.

It is better to take material in two shades, then the creative Christmas tree will look more contrasting.

Roll the cardboard into a cone. You can wrap the bottom part with a small amount of tinsel. Cut felt circles and use scissors to make intersecting sections in the middle. They are needed in order to put the felt blanks on the base, which is what you will do. These X-shaped cuts will also help the circles become wavy.

First put on the larger blanks, then the medium ones, the smallest ones will be on top. When you fill the entire cone, all you have to do is decorate your creation and admire what a beautiful fabric Christmas tree you have made.

You can also make a very cute tree from threads.

To make this, take:

• a cone made of foam plastic or cardboard;
• fleecy yarn;
• pins;
• decorations;
• thick yarn.

If you don't have a foam cone, then roll one out of cardboard. To make the work progress faster, make turns with two threads at once. Attach them to the base with pins.

When you have formed the entire cone, do not cut these two threads, but now wrap them around the base, moving down.

Cut the thread and secure the remaining end with a pin. Decorate the Christmas tree with beads or buttons, and also attach them with a pin or sewing.

The next creative DIY Christmas tree is made from wire and thread. Help yourself with pliers or round nose pliers, bend a piece of wire so that it looks like a star. Attach a thinner wire to it, which must first be rolled into a cone. Wrap it with threads. You can simply make such a star out of wire and attach it to the top of the blue Christmas tree you just created.

Table on New Year will look amazing if you decorate it with edible Christmas trees. Look how wonderful this strawberry tree looks.

You can make a chocolate base and attach the berries to it with the point outward using a toothpick.

Here are some other original trees you can create from products.

Check out the related workshops.

Edible Christmas tree: step-by-step preparation

To make one, take:

• wooden skewer;
• apple;
• cucumbers;
• red and yellow sweet peppers;
• plate.

You can use wooden skewers or one half of a chopstick.

Place the apple half cut side down on a platter or plate. Stick a skewer into it. Chop the cucumber into not too thin slices.

Place these slices on a skewer, starting with the largest one. Arrange them in a checkerboard pattern or approximately so that they look like Christmas tree branches.

Cut small pieces from red and yellow peppers. Place them on some cucumbers or secure them with toothpicks. Thread an elongated piece of pepper onto the top of the head, closing the skewer on top.

You can decorate a New Year's dish with this tree, for example, a salad. Place a little parsley along the edge of the plate, which will symbolize green grass.

The next tree consists of fruits, berries and vegetables. Take:

• large carrots;
• apple;
• kiwi;
• strawberries;
• toothpicks;
• grape;
• greenery;
• hole for removing the core from apples.

Wash the apple. Use a special tool to remove the middle from one side. On the other side, make an even cut so that the apple stands firmly on the plate.

Place the carrot in the hole. Stick toothpicks into it. Thread kiwi halves, strawberries and grapes onto them. The star can be cut from a suitable fruit or vegetable, or from a thick piece of cheese. Decorate a plate with greenery to make the tree look even more picturesque.

The next tree is made from apples. To prevent them from darkening, the cut slices should be dipped in a solution of lemon juice for 15 minutes.

First you need to cut out the middle of the apples, then chop these fruits into circles. Using a knife or a special notch, give these blanks a star shape. Place it on a plate and place a slightly smaller piece on top. Adhering to this tactic, lay the Christmas tree to the end. Decorate it with cranberries and physalis.

If you are making a New Year's salad, lay it out in a cone-shaped mound and compact it. Slice the leek leaves to resemble sharp angles. Stick the resulting decorations into the salad so that the leaves turn into twigs. Decorate the Christmas tree with finely chopped carrots.

If you don't have leeks, then you can garnish the salad with dill. Look at the photos to see how to arrange the branches, starting from the bottom.

A creative Christmas tree can be made from many other products.

Cut the cheese into sharp triangles, thread them onto a pre-attached skewer, and garnish with a slice of red pepper. Decorate the plate with tomato and kiwi slices.

if you have Green pepper, turn its slices into lush spruce branches, make a New Year's tree from this edible material. Circles and slices of lemon or grapefruit will also become a picturesque decoration for the New Year's table.

If you use kiwi for this, use unripe ones so that the circles stick tightly to the base.

Meat lovers will also not be left at a loss. After all, an edible Christmas tree can be created from salami slices.

Place them on a skewer attached to half an apple and drape the top. Decorate the plate with greenery, and the masterpiece can be placed on the New Year's table.

Vegetarians and connoisseurs proper nutrition They will be able to make a Christmas tree out of broccoli, decorate it with cherry tomatoes, and make a star out of sweet peppers. The asparagus stalks will turn into a tree trunk, and cauliflower- into white snowdrifts.

The basis of the next Christmas tree is a salad, but it is better to take one whose ingredients can be held together well. A dish that contains boiled rice is perfect. Decorating the base green leaves salad, then you need to decorate this edible Christmas tree with peeled shrimp and cherry tomatoes.

If you like Asian cuisine, make the rolls with added greens so that the base has that shade. If they come with caviar, then this ingredient will also act as a decoration. Fold the rolls as shown in the photo to create a comfortable Christmas tree.

Those with a sweet tooth can decorate the base made of polystyrene or foam rubber with candies, attaching them with toothpicks. And if your family likes to eat well, then use small sausages, slices of sausage, tomatoes and lettuce on the base. You can also add other edible ingredients here, thereby delighting those who love a hearty meal.

Gourmets will surely love the horizontal Christmas tree made from tomatoes and different varieties cheese - a great opportunity and reason to try them.

If you like a candy tree, attach them to a plastic bottle with tape. And if you don’t know what to give an adult as a New Year’s gift, then use a bottle of champagne as a base, decorating it in this way. Give this present.

If you like to bake, make gingerbread or shortbread dough, roll it out, cut out stars using special notches or just a knife. All that remains is to decorate the baked sweets with white icing and place them on top of each other.

On the New Year's table, even pizza will create the right mood. To do this, when rolling out the dough, cut out a Christmas tree from it, decorate with cherry tomatoes, olives and slices of smoked sausage or chicken pieces. Sprinkle your masterpiece with a little cheese and bake in the oven.

1. Christmas tree made from plastic bottles

Prepare a Christmas tree like this green plastic bottle, scotch, scissors(such that they can easily cut a plastic bottle, Whatman tube. The only thing you can add to such a Christmas tree is to decorate it with beads, gluing them to the Christmas tree with glue. You can hang a rain ribbon. You can make this craft with your children. Next, we do everything as in the photo:

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

You can decorate the top of our New Year's tree with a homemade Christmas tree toy or complete the tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

2. For Christmas trees made from plastic bottles You will need green bottles of various sizes and a wooden stick with a diameter slightly smaller than the neck. The length of the stick will determine the height of the tree and the number of bottles.

I guess it's ready)

4. Another very interesting option

For production we will need:

• scissors
• green bottle
• cork plug
• round glass of cottage cheese dessert
• candle
• glue.

Also find foam rubber. We cut a piece of a kitchen sponge for washing dishes.

First, cut the green bottle into squares or circles of different sizes. For the bottom of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the top of the head 2-3 cm is enough.

Now, using scissors, we densely break through the edges of the stars. You can call your household for help. In fact, the work is painstaking and requires a lot of patience. Edging the edges takes approximately 30 minutes. To make the spruce paws look more natural, we bring the plastic to the flame of a candle. The tips of our coniferous branches will gracefully curl down. Here is the finished result.

It's time to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we lubricate the largest spruce paw with glue, and put a cube of foam rubber on top. Add glue again and cover it with green plastic.

We continue working until we run out of parts. Don’t forget that we are “building a pyramid”, and therefore with each subsequent gluing we focus on the size of the plastic star.

All that remains is to design the trunk of the coniferous tree. Of course, its role will be played by a cork plug. However, to make the craft resistant to tipping over, we will place a small yellow bucket in the tree. Let's cut it out of a round cup.

Lubricate the bottom of the bucket with glue and place a cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result was a slender emerald Christmas tree made from plastic bottles. A real forest beauty.

Bottom line

5. By the way, the Christmas tree also looks quite creative with larger “branches”
We cut the bottle into 3 parts. Only make cuts in a circle towards the center, straight.

A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.

The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.
The Christmas tree is ready

Useful tips

To become the owner of a Christmas tree,you don't have to buy it- you just have to look into useful tips and find out how you can do itbeautiful Christmas tree with your own hands.

Today you can findmany Christmas treesin shops and on the street.

You can put it in the house a natural Christmas tree or branches from a Christmas tree for scent, but you can decorate a house or a gift for a loved one if you know a few interesting tricks.

On our website you will also find:

• 20 small DIY Christmas trees that will decorate any home
  
• How to make a Christmas tree from pine cones
• How to make a Christmas tree

Find out how to make a Christmas tree frompaper, food, fabric and even pasta.

Make a craft like this not difficult at all, and your home will be decorated with unique decor, and friends and acquaintances will be happy to receive a Christmas tree made by you as a present.

DIY paper Christmas tree. Christmas tree made from scraps of magazine pages.

You will need:

Unnecessary magazine or book with bright drawings

Cardboard or thick sheet of paper

Glue gun or PVA glue

Shaped hole punch, optional

Pencil or pen

1. Make a cone out of a thick sheet of paper and secure it with glue.

2. Prepare pages from a magazine with bright pictures and cut out many circles of the same diameter from them. If you have a shaped hole punch (shaped like a flower or a large circle) it will be easier.

3. Wrap the cut circles around a pencil so that they curl a little.

4. Starting from the bottom of the cone, begin gluing the folded circles.

Make neat rows. The circles should be tightly glued to each other so that the cardboard is not visible.

5. Make a small cone from one circle and glue it to the top of the cardboard cone.

The Christmas tree is ready!

DIY Christmas tree made from pine cones and dried citrus fruits

DIY Christmas tree (master class). Christmas trees made of wrapping paper.

You will need:

Large thick sheet of paper

Wrapping

Double tape

Scissors

Decorations

1. Make a cone out of a sheet of thick paper.

* If your wrapping paper is quite thick, you can bypass step 1 and make a cone out of wrapping paper.

1.1 Fold the paper diagonally, holding one end to keep it sharp.

1.2 Secure the paper rolled into a cone with tape. You don't need to do everything too carefully, since you will cover the cone with wrapping paper.

1.3 Trim off the excess at the bottom of the cone to create a smooth base.

2. Prepare colorful wrapping paper and cover the cone with it. To do this, place the paper on a flat surface with the pattern facing down.

2.1 Using tape, attach the end of the construction paper to the top of the cone.

2.2 Begin to slowly twist the cone while wrapping it in the wrapping paper. You need to wrap the cone tightly.

2.3 Measure the paper and cut it before completely wrapping it around the cone. Glue double tape to the edges and connect to the other end. You need to cut off the excess at the base so that the paper is even.

3. All that remains is to decorate the Christmas tree as desired. You can make paper stars, use glitter, stickers, glue on beads and/or buttons, wrap with ribbon, etc.

Similar Christmas trees:

DIY fabric Christmas tree. How to make a Christmas tree from felt.

You will need:

Glue or double tape

Scissors

* Try using two colors of felt to make the Christmas tree even more beautiful. IN in this example yellow and orange felt was used.

1. Make a cone out of cardboard. Secure the ends with glue or double tape.

2. Prepare felt and cut circles of different diameters from it, from small to large (see picture). You can use pre-prepared circle templates made from cardboard.

3. Glue Christmas tinsel to the bottom of the cone.

4. Now you need to make a crosswise cut in the center of each circle cut out of felt. Do not cut too much to prevent the felt garment from falling off. Make the cut just enough to fit the circle tightly onto the cone.

5. Start gradually putting circles on the cone. If you are using two colors, then put on the circles sequentially, first one color, then the other. Also worth noting. What to put on the next circle is not only on the cone, but also on top of the tips of the cuts of the previous circle.

6. We decorate the top of the Christmas tree. To do this, simply add tinsel, onto which you will need to add a pre-prepared small felt cone. Secure the tinsel and crown with glue.

* If you wish, you can hide a sweet gift inside the cone.

Original DIY Christmas trees. Glowing Christmas tree.

You will need:

Floral mesh (preferably several shades of green)

Scissors

Cardboard for cone

PVA glue

Cellophane

Pins

Garland

Floral wire

Decorations upon request

1. Make a cone out of cardboard.

2. Wrap the cone in cellophane.

3. Take any container and make a solution of PVA glue and a small amount of water in it

3. Prepare a floral mesh. Cut it into small pieces and place each one in a container with the solution.

4. Start gluing the pieces onto the cellophane-covered cone. Glue different shades mesh sections in different directions. The joints should be coated with another layer of glue for a more durable attachment.

5. Secure the entire structure with pins and wait for the glue to dry.

6. You have now created the first layer of the Christmas tree. Now you need to make a second layer in the same style. After gluing the second layer, leave the structure to dry.

7. Now remove the Christmas tree from the cone - the glue should quickly come away from the cellophane.

8. Place a garland inside the tree, which must be secured with floral wire.

9. All that remains is to decorate the Christmas tree to your liking.

DIY Christmas trees (photo). DIY pasta tree.

You will need:

A cone made of plastic or foam (or you can make it yourself from cardboard)

PVA glue

Pasta of various shapes and sizes

Spray paint, acrylic paint or gouache

Brush.

1. Prepare a cone and paint it the desired color. Wait for the paint to dry.

*If you are using spray paint, you can skip this step.

2. Prepare the pasta. Start applying glue to each piece and gluing the pieces to the cone. Design your Christmas tree as your imagination dictates.

After applying the glue, press the piece a little and hold it so that it sticks well to the cone. It's okay if the glue is visible from under the pasta.

Continue until you have covered the cone with pasta. Wait for the glue to dry.

3. Start adding color to the pasta. In this example, acrylic paint was used. Try to paint all the parts carefully so that there are no empty spots.

* It is advisable to paint in two layers.

* If you paint it with white paint, the Christmas tree will look like a porcelain product.

Helpful advice: If you want to remove the craft, then put it in a plastic bag first, so you can immediately find the part that might have come off the cone.

We make a Christmas tree with our own hands. Bright paper Christmas tree.

You will need:

Colored cardboard or designer paper

Thick cardboard

Glue moment or glue gun (with hot glue)

1. Cut a square base for the tree from thick cardboard.

2. Insert the skewer into the cardboard and secure with glue.

3. Now you need to cut out circles of different diameters from designer paper or colored cardboard. You need to make 3 circles of the same size.

For example, you want to make 10 circles different sizes, then you will need to cut out 30 circles (3 for each size).

*If you don't feel like cutting out a lot of circles, just shorten the skewer and you'll end up with a cute mini Christmas tree.

4. Make a small hole in the center of each circle.

5. Before you start putting the circles on the skewer, lubricate the hole in the middle with glue.

6. Start placing the circles on the skewer, leaving a little space between them.

7. Cut out stars from paper and attach them with glue to the top of the tree. You can use another part for the crown and not necessarily paper.

Crafts. DIY Christmas trees made from thread.

You will need:

Thick yarn

Yarn with pile

Cone (cardboard or foam)

Pins

Decorations, to taste.

1. Make a paper cone or buy a foam cone from specialized stores.

2. Take both strands and pin their ends at the base of the cone.

3. Start wrapping the threads around the base of the cone, securing with pins approximately every 5 cm.

4. Now start moving towards the top of the cone, carefully wrapping both threads around the future tree. At this stage there is no need to attach the thread to the cone.

5. When you have reached the crown, pin the threads again by wrapping the threads around the crown several times.

6. Both yarns now need to be pulled down, also wrapping the cone in a second layer.

7. At the base of the cone, cut the threads and secure them.

You can leave the tree like this or you can also decorate it.

In this example, artificial berries were used for decoration, but you can use colorful beads, snaps, buttons, etc.

Try also making a decoration for the top of your Christmas tree. The top of the head can be decorated the way you like.

You can leave the tree like this, or you can also decorate it.

You can make just a paper hat or a star, or you can make something more complicated. If you chose the last option, then below are instructions for you.

You will need:

Flower wire

Nippers (for wire)

Sequins

PVA glue

Fine wire (calibrated wire)

1. Bend the wire into a star shape (see pictures) and cut off the excess.

2. Cover the star with glue and sprinkle glitter on it.

3. Attach a thin wire to the star, as shown in the picture:

4. Attach a star to your Christmas tree.

Creative DIY Christmas tree

If you want something original, or you simply don’t have enough space for a large Christmas tree at home, you can try making such a simple design.

It is worth noting that such a Christmas tree is suitable for any room. It can be done both at home with children and at work.

This tree can rise 1.5-2 meters and takes up almost no space in the house. In addition, it is a good background for New Year's photography.

You will need:

Foam base or matte cardboard

Scissors

Corrugated paper

Masking tape

Adhesive tape

PVA glue

Stationery knife

Marker, optional

1. Lay out foam or cardboard on a flat surface to create a large rectangle (see picture).

2. Use duct tape to connect all the parts.

*This example used black duct tape for better visibility, but white tape is better.

3. Mark the size of your future Christmas tree using masking tape.

4. Using a utility knife, carefully cut out the shape of the future tree.

5. Prepare corrugated paper, fold it in half and cut the fringe. You should have many sheets of fringed paper to cover the entire tree.

6. Begin carefully gluing the corrugated paper to the foam, starting at the base of the tree. The fringe should hang slightly below the base to cover the foam (or cardboard), and also slightly cover the top of the tree trunk, which we will make later.

7. Work your way up to the top, covering the entire tree with a bright green coat of crepe paper.

8. WITH reverse side Christmas tree, add a hook so that the tree can be hung. Instead of a hook, you can use double tape to cover the perimeter of the tree.

The lush and fragrant beauty of the Christmas tree spent the New Year holidays with many generations of the 19th and 20th centuries. At that time, every family that sacredly respected folk traditions considered it obligatory to be present at all winter celebrations. Some 10-15 years ago, people were desperately trying to push large Christmas trees into their small “Khrushchev” and “Stalin” buildings. But time passed quickly, and at the same time the attitude changed modern man to a living but already cut down tree. Now the majority of the Russian population has abandoned the merciless destruction of coniferous forests, replacing the eternal guest with its own artificial analogue or beautiful crafts “Christmas trees” made of paper and cardboard, plastic bottles and cotton pads, threads and beads, pine cones and balls. Today even children are at school and kindergarten they know what and how to make a Christmas tree with their own hands at home, in order to decorate the house and not encourage lumberjacks. What can we say about adults! Interesting step by step instructions And step-by-step master classes with photos and videos, everyone will be helped to get the most extraordinary and at the same time very beautiful holiday tree — christmas tree.

How to make a small Christmas tree from paper and cardboard for the kindergarten with your own hands at home

December is the most exciting and emotional month. After all, it is at this time that we try to do the maximum number of things: complete the repairs we have started, carry out general cleaning, pay off debts, decorate the house with your own hands, buy gifts and, of course, help children with their little crafts “Christmas trees” made of cardboard and paper for kindergarten.

Necessary materials for a small Christmas tree made of cardboard and paper in kindergarten

• cardboard cone
• wrapping paper or glossy magazine pages
• piece of thick cardboard
• pencil
• scissors

Step-by-step instructions for making your own small Christmas tree from paper and cardboard for a child in kindergarten

1. On a piece of thick cardboard, draw a small detail in the shape of a heart or a flower petal 3 cm long. Cut out the blank; the remaining cardboard will no longer be useful.

   

2. Fold a sheet of gift paper or a glossy magazine into an accordion 3 cm wide.

   

3. Attach a cardboard template to one edge of the accordion and cut out a portion of the paper parts. Then move the template and cut out another batch of petals. Continue until you have 80 items.

   

4. Place all the received parts in piles of 5-8 pieces. Using a thin ballpoint pen, curl them with the print inward.

   

5. Place the cardboard cone on a flat surface. Starting from the bottom edge, paste over the future Christmas tree. Attach the parts by slightly overlapping them.

   

6. When the first row of petals is glued, proceed to the second. Apply each subsequent layer lightly to the previous one, forming a characteristic Christmas tree structure.

   

7. As a final step, wrap one piece in a contrasting color around the tip of the top. It’s so quick and easy to make a small Christmas tree out of paper and cardboard for your kindergarten with your own hands at home.

   

What to make a Christmas tree from for crafts for the New Year 2018 in kindergarten: another option for children

When paper and cardboard are already used, a logical question arises: what to use to make the next version of the children’s craft “Christmas tree” for the New Year 2018 in kindergarten. But even here, simple materials at hand come to the aid of mothers. Not always New Year's, but traditionally simple and accessible.

Necessary materials for another version of the Christmas tree for the New Year 2018 in kindergarten

• wooden thread spools
• wooden ice cream sticks
• acrylic paints
• excelsior
• glue gun
• scissors
• decorative stars
• PVA glue

Step-by-step master class on making a New Year's craft in the form of a Christmas tree for a child in kindergarten

1. To begin, fold the Christmas tree schematically. Place one ice cream stick on work surface vertically, and place 5 more sticks on top perpendicular to the first.

   

2. The figure should visually resemble the trunk of a Christmas tree with straight branches. Using strong scissors, trim the ends of the sticks. to give the tree crown a triangular silhouette.

   

3. When all the parts are prepared, assemble the “branches” and carefully paint them acrylic paint V bright color. Let the sticks dry.

   

4. Then lubricate the stick-trunk with hot silicone and secure all the branches in place. As in the previous step, wait for the glue to dry.

   

5. Place the thread spool on its end. Glue the Christmas tree to the other end, having first made a straight cut at the end of the trunk. Do not skimp on silicone; the part must be firmly fixed.

   

6. Decorate the junction of the stand and the tree with thin wood shavings. It can also be attached using a glue gun.

   

7. Place the almost finished craft horizontally. In a separate bowl, mix PVA with white acrylic paint. Leave small droplets of the resulting mixture on the spruce branches.

   

8. Glue a small shiny star on the top of the tree. Using this master class, make a few more Christmas trees different colors and sizes.

   

9. The bright holiday decoration is completely ready. Now you know what to make a Christmas tree from for crafts for the New Year 2018 in kindergarten: another option for children has been added to your collection of ideas.

   

How to make a Christmas tree from bells for school with your own hands at home

Excessive glitter, tinsel and golden trim look too pretentious. But not on New Year's Day. During the magical period winter holidays Sparklers, garland bulbs, and all thematic decorations made from scrap materials should flicker. We invite you to make a Christmas tree from bells for school with your own hands at home using the following master class. The finished craft will definitely amaze all viewers with its extraordinary sparkling appearance.

Necessary materials for a Christmas tree made of bells for school

• foam cone base
• thin strong wire
• golden bells
• silver bells

Step-by-step instructions for creating a Christmas tree from bells at home for the New Year 2018 at school

How to make a Christmas tree with your own hands at home for a school competition: master class with photos

Having at least basic skills in using a sewing machine and the following master class with photos, you can make a delightful Christmas tree at home with your own hands for a school competition. Enough to collect necessary materials and get down to business with a creative spirit.

Necessary materials for a DIY Christmas tree for a school competition

• foam base cones
• grosgrain ribbon (olive with polka dots)
• satin ribbon (light green)
• wooden coasters
• decorative stars
• glue gun
• scissors
• sewing machine

Step-by-step master class on making a bright Christmas tree at home for a competition at school

How to make a Christmas tree from plastic bottles with your own hands: step-by-step video instructions

You can create a festive atmosphere in your home without expensive decorations or luxurious decorations. You can make a small Christmas tree with your own hands from plastic bottles according to our step-by-step instructions with video. This stylish craft will definitely appeal to connoisseurs of arts and crafts and unusual things in the interior.

Watch how to make a Christmas tree from plastic bottles with your own hands in step-by-step video instructions:

How to make a Christmas tree with your own hands at home from threads and fabric

Laconic crafts with meaning are Christmas trees made from parchment paper, old sheets of music, book pages, jute cords or burlap, as in our next master class. In a light, restrained and not saturated with details interior, they will look amazingly appropriate and very relevant. How to make a Christmas tree with your own hands at home from threads and fabric, see below.

Necessary materials for a Christmas tree made of fabric and thread at home

• cardboard cone (homemade or purchased)
• thick burlap
• jute cord
• star
• scissors
• quick fix adhesive

Step-by-step instructions on how to make a Christmas tree from fabric and threads with your own hands

1. If you are using pre-made burlap tape, simply measure one span across the bottom of the cone and cut the resulting piece. If you use canvas, first cut it into strips 4-5 cm wide.

   

2. Fold the resulting piece for the first tier of the tree in half (into a narrower strip) and glue the ends with glue.

   

3. Wrap the resulting burlap tube around the cone and secure with a glue gun. Place the strips with the glued edge facing up.

   

4. Prepare the second, third and subsequent tiers of the tree in the same way.

   

5. Cover the cone blank to the very top. Set the craft aside so that all the parts dry thoroughly.

   

6. Using sharp scissors, make small cuts in a circle on each layer of fabric. Leave 3-4 cm between cuts.

   

7. If you have a small decorative star, use it to decorate the top of the tree. If you don’t have one, make your own from silver foil according to one of the master classes from the Internet.

   

8. Decorate the finished fabric Christmas tree with your own hands with small jute bows or small balls of thread.

   Watch how to make a Christmas tree from cotton pads with your own hands at home, in a master class with video:

   How to make a DIY Christmas tree pendant from tinsel and cinnamon sticks

   Lifelessness is the main and most significant drawback of an artificial Christmas tree. After all, in essence, it is just a decoration that evokes thoughts about living nature. Such a tree is unlikely to please rich aroma the smell of pine needles or the subtle crackle of pine cones. But we will still try to make every effort so that the following crafts will surprise you with both their colorful appearance and pleasant spicy aroma. Learn how to make your own Christmas tree pendant from tinsel and cinnamon sticks in the next master class.

   Necessary materials for DIY Christmas tree pendants made of tinsel and cinnamon sticks

   • cinnamon sticks
   • green tinsel "Christmas tree"
   • colored buttons
   • jute cord
   • scissors
   • Super glue

   Step-by-step instructions on how to make a small DIY Christmas tree pendant from cinnamon and tinsel

   
   

   How to make a Christmas tree with your own hands from available home decor products

   Well, here it is - the brightest and most fabulous time New Year's holidays, which we expected with bated breath and trembling in our souls. Some have already completed decorating their home, while others still have to choose for themselves best idea thematic design home premises. If you belong to the second group, we hasten to offer you another option for unusual decoration that can enhance the comfort and fabulous atmosphere through fragrant wood and warm light. We'll tell you further how to make a Christmas tree with your own hands from available home decor products.

   Necessary materials for home decor - Christmas trees made from boards and garlands with your own hands

   • boards 1 cm thick and 10 cm wide
   • garland for 50 lights
   • primer
   • paint in discreet symbolic colors (red, green, white)
   • paint brushes
   • tulle ribbon

   Step-by-step master class on creating a Christmas tree from scrap materials for decorating your home interior

   
   

   How to make a decorative Christmas tree for the New Year 2018 with your own hands: a master class with a video on making crafts from pine cones

   Many options for a homemade holiday tree are left behind. What else can you use to make a decorative Christmas tree for the New Year 2018 with your own hands? Of course, from the big shots in our latest master class with video! The finished tree will have inimitable view, breathtaking. And the wonderful forest aroma exuded by natural cones will give you a lot of pleasure and the feeling of the presence of a living spruce in the house.

   See how to make a decorative Christmas tree for the New Year 2018 with your own hands in a master class with a video on making crafts from pine cones:

   Decorating your home with an artificial Christmas tree is becoming more and more popular every year. Visually, Christmas trees made from scrap materials (cardboard, paper, pine cones, threads, plastic bottles, cotton pads, ribbons and balls) although not similar to the original, are quite superior to it in originality and creativity. Making such crafts yourself at home is not at all difficult, having in stock our instructions and step-by-step master classes with photos and videos. Choose the most suitable ones to determine for yourself what and how to make a Christmas tree with your own hands to suit every taste.