Beautiful cottages with a garage for 2 cars. Attached garage with internal entrance. One-story house with attached garage

In recent years, cottages are increasingly being built with large garages for 2 cars. This is due to the fact that modern life is very dynamic, and for comfortable living in the suburbs, every adult family member needs a personal car. In this article we will talk about the advantages of a house with a garage for 2 cars, the features of its design, possible options layouts.

Benefits of an attached 2-car garage

The garage can be detached or attached. The second option has certain advantages:

    saving materials for construction;

    economical summary communications;

    more rational distribution space on the site;

    increased convenience in operation;

    opportunity to do internal entrance from the car room to the house.

Less required for an extension wall material, since one, and in some cases two of its walls will be adjacent to the house. Communication lines are connected directly from the house. They do not need to be pulled across the entire site as when arranging a separate structure.

From the attached garage, you can enter the house by walking under a single canopy. This is especially appreciated in bad weather. But if you make an internal entrance, you don’t have to go outside at all. It is worth noting that a garage with an internal entrance becomes a very convenient storage for equipment, conservation, rarely used household appliances, etc.

It is also important to note that an attached car house will always be warm enough even without heating, since its walls are adjacent to the walls of a heated residential building. However, when building an extension for a car, you need Special attention pay attention to her safety. The garage must be well insulated from residential premises in accordance with all fire safety rules.

A double extension will not require much more money during construction. Even if a family has only one car at the time of building a house, it is better to immediately have two car seats - with prospects for the future.

On our website you can get acquainted with the most popular ones from construction companies presented at the exhibition of houses “Low-Rise Country”.

Design

When designing a garage, many rules are taken into account. It must have certain dimensions. The size of the room is calculated so that the car in it is located at a distance of at least 20 cm from the entrance gate, 50 cm from the front wall, 70 cm from the side walls and the neighboring car. A professional house plan with a 2-car garage must be drawn up taking into account all existing regulations.

Sometimes homeowners decide to build a car room with a wide, double-wide gate. This option is more economical. In addition, a garage with only one gate turns out to be more laconic and modern in design.

It is necessary to calculate a high-quality ventilation system at the design stage. It is needed to remove all fumes from flammable substances. In addition, without proper ventilation of the indoor air, high humidity, and it is harmful to everything made of metal.

The architectural design of a cottage with a garage can be created individually. But you can buy it already finished project modern house with a garage for two cars. In this case, it is important to take into account the relative position of the entrance from the roadway to the site and the entrance to the garage. The distance between them should be minimal.

When designing a car extension with an internal entrance, you need to consider a protective buffer zone. This could be a small corridor, a vestibule or a walk-through storage room. Such a room will prevent the penetration of unpleasant car odors into the residential part of the building.

Video description

In the following video, see the description of the project of a house with a garage:

Built-in or attached

A garage can be a structural part of a building or an extension to it. Built-in garages are usually designed in architecturally complex cottages. They are an integral part of the house and therefore easier to arrange. But an attached one, standing under a separate roof, is safer for residential premises.

The extension garage does not have to be built right away. It can be attached to an already finished building at any convenient time. So, if future homeowners are on a tight budget, they can build just the house first and leave space next to it for an extension. You can temporarily install a canopy at this location.

Project options

There are many options architectural solution garage extension. Let's look at the most successful and common of them.

Video description

Projects of houses with garages for 2 cars

Attached garage with internal entrance

In this embodiment, the garage has an internal connection with the residential part of the house. It is separated by a small technical room that serves as a boiler room. Such a project two-story house with a garage for 2 cars and is universal. The car room has optimal parameters, it has windows for daylight. The internal entrance leads through the boiler room into the hallway, where a compact storage room is located. This is very convenient when unloading food purchased for the family.

Garage with utility room

The garage extension can be expanded to include a utility room. In this project, the utility block is used as a boiler room. At the same time, it is the second exit leading to the backyard. The location of the utility block proposed here implies that it will be possible to store garden tools in it. On the side of the living quarters, the garage is separated by an entrance vestibule, which simultaneously protects the house from the penetration of wind and street dust. In addition, the entrance vestibule serves as a hallway with a built-in wardrobe for outerwear.

Garage with two outbuildings

This development presents the option of an extension, which is enlarged by two additional technical rooms. Dividing the utility unit into 2 isolated compartments is convenient because each of these compartments can have its own purpose. For example, you can store food supplies in one part, and tools in the second.

When considering this project, you should pay attention to the fact that its internal entrance leads directly to the staircase hall, which, in turn, is in no way separated from the guest area. This means that the house does not have a buffer zone. The layout of a house with a garage for 2 cars without a buffer zone obliges the owners to pay even more attention to safety. Its finishing materials must be selected even more carefully, in ventilation system must be as efficient and reliable as possible.

House with garage for a narrow plot

When building on non-standard sites, it is necessary to use extraordinary architectural moves. So, for example, here we see an example of how you can design a house with a double garage that can easily fit on a small or simply narrow plot. Important nuance– the car extension with such a layout will be the central, most noticeable element of the building, so it is necessary to think carefully about it decorative cladding. But it's not a problem - modern materials and technology allows even an ordinary car extension to be decorated very stylishly and aesthetically.

One-story house with attached garage

Project of a house with a garage with a wide canopy over the gate and a walk-through utility block. In the utility room, the doors are located so that there is maximum space left for placing racks and shelves. Here you need to pay attention to the fact that there are no windows in the car room, and it can only be illuminated with the help of artificial lighting. But there is a window in the utility room.

There is a significant difference between designing two-story and one-story cottages with garages. In the first case, sleeping quarters are usually located on the second floor, and thus they are as far as possible from the car room. But in one-story houses with a garage for 2 cars, the issue of safe relative position of the car house and bedrooms is resolved differently. On in this example you can see that the internal entrance to the house leads to the vestibule, and from it to the guest area. The bedrooms are located in the opposite wing of the building. They are combined into a sleeping block, closed by a door.

House with attic garage

Usually the garage is covered pitched roof. But there are also projects in which the space above it is also used. So, in this version the extension has gable roof, under which there is an attic room. It can become a gym, workshop, office or other room for any purpose except a bedroom and a nursery. Naturally, when arranging it, you need to think carefully about the insulation of the interfloor ceiling.

House with a terrace over a garage

To ensure that the space above the garage is not wasted, you can use it to create an open terrace. Featured below two-storey house with a two-car garage, designed with a spacious square terrace, which can be accessed through one of the second floor bedrooms.

Conclusion

A garage for 2 cars is more convenient and practical than a single garage. Modern cottages designed to accommodate large families, they are built with large car extensions. A double garage can be equipped with a functional utility room and an internal entrance to the house. In addition, its roof can become the basis for a terrace or an additional room on the second floor.

A house with an attic allows you to effectively use a small area of ​​the site. In addition to rationality, the attic is decorated with private Vacation home. Quite often on attic floor there are bedrooms and recreation areas.

The lower floor can be redesigned in such a way that a garage for a car, or even two, can be placed on the same foundation as the house.

The advantage of a garage combined with a house is that:

  • the car is in a warmer room because at least one of its walls is adjacent to the house;
  • it is more convenient to bring/take things out of the car;
  • there is additional space for storing the accessories the car owner needs;
  • savings on pouring the foundation and wall materials.

The above factors indicate the demand for such layouts, therefore various house designs with an attic and a garage are offered.

You can classify projects in different ways, but they all include 3 sections

  1. architectural;
  2. Engineering;
  3. constructive.

We invite you to familiarize yourself with some of the projects.






The size of the plot for the construction of such a house.

Project of a one-story house with an attic and a garage for two cars

If there are often guests in the house, or the family owns more than one car, then projects have been developed for them one-story houses with an attic and a garage for two cars, photos of which are presented below.




Plan and dimensions land plot, and the layout of the house on it.

Material prepared for the website www.site




The proposed projects are developed taking into account all requirements and standards of construction and communications.

Naturally, each of them involves making changes in accordance with the proposals of a particular customer.

  • minor changes. May include changes to the size of windows, doors or their location. In this case, adjustments can be made to any of the proposed projects and construction can begin;
  • significant changes. They concern redevelopment, type of flooring, height of premises. Here the project will act as a guide. If you do this yourself, you will need to familiarize yourself with additional regulatory literature that regulates certain decisions;
  • significant changes. They affect the transfer of load-bearing structures and changes in engineering solutions. This entails the development of a new project.

The projects presented on this page are examples; we do not develop or make changes to existing projects. The materials are for informational purposes only.

When designing a house with an attic and a garage, you need to study as much as possible more projects. This will make it possible to develop a detailed project, as well as take into account all the nuances, so that during the construction stage there are no hiccups or problems that will affect the operation of the building or even make its construction impossible.

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to begin construction.

The main part of the project is the architectural and design sections. If the customer is absolutely sure that the construction team will have intelligent specialists in engineering networks, then they can refuse to develop this part of the project in a specialized company. But it is necessary to understand that the architect, designer and engineer work on the project together and such aspects as, for example, grooves and openings in the walls for laying pipes and wires are provided for by them in advance.

The engineering part of the project is divided into several parts

  • Water supply and sewerage (WSC)
  1. water supply scheme
  2. sewerage diagram
  3. general form systems.

Before starting design, it is necessary to decide what kind of communication will be - individual or connected to centralized system.

Individual water supply gives complete independence from external conditions. But you must remember that you will need your own water sources, and drilling a well will cost a decent amount.

Connection to a centralized system will require the development of a project in accordance with technical specifications existing network and obtaining permission for connection.

When connecting a sewerage system to a centralized system, the procedure is the same as when connecting a water supply: submitting a request to the relevant services, developing a project, obtaining permission to tap into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

  • Heating and ventilation (HVAC)
  1. heating scheme: calculation required power equipment, distribution diagrams of heating mains, location of pipes and radiators
  2. ventilation scheme: link to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, placement of stoves and fireplaces
  3. boiler piping (if necessary)
  4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric) or connected to centralized networks.

  • Power supply (ETR)
  1. lighting wiring
  2. power network wiring
  3. ASU diagram
  4. grounding system
  5. detailed description and characteristics of all elements of the system.

Electrical systems can be divided into mandatory and optional. Mandatory items include interior and exterior lighting, ventilation, air conditioning and electric heating systems. Additional systems include systems such as “Warm floor” or automated control gate.

IMPORTANT

  • Each part of the engineering section of the project must contain general and technical descriptions, specifications of materials and necessary equipment.
  • Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.
Package "Utility networks"

Package "Utility networks"

Project utility networks will allow you to competently lay communications and make the house truly comfortable and modern.

Making changes to the project

Often the customer is faced with the question: choose standard project home and save money, while losing on the originality of your future home, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this involves additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your home looks original.

The following changes can be made to the house design:

move wall partitions. But only if they are not load-bearing. This operation will allow you to change the size and purpose of the rooms

transfer of window and doorways will allow you to change the lighting of the rooms and organize convenient access to the rooms you need

changing the type of ceilings and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with optimal height rooms are 2.8 m, some customers believe that high ceilings provide additional coziness and comfort

Converting an attic into living space will give you the opportunity to expand your own living space

It is worth changing the angle of inclination of the roof and awnings taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or ground floor

you can add, remove, change a garage or terrace, in accordance with your ideas about the functionality of your home

change in structural composition, construction and finishing materials will allow you to manage your own financial resources economically

the project in a mirror image will allow the house to organically fit into the surrounding landscape.

The changes made should not affect the safety of the home.

Too much a large number of changes, as a rule, do not improve the project. If you were unable to select from the catalogs suitable house, then maybe it’s worth ordering housing from an architect based on an individual project.

Price: from 2000 rub.

Making changes to the project

Making changes to the project

A house built according to a standard design can look original

  • Price from 500 UAH.

Package "Foundation adaptation"

When a standard house design is developed, certain average soil parameters are taken as a basis. But without accurate geological examination data, it is difficult to take into account all the nuances when designing. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally included in the project. This means that the foundation - the basis of the entire house - will need to be modified to make it strong and reliable.

To completely eliminate all problems when laying the foundation, our company’s specialists have developed the “Foundation Adaptation” package. When implementing a package, not only specifications, but also the wishes of the customer.

This package includes:

  • selection of foundation type
  • calculation of technical parameters:

Depth of laying the base of the foundation
- load bearing capacity
- indicators of soil stress under the foundation
- cross-sectional area of ​​working reinforcement, etc.

  • detailed drawings of the zero cycle
  • cost sheet for construction materials.

Adaptation of the foundation provides a complete guarantee of its strength, and therefore the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during operation. finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally included in the project. And this will help save materials and money.

Price: from 10,000 rub. - belt, plate

from 14,000 rub. - pile foundation

from 18,000 rub. - USHP (taking into account the heated floor in the slab)

Package "Foundation adaptation"

Package "Foundation adaptation"

A carefully prepared foundation project is strong and reliable home

  • Price: from 2,500 UAH.

Individual design

If you decide to build a house, then you have your own idea of ​​what your dream home should be like. And if none of the standard projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: level of comfort, family composition, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other like it.
Sometimes, however, you have to resort to individual design. For example, a developer received a plot of land with a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of working on an individual project:

  • development of technical specifications for house design
  • contract for design work
  • Preparation preliminary design: linking the building to the area, external and internal view, layouts, sections
  • detailed study of project sections.

In addition, you can also order:

  • projects for additional structures - garage, workshop, bathhouse, etc.
  • visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation consisting of architectural and structural sections.

The project features:

  • General plan of the house linking it to the boundaries of the site.
  • Floor plans, which indicate the thickness of walls, lintels and partitions, room areas, specifications of windows and doorways.
  • Facade plans indicating finishing materials and color schemes.
  • Sections of the building and main components.
  • Drawings and sections of the foundation, material consumption sheet.
  • Overlap calculation, rafter system roofs, roof insulation and waterproofing units.

You can decide on the style of your future home in the “Individual Design” catalog.

Price: from 400 rub. /

Individual design

Individual design

Realize your individuality!

  • Price: from 40 UAH per sq.m.

Plastic bag " Tender proposal"

For any developer, the question from the funny nursery rhyme "what should we build a house...?" far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate costs by eye. Without complete information, it will not be possible to calculate everything down to the smallest detail and, in the end, it will cost you more. And, in addition, a careful calculation of the cost of materials and work affects not only your finances, but also the time frame for building a house.

You can accurately calculate construction costs using the “Tender Offer” service developed by our specialists. Essentially, this is a document that provides full list all construction materials and works indicating their volumes.

Having a tender offer allows you to:

  • get a real picture of the costs of upcoming construction
  • attract a construction company that can offer the most favorable conditions for the work
  • not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
  • competently control the actions of contractors at all stages of construction

tender proposal supported by information on the cost of materials and construction work- a serious argument for obtaining credit funds from a bank.

Package "Tender proposal"

Tender proposal:

Request a detailed estimate. Build for your own benefit!

  • Price 9,500 rub.

Anti-ice package

Snowdrifts and ice in winter time on the roof of your house cause a lot of trouble. You can, of course, climb onto the roof and swing a shovel in the cold for 2-3 hours - no matter what. But they have long been invented and widely used efficient systems snow melting and anti-icing. Their basis is heating cables. The system is organized according to the same principle as a “warm floor”. Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the characteristics of the home's energy supply:

for the roof and gutters: snow melting in gutters, at the edge of the roof to prevent the formation of icicles and ice in pipes

for the entrance group: heated steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used to heat the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum energy consumption is calculated and fire safety is ensured. When creating an Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overheat shutdown device or a differential circuit breaker to automatically shut down the system when energy loss is detected. If the system turns out to be too large, it is divided into smaller sections. This makes it easier to manage its work.

Important:

For a multi-pitched roof, the specialists of our company will design the Anti-Ice system according to individual orders.

Price: 4500 rub.

Anti-ice package

Anti-ice package

Your comfort and safety in winter

  • Price 3,100 rub.

Package "Lightning protection"

Often, developers do not attach much importance to protecting their own houses from lightning: some save, some count, others hope for chance. But 3-4 years after building a house, many people remember lightning protection. The neighbor's roofing felts were all burned in a thunderstorm Appliances, then I came across statistics about how many fires due to lightning occur per year.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. This is worth thinking about, at least for purely aesthetic reasons - there will be no need to once again hammer into the walls of the house and pull the down conductor along the facade, violating the well-thought-out appearance building.

Lightning protection for a home is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal - protects the electrical network from sudden voltage surges. And special devices protect electrical equipment from sudden changes in the electromagnetic field within the radius of a lightning strike.

The Lightning Protection package includes

  • layout diagram of lightning rods that absorb direct lightning strikes
  • cross-sectional diagram of a down conductor diverting current from the lightning rod to grounding
  • diagram of a grounding loop that distributes lightning energy in the soil, ensuring complete safety
  • averaged resistance calculations
  • detailed list necessary materials
  • recommendations for project implementation.

The Lightning Protection package from Dom4M guarantees your home safety even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: think about safety in advance

  • Price 3,100 rub.

Plastic bag " Central vacuum cleaner"

"Central vacuum cleaner" is a type of aspiration system(removal of small particles by sucking them in with an air flow).

The system consists of:

  • vacuum cleaner(installed in technical room);
  • air duct system along which the dust-air mass moves (hidden installation is often carried out in the preparation of the floor or in the space behind the false ceiling);
  • pneumosockets and pneumatic scoops(the first is connected to a flexible hose with a telescopic rod and a nozzle, as in a regular vacuum cleaner, the second is intended for express cleaning, usually in the kitchen).

Pros:

  • removable dusty no air gets in back into the room, and is “thrown out” after the unit onto the street;
  • No noise in cleaned areas.
  • Ease of cleaning without “dragging” the vacuum cleaner from room to room, without using extension cords.
  • Hidden installation system, there is nothing in the room except an air outlet.

Project price: from 3100 rub.

Package "Central vacuum cleaner"

Package "Central vacuum cleaner"


"An integral part of a modern home is comfort, cleanliness and fresh air"

  • Project price: from 3,100 rubles.

Package "Comfortable Home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable
modern man V modern house. Most of these amenities are included at the design stage. But we are ready to expand their list and help clients make their own homes as comfortable as possible.

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to begin construction.

The main part of the project is the architectural and design sections. If the customer is absolutely sure that the construction team will have intelligent specialists in engineering networks, then they can refuse to develop this part of the project in a specialized company. But it is necessary to understand that the architect, designer and engineer work on the project together and such aspects as, for example, grooves and openings in the walls for laying pipes and wires are provided for by them in advance.

The engineering part of the project is divided into several parts

  • Water supply and sewerage (WSC)
  1. water supply scheme
  2. sewerage diagram
  3. general view of the system.

Before starting design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply provides complete independence from external conditions. But you must remember that you will need your own water sources, and drilling a well will cost a decent amount.

Connecting to a centralized system will require developing a project in accordance with the technical conditions of the existing network and obtaining permission to connect.

When connecting a sewerage system to a centralized system, the procedure is the same as when connecting a water supply: submitting a request to the relevant services, developing a project, obtaining permission to tap into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

  • Heating and ventilation (HVAC)
  1. heating diagram: calculation of the required equipment power, distribution diagrams of heating mains, location of pipes and radiators
  2. ventilation diagram: connection to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, placement of stoves and fireplaces
  3. boiler piping (if necessary)
  4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric) or connected to centralized networks.

  • Power supply (ETR)
  1. lighting wiring
  2. power network wiring
  3. ASU diagram
  4. grounding system
  5. detailed description and characteristics of all system elements.

Electrical systems can be divided into mandatory and optional. Mandatory items include interior and exterior lighting, ventilation, air conditioning and electric heating systems. Additional systems include systems such as “Warm floor” or automated gate control.

IMPORTANT

  • Each part of the engineering section of the project must contain general and technical descriptions, specifications of materials and necessary equipment.
  • Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.

Price: from 100 rub. per m²

Package "Utility networks"

Package "Utility networks"

The engineering network project will allow you to correctly lay communications and make the house truly comfortable and modern.

  • Price: from 100 rub. per m²

Making changes to the project

Often the customer is faced with the question: choose a standard house project and save money, while losing on the originality of the future home, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this involves additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your home looks original.

The following changes can be made to the house design:

move wall partitions. But only if they are not load-bearing. This operation will allow you to change the size and purpose of the rooms

moving window and door openings will allow you to change the lighting of the rooms and organize convenient access to the rooms you need

changing the type of ceilings and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with an optimal room height of 2.8 m, some customers believe that high ceilings provide additional coziness and comfort

Converting an attic into living space will give you the opportunity to expand your own living space

It is worth changing the angle of inclination of the roof and awnings taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or ground floor

you can add, remove, change a garage or terrace, in accordance with your ideas about the functionality of your home

changing the structural composition, construction and finishing materials will allow you to economically manage your own financial resources

the project in a mirror image will allow the house to organically fit into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the project. If you couldn’t choose a suitable house from the catalogs, then maybe it’s worth ordering housing from an architect based on an individual project.

Price: from 2000 rub.

Making changes to the project

Making changes to the project

A house built according to a standard design can look original

  • Price: from 2,000 rub.

Package "Foundation adaptation"

When a standard house design is developed, certain average soil parameters are taken as a basis. But without accurate geological examination data, it is difficult to take into account all the nuances when designing. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally included in the project. This means that the foundation - the basis of the entire house - will need to be modified to make it strong and reliable.

To completely eliminate all problems when laying the foundation, our company’s specialists have developed the “Foundation Adaptation” package. When implementing the package, not only technical characteristics are taken into account, but also the wishes of the customer.

This package includes:

  • selection of foundation type
  • calculation of technical parameters:

Depth of laying the base of the foundation
- load bearing capacity
- indicators of soil stress under the foundation
- cross-sectional area of ​​working reinforcement, etc.

  • detailed drawings of the zero cycle
  • cost sheet for construction materials.

Adaptation of the foundation provides a complete guarantee of its strength, and therefore the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of a finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally included in the project. And this will help save materials and money.

Price: 14,000 rub.

Package "Foundation adaptation"

Package "Foundation adaptation"

A carefully prepared foundation project - a strong and reliable house

  • Price 14,000 rub.

Individual design

If you decide to build a house, then you have your own idea of ​​what your dream home should be like. And if none of the standard projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: level of comfort, family composition, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other like it.
Sometimes, however, you have to resort to individual design. For example, a developer received a plot of land with a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of working on an individual project:

  • development of technical specifications for house design
  • contract for design work
  • preparation of a preliminary design: linking the building to the area, external and internal views, layouts, sections
  • detailed study of project sections.

In addition, you can also order:

  • projects for additional structures - garage, workshop, bathhouse, etc.
  • visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation consisting of architectural and structural sections.

The project features:

  • General plan of the house linking it to the boundaries of the site.
  • Floor plans, which indicate the thickness of walls, lintels and partitions, room areas, specifications of windows and doorways.
  • Facade plans indicating finishing materials and color schemes.
  • Sections of the building and main components.
  • Drawings and sections of the foundation, material consumption sheet.
  • Calculation of the ceiling, roof truss system, insulation and waterproofing components of the roof.

You can decide on the style of your future home in the “Individual Design” catalog.

Price: from 450 rub. /

Individual design

Individual design

Realize your individuality!

  • Price: from 450 rub. / m²

Package "Tender proposal"

For any developer, the question from the funny nursery rhyme "what should we build a house...?" far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate costs by eye. Without complete information, it will not be possible to calculate everything down to the smallest detail and, in the end, it will cost you more. And, in addition, a careful calculation of the cost of materials and work affects not only your finances, but also the time frame for building a house.

You can accurately calculate construction costs using the “Tender Offer” service developed by our specialists. Essentially, this is a document that provides a complete list of all construction materials and work, indicating their volumes.

Having a tender offer allows you to:

  • get a real picture of the costs of upcoming construction
  • attract a construction company that can offer the most favorable conditions for the work
  • not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
  • competently control the actions of contractors at all stages of construction

a tender proposal supported by information on the cost of materials and construction work is a serious argument for obtaining credit funds from the bank.

Package "Tender proposal"

Tender proposal:

Request a detailed estimate. Build for your own benefit!

  • Price 10,500 rub.

Anti-ice package

Snowdrifts and ice on the roof of your house in winter cause a lot of trouble. You can, of course, climb onto the roof and swing a shovel in the cold for 2-3 hours - no matter what. But effective snow melting and anti-icing systems have long been invented and widely used. Their basis is heating cables. The system is organized according to the same principle as a “warm floor”. Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the characteristics of the home's energy supply:

for the roof and gutters: snow melting in gutters, at the edge of the roof to prevent the formation of icicles and ice in pipes

for the entrance group: heated steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used to heat the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum energy consumption is calculated and fire safety is ensured. When creating an Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overheat shutdown device or a differential circuit breaker to automatically shut down the system when energy loss is detected. If the system turns out to be too large, it is divided into smaller sections. This makes it easier to manage its work.

Important:

For a multi-pitched roof, the specialists of our company will design the Anti-Ice system according to individual orders.

Price: 4500 rub.

Anti-ice package

Anti-ice package

Your comfort and safety in winter

  • Price 4,500 rub.

Package "Lightning protection"

Often, developers do not attach much importance to protecting their own houses from lightning: some save, some count, others hope for chance. But 3-4 years after building a house, many people remember lightning protection. Maybe my neighbor’s household appliances burned out in a thunderstorm, or maybe I came across statistics about how many fires happen due to lightning each year.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. This is worth thinking about, at least for purely aesthetic reasons - you won’t need to once again hammer into the walls of the house and pull the down conductor along the facade, disturbing the thoughtful appearance of the building.

Lightning protection for a home is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal lightning protection protects the electrical network from sudden voltage surges. And special devices protect electrical equipment from sudden changes in the electromagnetic field within the radius of a lightning strike.

The Lightning Protection package includes

  • layout diagram of lightning rods that absorb direct lightning strikes
  • cross-sectional diagram of a down conductor diverting current from the lightning rod to grounding
  • diagram of a grounding loop that distributes lightning energy in the soil, ensuring complete safety
  • averaged resistance calculations
  • detailed list of required materials
  • recommendations for project implementation.

The Lightning Protection package from Dom4M guarantees your home safety even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: think about safety in advance

  • Price 3,100 rub.

Package "Central vacuum cleaner"

"Central vacuum cleaner" is a type of aspiration system(removal of small particles by sucking them in with an air flow).

The system consists of:

  • vacuum cleaner(installed in the technical room);
  • air duct system along which the dust-air mass moves (hidden installation is often carried out in the preparation of the floor or in the space behind the false ceiling);
  • pneumosockets and pneumatic scoops(the first is connected to a flexible hose with a telescopic rod and a nozzle, as in a regular vacuum cleaner, the second is intended for express cleaning, usually in the kitchen).

Pros:

  • removable dusty no air gets in back into the room, and is “thrown out” after the unit onto the street;
  • No noise in cleaned areas.
  • Ease of cleaning without “dragging” the vacuum cleaner from room to room, without using extension cords.
  • Hidden installation system, there is nothing in the room except an air outlet.

Project price: from 3100 rub.

Package "Central vacuum cleaner"

Package "Central vacuum cleaner"


"An integral part of a modern home is comfort, cleanliness and fresh air"

  • Project price: from 3,100 rubles.

Package "Comfortable Home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable
modern man in a modern home. Most of these amenities are included at the design stage. But we are ready to expand their list and help clients make their own homes as comfortable as possible.