Children's slide for the dacha: the product we will talk about in this article on the website. Drawings photos and video instructions will help you build DIY children's slide. A children's slide is probably one of the mandatory elements of any summer cottage if you have children. Any number of structures can be installed on the playground various types: sandbox - the choice depends on your desires and financial capabilities. Most items for the playground can be made independently. For example, children's slide It is constructed quite simply, and has served as a source of children's joy for many years.

The main requirement for children's slide at the dacha is safety

Mandatory conditions for a children's slide in the country

Children's slide at the dacha can be installed both indoors and outdoors. It is worth understanding that the slide is for a child (whether it was built for a home or for an outdoor in this case does not matter) must meet certain requirements:

• For construction, you need to use only environmentally friendly materials that are safe for the health of the child. It doesn’t matter whether you are building a slide from wood, metal or plastic, the material should not contain harmful elements. The same goes for paint and varnish materials, with which you will open the structure. Another important point both for a children's plastic slide for the home and for a wooden structure - it is fire resistant;

The most popular materials for slide construction– wood and metal

• be sure to use structural elements such as railings and fences. They will not only help the child maintain balance while climbing the slide, but will also protect him from falling during games. Railings on a slide for a child in the country should be installed regardless of the age of your child;
• It is best to use wood to build the structure. Children's wooden slides for the home are more pleasant to use due to the natural origin of the material. IN street conditions Wooden slides do not heat up as quickly as metal ones, so they can be installed in any place convenient for you, and not just in the shaded part of the site. A child can easily get burned on hot metal, but wood does not heat up to a dangerous temperature;

Metal slide with a wavy slope covered with acrylic paint

• plastic children's slide easier for the street than wood or metal. It can be easily moved from place to place and transported if necessary, but the material itself is less durable and can easily crack;
• slide should be located away from trees, lamps, outbuildings and other structures. This is done so that the baby does not get hurt when going down the slide. The surface around the slide can be sown with lawn grass or a special rubber coating can be used. Remember that the main thing is the child’s health, so any street children's slide for the garden must be safe;

Slide must be installed on open area, which will help minimize possible injuries

• the base should be strengthened with a metal support or concreted. You should not rely on the fact that the child will not move the structure from its place - even the most durable slide can tip over as a result of children's games;
• an important point is the height of the structure being constructed do-it-yourself children's slide for the dacha. It must be appropriate for the child’s age, for example, the height of a slide intended for younger children school age, should not exceed 3.5 m.

Wooden slide with two slopes, a house and a swing, built in the courtyard of a private house

Helpful advice! The design of the slide must have no gaps or openings, otherwise the child may get stuck or be seriously injured during the game.

DIY slide construction: materials and tools

How build a slide at your dacha with your own hands without special labor? If we are talking about a wooden structure, you will need several wooden beams, planed boards, slats, lining and fiberboard. You can connect the elements together using nails, anchor bolts and screws.

Process construction of a children's slide made of wood

The list of tools needed for construction is very simple:

• wood saw, manual or electric;
• hammer;
• hand or electric drill;
• plane;
• tape measure and level;
• drill.

A slope for a slide can be purchased from a factory or you can make it yourself

By the way, it is not necessary to use a wooden ramp - cracks may appear on it or chips may break off, which can injure the child. You can buy plastic slides and install them on a wooden structure.

In the case of a metal structure, everything is a little more complicated. You'll need it here welding machine and Bulgarian. All seams and joints in wooden and metal structures should be carefully sanded so that the child does not accidentally get hurt during play. Metal ramps for children's slide should be painted with a special paint that will absorb sunlight and prevent the metal from heating to high temperatures.

Drawing of a wooden slide device for babies

How to build a children's slide at the dacha with your own hands

If you decide build a slide for a child on your own, you should follow a certain sequence of actions:

• first of all you need to prepare construction plan. You can take a ready-made one from the Internet or draw your own. Ready drawings of a children's slide made from wood with your own hands are good because they indicate the exact proportions of the elements and the sizes of individual parts;
• Referring to the diagram, it is necessary to cut the boards, slats and beams. In addition, they must be sanded so that splinters cannot get under the child’s skin. Using a plane, the beveled edges of the corners of the parts are removed, which will further increase the safety of the structure;

Wooden structures are environmentally friendly and quite easy to install

• markings are carried out in the designated area. It is worth allocating a site with a reserve if you are going to build a children's slide along with it. sports complex for the dacha. Optimal size for a structure without additional extensions - 2 by 2 m;
• recesses of approximately 60 cm are dug under the supports. wooden beams, the ends of which should be covered with a special waterproofing mastic. This is done in order to extend the service life of the supports. Grooves are cut into the racks into which connecting wooden boards. The elements of the resulting frame are connected to each other using bolts or self-tapping screws;

Drawing of a wooden slide for a children's playground in the garden

• then the floor is installed. At building a slide at the dacha with your own hands remember: it is important that the floor is as strong as possible, so thick boards are selected for it, which are connected to each other with self-tapping screws and screwed to the frame using metal corners. If you do not want water to accumulate on the floor of the slide, you should leave small gaps between the boards, but not enough for the child to stick his finger into them;

Railings and fences – required elements designs children's slide

• A ramp for children's slides is being manufactured. Its width should not exceed 80 cm. The surface of the slope is covered with linoleum, galvanized sheet or plastic. Linoleum is the cheapest option, but is easily warped and torn. The metal coating heats up noticeably in the sun and can also bend. The most reliable option is plastic slides for children's slides. Plastic does not overheat, does not rust or bend, but is more expensive than linoleum or metal coating;

Drawing of a slide structure for a children's sports complex

• a ladder is being installed. The optimal size of boards for its manufacture is 20 mm. After installing the main part, the side part is installed. To do this, a board sawn at an angle of 45° is attached to the racks with screws. Then the bars are screwed to the board, onto which the steps are mounted. Photos of do-it-yourself wooden children's slides on the Internet clearly show how exactly the elements of the stairs need to be attached. After installing the steps, balusters are installed on which the railings are attached;

Photo: the sandbox can be arranged both at the base of the slide and at the end of the descent

Helpful advice! Railings must be made in any case, regardless of the height of the slide or the angle of inclination of the stairs. They serve not only for safety, but also to make it easier for the child to maintain balance when lifting.

• Grooves are cut out in the side of the racks into which side walls made of plywood or fiberboard are installed. The walls can also be made of small boards or have some original look;
• All protruding corners, heads of nails and screws are removed, all surfaces are carefully sanded and coated with paint or a special protective varnish.

Drawing of a children's slide for a summer residence. Overall dimensions: length - 3020 mm; width - 890 mm; height - 1800 mm. Maximum user weight - 100 kg, minimum child age - 3 years

An interesting modification of the design could be a slide - a sandbox for children. In this case, the sandbox is organized either at the base of the slide, or you can build a reservoir with sand at the end of the descent.

Materials for building a children's slide

If you are in doubt about what material to use to build a house with a slide for children or another similar structure on personal plot, you should familiarize yourself in detail with the features of buildings made of the two most popular materials - wood and metal.

Wooden children's sports complex for a summer residence with a slide

Features of a wooden slide

Wooden structures for playgrounds have proven themselves several centuries ago. All children's slides made of wood with their own hands are built according to a classic layout, which includes a ladder and a ramp, a base, an upper platform and a protective part. In addition, often standard project add additional elements, for example, an internal labyrinth, a sandbox, additional descents and much more. Since such a design can be made quite simply, everything here depends solely on your imagination.

Photo: installing a plastic slide is the best option when building a slide intended for small children

One of the significant advantages of creating a wooden slide for children in the country with your own hands is the low cost of production. The material itself is relatively inexpensive, and specialized tools are also not needed to process it. In addition, building a structure from boards and timber does not require any special construction skills and abilities from you - sometimes it is enough just to strictly adhere to the diagram found on the Internet.

Another advantage of this design is its environmental safety. Wood does not cause allergies and does not emit harmful substances when heated. The only controversial point here is paintwork structures, so be sure to read the instructions when purchasing varnish or paint to cover the slide.

Photo: simple design children's slide made from tree trunks

Helpful advice! The wood for the slide must be High Quality, dry and well sanded. Choose the strongest types of wood, and to increase resistance to humidity or temperature changes, the boards must be coated with a special compound.

An element that should be given special attention when installing a wooden structure is the descent. It is best not to take risks using planed boards yourself, but to purchase factory-made material for the ramp. It can be linoleum, a sheet of stainless metal or plastic.

Photo: children's playhouse wooden with plastic slide

Features of a children's metal slide

Metal slides for children used to be in every yard and, with proper care, could last for decades. Photos of children's slides with their own hands made of metal show that in appearance they are not much different from their wooden counterpart.

A significant advantage of a metal structure is its strength. The iron structure does not require special treatment or maintenance and withstands temperature changes, high humidity, large mechanical loads. The only thing that needs to be done periodically with a metal slide is to renew the paint and make sure that the paint coating does not peel off as a result of corrosion.

Strength and durability are the main advantages of metal structures

How make a slide for children with your own hands made of metal? To do this you will need ready-made elements, a grinder and a welding machine. Special attention It is worth paying attention to the seams, as they are potentially dangerous for the child. The quality of welding is also of fundamental importance: the higher it is, the stronger the structure will be.

Flaw iron slide– quick warming up in the sun. If you install such a structure where the sun's rays constantly fall on it, your child can easily get burned. Therefore, if you decide to build a building from metal elements, you should select a place for it in the shade or make a special one.

Photo: a metal slide with a plastic slope installed by the pool

At building a slide with your own hands it is not necessary to use only wooden or metal elements. These materials can be combined in different proportions, thus obtaining an original, reliable design.

Of course, one can always wonder where buy a children's slide for the dacha. This can be done in any specialized store or online. But remember that only a design made by yourself will satisfy all your requirements and allow you to realize your design fantasies.

Even a factory-made slide can be supplemented with independently created elements

There are a number of points that are worth considering to ensure that the design is reliable and safe:

• for additional stability of the balusters, the staircase of a wooden structure should be additionally strengthened with the help of planks;
• drawings, videos, photos of children's slides at the dacha with their own hands show that the grooves and slats inserted into them, when bolted together, form a light, but strong and stable structure;

At construction of a children's slide in the country the height of the structure should be carefully calculated

• an excellent option for painting a structure - acrylic paint. It is safe for the child’s health and protects the tree well from various types of negative impacts and looks attractive. Acrylic is also famous for its durability and does not lose color saturation even with prolonged exposure to direct sunlight;
• a convenient type of covering for use under the slide - artificial grass or rubber. This does not require special care, does not change its properties depending on the time of year or weather, and creates a safe surface under the slide that will protect the child from injury if he falls from the slide.

The surface around the slide for children should be as traumatic as possible

Plastic slide for children purchased in a store or construction market is not always the best option. Yes, you save time and effort due to construction, but a wooden or metal structure can not only cost less money, but will also allow you to create a full-fledged sports complex for your child, consisting of large quantity elements. By the way, even a plastic slide for children can be supplemented with homemade elements and turned into a complex and exciting structure for games.

A high-quality and reliable slide is not only good way keep your child occupied during their stay country house, but also the opportunity to develop it physically.

Setting up a playground is impossible without a slide. But you need to choose the design very carefully and take into account all the nuances. This means safety, comfort, and ease of making it yourself.

Kinds

Speaking about the types of children's slides, we must first distinguish two types: garden and located in the house. Most often, home structures are placed in the bedroom. They can be made from randomly selected materials, even plywood or particle boards. This is unacceptable on the street - the adverse meteorological influences there are too strong. But the basic approaches to design remain unchanged.

The difference may be due to the materials used to make the slide. For it they use:

• tree;
• metal.

• ease of assembly;
• minimum occupied territory;
• possibility of obtaining various forms;
• convenience and safety;
• seasonal versatility.

Plastic allows you to make slopes in the form of a spiral, pipe or wave. Excellent heat capacity plastic stingray allows it not to overheat in the summer, and also maintain a comfortable temperature in the winter. The work is very simple, you just need to assemble the parts in accordance with the instructions. However, plastic is fragile, especially if we talk about cheap Chinese samples. It doesn't last long enough.

Often on site nearby apartment buildings you can see metal slides. They are very durable and serve long time. Even with active use, the attraction will work enough for several generations to use it. You can make a structure with different heights and with unequal lengths of descent.

However, before choosing such a structure for your yard, you need to take into account its weaknesses.

Metal conducts heat too well. In hot weather, it gets very hot, and when cold weather sets in, the skaters easily freeze. This can lead to bad health consequences, even if they are not noticed in the heat of the game. You also need to remember that metal requires maintenance. And if the ramp is made of steel, it may corrode.

Wood is attractive for many reasons. It is safe in environmental and sanitary terms. Wooden structures are relatively lightweight and can be placed in any location. Weather conditions do not prevent their use. But we must understand that Even the best wood can become deformed from dampness and temperature changes.

For protection it is carried out special processing. However, it complicates and increases the cost of the construction process. In addition, it is necessary to carefully select impregnation compositions, since not all of them are safe enough. But wooden slide can be easily repaired with your own hands. And during the construction stage you will not need to use a welding machine.

The large area occupied by the slide (especially together with the descent) requires a more thoughtful approach to organizing this element of the playground. You cannot limit yourself to choosing the right material. Often the slide is complemented by a house. Not only does it become another place to play, but it also helps provide shelter from the rain in summer months. It is also worth mentioning that the types of slides differ both in the presence of the house and in the size of the structure.

Drawings and dimensions

In order to properly build a slide for children on a summer cottage, it is necessary to draw up drawings and diagrams. If the slope profile found on the Internet does not suit you, you need to turn it clockwise (to increase) or counterclockwise (to decrease) the angle. The steeper the slope, the more enjoyable it will be for children. In addition, such a design will take up less space, which is especially important in the country.

But when the slope of the slide is tilted by more than 40 degrees, careful calculations must be made so that the braking section does not turn out to be excessively long.

Typically profiles are drawn to the same scale, from bottom to top. At the same time, they try to ensure that the distances between the starting points coincide. After this, vertical secant lines are prepared, between which there should also be an identical distance. The angle of the slope is determined by how large the free space is.

If in the courtyard of the house near the descent there will be a wall, a pool or other dangerous places, you need to plan to build the steepest slide possible.

When drawing up drawings, it is necessary to take into account not only the accessible territory, but also the age of the children. So, if the design is designed for a category of 3-7 years, you can make a playing surface at a height of over 2 m. But in this case you will have to make barriers from metal, the height of which will be at least 0.7 m. If children of any age can use the slide, the openings of the fences can be a maximum of 0.5 m. In this case, the height of free fall should be limited to 2 m.

When is a fall likely? upper platform, when designing, it is necessary to provide for the laying of an impact-absorbing coating. Drawings often do not indicate supporting structures. And also there may be no other deepening elements. The form should be as simple as possible, since it is difficult to build a structure with a sophisticated configuration. The drawing of a slide for the street should be made in such an orientation that the descent is not directed towards the roadway.

Design

At an early age, children's imagination does most of the work. It is able to “colorize” a seemingly unremarkable element on the site, presenting it as a fairy-tale space. But it is quite appropriate for some adults to want to help the imagination, to push it in a strictly defined direction. And if it is difficult to diversify the slope, then the ascent can be presented much more interestingly than a simple staircase. Excellent solutions this kind can be:

• slide in the form of a “tractor”;
• a house on a tree;
• "locomotive".

How to do it yourself?

On the Internet you can easily find many schemes for arranging a children's slide. But you should seriously pay attention only to such drawings and drawings that show the barriers in detail. Children of any age play with abandon and lose their sense of reality. Therefore, both fences and railings must be present. Special attention should be paid to the materials from which the slide as a whole and even its minor parts are constructed.

There are two main requirements: sanitary safety and minimal risk of fire. All wooden and metal constructions must be sanded to minimize the risk of injury. When thinking about a future structure and constructing it, you need to exclude any slotted partitions and gaps. When playing, children do not watch where they put their fingers or even their heads. It is useful to imagine the slide through the eyes of a child, and then it will become clear where dangers may be hiding.

The step-by-step design of sports equipment begins with the preparation of the descent. It is made from boards that match in length and width. The wood is carefully sanded to ensure a safe descent. To connect the boards, bars are used, placed from below. The next step is to attach the side parts of the structure to the descent.

In order not to carefully calculate all the proportions, you can simply repeat standard sizes factory slides. It is 1.3 m in height at an inclination of 55 degrees. The boards of the side parts are selected and placed so that the ends are at the top of the site. They function as handrails that you can hold on to before descending. The sides are secured on both sides with self-tapping screws so that they hold onto the base of the descent.

Important: the side parts should be thoroughly processed. All sharp corners are cut off and even sanded with sandpaper. To spend less time and effort, you can simply take a grinder with a grinding disc. Next you need to do the marking. At this point you will need a garden auger.

Recesses in the ground obtained with its help are needed for installing timber. Note: the bottom of this beam should be lubricated with mastic. Now the places where it was placed are being concreted. Only this solution ensures the reliability and stability of the structure. It is recommended to mix the mortar using M500 cement in standard proportions.

Grooves are cut in the upper part of the beams with a saw. They are needed to install the trim strips. The parts are connected using self-tapping screws. The slats solve two problems at once: they increase rigidity and ensure the safety of children. Now you need to attach a couple of wooden crossbars to the frame.

A ladder is attached to them on one side and a prepared descent on the other. When this work is completed, it is necessary to build a wooden floor. When making it, boards are laid, attaching them with self-tapping screws.

Important: boards cannot be placed closely. The gaps should be such that there is no risk of injury, but water can drain freely.

If maximum strength is needed, the joints of wooden parts are reinforced with steel corners. It is recommended to make the slide twice as long as it is tall. When choosing a site, you need to make sure that it does not end up in a lowland. When it rains for a long time, a “swamp” will form there. All wooden and plastic parts must be impregnated with fire retardants.

But the construction of a wooden slide can happen differently. Alternative scheme implies that they will first remove all the soil and level the excavation. This is necessary if there is fertile land there - then it will not be empty and will be useful somewhere else. Next, the site is covered with sand and after a while, when it settles, the entire area is compacted. This time should not be wasted, you can:

• prepare wood;
• dry it;
• cut according to the drawing;
• sand;
• impregnate with protective components.

The steps, handrails, railings and boards that will be needed to build the “tunnel” are painted twice with enamel. They need to be sanded between paintings. This concludes the preparatory stage. The time has come to build the foundation: reinforcement is placed in the holes prepared using a garden auger. It will certainly be verified according to the building level.

When the reinforcement is placed, it is immediately concreted, and the corners are welded on top. The pillars that will be placed at the base must be sawed in certain places. These recesses will allow you to fix the timber at the corners with self-tapping screws. Next, the pillars are connected to each other using jibs. The staircase is made like this: stringers are attached, and then steps are placed on top of them.

But the ladder cannot be used normally if it is not supplemented with a launching pad. When this work is completed, it is necessary to prepare the base of the descent (it is made of timber). A steel curved profile for the slope is installed. A plywood shield is placed on top of the base under the slope. A sheet of iron is nailed onto this shield.

The outer edges of the sheet are folded and secured to the profile. Otherwise, injuries are inevitable. Now you can cut gaps in the boards and wrap the edges of the sheet there. A boardwalk is being prepared under the ramp. The sides are covered with plywood. Now you can:

• put up the sides;
• complement the stairs with railings;
• build hipped roof, cover it on top with plywood.

• sheet of plastic;
• linoleum;
• galvanized steel 0.05 cm thick.

It is not advisable to use laminate for slopes. Under constant load or simply upon contact with water, it is easily deformed. And here are some more recommendations:

• You can increase the protection of wood from moisture by polishing it with wax;
• for covering a wooden slide Oil paint much worse acrylic compositions and varnish;
• you can’t place a slide near poisonous plants and honey plants;
• you must immediately ensure that there are no pipes or electrical appliances nearby;
• You cannot orient the slope towards the roadway, fence or main wall.

Beautiful examples

It would take a long time to list the rules for building slides and study the nuances. But it is much better to take the initiative and focus on ready-made design ideas. The photo below shows a simple light-colored slide built almost entirely from wood. Only the surface of the slope is laid out sheet iron. At the same time, the protective sides are completely wooden. Contrary to the fears of some people, this decision does not look sad at all.

But you can also make a multi-colored colorful design, even complemented by a rather long transition between ascent and descent. A couple of tent buildings provide shelter from not too heavy rain. There is an even simpler option, in which the entire surface is made of wood. This design should be chosen when you need only functionality and not brightness. appearance.

To learn how to make a slide with your own hands in one day, see below.

Today we'll talk abouthow to do winter DIY children's slide.Let's consider detailed drawing and construction schemes, we will discuss the material and tools for the construction of this object.

The slide is the most interesting equipment for active games on the playground. You don’t have to buy expensive ones to please your child. ready-made solutions, of which there are many on the market. Today you have the opportunity to create a slide yourself. I hope the article will give you a good hint and be useful during construction.

So let's get started. Tools: miter saw, or hand saw, screwdriver, tape measure, pencil. To fasten the parts together, use wood screws.

Material - dry planed board with a thickness of at least 25 mm, or, in our case, a floor board 28 mm thick and 133 mm wide (without tenons). Our drawing is made for a board of exactly this size.

Scheme of construction of a children's slide.

Let's divide the construction of the slide into 3 stages: pedestal, ramp, stairs.

First of all, we assemble the pedestal, to which the ramp and staircase will later be attached.

We start with the side frames. If you are using a floor board, cut off the tenon.

We attach the guide for the flooring according to the dimensions indicated in the diagram.

We twist the sides together and we astil the floor.

At the second stage, we build the slide slope.

First we make the flooring for the slope. We cut boards 2000 mm long, connect them to each other - tenon into groove. We take into account the size of the pedestal opening for further fastening of the ramp; for us it is 900 mm. We lay the transverse boards for the bundle, retreating 200 mm from the edges of the slope, and twist the structure.

We prepare the sides. If you are using a floor board, it is advisable to cut off the tenon and turn the groove of the board so that it faces down. We make cuts for attaching to the pedestal.

We connect the sides with the slope

We screw the ramp to the pedestal.

The third stage - we install the stairs. First, we prepare 2 guides for the stairs.

We fix the guides on the pedestal.

We screw the thresholds. Threshold height 200 mm, quantity 4 pcs.

Do children's activities seem unsafe to you? Are you afraid that your child might get injured while looking for adventure? The best way out of the situation is not to ban, but to provide a safe place for games! Moreover, making a children's slide with your own hands is not so difficult. For this you will need a minimum of material, construction tool and a little imagination. A practical advice on construction, design drawings and recommendations regarding the choice of building materials can be found below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for a play slide

A children's slide must first of all be safe and comfortable:

1. The descent must necessarily have a “brake pad” - a section where the ramp is parallel to the surface of the pad. Otherwise, the speed of descent will not decrease, which may lead to injury to the child.
2. The length of a self-made children's slide should be exactly twice the height of the structure. So, if the length of the ramp is 5 m, the height of the launch pad cannot be more than 2.5 m.
3. There should be no buildings or fences within a radius of 1 m near the descent area. This is necessary so that the child cannot hit himself if he accelerates too much.
4. It is necessary to provide a special covering in the descent area (sand, rubber mats, etc.). There shouldn't be a swamp there in rainy weather!
5. If a sandbox or hammock will be placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's feet will fall onto the heads of those located below.

How to choose material for a slope

The choice of materials for covering the descent is not that great. And, taking into account the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let’s look at what you cannot use to make a children’s slide with your own hands:

• Polycarbonate (especially cellular). This material, firstly, does not glide well, and secondly, when broken, it forms dangerous chips. In addition, in summer, polycarbonate expands, creating waves. Therefore, the slide will quickly become unusable in hot weather.
• PVC panels. A very fragile material that cannot withstand harsh winters.
• Glass mats. Strictly not recommended for contact with the skin of a child.

Winter slide made of monolithic polycarbonate

How to achieve a “mirror” wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are ready to devote several days to making a slippery wooden ramp. After all, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

Why is a wooden slide attractive?

Pros of a wooden slide:

• The child will be surrounded by environmentally friendly, natural materials.
• The surface will not heat up as much in the heat as, for example, metal.
• In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a slope made of wood:

• If there is sand on the site, the varnished surface will very quickly become unusable. Children will bring sand on their clothes and scratch the slope with it, like sandpaper. So be prepared to renew your coverage annually!
• The slightest oversight while sanding the surface can result in splinters and scratches for the baby after skating.
• Sliding speed wooden surface in any case, it will be low, which will quickly make a wooden slide uninteresting for growing children.
• IN summer time it will be impossible to convert the slide into a water park, that is, to supply water to the slope.

A selection of drawings of a wooden children's slide for making with your own hands:

A simple drawing of a wooden slide

Low descent for small children

Play complex with slide

Simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly withstands the effects of precipitation.

Secrets of slippery surfaces

A few secrets on how to make a wooden children's slide truly slippery:

• A wooden slope (dry and sanded) can be coated with a special oil that protects the surface (for example, Pinotex). This must be done in several layers. Thanks to this procedure, the wood will not lose its smoothness, and moisture will roll off well without destroying the surface.
• Sanding the wood layer by layer after each application of varnish will help achieve the effect of a mirror surface and make the slide really slippery.
• A plywood slope can be covered liquid acrylic, used for bathtub renovation. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches will form on it quite quickly, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but the appearance of the structure will be spoiled.

Sanded wood escapement

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawed off with a jigsaw at an angle of 45º. In this version, the sheets are arranged as if overlapping, and one element “crawls” onto the other.

Metal coating – we care about the safety of the baby

A ramp made of stainless steel or galvanized sheets is a “classic of the genre” when building a children’s slide with your own hands. But this solution also has its drawbacks.

1. Firstly, in order to cover the entire slide, you need to either overlap it or spend money on a much more expensive sheet of metal of a larger size (sheets 2.5 and 6 m long are available for sale). There is a third option - take time to search construction company, which will agree to “cut off” the required piece of stainless steel from the existing roll.
2. Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of illumination of the structure. But such a layout is not always possible on the site!
3. Thirdly, thin steel is very sharp and completely unsafe for a child. A carelessly bent corner can cause serious injury to your baby! Therefore, you need to bend the sheet extremely carefully, firmly fixing it to the base board.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take alucobond (an aluminum panel) and attach it to liquid nails. The advantage of this solution is wide color palette material!

Secrets of good metal slide:

1. The shield under the stainless steel sheet must be perfectly flat, without protrusions or differences. After all, stainless steel is extremely thin and does not compensate for surface imperfections. To do this, it is better to pre-cover the construction boards with fiberboard boards.
2. It is not recommended to buy a mirror stainless steel, since it heats up much faster and stronger in sunny days. A much better option is polished stainless steel.
3. The sheet should be much wider and longer than the slide itself. After all, for the safety of the child, this covering around the entire perimeter needs to be folded and hidden under some kind of plinths or boards.

Advice! You only need to fasten the sheet of metal along the edges (to the sides and bottom). It is strictly forbidden to make fastenings on the surface of the slide slope!

Flooring slide - cheap and cheerful

Another interesting and inexpensive option is to cover the slide with a sheet of linoleum. The advantages of this solution are obvious:

• the material is relatively cheap (you can buy scraps, which are sold at half the price);
• a perfectly flat surface is not needed under linoleum due to its thickness and softness;
• the base under this material does not rot, it protects the wood from moisture and temperature changes (if linoleum is on the sides, in the summer you can make a water slide);
• linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, like other coating options.

A linoleum slide is suitable for home

But such a slide also has quite a few disadvantages:

• the coating must be changed annually due to its rapid wear;
• in very hot weather, linoleum can melt, which is dangerous in terms of getting burns;
• the sliding speed on this material is very low;
• the design with linoleum does not look very aesthetically pleasing.

For optimal gliding, felt or felt mats can be provided for skating.

Building a wooden slide for a child - step-by-step instructions

Every child's dream is a multifunctional playground, with which you can realize any ideas for games. So, step-by-step instruction for building a children's slide with your own hands.

Proper preparation is the key to successful construction

Preparatory stage:

1. Remove fertile soil at the construction site and level the soil. Fill the area with sand and let it settle and compact (it is advisable to complete this stage in the fall, and begin building the slide in the spring).
2. Prepare wooden blanks (stringers, railings, boards for steps and “tunnels”, beams for the base): if necessary, dry everything, saw it to the selected size and carefully sand it, and then soak it with a protective mixture.
3. Paint the steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
4. From 12-gauge plywood, cut out the side elements (for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Installation technique for the base structure

Frame installation:

1. Build a foundation. To do this, you need to make holes with a garden drill, install the reinforcement in them at a level and fill everything with concrete.
2. Weld the corners to the fittings. Make cuts in the pillars for the base of the slide and mount the timber on the corners, securing everything with self-tapping screws. Connect the pillars to each other with jibs.
3. Make a staircase: fasten the stringers (it is advisable to add boards on the back side for additional structural rigidity), put steps on them.
4. Install a launch pad with a ladder leading to it.
5. Next, make a base for the descent from timber and install a curved metal profile (25x40) for the slope.

Bearing structures

The final stage - we finish construction

Do-it-yourself slope and lining of a slide for a playground:

1. Lay a plywood board on the base for the ramp and make a galvanized iron deck. Fold parts of the sheet along the perimeter and attach them to the bottom metal profile. Cut a gap in the boards forming the platform and also wrap the iron flooring there.
2. Make a tunnel from boards under the slope. Sew up the side parts with plywood.
3. Install bumpers on the slide and railings on the stairs.
4. Install a hip roof and cover it with pre-treated plywood.
5. Sew up the side parts of the structure with sheets of plywood and cut holes in them for the climbing slide.

Organization of the slope and lining of the slide

Creative slides – making a child’s dreams come true

Children's imagination is strong and sometimes incomprehensible. In a child's imagination, even the simplest hut can easily turn into a beautiful castle! Therefore, a simple descent with a ladder will be enough for kids to have fun. However, there are many options for how to make a children’s slide with your own hands in an extraordinary and creative way - examples in the photo.

Downhill Tree House

Under the protection of the stone lion

Advice! In order to maintain interest in the slide for a long time, it is advisable to provide additional entertainment elements at the launch site.

Playground– the dream of every child aged 3 to 13 years. And in order for the play area to meet the changing needs of children, all the details need to be thought through at the planning stage. You may need to invite a specialist to do this, who will save you from the need to make a children's slide with your own hands. And then a real play complex will appear on your site - safe and comfortable.

Video: DIY children's slide

If you have children and country cottage area, then it’s definitely worth building a slide on it. While parents are gardening or cooking barbecue, the kids will have fun on the mini playground. Read about how to plan and make a slide with your own hands, using photo and video instructions in practice.

Height and safety

The slide on the site should first of all be safe for children of different ages. So, for children under 2 years old the height of the slide is only 1.5 meters, for children from 2 to 7 years old the height is about 2.5 m, and for teenagers 3-3.5 meters. The steps on the slide ladder should be wide, and the rungs should be located close to each other. Further, the staircase design must be equipped with handrails of any type: after climbing the slide, the child must hold on to something.

Advice! To ensure that the slide serves more than one generation of children and is safe on the stairs, an anti-slip coating is laid around it. The covering protects children from injuries when climbing during rain, snow or after swimming in the pool.

Another important stage in creating a safe slide is calculating the weight of the children who will ride on it:

The height of the slide depends on the age of the children

1. The slide is secured to a base or supports that can easily support the weight of 2-3 children.
2. A level gutter is responsible for safety during descent; it is good to make sides on the sides to prevent the child from falling out.
3. All bolts, chips, chips or sharp corners on the children's slide are excluded. The wood is sanded so that the child does not drive a splinter.

Advice! Under the gutter along which the child descends, a soft piece is placed - this lawn grass, a mound of sand or soft covering.

Choosing a place to place a children's slide

The slide is placed in the place where it opens good review from any point on the site. But make sure that the place for games is not in the very hot sun. In the case of such an arrangement, it is worth thinking about building a canopy.

Advice! The canopy is made of polycarbonate, and a regular beach umbrella is also suitable for a low slide.

Wood slide

Slide from natural wood distinguished by its environmental friendliness and ease of installation, it consists of the following elements:

1. Base.
2. Staircase with railings.
3. Descent.
4. Top platform and protective parts.

Such a slide can be complemented by a whole of labyrinths, beams, sandbox or mini rooms with entrances and exits. The construction of a wooden slide involves the selection of high-quality raw materials and their normal processing.

Wooden slide

The ramp is made of plywood, pre-coated with varnish to hide sanding errors. The supporting structure is made of timber, and the steps are made of strong boards.

Important! Today, there are a variety of ramps available for sale, made of durable plastic, fiberglass or wood. The minimum price of a stingray is 1.5-2 thousand rubles. The best option is to create a supporting structure for the slide and then install a flat or spiral slope.

A wooden slide is good for everyone, but located in an open space, after 3-5 years it can dry out, be damaged by insects or mold. Wood rots from rain, and the situation can be saved by covering each structural element with a thick layer of varnish. But after winter and hot summer, the slide should be inspected, identifying dry or cracked parts.

Metal slide

Previously, metal slides stood in every yard, distinguished by their strength and durability. Such designs are more reliable, because they are not afraid of the hot sun, rain, or frost.

The construction of such a slide is carried out in several stages:

1. The most primitive foundation is poured; you can immediately pour 4 support pipes, as is done when installing fences.
2. Next, the stairs and railings are welded onto 2 pipes on one side, the remaining 2 pipes are used to attach the gutter.
3. A platform is welded onto all pipes.

Important! Gutter is 2 metal pipes, to which a curved sheet of metal is welded. After assembling the slide, everything welds must be sanded; a grinder is used for these purposes.

After completing the assembly of the structure, the slide can be painted with plain paint or painted. The metal gets very hot under the sun, so on hot days it is worth covering the slide with a beach umbrella to prevent children from burning their skin.

Play complex with slide and swings

A simple slide can be made using a descent from a house, which is also built with your own hands, using timber or leftover building materials:

1. Concrete piles are mounted in 4 old car tires and on which beams of the required height are installed vertically. The beams are secured with construction corners.
2. A frame for the house is installed along the perimeter of the posts, with holes for entry through the stairs and exit through the slide.
3. After this, a light but durable ladder, a chute for descent, the floor and walls of the future house are installed. The elements are attached using self-tapping screws, and the entire wooden structure must be coated with an antiseptic.
4. Holes are drilled at the joints of the beams, tightening the structure with 120 mm bolts.
5. Next, stack rafter elements from timber for the roof. The final roof covering is made of corrugated sheets. Decorative tiles made from ordinary colored foam are often used.

The last stage is to cover the entire structure with a layer of varnish.

How much does a finished slide cost?

To avoid the hassle of making it, you can simply purchase a slide:

• Inflatable slide for the little ones. This slide is an ideal solution for small children, because it can be equipped with a shallow pool, mini-trampoline or educational elements. The cost of an inflatable slide starts from 4 thousand rubles, usually it has a height of more than 1.4 m. The advantages of the slide are its mobility, resistance to temperature changes, and after the child grows up, the inflatable center can be sold at a profit.

You can buy a slide, but it will be more expensive than building it yourself

• Play complexes are made of plastic, in some cases combined with wood. This type of city is more expensive, and the minimum cost starts at 4.5 thousand rubles for the most primitive model. But plastic slides can combine swings that develop the muscle corset, parallel bars, basketball basket and much more. Thanks to the fastening system, the height of the gutter can be adjusted to suit the age and height of the child.

Creating a children's slide is a creative process, and a full-fledged play area requires a swing, a sandbox and even football goal. But it is much cheaper to build these elements of a children’s corner yourself, because purchasing a finished product requires 60% more material resources.

DIY children's slide: video

Slide for children at the dacha: photo