Traditional curtains are no longer so popular in home interior. Now it has become fashionable to use them as window decoration. Their popularity is quite justified, since these curtains are extremely easy to use and care for. Making roller blinds with your own hands is not at all difficult, because they are made of fabric or paper that is rolled into a roll. It is only important to choose the right design for such curtains so that they fit harmoniously into your home interior.

Advantages

Self-made roller blinds have many undeniable advantages. They not only fit perfectly into any interior, but also provide excellent protection from sunlight. You can choose from the wide range on the market the model that suits you completely. However, you can make roller blinds with your own hands, choosing fabric and even paper as the canvas.

If you want maximum opacity, choose a thicker material that will block the sun's rays from entering the room. In addition, the air gap created between the roller blind and the window will save heat in winter.

Mounting methods

There are several methods for attaching roller blind mechanisms. You can install them inside on top, above the frame, on the wall or on the ceiling. It all depends on individual preferences. Let's say if you often open a window to ventilate the room, attach the mechanism to the frame. Anyone can try to make roller blinds with their own hands. Photos of these curtains are presented in our article.

Installation options

The design of such curtains can be open or closed. The first option is the cheapest and simplest. The principle of operation is as follows: the canvas is loosely wound on the shaft, and when it is straightened, it is held by a rail attached to the bottom. In the second option, guides are additionally used to protect the structure from possible deformation and ensure the tightest fit of the curtain to the window.

There are also two ways to install roller blinds on a window:

• using glue or construction tape;
• using self-tapping screws.

If you decide to make a roller blind with your own hands, use the first option, since it is the simplest and is suitable for installing light-weight structures.

Leftover wallpaper: it's all in!

Many interior decorating accessories are quite easy to make. with my own hands. Roller blinds refer specifically to such designs. It must be said that making such curtains is extremely simple; you do not need to have any special skills for this. It will take little time to make such a roller blind, but the result will be amazing!

Decorate the windows with paper roller blinds, which will look very creative in any apartment. If you still have wallpaper from a previous renovation, you can make such a curtain in just an evening. Make roller blinds with your own hands from paper, it’s very simple.

Step No. 1. First, measure the width and height of the glass.

Step No. 2. Draw a rectangle on the wallpaper. Its width will be equal to the width of the glass, and its length will be ¼ greater than the length of the glass.

Step No. 3. Cut out a rectangle and fold it like an accordion, forming folds no more than five centimeters.

Step No. 4. Using an awl, we pierce holes throughout the middle of the paper sheet. Insert the cord. We straighten the fabric, securing the garter with a knot at the top of the future curtain.

Step No. 5. We also glue the construction material here and attach it to the frame.

Step No. 6. We decorate the five lower folds with a “peacock tail”. To do this, glue them together with tape on the inside.

Step No. 7. We bring the end of the cord inside out and insert the lock.

Our DIY roller blinds made from wallpaper are ready! The photo below will tell you how to do everything correctly.

Making roller blinds with a rod

Now let's make a curtain from fabric. Prepare the following tools:

How to do it?

First of all, cut and sew the fabric so that you get a bag. It will need to be turned out. Sew up the remaining edge and press with an iron. For the slats it is necessary to form some pockets. Do it this way: bend the edges of the roller blind at the top by 3 cm, and at the bottom by 1.5 cm. Sew. Insert strips into these pockets. Carefully screw in a couple of screw rings on top of the block and on the inside. Perform these manipulations in top bar. Step back from one ring from the front side 5 cm to the edge and screw in another ring.

Cut two cords. The length of one should be 3 times the length of the curtain, and the second should be longer than the first by ½ the length of the curtain. Tie the cords with rings. Attach the longer one to a separately screwed screw. Pass the cords along the wrong side, bring them behind the front side and pass them through the rings again. Then pass them through the common loop on the side and tie.

The original roller blind is ready, all that remains is to attach it to the window. Screw 2 hook-screws into the frame so that they are opposite the top rings. Hang the structure. Screw the third hook into the side of the window frame. You will wind a cord around it, which will help to hold the roller shutter firmly and securely.

Step-by-step production of curtains with a lower shaft

Stage No. 1. Process the double-sided fabric by folding the edges.

Step #2: Form a pocket at the bottom. It will serve as a weight and shaft.

Stage No. 3. Using a stapler, attach Velcro to the top bar. Sew the second part of the roller blind at the top.

Stage No. 4. Connect the canvas to the block and wrap it.

Step #5: Cut two cords. The length of each of them should be 2 curtain lengths and another 20 cm.

Stage No. 6. Throw the ties over the bar located at the top and attach to it with a stapler.

Such a roller blind will be rolled up and straightened manually. You can easily adjust the height with tied cords. Do not forget to additionally strengthen the block with self-tapping screws. If you set a goal, it will be easy to make roller blinds with your own hands. Step-by-step instruction will help you.

Remaking a store roller blind

Sometimes it can be quite difficult to choose a roller blind for a specific interior design. If you suddenly have such a problem, you can absolutely safely purchase a ready-made design from the store and remake it to suit your own needs. How to build roller blinds with your own hands? The master class will help you realize your plans.

We will need the following tools and materials:

• roller blind;
• textile medium density(cotton, twill or canvas);
• polyester thread;
• cutter;
• scissors;
• double-sided tape;
• roulette;
• sewing machine;
• iron.

Master Class

Each finished roller blind comes with mounting instructions, so attach the mechanisms according to the recommendations. Remove the vinyl sheet from the cylinder and remove the weighting material. Now measure the inside of the roll between the clamps. Add 3 cm to this result. Label this value with the letter A. Measure the distance from the window sill to the fastening mechanisms. Add 25 cm. This is value B. Take a piece of fabric and cut it. Its width is size A, length - B. Place 1.5 cm on the sides of the cut and iron it. Sew the seams side by side. From the bottom edge, first lay 1.5 centimeters, iron and lay another 5 cm. Sew next to it. You now have a pocket in which you will place the weighting material. Attach the finished curtain to the roll using tape. Secure the fabric and twist it. Install the curtain and insert the weight material.

How to care?

Everyone knows that dust quickly accumulates on such curtains. That is why they must be constantly monitored and kept clean. Typically, roller blinds are periodically vacuumed using a furniture attachment. There is no need to remove the canvas from the window. It just needs to be closed and cleaned with a vacuum cleaner. The same manipulations should be done on the reverse side. If yours is made of plastic, you can easily wash them with water with added washing powder. Perhaps it will be more effective to clean the roller blinds with a cloth soaked in alcohol. Just wrap it around a rubber spatula and start processing. When finished, treat dry fabric curtains with an antistatic agent.

Just don't wash paper curtains with water. Of course, it will be a shame for you to ruin the roller blinds you made with your own hands from wallpaper. Clean them with a special paste designed for paper sheets. You can also use a stain remover that has a gentle effect. Be sure to wear rubber gloves when working with this type of product.

We always pay close attention to window decoration, as this is a unique opportunity to make the interior harmonious and complete in terms of design. One of the interesting and convenient ways of decoration is roller blinds. You can also make them yourself by implementing a certain design in your home.

Roller blinds widely used for window decoration residential buildings And office premises. Their popularity is explained by several features:

• they can complement curtains or be used as an independent window opening design;
• You can buy roller blinds for any type of window – plastic or wooden;
• the curtains fit tightly to the glass, so you won’t be able to see what’s happening indoors from the street;
• ease of care and maintenance is the main advantage of these systems;
• a well-thought-out design protects from bright sun and can be used to darken a room;
• a variety of design options – the ability to choose the design to suit your needs style features specific interior.

You can make such curtains yourself, or you can purchase ready-made roller blinds without drilling. Let's look at ways to create curtains of this type with your own hands.

To make roller blinds, you will need to choose the right fabric - its design and patterns should be in harmony with the overall style of the interior. When choosing fabric, pay attention to the following details:

• the color of the textile should fit into the color scheme of the furniture;
• It is better not to choose dark fabrics for the kitchen and dining room;
• the pattern of curtains and wallpaper should not match;
• if you need to visually enlarge the space, choose translucent fabrics;
• Blackout material is an ideal solution for protecting a room from light.

First lesson

Roller blinds in the photo look very impressive. And if you consider that you can sew them yourself, you have a great chance to give the interior the style that you like. After choosing the fabric, you can start cutting:

1. We spread the fabric on the table and cut it in accordance with the drawings - they are drawn up in advance.
2. We sew the fabrics together - we will need two of them: this way we get a bag, which we turn right side out.
3. We attach a weighting material with a special pocket to the structure, after which we completely sew up the bag. If you want, you can immediately fix the weighting material inside the workpiece, and then sew up all the seams.
4. The canvases are carefully ironed. We wrap the curtain around the rod and fasten it (with a stapler or hemming - it all depends on the material of the rod).
5. The rod-shaft is fixed above the opening or frame, and the installation must be carried out clearly vertically and horizontally.

You can also secure the canvas using a side cord. Tapes of fabric are sewn to the top edge of the curtain, which are threaded through plastic rings in advance. Then we take a decorative cord, attach it to the bar on the side of the opening, pass it through the rings and attach it to the wall.

Lesson two

The price for ready-made roller blinds is quite high, so it’s worth trying to sew them yourself. Moreover, this process is quite simple. It is important to take the correct measurements - of the opening or the glass itself if the curtain will be attached to it. From the materials we will need:

1. Fabric - two canvases, suitable for the size of the opening. They can have the same or different patterns.
2. Decorative cords that are needed for garters.
3. Wooden beam - the finished roller blind will be attached to it. Instead of a beam, you can take a metal tube - in this case, the fastening will be carried out with special elements.
4. Additional tools in the form of a stapler for furniture, screws and a screwdriver, sewing accessories.

The fabric is laid out on the wrong side and sewn along the length and width, after which the resulting bag, as in the first lesson, is turned right side out. Turn the resulting bag inside out. We think about the location of the weighting agent - in a special pocket or inside a bag. Now we take the block and wrap the fabric around it, fasten it with a stapler if a block will be used as a frame, or hem it if we use a metal strip. Now we take the garters, throw them over the upper fasteners, and fix them. We fix the beam in the window opening, and its upper part can be carefully decorated with a figured edge.

Lesson three

You can create light-proof roller blinds in another way - simple but original. This is just an imitation of curtains, since they will not rise or fall, but will provide reliable protection from light. To create such structures, prepare:

• textile;
• fabric glue;
• wooden crossbar;
• self-adhesive paper;
• construction stapler;
• hammer and nails;
• measuring tape.

The stages of work on sewing roller blinds are as follows:

1. First you need to find an image that will subsequently be transferred to the curtains. Stencils can be found in pdf format online. The image you like is transferred to self-adhesive paper and then cut out.
2. Now we cut the fabric for the curtains, not forgetting about a 10 cm allowance in width with a length of at least 2/3 of the height of the window opening.
3. The edges of the product are folded and ironed, and then glued.
4. All parts cut from self-adhesive paper are carefully ironed and glued to the canvas. The drawing must be allowed to cool, otherwise the image will be blurry.
5. The short edge of the fabric is wrapped around a wooden block and secured with a stapler.
6. Make as many folds as you like.

Features of blackout curtains

Blackout roller blinds are a good solution if you want to darken the room. The use of a special fabric, the reverse side of which is covered with acrylic, protects the room from light penetration by 100%. It is advisable to install such structures in children's rooms and bedrooms or in rooms whose windows face the sunny side. Thanks to modern technology, blackout curtains allow you to control the flow of light and the heating of the room, which other curtains cannot provide. Features of Blackout opaque fabric include:

• Reliable protection of the room from sunlight;
• Fade resistant;
• The ability to create draperies that hold their shape well;
• High fabric density;
• Good thermal and sound insulation performance;
• No harmful substances during combustion.

All types of Blackout fabrics differ in density, degree of opacity, color, pattern and the presence of a backing. Thanks to their versatility, such designs will ideally complement any interior and fit any window opening. Convenience of their operation is ensured by the presence of a weighting strip and side guides, due to which there are no possible side gaps, and when folded, the canvases are practically invisible on the window.

Cassette curtains

Cassette roller blinds attract attention because they are compact and are mounted without drilling. Thanks to their tight fit to the window, they protect the room from sunlight. The presence of a cassette box in the design allows, if necessary, to remove the slats, masking the mechanism. Cassette blinds beautifully complement windows in the kitchen, balcony, or office space. A variety of color and texture solutions is an opportunity to highlight the features of the interior. The advantages of cassette designs include convenient operation, reliability of the mechanism and ease of maintenance.

Instructions for cutting, sewing and attaching roller blinds to windows yourself with photos and videos

If you don’t want the curtains hanging on the sides of the window opening to block part of the light, there is a very original option.

You can sew roller blinds (sometimes called roller blinds) with your own hands. Such curtains are wound on a special roller fixed at the top of the window, thereby ensuring maximum access of light into the room. Learn how to make roller blinds with your own hands and secure them in the opening.

Design of roller blinds for windows

The design of roller blinds seems complicated only at first glance. In fact, even a novice seamstress can sew them - it’s not for nothing that roller blinds are becoming more and more popular every year and are replacing more complex and expensive blinds.

Roller blinds for windows made by yourself look original and can decorate any modern interior.

And their main advantage is the ability to combine them with curtains and tulle, which makes them unusual and memorable.

A roller blind for windows is a sheet of fabric that is wound around a roller attached to the top of the window.

The canvas is moved up and down with the help of a cord, and a rail is attached to its lower part, which makes the edge heavier.

Installing DIY roller blinds is recommended for small windows. The cost of the product is low, since little fabric is spent on its production.

You only need to purchase a piece of fabric that matches the size of the frame, since the panel does not form folds.

You can make a structure for attaching a roller blind to a window yourself or purchase all the components in a specialized store. Such sets are easily mounted on the window and combined with the panel.

Below are instructions for making roller blinds with your own hands and a video of their attachment to the opening.

DIY roller blinds for plastic windows: what you need

For the production of roller blinds plastic windows with their own hands they purchase specially shrinked fabric designed specifically for roller blinds.

Raising and lowering it will be easy, since there will be no rough seams at the junction of the canvases.

You can use other types of fabrics, but when choosing, you should pay attention to their density, strength and lightness.

You can make roller blinds yourself. To do this, the cut is treated with a special spray or soaked in a hard finishing agent.

Usually the fabric is soaked first and then when it reaches the right size trimmed.

The material is dense and durable and does not crumble at the edges.

To sew roller blinds with your own hands, you will need:

• fabric sheets. A roller blind can be a single panel or consist of 2-3 separate parts made for each shutter. It is not necessary to use the same fabric. For each sash it can be different in texture and color;
• cords, ropes and tapes. Used to make garters. It should be borne in mind that they should be 2-3 times longer than the entire structure so that they can be easily tied;
• weight tube for the bottom of the curtain. Can be metal or wood. If the length of the tube exceeds the size of the window, it can always be cut;
• rod-shaft It is a pipe made of metal or wooden beam. Additional fasteners will be needed if you stop at a pipe. The rod is selected in accordance with the width of the curtain or a slightly shorter length. Its diameter should be within 2.5-5 cm. Instead of a rod-shaft, you can use a ready-made kit for installing roller blinds. It includes a roller equipped with a lifting mechanism for attaching roller blinds. The roller is cut to the width of the window to required size and is fixed to the window frame;
• screwdriver, self-tapping screws, drill, dowels and fasteners, if conventional metal pipe, not a ready-made kit;
• standard sewing supplies.

How to sew roller blinds with your own hands (with video)

Making your own roller blinds starts with measuring. In order to determine the width of the curtain, it is necessary to measure the length of the roller, excluding fastenings, and subtract 1 cm from it. There is no need to increase the side seams, since the reinforced fabric hardly wears out.

To determine the length of the curtain, measure the distance from the roller to the window sill or any other desired point. You need to add 20 cm to the resulting number, then when the curtain is fully open, the fabric will cover the roller. To adjust the pattern and organic placement of the ornament, a small allowance should be allowed.

If the curtain will be located outside window frame, another 5 cm is added to the number obtained in the calculations. And the curtain is increased by 15 cm if its edge is planned to be decorative.

Keep in mind that each roller blind consists of two identical parts, so you must purchase double quantities of fabric.

The curtain can be made longer by another 10-15 cm. In this case, if its lower edge gets dirty or damaged, it can be cut off. This way the curtain will last longer.

To cut, lay the fabric out on a flat surface. If there is a large motif on the cut, it is recommended to place it in the center. Using a square, mark the bottom edge of the curtain and draw a line perpendicular to the bottom edge. Cut a rectangle of fabric according to your measurements. The second part is cut out in a similar way.

As shown in the photo, the parts of the roller blinds are folded with the right side inward and sewn on 3 sides:

The resulting bag-like piece must be turned out and the seams ironed.

The second stage of sewing is securing the weight tube. The length of the tube must exactly match the width of the curtain, otherwise the product will hang unevenly on the window, and the lower corners will bend. If the tube fits, you can secure it by folding the fabric under and stitching 5mm above it.

The third stage of production is the preparation of garters or ribbons. These details not only allow you to tie up curtains beautifully, but also carry a functional load. With the help of such tapes the curtain is kept rolled up.

In order to sew garters, you need to cut ribbons about 8 cm wide from the fabric. The length of the ribbons is determined by the formula 2x + 30, where x is the height of the window.

The cut ribbon must be folded lengthwise with the front side inward and stitched along one long side and one short side. Then you can turn the tape inside out, sew up the remaining open short side and iron it.

Watch the video on how to make roller blinds with your own hands, which shows all the main stages of work:

Installing roller blinds with your own hands: fastening mechanism (with video)

Before you start sewing curtains, you should attach the finished roller or rod. Decide on the location of the curtain - inside or outside the window frame.

The brackets are mounted at the edges, on top or in front of the frame. One bracket should have a hole for a round pin (it is placed on the right), and the other should have a square hole (it is installed on the left).

The staples are leveled using a building level so that the curtain rises strictly horizontally.

If you plan to install the curtain inside the frame, the bracket is placed below the top of the curtain by about 3 cm. If the curtain will be mounted outside, the brackets are attached 5 cm above the window.

Measure the distance between the staples and cut the roller to the desired length. After this, it can be secured.

On finished rollers you can often see a straight line drawn on the surface of the roller along its entire length. If there is no such line, it needs to be drawn. This line is needed in order to avoid skewing the panel, and you can use it to guide you when attaching the finished curtain to the roller.

To attach the curtain to the roller, you need to lay the blank on a flat surface with the front side up. Place the roller at the top of the curtain parallel to its edge. The edge of the fabric is wound onto the roller and aligned according to the vertical line drawn on it. The fabric is fixed with a special adhesive tape or nailed with small nails at intervals of 2 cm.

Pay attention to the photo - when attaching roller blinds, the prepared garters are thrown over the roller and fixed in the center of their length:

Their ends should be longer than the curtain panel. The ties can be sewn on or secured using a furniture stapler.

After wrapping the fabric tightly around the roller, you can set the roller in place by inserting it into the brackets. Check how the curtain stretches and whether it can be opened and closed completely.

The video of attaching roller blinds shows how to mount the structure:

How to make roller blinds with a figured edge with your own hands (with video)

Here you will receive step-by-step instructions for making unusual roller blinds with your own hands.

Roller blinds look impressive on their own, but you can give them an even more original look. Thus, roller blinds with a figured edge always decorate the interior and always attract attention.

To enhance the effect, their edges are emphasized with braid, piping or fringe. These curtains are made in the same way as regular ones, with straight edges, but one detail still distinguishes them from standard curtains. The weight tube cannot be secured along their edge, and therefore it is placed higher, and the drawstring is placed on the upper edge of the figured hem.

The edge of the curtain can be designed in the form of waves, teeth, zigzags, etc. Additional trim will emphasize the curly edge and draw attention to the curtains. For straight lines, braid is used, for curved shapes, flexible braided braid or tape is used.

To form a wavy edge, the fabric must be double-layered. There is no need to hem the edge - it will not fray due to the reinforcement of the fabric with a double-sided adhesive pad. You can use edging (before gluing the hem) or fringe and braid (they are glued to the finished panel).

To work you will need:

• fabric for curtains;
• kit for installing roller blinds;
• paper template;
• plate or pattern;
• pencil, thread, chalk and ruler;
• double-sided adhesive pad;
• fabric glue, fringe or braid (optional).

The fabric is cut in the same way as regular roller blinds. The only difference is a 25 cm allowance for finishing the edge.

To make the edges smooth, you will need a template, which is made of paper and corresponds to the length of the roller minus 1 cm. The width of the template will correspond to the height of the carved edge. First, a rectangle of the appropriate size is cut out of paper, and then the intended pattern is created on it.

As a rule, the edge is decorated with elements of the same size. You should first divide the width of the curtain in accordance with the desired number of elements. And the same amount is transferred to the paper template.

The paper rectangle needs to be folded like an accordion, draw the intended pattern on the first section of the template and cut all the other sections along it. Before transferring the design to the fabric, check that the elements are correct.

In order to make a drawstring, lines are drawn on the wrong side of the fabric. Stepping back 5 cm from the bottom edge, you need to cut a lining along the width of the curtain, 20 cm long.

The interfacing is placed over the marked line and attached to the fabric. The protective strip is removed from the surface of the gasket, the allowance is folded along the upper edge of the gasket and ironed. Thus, the layers of fabric are firmly held together.

A stitch is laid along the open edge, and another one is 2 cm below the first one. A weighting tube is inserted into the resulting drawstring, and the holes are sutured. The paper template is laid out under the drawstring and secured with pins, its outline is outlined with chalk, and the edge of the canvas is cut along the intended line. Trim is glued or sewn along the bottom edge of the curtain.

After this, the fabric is fixed to the roller in the same way as a regular roller blind.

To better understand how decorative roller blinds for windows are made with your own hands, watch the video below:

Recently, roller blinds can be seen more and more often in private homes and city apartments. These products not only decorate the room, but they also make it cozy and beautiful. At first you may think that only a professional tailor can sew these products. This is not true at all. Anyone can make roller blinds with their own hands. This will require effort, curiosity, required material and knowledge of the work itself.

How to sew curtains with your own hands?

The first step is to create a pattern for the future curtain. There must be at least 2 such parts. The two cut pieces of fabric must first be basted. This is done using large stitches on the reverse side. The basted fabric is leveled and stitched on a sewing machine. After you have sewn three sides of the product, you should turn the product right side out. Then carefully sew on the fourth piece. It should cover the entire structure from above. The sewn roller blind blank should be thoroughly ironed and steamed with a hot iron and steam.

In order for the roller blinds to be constantly tensioned and not sag, you will need to install a special strip. For this purpose, the product has a special pocket. So, to install the rail you need to fold the bottom edge of the product and stitch it along the edge of the product. You will have a compact pocket, and the bar will be inserted into it. The rail on which the roller blind will be attached is made of natural wood- this is a block slightly smaller in size than the pocket itself.

Now we are laying out the material. We place the canvas on a flat table, place its upper part around the block, and then secure it with a furniture stapler. That's it, your blinds are almost ready, but to make them more attractive, you should show imagination and invention - You can additionally decorate the curtains with bright ribbons and any other decorative accessories.

Homemade curtain ties

Instead of bandages, ready-made tapes are usually used. Such products in large quantities are sold in haberdashery, but if you have imagination, you can make ribbons for decorating roller blinds yourself. For one product you need to take two oblong strips of fabric, then sew them from the inside out on three sides, the sewn part is turned right side out, and the fourth side is folded neatly and stitched from the outside. For one product you will need at least 2 garters, however, if the window is wide and large, then you need to sew at least four such products.

There is a lot of information on this topic on the Internet. An educational film will help you to make roll structures with your own hands., where all stages of the work are clearly and in detail described. So, we have made a garter, now, using a construction stapler, we attach it to a wooden beam. We assemble the lower part of the curtain into an elegant bow or knot; this design will give the interior of the room an atmosphere of simplicity and ease. Sometimes ties for roller blinds can be replaced with nylon cord, but you can also use other materials at hand.

They should strengthen the curtain structure well when it is closed. So, it’s not difficult to make roller blinds with your own hands, they will help create coziness in your home, perfectly complement the design of the room, and go well with window blinds. This design will lift your spirits and become your pride and delight to the eyes. Things made by yourself with your own hands are truly unique, their design is original, it conveys warmth from the hands of the master, his inspiration and imagination.

Today you can find a wide range of different types of rolled products on sale. Different styles and directions are embodied in the design of the curtains; they are simply irreplaceable for decorating the interior of a room. Everyone is well aware of the saying: “There are as many opinions as there are people in the world.” This really applies to choosing roller blinds for your windows. Our eyes are simply blown away by the variety that manufacturers offer us. The main thing here is to know what you plan to achieve when decorating the interior of a room or premises.

If you are practical, you care about how your home will look, then you should pay special attention to such a product as roller structures, they are somewhat reminiscent of blinds. Their structure will help protect the room from prying eyes and create a pleasant twilight in the room. A product of this design easily lets the sun's rays into the room. You can additionally install blinds with them; their design allows you to completely or partially close the window.

Roman roller blinds

Roller blinds are somewhat reminiscent of blinds in design; they can easily replace conventional products classic type. The design of the curtains will create freshness, originality and novelty in the interior of your home. If you haven't found the necessary curtains, then you can make them yourself, with your own hands, with a little effort and diligence. To create such a design, you can use any materials.

This will require wooden blocks and various pieces of fabric. Master classes that can be found on the Internet describe in detail how to make roller blinds yourself. The most common type of roller blinds are Roman blinds. It is quite possible to make them yourself, only instructions and sequence of work must be followed.

For sewing you will need:

• haberdashery linen;
• construction stapler;
• liquid construction nails;
• special glue;
• tailor's scissors;
• portable sewing machine.

When constructing roll structures, glue is used. It allows you to complete the job without seams. But for the product to look beautiful and harmonious, an additional seam should be sewn. To do this, fold the fabric in half, into 2 identical parts, then tuck it along the edge of the product at least 2 times. The finished structure should be thoroughly ironed and stitched on top.

How to take measurements when creating roller blinds

Now let's start determining the fabric measurements. For curtains small size You will need a piece of canvas at least 108 centimeters long. Using a ballpoint pen and a ruler, we calculate the measurements on the wrong side of the curtains. Then we glue the crossbars with glue, which we place along the pre-drawn dotted lines. For this work, construction adhesive for fabric is used. The work must be done cleanly do not overuse glue, because when it dries it will harden and can be visible from the outside of the fabric. So, we have glued the material, now we need to carefully straighten it so that there are no folds on the product, then we glue the slats onto it.

Decorating a room with roller blinds will not leave anyone indifferent; their smooth and symmetrical folds will give the room a strict, conservative look. This design will not only decorate the room, but also serve as good protection from bright sunlight, and at night it will completely hide the room from prying eyes. To create them you will need very few materials. This:

• several pieces of fabric;
• special glue;
• wooden slats;
• paper with a sticky layer;
• electric iron;
• stapler;
• small hammer;
• construction nails
• measuring tape;
• push pins.

This material is quite enough to make curtains yourself, and By showing imagination, invention and using available materials, you can make exclusive and original curtains.

Roller blinds are suitable for those who appreciate simple shapes, clear lines and laconic design. They cope excellently with the main purpose of the curtains - covering the window opening from the sun's rays and prying eyes, but at the same time they take up a minimum of space and do not overload the interior with an abundance of draperies, multi-layer structures, ruffles, flounces, puffs and other decorative elements. In addition, you can create unique roller blinds with your own hands - step-by-step instructions are included.

But before we tell you how to make roller blinds, let’s get acquainted with the principle of their operation. Like everything ingenious, the principle of their design is as simple as possible: a smooth fabric with a sewn-in weighting agent is hung on a window and, when the cord is tensioned, it is simply wound onto a drum.

Advantages of roll structures:

• The window opening is tightly closed, eliminating the possibility of looking into the room from the outside.
• Can be mounted on a regular cornice, metal-plastic or wooden frame - in any case, such curtains take up less space than standard curtains.
• When mounted on a frame, they do not block access to fresh air when ventilating the room.
• They are suitable for any room and will be an excellent alternative to blinds, which many still consider to be an exclusively office decorative element. Fabric curtains look more comfortable and “homey”.
• Can be used either separately or in combination with other textiles - curtains, drapes, lambrequins, tulle.
• A huge selection of textiles and their colors allows you to find optimal solution for any interior style.

Fabric roller blinds can be installed separately on each sash

Roller blinds in various kitchen interior styles:

But such curtains also have their disadvantages. Unlike the same blinds, you can only adjust the direction and intensity of light by partially raising or lowering them - you can create light twilight only with the help of a special fabric with inserts of varying degrees of transparency. In addition, any textile absorbs odors and requires regular care - numerous washings, cleaning and ironing, especially when it comes to the kitchen. But the most significant drawback is malfunctions of the mechanism and frequent distortions of the fabric when opening/closing the window, so let’s look in detail at how the mechanism of roller blinds should work.

Types of structures and lifting mechanism

The main element of roller blinds is a rod with a round cross-section that collects the fabric into a roll, and a decorative cord or chain, the tension of which drives the roller. The curtains are held in a straightened state using a weighting agent, and when folded they are secured with garters or other decorative elements. Depending on the type of structure, the rod can simultaneously play the role of both a load and a roller if it is placed below, or it can be attached to a cornice or frame.

Although the operating principle of all roller blinds is the same, their designs may vary. additional elements, whose purpose is to improve appearance or provide more comfortable operation. Perhaps the most practical addition is the use of special guides or magnetic tapes, which eliminate distortions and gaps when operating the curtains. A closed box in which a roller with a fabric roll is “hidden” also looks good - in addition to its aesthetic function, it also protects textiles from various damages and dust accumulation.

Curtains with a closed box are called cassette curtains

The lifting mechanism control systems also differ:

• Chain - adjustment of roller blinds is carried out manually using a regular cord, rope or plastic chain thrown over the drum and attached to the lower edge of the curtain. When the cord is pulled, the roller begins to rotate, winding or straightening the curtain. But to hold the canvas you need to additionally use clips, garters or other holders. Despite the simplicity of the device, such a system is considered the most reliable and affordable.

Chain mechanism – simple and durable

• Spring - the system is installed at the top or bottom of the curtain and closes quickly when the spring straightens. In this case, the material is fixed automatically and does not require additional manipulations with the holders. True, springs wear out quickly and require frequent replacement.

Fabric roller blinds with a spring mechanism can be installed both at the top and bottom of the window

• The electric drive system is the most expensive and difficult to operate system, but the easiest to operate. The fabric in such curtains is rolled up by an electric motor, which can be started remotely or by clicking a switch button. This lifting mechanism simply irreplaceable for large and high openings, on ceiling or roof windows.

Diagram of electric curtains

The simplest mechanism for roller blinds with your own hands can be made from a round block of wood or a metal rod, equipped with a cord or a plastic chain, which can be purchased along with mounting hardware. But if you want more functional curtains - spring or electric, then it’s worth buying ready-made system and attach the material you like to it.

On a note! Roman blinds are also often called roller blinds. But this is not entirely correct. When closed, they are really similar, but when lifted, the rolled structures wind the fabric onto a shaft, while the “Roman” ones gather into horizontal folds.

Materials for practical curtains

You can make roller blinds with your own hands from wooden planks or thin bamboo slats. This material does not fade in the sun, reliably protects from light and is resistant to mechanical damage. But it has two significant drawbacks: noise effects in drafts and impressive weight (even light bamboo requires deep holes to securely fix the structure - adhesive tape will not hold it for long). In addition, despite all the environmental friendliness and natural beauty of wood, such diversity color solutions like textiles, it cannot boast.

Therefore, the most popular materials for roller curtains are fabrics: polyester, linen, cotton and nylon. Combined fabrics have also proven themselves to be excellent - fiberglass, polyester with the addition of viscose, satin or cotton, screen (polyvinyl chloride with fiberglass). All these fabrics are quite practical, easy to wash and last a long time. You can choose any shade and ornaments, depending on the style and color scheme of the room.

It is worth paying attention to the degree of transparency - thin fabrics that transmit light well are suitable for the living room, kitchen and office. But for a bedroom or nursery, it is better to give preference to thick curtains that will reliably protect sleep from the bright rays of the morning sun, the light of lanterns and the glare of headlights at night.

Blackout curtains - best protection from bright light

Important! Please note that when the curtain is lowered, its reverse side is visible from the street. Therefore, it is worth choosing double-sided fabric, or sewing two single-sided layers into one fabric.

Types of fabric roller blinds according to the degree of darkening of the room

Fabrics with light effects:

• Transparent and translucent fabrics (cotton, satin, silk) scatter the sun's rays well, but do not darken the room well, so for rest rooms it is advisable to combine them with thick curtains or drapes.

Transparent and translucent roller blinds will protect from prying eyes during daylight hours when the lights in the room are turned off

• “Blackout” - light-proof textiles with complete blackout are ideal for bedrooms, attic or ceiling windows, and home theaters. Such curtains will provide ideal relaxation even on a sunny summer day.

“Blackout” – fabric with a complete blackout effect

• “Dimout” – blocks light by 70%, therefore it is considered a universal solution for the bedroom, living room and nursery. But for the kitchen, where it is important good lighting during the day and do not require complete blackout at night, it is better to choose a thinner fabric.

Dimout: medium dimming

• “Day-night” or “zebra” - this textile is created by alternating matte and transparent stripes, which allows you to adjust the degree of darkness in the room according to the principle of blinds.

Roller curtains made of fabric with a day-night effect

Important! Roller blinds for the kitchen can be made from fabric impregnated with special compounds that reduce the absorption of fat, odors and other cooking costs. For living rooms, curtains with an antistatic effect are suitable, repelling dust and reflecting heat. Such textiles help create an air layer near the glass, which traps the cold in winter and the heat of the sun's rays in summer. But for impregnated fabrics, dry cleaning only is recommended.

In the kitchen it is better to use fabrics with dirt-repellent impregnations.

Sewing curtains yourself is a real savings when decorating a room, because on each window you can win about 2-3 thousand rubles (compared to ready-made models). Therefore, we will consider in detail how to make roller blinds with your own hands.

Correct measurements are the key to success

In order for roller blinds to tightly cover the window, it is important not only to carefully measure the parameters of the opening itself, but also to take into account the following nuances:

• Decide on the area that the curtain should cover - it can be the entire opening, just the glass, or individual flaps (the latter option is convenient for ventilation, but more labor-intensive to implement).

Options for attaching roller blinds to windows

• The length of the fabric cut is calculated as the sum of the height of the window (or opening), an allowance of 3-4 cm for processing cuts and 15 cm for “pockets” for the rod and weighting material.
• For the width of the canvas, measurements are taken of the glass or frame plus an allowance of 3-4 cm (15-20 mm on each side) for bends.

Measurements for a curtain covering a window opening

Materials and tools for work

To make roller blinds with your own hands and assemble the structure practically from scratch, you will need the following set of tools and Supplies:

• An aluminum rod, a piece of cornice or a wooden beam with a circle cross-section of 2.5-3 cm is the future roller onto which the canvas will be wound. It is important that its length is approximately 1.5-2 cm less than the width of the fabric (seam allowance).
• Mounting to a frame or window opening, for example, a wooden strip with a pair of self-tapping screws metal corners for a regular frame or double-sided tape (option for a plastic window).
• Sewing machine and threads.
• Cut the fabric according to the measurements taken.
• Velcro or teasel tape along the length of the plank.
• Plastic/metal rings and a decorative fastener (silk, satin ribbon or decorative cord), the length of which is 3 times the length of the curtain.

On a note! The manufacturing process can always be simplified: buy a ready-made mechanism with a drum, brackets and a chain at a hardware store and attach to it with adhesive tape fabric processed in the studio according to your measurements (some rollers already come with special Velcro). This way you can create a unique curtain design according to your project with a minimum of labor costs.

Accessories for roller blinds

Step-by-step instructions for sewing curtains

After taking measurements and preparing everything necessary for work, you can begin assembling the curtain itself. It is most convenient to do cutting and sewing on a flat and smooth surface - a tabletop, a wide ironing board or the floor.

Roller blinds with your own hands - detailed master class:

1. The fabric is cut according to pre-made measurements. If this is a material with a one-sided pattern, you need to sew two cuts with the right sides facing each other along the length and on one side in width, then turn the resulting “bag” inside out and sew it up. If the canvas is double-sided, it is enough to process the edges taking into account the allowance. After this, the fabric is steamed with an iron, paying special attention to the corners.
2. At the bottom of the future curtain you need to baste a “pocket”, place a weighting agent in it and then stitch it on a typewriter, closing it on all sides.

On a note! If the curtain material is not impregnated with any by special means and is not intended for dry cleaning, you should take care of how to remove the weight before washing. The simplest option is not to sew the “pocket” tightly, but to close it on one side with a small zipper, buttons or hooks.

1. The wooden holder can be wrapped in fabric, secured with a furniture stapler or thread and needle. The second option is to simply glue one part of the teasel tape to the front side (the second needs to be sewn to the top edge of the curtain).

On a note! If the process of making a homemade holder seems too long, you can always replace it with ready-made fasteners and a cornice pipe on which the fabric is placed.

1. Hooks are screwed into the wooden plank, to which a ribbon or decorative cord is tied. The fastener is pulled along the length of the fabric, brought out through rings sewn to the top of the curtain, and secured to a hook screwed into the wall. When the cord is pulled, the curtain will roll onto the roller.

Curtain with decorative cord

Important! In order for the fabric to be easily collected into a roll, the rings should be suspended at a distance of 15-20 cm from the sides and 5-7 cm from the bar. For this, 2 narrow strips of fabric are used, which are sewn to the top of the curtain. Another option is to make through holes in the fabric itself and close them with decorative eyelet rings. In this case, you can use two ribbons instead of a long cord, tying them into beautiful bows.

1. Now you need to hang the holder on the window. To do this, attach a strip wrapped in fabric to the frame, glass or window opening. To mark the mounting location, it is advisable to use a level so as not to spoil the appearance of the structure. IN wooden frame holes are drilled for self-tapping screws or corners are attached to metal-plastic windows You can use double-sided tape or special plastic fasteners.

Attaching roller blinds to plastic windows

1. All that remains is to combine the two parts of the teasel tape and hang the fabric with the weighting agent on the decorative strip.

On a note! If the roller blind unevenly unfolds, you should replace the bottom bar with a heavier one.

Video manual for making fabric roller blinds

To ensure that your handmade roller blinds fit harmoniously into the interior of the room, use the designers’ recommendations.

1. For rooms facing south or east, fabrics from cold colors. Emerald, turquoise, violet, ash pink will bring a little coolness and dispel the blinding light. But it is better to decorate windows on the north and west sides with curtains in warm colors.

Cold and warm shades of colors

1. It is desirable that the color of the fabric be either darker or significantly lighter than the walls, otherwise the curtains will be “lost” against the background of the decoration.

Bright curtains will be an excellent accent element

1. When choosing an ornament, you should not copy a pattern that is already present in the interior - choose a similar one in shape or color. But if the pattern is applied to the entire surface of the walls, it is better to choose monochrome curtains, but in one color scheme with decoration or other interior elements.

Spectacular striped pattern of curtains “Day-Night”

1. Although the design of roller blinds is quite laconic, it can be diversified using various decorative elements, for example, lace, flounces, fringe, playful bows, metal chain. Even a weighted rod can be an interesting accent for window decoration.

Forged rod as a weighting agent

1. For living rooms, you can use various combinations, combining roller blinds with both thick curtains and transparent organza curtains and veils. Or you can limit yourself to a spectacular lambrequin - it all depends on the interior style and your personal preferences.

An interesting ensemble of roller blinds and curtains:

1. If you want to turn a window into an original picture, then remember the photo printing technique - with its help you can apply any design to the fabric.

Fabrics with photo printing will be the highlight of the interior of any room.

Roller blinds – perfect solution For modern interior. We hope that our tips helped you not only decide on the color and model of the lifting mechanism, but also inspired you to create your own. If self-tailoring doesn’t appeal to you, you can always buy finished model or order your favorite curtain design from the masters.