Tomatoes after tying

When the tomato bushes in the greenhouse or in the garden have grown and begun to bear fruit, the need for support arises: tying up the tomato bushes. So how to properly tie up tomatoes in a greenhouse? This procedure is valid from mid-June to mid-July. If tomato bushes are not tied up in time, they may simply break under the weight of ripening tomato fruits. As a result, this can destroy the entire tomato crop. Of course, timely and correct tying of tomatoes will ensure wonderful harvest tomato. You can check it out with your own hands.

It is worth noting that proper tying of tomatoes, like any other procedure associated with growing vegetables, has its advantages and disadvantages. The main disadvantage is that tying up tomatoes in a greenhouse may disrupt the development of the root system. After all, without support, tomato bushes must strengthen themselves independently through their root system. While tying acts as a “crutch” supporting the plant.

Naturally, such tomatoes will grow and develop beautifully. Their root system will be more powerful, since the roots will be forced to go deeper into the soil, where there is much more moisture and necessary for plants microelements. In addition, such plants are practically not afraid of short dry periods. After all, they will be able to compensate for the lack of rain with moisture located in the deep layers of the soil. However, the plants will not be able to support heavy fruits in the later stages when they begin to ripen. There are still people who know on the windowsill, and we know too!

So, how to properly tie tomatoes in a greenhouse or garden so that... The main advantage of tying is to ensure that the plants do not become deformed or break over time. Today there are varieties of tomatoes for which tying is not a whim of the gardener, but a necessity. This primarily applies to tall varieties of tomatoes. Especially those plants whose bush height is initially quite large.

Tying tomatoes

Schemes for tying tomatoes

Today there are many ways to tie tomatoes so that they do not become deformed, and you will learn how to properly tie tomatoes in a greenhouse.

Of course, there are general rules. For example, garter material. It should be relatively wide so as not to dig into the trunk of the tomatoes and not to disrupt the integrity of the plant by friction. It doesn’t matter what you tie the tomatoes with: rope or ribbons of fabric. For tying, do not use hard material, such as wire or fishing line. As a result, such material will simply cut the trunk of the plant and lead to the death of the crop. The tying material should be updated annually. Today this is not a problem, since everyone has the means at hand. For these purposes, scraps of any fabric, such as a torn sheet or old nylon tights, are perfect. Well, if you have a greenhouse, then we will tell you simply and quickly.

To properly tie tomatoes in a greenhouse, you need to have not only material for tying, but also wooden stakes, which are perfect for the role of a “crutch.” The stakes should be placed close to the bush being tied: at a distance of 10 to 15 centimeters from the trunk of the plant. Before tying up the bush, you should make sure that the pegs are holding tightly. They should be driven to a depth of 20 centimeters. If this is not done, the stakes will not be able to provide the plants with normal support. As for tall tomatoes, you can use not only wooden stakes for tying them, but also metal fittings. Indeed, in such a situation, the load on the support increases significantly.

Tying a tomato

After preparing for the process, you can begin tying up tomatoes in the greenhouse. Wrap the garter around the stem of the plant to create a loose loop. Twist the ends several times and tape them to the peg. You should not tie knots, as it will be quite difficult to remove a piece of fabric or rope from the plant. Do not tighten the loops too tightly, as this will only harm the plants. In addition, in a couple of weeks the garter will need to be re-dressed. After all, the bushes are growing and their height will increase more than once. Like these ones simple tips and recommendations on how to properly tie up tomatoes, tomatoes in a greenhouse or in a garden, but after you grow them, you can always do it yourself. Thank you and good luck to you!

How to properly tie tomatoes video

How to properly tie tomatoes

The simplest of known methods- a garter to a wooden or metal peg driven into the ground. For each bush, its own peg is driven in nearby, and the most suitable materials are used as garter material. different materials- nylon stockings, cord from household appliances, ribbons and straps. The bush is tied near the top of the stem.

Tomatoes must be tied up.

Do not use ropes for tying from last season to avoid possible infection.

Since early spring summer cottages literally come to life, people dig, loosen, plant in order to get good harvest. Any gardener wants to grow a rich harvest of tomatoes that will be the envy of all his neighbors; some succeed, while others do not. Summer residents often say that some crops love them and grow well, while others don’t like them and don’t grow at all. But the point here is different, you need to know how to care for the plants, what to feed them with, how often to water them, if you want to grow large and tasty tomatoes, then you need to know how to properly tie up the tomatoes.

Growing vegetables is a fun activity. Amateur vegetable growers place a wide variety of crops on their plots. But none of them is complete without juicy and tasty tomatoes. A variety of tomato varieties will require when growing individual approach to each of them. Low-growing species tomatoes are compact bushes that do not require special agrotechnical techniques. But is it possible to resist the temptation to grow large-fruited varieties tomatoes? They have incomparable taste qualities. But at the same time such vegetable crops will require more attention than their short relatives.
When the plant reaches the first two lower rows of trellises, very carefully thread them through them using the “darning” principle, and then, as the bush grows, weave in the side shoots. Already fruiting brushes are tied to trellises or wires using plastic clips. You can provide small hooks, the thickness of which will not damage the plant.
Important! If you prefer to reuse nylon or fabric, treat it with a solution of laundry soap before tying up the bushes. To do this, just soap the fabric or nylon and leave for an hour and a half. Then rinse and dry.
The following materials are required for the garter:

OgorodSadovod.com

How to properly tie tomatoes in open ground?

Northerner,Proper gartering of tomatoes determines how strong and resistant to weather conditions they will grow.

For what purpose should tomatoes be tied?

The advantage of this method is that garter materials can be used every year. The downside, as already mentioned, is the possible infection of plants with diseases remaining on the garter materials from last year. But there is a way out here too - disinfection of all materials before new use.

And now let’s figure out exactly how.

If you tie up even small bushes, they begin to form a powerful root system, they become stronger, and therefore larger nutrients delivered to tomatoes. The peg must be driven into the ground when planting tomatoes, approximately 10 cm from the bush, and immediately tied with a figure eight. You can also use trellises to tie tomatoes, in this case the consumption of rope will be reduced. In theory, amateur gardeners know when to plant, how to grow tomatoes, and are often even satisfied with the result of their work, but if everything is done correctly and master some tricks, then you can increase the tomato yield significantly. There are many varieties of tall tomatoes. They differ in the color and size of the fruits, which have excellent taste. However, growing them is quite a troublesome task. But it’s worth working hard to get large-fruited tomatoes. As a rule, vegetable growers grow tall tomato seedlings themselves. For its planting, the land is prepared in the fall. Tomatoes will require well-lit areas with fertile soil. The beds are planned in such a way that it is possible to carry out the necessary agrotechnical measures, the implementation of which cannot be done without gartering tomatoes. Novice amateur vegetable growers make mistakes when fixing plants.

General rules for gartering tomatoes

Important! The trellis method of supporting tomatoes makes it possible to develop side shoots, increasing the yield of each bush.

You can purchase garter attachments with a brush holder. Instead of fabric or string, wide clips with rounded edges are used for fixation, which do not cause any harm to the stems.

metal rods or wooden stakes (up to 1 meter);

A large number of fruits can break the plant.

Amber,

Methods used for gartering tomatoes

Proper gartering is not a minor activity that can be neglected, but an important event that affects the quality of the future harvest.

An important point is not to tighten the stem with garter materials, so as not to damage it and expose the plant to death. As the bush continues to grow, it is necessary to equip it with new garters or raise the old one as it grows.

In different climatic conditions, things are different. For example, in southern latitudes, where tomatoes are grown on large plantations in the bright sun, it is not advisable to tie them up. The fruits lie on the ground, and the whole plant receives much more nutrients from the ground than in the case of a garter.

Whatever amazing plants Whatever gardeners grow on their plots, they almost always make the traditional choice in favor of tomatoes. It’s so nice to grow this crop from the very seed, see how the fruits ripen and taste that very first red one right from the garden. There are low-growing, medium-growing and tall-growing tomatoes. Most often, large-fruited plants are grown in areas of our country, tall varieties who demand for themselves special care. The result is worth it, but to get it,

If everything is more or less clear with growing seedlings and planting time, then few people know how to properly tie up tomatoes.

What is the correct way to garter a tomato? Tall plants, depending on the variety, will require pinching and regular fixation of the stem. The procedure for gartering tomatoes is carried out 3 to 6 times per season. Moreover, this agrotechnical technique is performed for each plant individually.

Linear trellises are especially popular, when only one row of wire is stretched on top between two stakes at a distance of 30-40 cm. A rope is stretched from the wire to the bushes, around which the plant wraps as it grows. This method also involves pinching, since only one main stem can be developed.

The choice of method depends on the variety, volume of fruiting and number of bushes.

dressing material;

Water the bush strictly at the root, avoiding water getting on the leaves and flowers. It is almost impossible to water a bush lying on the ground like this. Polar, etc.

sadsamslabo.ru

How to properly tie tomatoes in a greenhouse

Each garden culture requires special treatment. The “sow - water - harvest” scheme works in very rare cases, and tomatoes are no exception. This crop is quite critical of the frequency and quality of watering, timely application of fertilizers, and care of tops and garter. Moreover, the last condition concerns not only obtaining the harvest, but also preserving it.

Let's complicate the garter a little by using trellises. We place them at some distance from each other and stretch a wire horizontally between them. Between the rows of wire we make a distance of 45cm. Actually, rows of bushes will be tied to these wires.

Residents of cooler regions are unlikely to think about this method of growing. Periodic rains combined with not the most high temperatures(especially at night) are capable of ruining all the efforts of summer residents with the help of late blight or some other misfortunes like rot. That is why you will definitely have to tie up tomato bushes here, even low-growing ones. It is necessary to completely eliminate contact of fruits with the ground.

Why do you need to tie up tomatoes in a greenhouse?

You will have to study the features of gartering tall tomatoes.

There are several important points here.Spring plantings of tall tomato seedlings differ from low-growing varieties. Bushes of some species can reach 1.5 meters in height. Therefore, plants are planted at a distance of 1 meter from each other. After planting the tomatoes, select material for gartering the tomatoes.

All of the above methods are quite popular among gardeners. Which one to use is up to you. In order to choose the right one, consider the growth of the plant, its optimal yield and conditions (greenhouse or open ground).
The simplest and therefore most accessible is to use separate supports (stakes) for each bush. You can use any available material, even scraps of ore and reinforcement. The only condition is that the length must exceed the final length of the bush by 20-30 cm.
Twine or wire.

Proper pinching (getting rid of side shoots) can only be done with the bush tied up and with all-round access.

Such varieties, although they are average in terms of yield, are rarely grown in greenhouses. Basically, the choice is made in favor of abundantly fruiting varieties, mainly tall ones. This is justified and advisable - on a small area of soil you can get more bountiful harvest. These varieties include:
Contents
Metal mesh can serve as a good guide for tomato bushes, only its cells should be large

Thanks to the garter, contact of fruits with the ground and their rotting are eliminated

Not all varieties of tomatoes are able to “hold themselves” during the process of growth, much less fruit development. Under the mass of filling tomatoes, the bushes begin to bend to the ground and may even break. If no injury occurs, then it is unlikely that the future harvest will benefit from lying on the ground - slugs and worms will happily feast on an unexpected gift.

It is necessary to ensure that the fruits do not come into contact with the ground;
For this you will need, first of all, twine, which must be sufficiently soft and elastic. Do not use wire or fishing line for this purpose. They can injure plants. Pegs for gartering tomatoes should be of sufficient height and quite strong. These are usually wooden or metal pegs that can be used for several seasons in a row. The material for gartering tomatoes is ready. As the plants grow, they begin to fix them. You shouldn't be late with this. Bushes that touch the ground are susceptible to diseases and, as a result, lag behind in development and bear fruit poorly. This will lead to crop loss and a decrease in the quality of vegetable products. The garter is made immediately to permanent pegs, which will serve the plant all season. Fixing a tomato bush is not difficult. A support is installed near each bush. It should be strong enough. Fixing the plant should not be rigid, and take into account the fact that as the tomatoes grow, the stem will thicken. Tomato gartering is done with soft rope or fabric ribbons. The twine is wrapped several times (in the shape of a figure eight) around the stem of the plant and the peg. After which it is fixed on a peg. A loose loop is formed between the plant and the stake, which does not interfere with the growth of the plant. As they grow, the tomatoes are re-gartered.
Remember, only medium-sized, early-ripening crops do not need a garter.
The garter method is to drive a rod into the ground at a distance of 5-8 cm from the stem and tie the bush. During the fruiting period, you will need to tie it at least 1-2 more times; accordingly, for an adult bush, additional gartering of each hand is necessary.
If we are talking about growing tomatoes on an industrial scale, it makes sense to use the so-called. trellises (see picture), which allow you to tie up several bushes simultaneously and on one plane.
Fruits lying on the ground are subject to attack by insects and pests, and are also affected by late blight.

Methods for gartering tomatoes

The third method is called linear. A wire is pulled in the middle between the stakes, then a rope is stretched to it above each tomato, one of its ends is attached to the stem of the bush.
An important condition is to exclude wires, fishing lines and thin ropes from garters for tomato bushes. For this purpose, you need to use nylon tights and stockings. But this is ideal. Various straps and powerful ropes will also work, as long as the garter really firmly but gently holds the bush without pinching the stem.
There is one more circumstance - tomatoes need to be watered at the root, and when they are in a lying position, this is impossible to do. It is undesirable to water the tops of a tomato, as well as pour water on the fruits lying on the ground. And in general, the path to the tops of the plant for any disease in this case is significantly shortened.

Even low-growing tomato bushes need to be tied up;

The trellis method of growing tall varieties of tomatoes is no less effective. To do this, a trellis is built along the row with planted seedlings. Metal stakes are installed on both sides of the row. on them on different heights secure several rows of twine. Growing plants will be securely fixed on such a trellis.

And if you decide to give up pinching, choose the trellis method of gartering.

It is also convenient to use a garter. This is a special device that allows you to wrap around the support and stem in one movement. The principle of operation is reminiscent of a stapler, where tape is used instead of a staple. The same device is also used for tying grapes and pumpkin crops.

The optimal planting is 3-5 bushes per 1 sq.m. Only if timely garter will all bushes be healthy and begin to bear fruit on time.

How to tie up tomatoes

Honey saved;

Frequent disputes arise between gardeners regarding the need to tie tomatoes. The first group believes that this process is an intervention in the natural environment and reduces the chances of the tied plant taking root and does not guarantee a good harvest. The second group insists on the need for such a procedure, since it removes the load from the fragile tomato trunk and prevents damage to the fruit. The truth, as usual, is somewhere in the middle.

The fourth method is to make each bush its own cage. The cage is made of wire or metal. We bend the circles that will be connected by rods. We plant a tomato bush, dig the cage to a depth of 15 cm and tie it with a rope.

To avoid exposing your tomatoes to the risk of infection from last year's diseases, do not use old garter material.

To avoid unpleasant moments that could negatively affect the final result of all your work,

Making trellises

For tying, you cannot use wire, fishing line or thin ropes; it is better to cut old nylon tights, of which every woman has plenty;

The procedure for gartering tomatoes is a crucial moment when growing tomatoes, which should not be ignored. Caring vegetable growers use it not only for tall varieties. Low growing tomatoes With this method of cultivation, people get sick less and produce excellent harvests.

A garter is required to “hold” fragile plants and prevent them from breaking off during the growth period, as well as during fruiting.

For the garter you will need:

Long beams (sticks, small pipes, thick slats, etc.);
Short glazing beads (metal scraps);
Wire;
Leg-split;
Hammer.

We find a bed with tomatoes. Along the edges, we hammer one long beam into the ground with a hammer. It must be strong and stable, as it will support the weight of all the plants in the row and their fruits. Between these two beams we screw a wire along the entire length of the tomato row. We tighten it so that the wire does not hang down. Cut the twine into pieces equal to the length from the ground to the wire plus 20 cm (for tying). Gardeners recommend using twine, folded in half, to securely secure the plant. To avoid “pulling” the plant, use short glazing beads. We tie one end of a thread to each short glazing bead and stick it next to each tomato. We tie the free end of the twine to the wire with a slight stretch.

Carefully take the plant and wrap the tied twine around it. At the top of the head we bifurcate the threads and secure the shoot between them.

Growing tomatoes has its own peculiarities. It’s unlikely to just plant seeds and wait for the tomatoes to grow. good idea. They are very demanding in their care. One of the rules is to garter tomatoes, but not all varieties need gartering of tomatoes. Most often, tall varieties are grown this way. You should know how to properly tie tomatoes and which tomato pegs to choose. After all, for short and tall tomatoes you need completely different pegs. So let's figure out how to tie up tomatoes.

To prevent excessive growth of tomatoes, shoots should be removed from time to time. You can also often find ovaries and fruits on them, but they hardly have time to ripen; they suck out more juice from the tomatoes than necessary. And it is more convenient to plant a tomato that is tied up, rather than one that is practically lying on the ground.

Tall tomatoes may not be able to withstand the weight of the fruit and simply break. Fruit tying is vital, otherwise they can easily be attacked by pests. Also, unplanted tomatoes are much more likely to develop late blight. Tomatoes hate water on their leaves - you need to water the plant carefully. However, this is almost impossible when it is lying on the ground.

Bad weather will not break your tomato if it is attached. Excessive moisture in the soil will not harm the tomatoes if they are tied up. But if they are in free flight, then most likely they will rot.

As you may have noticed, without a garter you can forget about tomatoes, no matter how powerful the roots are. And it will be easier and easier for you to care for your tomatoes.

Video “How to tie up tomatoes”

From this video you will learn how to correctly perform this strategically important act for a good harvest.

Methods

You can tie up tomatoes the way you want. All methods are good in their own way. And the materials themselves are the same.

We will need stakes or metal rods, twine and bandaging material, which must be strong and wide. Line and thread are not the same! They will crash and eventually the bush will die!

It is best to use pieces of fabric. These could be T-shirts, blankets, pillowcases, etc. Some people like to use old tights - this is also an option, since they will not rot during the season. But remember that they will need to be disinfected in boiling water or laundry soap to protect the tomatoes themselves.

You can also now find various reusable plastic things both for tying and for supporting tassels with fruits. They are cheap so you can buy them. If you are growing for sale and you have a huge amount of tomatoes, then buy a garter. This is a special device, something like a vegetable stapler. It is very popular among those who grow grapes. Therefore, if you have a friend who is a winemaker, then he is guaranteed to have this thing that will make your life a hundred times easier!

Pros of a garter:

Vegetables do not spoil because they are all raised high above the ground.
Air circulates freely between the bushes.
Watering your tomatoes will become much easier.
You can easily carry out pinching.
The tomatoes will begin to bear fruit better and suffer less.

Stakes

Most easy way– use pegs for each tomato. This can be either reinforcement or a wooden lath. Their length must be half a meter greater than the final growth of the plant. After all, that’s how hard they drive the pegs. However, if you have tall tomatoes, then use longer stakes - up to 2.5-3 m in length. When installing the pegs, step back from the stems by about 15 cm so that the roots are not accidentally damaged.

After you have installed the pegs, the trunk of the plant is treated with a garter, its ends are crossed in a figure of eight or simply crossed and tied to the pegs. Just don't overdo it with the tightness! The same is done with huge brushes so that they do not break due to the weight of the fruit.

Remember that this method will only work medium-growing varieties, if the tomato is heavy, then the support may break and collapse along with the tomato.

The main disadvantage of this method is that you will need to repeat this procedure a couple of times a season.

On the trellis

If you have a tomato plantation because you have a large family or you grow tomatoes for sale, then this method will suit you.

Long spears are driven into the ground; on average, their length can reach 3 m. A wire is pulled between them in half-meter increments. As they grow, the stems and branches of tomatoes are tucked into the wire from different sides. From the outside it all looks like wickerwork. Remember that the rope cannot be tightened too much, otherwise the tomatoes will quickly die. If you have a large bed, you can drive in intermediate stakes to make the trellis stable.

The good thing is that you can leave a couple of stepsons on tomatoes to increase the yield. This can be done in hot greenhouses, where tomatoes can grow in autumn and winter.

Another subtype of such a garter is linear. In this case, the wire is pulled between the pegs not only over but also over each tomato. You will not need to think about how to tie them up, you will only need to entwine them as the tomato grows.

Cells

The checkered method is similar to the trellis method. Prepare pieces of iron and wire to replace the trellis and then install the structure in the same way. If you don’t have them, you can build the same one wooden frame. It will look like a high chair without a seat or back. If you make the structure quite wide, it will easily cover 4 bushes - one for each “leg”.

Hello, dear friends! Many gardeners lose a significant part of their tomato harvest due to improper gartering. The stems are pulled, the brushes are broken; the result is a malnutrition, the fruits are not filled. It is especially scary at the very peak of fruiting to find a mass of bushes collapsed to the ground with broken shoots. It is impossible to get out of such a situation without losses.

Some owners believe that it is better to grow super-low varieties, doing without a garter at all. Of course it's not very good option– and the tomatoes are not the largest, and the return from the area is not encouraging. Therefore, we will plant the desired varieties and give them reliable support.

The issue must be approached with all seriousness, since tying tomatoes correctly is a special art, everything must be thought out in advance. From a variety of methods, we choose the one suitable for specific conditions.

Tomatoes tall and short

What tomatoes can be grown without any supports at all? The most correct answer: none! Any bushes bend to the ground under the weight of the harvest. But life situations are different.

If for some reason (health status, long absence etc.) there is no way to care for plants at all, you should choose several super-determinate varieties for planting - with limited, especially low growth, not large fruits and bush.

The standard variety has a strong, strong, thick trunk, which holds the plant in an upright position throughout the season. Combination with mulching is welcome.

All other varieties require regular attention. The most reliable fastenings naturally needed by tall tomatoes.

Before buying seeds, think: can you provide them with a decent setting?

Stages of work

We think through the scheme in advance and select materials.
We install supports.
We carry out the first (main) garter (usually soon after).
We regularly inspect the plants for additional support.

Meaning of garter

Stem fractures and malnutrition are prevented.
Lighting and ventilation improves, there is no excess dampness.
The risk of developing rot and other infections is reduced.
It is easier to get close to the plantings, extend hoses for watering, etc.
The bush is better visible. It makes it easier to monitor the condition of the plant and care for it (spraying, harvesting).
The fruits are not contaminated.

Garter materials

To attach tomato plants to supports, do not use wire, fishing line or ropes that are too thin. These materials can pull delicate tissues too tightly, disrupting nutrition, and even cut or break fragile stems. So what to tie it with?

It is better to use thick soft twine (natural or polypropylene), strips of fabric 2-3 cm wide (you can tear unnecessary linen), old nylon tights, and other improvised means (they should not be too shabby to withstand the load). If last year's material is used, it must be disinfected with boiling water or fungicides.

Supporting slingshot sticks are sometimes placed under low-lying large clusters of tomatoes.
In gardening stores you can buy special plastic fastening clips. There are also special devices on sale - garters (filled with a special tape and working on the principle of a stapler), but they are by no means cheap.

Fastening principles

The stems and brushes are tied to the supports not too tightly, without squeezing the plant tissue. It is also important to remember that as the tree grows, the trunk thickens. The loop with the knot is not made at the very top, but always under the sheet (to prevent slipping).

Sometimes a gentle figure-eight fastening is performed.If tight knots are tied, then new ropes are used to re-garter. If you make a bow knot, it can be easily removed and moved later.

Types of supports

Agricultural technologists and folk craftsmen have developed a wide variety of supports for growing tomatoes, as evidenced by numerous photos in magazines and the Internet.There are three main types of such structures:

Individual mounts

Each tomato bush can be equipped with a personal support. Most often, strong pegs made of wood, metal or durable plastic are used for these purposes. For stability, they must be stuck into the ground to a depth of more than 20 centimeters. The peg is installed in such a way as not to damage the underground part of the planted plant.

When reused, the supports are disinfected. Wooden and iron pegs are stored in winter, protected from dampness, and plastic ones - from low temperatures.

As a rule, supports in the form of individual pegs are used in open ground - on a street bed or tomato “field”.

There are also original, slightly exotic personal mounts - in the form of cages or huts.

Classic trellis

To support and facilitate the formation of tall, liana-shaped bushes with large fruits, it is advantageous to build especially strong structures. They are installed both on the street ridge and in open greenhouse, and in the greenhouse.

Along the edges of the bed, two powerful stakes are driven into the ground ( metal pipes and so on.). Several strong thick ropes or wires are pulled between these stakes; sometimes a plastic or rope mesh is used instead, less often a metal mesh with large cells is used.

Tomatoes are planted on one side along the trellis. Shoots and fruit clusters are tied as they grow, spread out on a support.

Such trellises for open ground can be portable, with supports similar to a children's swing (two-legged on each side, in the shape of the letter A). In this case, the support wires can be positioned vertically, attached to additional horizontal pipes located above and below. There are many options.

Linear trellis

This is very common economical type, suitable for both open and protected ground. An individual rope is tied to each bush, which is attached from above to a common rope (or wire or any other supporting structure) stretched over the entire ridge. As the stem grows, the rope is wrapped around it.

In the open air, the top support is attached to two stakes installed along the edges of the ridge. In closed ground, including in a polycarbonate greenhouse, the upper longitudinal device can be fastened without stakes, on the greenhouse frame.

Yes, not only people need reliable support! This is also very important in plant life.

Goodbye, dear readers, see you soon!

Sincerely, Andrey

Enter your email and receive new articles by email:

Construction and finishing. Equipment. Wallpaper. Coloring. Facade

How to tie tomatoes. We tie tomatoes in the open ground correctly: we save the future harvest