What kind of curtain rod do you need? Curtain rods and accessories: which ones are best to choose?

A strange question, you say - of course, only the cornice that is better. Fair point. But each person has his own requirements for the best and his own criteria for selecting it. So let's first define the problem more specifically. So…

Where does the need to choose a new cornice come from?

When does it become necessary to select and purchase a new curtain rod?

Personally, only a few banal options come to mind:

The first one is the most understandable to me- the renovation was completed, I wanted a complete renovation, everything old was thrown into the trash, new curtains were bought to match the color of the freshly painted walls and certainly match the color of the new sofa, but bad luck, the old cornice was thrown into the trash and there was nothing to hang the curtains on. Even a shiver ran down my spine from such a thought - there was nothing to hang the curtains on! We'll look for something to hang it on.

Second case– You wanted low-budget, but visible and, most importantly, quick changes in the interior. The easiest way to quickly transform your home is to replace your old curtains with fresh ones. But the old cornice, bastard, does not fit the new curtains. We need to look for and choose a new one. We will look for the right one.

Another working option- the search for the cornice is associated with its breakdown. And here’s an example - a neighbor came in the day before, well, we sat for a while... then a little more and it was already long after midnight, with the help of the curtains he got up from the table, it was already time to go home, because he had to go to work tomorrow. Yes... the cornice turned out to be rather weak. We told you, buy iron! We'll look for a strong one.

And finally- your cornice is not in fashion now. For men, this is an exclusive option; usually such words make them smoke nervously (even if they are not smokers), and sometimes they can shed tears. For fair half of humanity, this is a very real case. Well, let's look for a fashionable one.

The problem has been identified. We need a curtain rod that is new, suitable, strong and fashionable. Now let's figure out how to choose it correctly.

What types of curtain rods are there?

To begin with, I will briefly describe the options from which we will subsequently choose.

There is no generally accepted classification of curtain rods. Therefore, I divided the cornices by type, using their main, and most importantly, significant differences.

What kind of curtain rods are there depending on the material?

Curtain rods are made from three main materials - wood, metal and PVC. The same goes for combinations of these materials.

Wooden curtain rods

This type is the oldest and therefore the most proven method of attaching curtains. Typically, pine, linden, walnut, less commonly oak, beech and cherry are used to make wooden cornices.

The advantages of wooden cornices include

their environmental friendliness, for many people this is the most important factor when choosing a cornice
attractive - natural appearance, wood goes well with most materials and styles in the interior
long service life, subject to proper use conditions

The disadvantages of wooden cornices include:

limited options for attaching curtains to the cornice - a wooden cornice, as a rule, has a tubular shape and not all types of curtains can be attached to a pipe
the tree is quite heavy, which will require reinforced fasteners for the cornice
wood does not like moisture and temperature changes - under their influence it can change size and shape, crack or swell
high price - natural wooden cornices have a far from budget price

Curtain rods made of metal

Cornices of this group can be made of different metals. Aluminum and duralumin are used in the production of budget models. For more sophisticated cornices, bronze, steel, and chrome-plated steel are used.

Advantages of metal curtain rods

exceptional strength and durability
ecological cleanliness
good appearance of the product and ease of care
good aesthetic compatibility with any materials in the interior
metal curtain rods have different types of profiles and, as a result, have a variety of options for attaching curtains to the cornice

Disadvantages of metal cornices

Heavy weight, especially models made of bronze and products made by forging. The large weight of the cornice will require strong supporting structures to which the cornice will be attached. For example, attaching a bronze cornice to a plasterboard wall will not work without additional effort.
High price - yes, you will have to fork out for good quality.

Cornices made of polyvinyl chloride (PVC)

Plastic curtain rods are made of artificial material– polyvinyl chloride. If the product was manufactured at an official enterprise and has a quality certificate, then with a high probability such a curtain rod will not harm your health. And, if the product does not have documents confirming its origin, you should think about whether you can bring it into your home. When purchasing, pay attention to this.

PVC cornices often imitate cornices made of expensive materials- wood and metal. You can save a lot of money on this.

Advantages of plastic curtain rods

The greatest variety of shapes, types of available profiles and abundance of colors among other types of cornices.
Light weight and easy installation.
Low price– PVC cornices are the cheapest in the category.

Disadvantages of PVC cornices

Artificial origin, low class of environmental cleanliness, especially compared to competitors made of wood and metal.
They are highly flammable and, when burned, release pharmaceuticaldehydes that are toxic and dangerous to humans.
Quite fragile, many types, especially tubular ones, have a weak load-bearing capacity. Hanging a heavy thick curtain on such a curtain rod will not work; it simply may not hold up and break.

What types of curtain rods exist depending on the type of structure

The design of the curtain rod will ultimately affect its durability and finish appearance. In this troupe I have identified the following subspecies:

Tubular cornices

In such cornices, the main element of the supporting structure is a pipe. Pipes can be made of any material - wood, metal or plastic. The curtain is hung using special devices attached to the cornice pipe. For example, these could be rings, loops or eyelets.

Tubular cornices can have different pipe diameters. Depending on the material of the cornice, the diameter can be from 10 to 40 mm.

A tubular cornice may consist of one or more (usually no more than two) rows of pipes. In double-row cornices, one pipe is used for hanging curtains and the other is used for fastening curtains. In addition, in double-row cornices, the pipes may have different diameters, for example, the pipe for attaching curtains will be thinner than the main one.

Tubular cornices are self-sufficient in terms of design and do not require additional decoration of the façade. The decor is used only on the side ends of the pipes. These can be balls, cubes, petals and similar elements.

When choosing a tubular cornice, it is better to choose models in which the pipe fits freely into the mounting bracket and can be easily removed. But models in which the pipe needs to be threaded into the bracket ring are not convenient both during installation and when removing curtains.

Advantages of tubular cornices

simplicity and reliability of design
high strength (except for PVC cornices)
original and laconic design

Disadvantages of tubular curtain rods

Limited number of options for attaching curtains to the curtain rod
Quite massive size and significant weight

Cornices with guide profiles

This type of curtain rods “carries” the curtains using special profiles - guides, to which the curtain fasteners - hooks, hangers or rings - are attached. Professionals also call such curtain rods bus bars. But this name reminds me of car tires, so I will call them more clearly, so to speak, profile tires.

The guides of profile cornices can be arranged in several rows, which allows you to make multi-layer curtains. The profile can be made of metal or plastic. There are flexible profiles that can be given any shape. Profile cornices may contain additional elements, which serve to round corners along the edges of the cornice. Attaching profile cornices usually occurs to the ceiling. Although there are wall-mounted models, they will require special brackets.

Profile cornices require additional decoration in the front part. Usually the profile is hidden behind a hanging molding or hidden between the ceiling levels.

Advantages of profile cornices

They have a variety of fasteners for hanging curtains
Contains several rows for attaching curtain panels, while having a compact size and light weight
Flexible models available
They don't have a high price

Disadvantages of profile cornices

Requires additional decoration
Limitation on the possibility of attaching the cornice. Usually can only be attached to the ceiling.

String cornices

Lately they are quite rare. In string cornices, the supporting element is a metal string or a thin metal cable tightly stretched on the guides. Elements for fixing the curtain are attached to the string. The strings can be arranged in several rows.

The main disadvantage in my opinion, the difficulty of installing such cornices is. To the advantages I would attribute their compactness and original appearance

Baguette cornices

This is another group of cornices that are similar in design. Some kind of two-in-one option. Baguette cornices are already equipped with a decorative front panel. Often, a baguette cornice, in addition to the front part, also covers the side walls of the structure with decor. The curtain is framed like a painting. But for hanging curtains, a baguette cornice can contain both profiles with guides and pipes. The baguette cornice can be either single-row or multi-row. In my opinion, the baguette option will suit classic interior styles. It is unlikely that it will be appropriate in an interior in high-tech or minimalist styles.

Advantages of baguette cornices

They have an aesthetically finished appearance and do not require additional decoration
Can contain one or several rows

Disadvantages of baguette cornices

Have significant weight
Not very easy to install
Have a higher price
Suitable only for certain interior styles

Mini curtain rods

This type of curtain rod is attached directly to the window frame or very close to the side edges of the window. They are mainly used for kitchen curtains. Like cafe curtains. Such curtain rods usually have a tubular design and are made of either metal or wood or PVC.

Advantages of mini curtain rods small size and light weight

Disadvantages of mini curtain rods limited scope, usually used only in kitchens or for door decoration

What kind of curtain rods are there depending on the method of their installation?

Cornices that are attached to the ceiling
Cornices with wall mounting

The choice of cornice according to this criterion depends primarily on the strength of the supporting structures in your room. If your room has a suspended ceiling or a plasterboard ceiling, it will be easier to attach a wall cornice.

Which curtain rods can be distinguished by the type of curtain movement control

Here I mean how you will open and close the curtains. Are there mechanical or electronic devices in the curtain controls? Based on this feature, three groups of cornices can be distinguished:

manual curtain rods opening the curtains - I took the canvas with my hand and pulled, that’s the whole mechanism
mechanically controlled curtain rods- when the opening occurs using mechanisms that are mechanically controlled. For example, by turning a cane or pulling a chain or cord
cornices with automatic control . curtains are opened by an electric motor, which can be controlled from a remote control

We can finish describing the species here. Now you have an idea of what kind of cornices there are. you can move on to the main criteria that should be used to the right choice cornice.

How to choose a curtain rod. What to pay attention to

To make it easier for you to understand, I did step by step instructions about how to choose a cornice

The first step is to assess what kind of curtains there will be

Obviously, you need a curtain rod to hang curtains. Therefore, first of all, you need to understand what specific curtains you plan to use, namely:

proposed curtain model - what elements will be used in the curtain composition - lambrequins, tiebacks, etc. ()
number of rows in the curtain composition - one or several
the splendor of the curtains (the number and volume of folds on the curtains)
the total weight of all curtains and their decorative elements. The type of material and type of cornice design depend on the weight of the curtains
the expected width of the curtain composition, for example, along the width of the window or along the width of the wall. Do not confuse it with the width of the curtain fabric.()

Step two - choose the size of the cornice

First a couple of notes

We are accustomed to the concept of width when we talk about the width of a window or the width of a wall. The cornice has this parameter usually called length.
Standard size the cornice is up to three meters long. If you need a longer curtain rod, it can be extended. For this, there are special joining profiles that allow you to connect several cornices into one. Do not forget that if the length is large, you will need to purchase additional mounting brackets to additionally secure the cornice and protect it from sagging. The optimal distance between mounting brackets is 1.0 -1.2 meters
Another important point . The cornice has a working area within which curtains can be secured. In some models, for example tubular ones, this zone is smaller than the length of the cornice itself due to the fact that part of the cornice is occupied by a fastening bracket.

So, based on the above, the required length of the cornice will depend

from the width of the curtain composition you selected in the first step.
from the size working area cornice

In general, the total length of the cornice should be greater than or equal to its working area

The third step is choosing the type of cornice

At this stage, all that remains is to choose the cornice according to the type of material and design. I have already described all the options above.

If the weight of the curtains is significant, it is better to use models made of metal or wood
If several rows of curtains are expected, then profile versions of curtain rods are preferable
If you want to minimize the space that the cornice takes up, use ceiling models of profile cornices
If you have an unusual window shape, you can use flexible rail curtain rods

Which curtain rod is better?

The answer to this question depends on your case and your requirements. The best one for you will be the one that matches your curtains. We have already discussed all the nuances of choice above. And if you look at the question conceptually, you can create a micro rating - best in category. So:

Best for price- these are curtain rods made of PVC
Best in strength- of course, metal models are in the lead here
Best in Design- metal is again in the lead and there is little room left for wooden tiles
The easiest- string cornice
The most multi-row- profile models
Most flexible tire cornice
The most fashionable- the one that suits the style of your interior. If you blindly follow fashion, you will have to change something in the interior along with changing the cornice

Video review about types of curtain rods

Now you can consolidate the material you read above. I suggest watching the video story, which will finally answer all remaining questions about the cornices.

What types of curtain rods are there? photo

Finally, a small selection of photographs from various cornices. They look quite inspired.

Windows in residential and administrative premises are one of the most important parts that shape the design style of the premises. And their appearance is formed by curtains and cornices. In this part we will talk about what curtain rods can be.

Types, types, installation methods

Even such a simple design as cornices has many types. Now we are not talking about appearance, but about design, installation method. In general, about the technical details.

By installation method

First of all, curtain rods differ in the installation method. There are wall and ceiling ones. The choice depends on your desire and type of ceiling. The load-bearing capacity of the walls is usually sufficient to attach a cornice even under heavy curtains. Problems can only arise if the walls are made of cellular concrete or covered with plasterboard. But for such situations there are standard solutions - the use of mortgages, chemical anchors or special dowels.

Situations with ceilings are different. There are no problems with standard ones, but with tension or suspended ones you need to think in advance. In the case of tension curtains, a ceiling cornice for curtains is usually used, and a structure with sufficient load-bearing capacity is constructed from a wooden block or metal guides to attach the ceiling sheet.

And it’s not even possible to install a cornice on all suspended ceilings. You can attach it to drywall, but the drywall itself may not be able to withstand heavy curtains. This is only possible for light tulle-type curtains. For heavier fabrics, wall cornices are used or ceiling cornices are attached, but to the ceiling itself.

For suspended ceilings, string curtain rods are usually used, which are mounted to the ceiling

Other types of suspended ceiling -, etc. - are not able to bear any extraneous loads at all. The best way out is to install a mortgage during the renovation, before installing the ceiling - an additional profile or wooden block, well fixed to the ceiling. Then attach the curtain rod to it.

We install fasteners that are reliable and frequent, with the expectation that it will bear a constant load of several kilograms, plus sharp jerks when closing/opening the curtains. So we don’t skimp on fasteners.

Type

In addition to the method of fastening, curtain rods differ in shape. There are:

Tubular. They are usually round in cross-section, but square ones have also appeared. A traditional type of curtain rods, known since ancient times. They are also called “round cornice”. Their peculiarity is that they are part of the decor, so when choosing, you also need to select the design. According to the mounting method, there are wall and ceiling (rare). There is also such a variety as rotary tubular cornices.
Three-row tubular cornice made of metal, plastic, wood - the most common options
Strings. They are a set of two brackets, between which several steel strings are pulled. They can be mounted on walls or ceilings, but ceiling models are more common. String cornices are inexpensive. Unnoticeable, can be hidden or open mounted.
Profile or rail. For these cornices, a special profile is made, in which one, two or three grooves are made. Runners are inserted into these grooves, to which curtains and tulle are attached. If you need to open/close the curtains, pull them and the sliders move along the groove. According to the type of execution, profile curtains are:
Baguettes. It is rather a variation of all of the above. A baguette cornice for curtains has a front decorative strip (baguette), which covers the cornice itself, no matter what type it is: tubular, string or rail.
Baguette cornices - any type, covered with a decorative strip

In general, these are all types of curtain rods. Deciding on the type is not so difficult - your preferences and wishes are important. Next you will have to look for a model that is suitable specifically for your case and according to your needs. technical specifications(yeah, there are those), and in appearance.

Which ones are better

It is wrong to say that some type of curtain rods are better and some are worse. Everyone is good in their own way, and everyone has their own shortcomings. You need to select the type of curtain rod based on several criteria: the design of the room, the type of window and curtains, the desired effect.

For example, for laconic curtains without a lambrequin, any type of cornice, including tubular or rail, is suitable. Tubular ones are more suitable for rooms with high ceilings or, at least, where the distance from the top of the window to the ceiling is more than 20 cm, or better - 30 cm or more. Otherwise, they don't look very good.

For curtains with lambrequins, tubular ones are not very suitable, as they stand out too much, in addition, this type of curtain in combination with pipes and rings does not look “very good”. For lambrequins, a rail or string option is more suitable. In this case, the cornice itself is hidden, so its aesthetic value does not matter. For some styles, a baguette option will look better.

Curtain rods: determining the parameters

First of all, you need to decide on the length of the cornice. The choice depends on whether you want to visually enlarge or reduce the window opening and on general illumination rooms. If you don’t need to enlarge the window, there is plenty of light in the room, curtain rods are taken either equal to the width of the window opening or a little more. The fact is that if you buy tubular curtain rods as a set, they come in standard lengths: 1.6 m, 2.0 m, 2.4 m, 3.0 m. Therefore, you have to take the nearest larger one. The solution is to look for stores that sell pipes by the meter. There are those too.

If you need to let in as much light as possible into the room or want to make it visually wider, when open, the curtains are placed on the adjacent wall on the right, left, or on both sides. Depending on the density of the curtains and the number of folds, this requires from 30 to 60 cm on one or both sides. Therefore, to calculate the length of curtain rods, add 60 or 120 cm to the width of the window (more/less is possible, depending on your desire). Then the task is to find the given length of the cornice, or close to the found figure.

What curtains are they for?

Before you finally choose curtain rods, pay attention to what kind of curtains they are intended for. The description usually says “for light and medium” or “for light, medium and heavy curtains.” The last option is universal, with correct installation withstands any load.

If you have chosen metal curtain rods, you don’t even have to look at the specifications: they will withstand anything. But you need to be careful with plastic and wood. Quite a few models are only for medium curtains.

Number of rods (pipes)

You also need to choose how many rods/pipes/lines you need curtain rods for. It depends on the type of curtains. There are:

Single ones are used if only tulle or curtains are hung. Double - if both components are required. Triple cornices are needed for models with lambrequins. With this, perhaps, everything is clear and problems can only arise if you decide to replace the curtains. If one string/pipe turns out to be superfluous, this is not a problem, but if there is a deficiency, the cornice usually needs to be replaced.

Tubular curtain rods: types, photos

They are made from metal, plastic and wood. Metal tubular cornices can be made of aluminum, bronze, steel and other alloys. There are round tubular cornices made of black metal or aluminum alloy laminated with a thin film imitating wood species. These are the cheapest of this category.

Pipe cornices - traditional way window decoration

Section: round or square

Basically, tubular curtain rods have a circular cross-section. This is a classic. But there is also a square section with corresponding square “rings” for hanging curtains. They look stylish and suit: art deco, loft, minimalism.

But how convenient they are to use, how well such “rings” will slide, that’s the question. Everything can be fine if the surfaces are perfectly sanded and adjusted. If there are even the slightest irregularities... It’s easier in this regard with wooden curtain rods. They can be varnished. Then normal sliding is ensured. Although, no one bothers to varnish the metal...

Sales forms

There are two forms of selling curtain rods made from pipes. The first is a ready-made kit, which includes brackets, pipes, rings, and tips. This is how they usually sell wooden or plastic curtain rods, some metal ones.

The second form is everything separately. This is more typical for metal models. Buy a pipe of the required diameter and brackets. For curtains, a thicker pipe is usually used - 22 mm or more, for tulle - less. There are many different tips for decorating them. Different in price, shape... For thin, tulle-like ones, they take ordinary plugs, but for the first row you can choose something more elaborate (if such a decoration suits the style of the room).

With this form of sale, there are also several types of rings and clips for attaching curtains. They are also purchased separately. After all, these rings are not always needed, since there are ways to hang curtains without additional fastening - on eyelets or loops.

String cornices: installation methods and selection features

No one knows who came up with the idea of using metal wire to hang curtains, but many people liked the idea. It is inexpensive, reliable, and fits into any interior. Only with heavy curtains can problems arise: the wire may bend under the weight. Most string curtain rods are designed for light and medium weights. For heavy ones, you will have to look for another option.

String curtain rods can be wall or ceiling mounting. In any case, brackets are used, they just different types. When choosing, pay attention to the following parameters:

There are also string cornices for hidden and open installation. They differ in the decorative nature of the brackets. If the entire structure will be hidden behind a baguette, choose the simplest and most unpretentious one. Most often this is a regular bracket with several holes. It will still be hidden, so you only need to worry about its strength.

String curtain rods for open installation have a more sophisticated look. Typically this polished metal is white or yellow color, maybe with decorative elements. The selection principle is familiar: except technical parameters, is selected to suit the situation. Although the brackets are small, it is better if they do not conflict with the interior.

Profile or rail

One of the most interesting and diverse groups. Rail curtain rods can be made of metal or plastic. Plastic when good quality They behave well in operation, but are only suitable for light fabrics.

Metal ones are usually made from aluminum and alloys. In terms of reliability, they are good, but if the metal in the guide is poorly polished, closing or opening the curtains can be problematic. But this goes away over time: existing irregularities are smoothed out. If you want to speed up this process, you can arm yourself with very fine grain sandpaper for metal and smooth out all the errors. It should help.

Installation method

There are models of rail curtain rods for curtains mounted on the wall, and others mounted on the ceiling. Some can only be mounted on the wall or only on the ceiling, some have the ability to choose the installation method.

There is one more criterion for division: by appearance. There are profiles at all simple type, which are intended for hidden installation. It can be mounted on a base ceiling if a suspended or suspended ceiling is installed, or hidden behind a baguette (if wall or ceiling mounted, it doesn’t matter.

There are models for open installation. They are usually trimmed with decorative trim. They are attached to the wall or ceiling using brackets. The number of brackets is determined by the length - up to 3 meters, only two are needed at the edges, more - three are installed.

Corner profile curtain rods

Rigid cornices are not suitable for bay or corner windows. If for corner windows it is still possible to join two linear cornices, then this trick does not work with bay windows. Their line curves smoothly, many short sections have to be joined, which, to put it mildly, looks “not very good.” That's why flexible curtain rods are needed.

They bend perfectly in a horizontal plane. In this case, it is possible to use one or two large curtains rather than many narrow ones. There are three solutions for such windows:

When choosing, first of all look at what curtains this profile is intended for. Next, you should take into account that the prefabricated plastic corner cornice must be mounted strictly in one plane, otherwise the runners will get stuck at the joints. It is usually mounted on the ceiling, so it is desirable that it be without significant differences.

What is the main advantage of the ceiling? It makes it possible to hang long curtains from the very ceiling. Thus, the room visually appears taller than it actually is. With this device and long curtains, even a room with a low ceiling looks more spacious.

If you use a ceiling cornice with a baguette - a front decorative strip, neither the support rail attached to the ceiling nor the curtain hooks will be noticeable.

In addition, the ceiling cornice can be installed almost anywhere, even in a niche. The simplest type of ceiling cornice is. It consists of two support brackets, between which metal strings are stretched. The advantages of this type of cornice are low cost and ease of installation. The disadvantage is that the strings begin to sag over time and need to be tightened again. The string cornice is designed for a small load, so it is better to hang curtains made of lightweight material on it. Ceiling cornices can be used even if the windows non-standard shape.

In what cases is it better to mount a wall cornice?

If you have rooms with high ceilings, there is no need to visually enlarge them further. In this case, it is advisable to choose a wall cornice. Moreover, the design of such curtains is much richer and more varied than that of ceiling curtains.

You can easily choose a wall cornice for a room decorated in almost any style - retro, classic, modern, avant-garde, country, etc.

For example, for premises decorated in classic style, especially with the use of wooden panels, a wooden wall cornice is ideal. A metal cornice, especially one made using decorative elements (forged parts, curlicues), will go well with a modern or avant-garde interior. Well, the universal wall cornice, which can be used almost always, in any interior, is plastic.

The thickness of the cornice directly depends on the weight of the curtain. A light curtain will look bad in combination with a thick, massive curtain rod, and under the weight of a massive curtain, a curtain rod that is too thin may bend. Try to maintain a middle ground.

When choosing a cornice, take into account, first of all, the size of the room, and especially its height. It is necessary to use a device that best suits a given room, kitchen, can emphasize its advantages and hide its shortcomings - for example, low ceiling.

Sources:

how to install ceiling curtain rods

Every time we return home after hard work, we try to somehow have fun and relax. However, frequent stress can interfere with home relaxation. Did you know that active household chores, for example, replacing tired curtains, help you cope with stress faster? Indeed, a person makes some changes in the house, transforms the apartment. After some time, the stress goes away on its own. And since you decide to hang new ones, change the old boring cornice.

Instructions

The kits usually come with special brackets, which are parts that allow you to fix the rod at the desired height. If there are no brackets, you can make them yourself or replace them with corners. If you attach it to the corners, it will hold. But this design does not look entirely aesthetically pleasing.

Before you start fixing the cornice, decide whether it will be installed, on or suspended between opposite walls. Now make sure that the cornice will not interfere with the opening of the window. It should be 10 cm higher from the window and so that the curtains do not come into contact with the radiator or window handles.

There are also special models designed for installing Roman shades or blinds.

When choosing a frame, you need to focus not only on its appearance, no matter how well it combines with the design of your home. It is necessary to take into account the method of fastening and some other parameters. Since cornices are installed on certain parts of the room, such as ceilings or walls, a choice of parameters should be made before finishing begins.

Before choosing the cornice itself and the mounting method, you must first take measurements. In this case, the following nuances should be taken into account:

The cornice should be placed at least 5 cm higher than the window opening. This way it won’t interfere with opening the windows;

The cornice should be moved away from the wall so that the curtains that are hung on it do not touch the radiators, window handles and the edge of the window sill. If you plan to hang curtains in several layers, measurements should be taken from the layer closest to the window;

The shortest length of the cornice should be chosen so that when the curtains are pulled apart, the opening is completely open. From the edges of the cornice to the slopes of the windows, the optimal distance is 30-40 cm. There may be options that depend on the density and width of the curtains, the location of the window, and finally, simply on the wishes of the owners. The cornice is sometimes made across the entire width of the room - from one wall to the other.

Before taking measurements, determine the number of curtains and their type - based on this, you should choose the design of the cornice. If the curtain material is heavy, it is better to choose metal or plastic profile structures. They are fastened through holes in the tire.

The width of the structure depends on the number of levels in the cornice, and it depends on how many layers of curtains you plan to hang. For example, with a combination of thick curtains, lambrequin and tulle cornices will need to be made three-level.

Mounting types

Products can be mounted to the ceiling using brackets, hangers; special holes are used, made in some models at the factory. The cornice is fixed as follows: holes are made in the finished surface. Next, the part itself must be attached to the base using fasteners. The only difference can be in where in the part and in what quantities these holes are located.

Attaching cornices to a concrete ceiling is carried out as follows:

1. The cornice is cut to the right size– this can be done with a hacksaw, then assembled according to the instructions. Special plugs are inserted into the ends.

2. A hole is drilled in the middle of the cornice. To do this you will need a double drill. First, a hole is made from the outward-facing part that is equal to or slightly larger than the diameter of the screw head. Next, the drill is replaced with a thinner one. With its help, you need to make a hole in the plane of the cornice adjacent to the ceiling.

3. Make holes along the entire length of the cornice. The heavier the future curtains are, the smaller the gaps between the holes should be. In a wide cornice, holes will have to be made in two rows.

4. The prepared cornice is applied to the ceiling so that it is in the position according to the design.

5. Through the hole in the center you need to place a mark on the ceiling. A hole is drilled for the dowel. It needs to be straightened, after which all the marks that you consider necessary to make for reliable fastening are placed on the ceiling. Holes are drilled according to them.

6. After all these measures, the cornice is finally fixed, the dowels are hammered into place.

TO wooden ceilings the cornices are attached in the same way. The only difference is that simple self-tapping screws can be used as fastening elements.

Installation of cornices using brackets and hangers is almost the same. They already have holes for installation. After the structure is assembled, all that remains is to make the holes in in the right places ceiling, after which all that remains is to fix the cornice to them.

To attach a cornice to a plasterboard or tension ceiling, you must properly prepare the supporting elements. The cornices must be prepared in advance in order to be able to take measurements for installing the mortgages.

Today, such a variety is used for hanging curtains cornices that your eyes widen when choosing them. But they are mainly divided into ceiling and wall. Which curtain rod you attach to a particular window depends on the design of the window, the type of curtains and your preferences.

You will need

- Cornice
- Pencil
- Ruler
- Level
- Set of fastenings
- Electric drill
- Screwdriver

Instructions

First decide on the dimensions of the future cornice. In this case, you need to proceed from the size of the window and the weight of the curtains. It is better if the cornice protrudes beyond the window limits by 20-25 centimeters on each side. The heavier it is, the thicker the pipe should be. Do not forget that the cornice will also play a decorative role, so choose one that best suits your interior.

The higher the fastenings are, the more spacious and harmonious the room will look. In addition, the cornice should not interfere with opening and closing the window, and the curtains hanging on it should be slightly away from the radiator.

Try to use the fastening elements included in the delivery kit. Make sure they are designed to screw into the type of material your walls are made of.

Insert the curtain rod pipe into the brackets so that both external parties There was one ring each of the cornice. This will allow them to hang in place in the future rather than huddling together in the middle.

If the window is wider than two meters, an additional bracket will need to be installed in the center of the cornice to ensure the stability of the structure.

Video on the topic

Helpful advice

To ensure even folds on the curtains, calculate the number of rings so that the distance between them is no more than 10 cm.

Cornices For curtains – required part modern interior. Today there are very big choice round cornices of various colors and diameters, made from the most different materials: plastic, natural wood, of stainless steel, brass.

Instructions

Choose curtain rods for curtains must be done carefully, taking into account many features. The main characteristic is the strength and reliability of the cornice. Before purchasing, you should already have an idea of what curtains you want to hang on it, and should be selected according to their weight. Cornices made from plastic or soft metal may simply sag or even break, so they are not suitable for dense, heavy curtains.

You also need to decide what you plan to hang curtains s. If you want to hang tulle and, you should choose a double cornice for curtains, if you want to decorate curtains If you also have a lambrequin, you need to choose a triple cornice.

Pay attention to the mounting method curtains to the cornice. All clips and hooks for curtains must slide along the cornice without visible obstacles, otherwise you will constantly have to pull curtains s, as a result of which the loops will often break.

Choose curtain rods for curtains need to take into account the visual aspect of the room. If you want to visually expand the window opening, purchase a cornice to curtains you could close part. If the window is too large, opt for a cornice whose size exactly matches the width of the window. For low ceilings, choose a plain color or with vertical stripes textile. If you're going to hang curtains If you have a lambrequin, the cornice must be fastened underneath so that the one hanging on it does not cover part of the window.

You also need to consider the eaves. Cornice bracket for curtains should be slightly longer than the protruding part. Otherwise, when drawn curtains ah, an unattractive protrusion will form. The standard extension of cornices is approximately 15 centimeters. If your window sill overhang is longer, you can have a custom cornice made.

Handsome and harmonious look It is difficult to imagine rooms in the house without curtains, which must be selected in accordance with the overall design. In this case, the one on which the curtains will be attached plays an important role, since it is this that gives the finished look to the window.

When installed, a window cornice can be used as an additional decoration or hidden, defining only a load-bearing function without decoration.

Round or baguette cornices are suitable for decorative use, and for hidden installation, choose a string or rail cornice. Please note that usually decorative cornices tend to reduce the space of the room.

The choice of cornice will be determined by curtains

When choosing a curtain rod, decide what type of curtains you want to use, since thick and heavy ones require massive curtain rods made of wood or metal, ones that can support the weight of the curtains. Choose one-piece structures, otherwise there is a risk of sagging at the joints of the tires.

If you want to use lightweight curtains, common plastic curtain rods are suitable for you; they are much cheaper and, moreover, easier to install.

Selection of cornices depending on windows and walls

If the windows in your house are small, but located in a row, you can visually expand the window space; to do this, simply use a cornice the length of the entire wall at the window. This effect will create an optical illusion and make your small windows appear larger. For this solution, both string cornices and plastic or wooden cornices are suitable.

According to the method of fastening, cornices are:
- wall-mounted,
- ceiling.

Ceiling cornices are convenient where it is difficult to perforate a wall, for example, in panel high-rise buildings or old houses, where the wall filling simply spills out during drilling. Such cornices are attached to dowel-nails into the ceiling at a distance of 15-20 cm from the window sill. The disadvantage of these models is complete absence diversity, the lion's share of such curtain rods are designed for curtains with lambrequins, i.e. ones that will cover the tires completely.

Wall-mounted curtain rods are more interesting, they have many design options and shapes, but they are often not able to withstand massive curtains, which put excessive load on the mounting bracket. Based on their fastening, a distinction is made between wall-mounted and solid curtain rods. Mounted ones are a pipe with several tires, which are inserted into pre-mounted brackets. This is convenient, because the homeowner can choose the number of attachment points, which means significantly increasing the load-bearing capacity of the cornice.

Solid cornices are a remnant of the Soviet past; they are impractical, but easy to install. Such curtain rods usually have 2-3 supports, which are attached to one of the tires in the factory. Typically, overlay panels are used for decoration.

No home will look cozy and beautiful without curtains and curtains. To install curtains on windows, special s, the style and appearance of which is chosen by the owner of the house. Assembling and installing is quite simple, and anyone can do it with ordinary tools on hand - a tape measure, a pencil, a drill with drills, as well as a hacksaw, a hammer and a screwdriver.

Each style in interior design has its own window design features with certain models of curtains and curtains. And, naturally, a very definite decision is required in terms of choosing a cornice. At the same time, there are both universal possibilities and highly specific ones. But it’s better to sort everything out point by point.

Cornices differ in the method of fastening: they are ceiling and wall. For their production, various materials are used for their production: wood, metal and plastic. Cornices can be designed for one or several rows of curtains.

Ceiling and wall cornices

By choosing the method of attaching the cornice, you can visually adjust some features of the room.

The ceiling mounting of the cornice is suitable for low ceilings (up to 2.6 m). A curtain hanging from the very ceiling, and even with a vertical pattern, will give the desired effect visual increase room height.

Restrictions for attaching the ceiling cornice will arise in cases where the ceiling is covered with plasterboard. And this is especially true if light bulbs are installed in it in the immediate vicinity of the intended location of the cornice. Moreover, the option of such fastening is unacceptable for suspended ceilings if holes for fastenings are not provided. However, there is a way out: you can foresee all the nuances in advance and do it in suspended ceiling a special niche for curtains.

However, not every curtain can be hung on a ceiling cornice. For example, this option is not suitable for curtains with eyelets (decorative rings inserted into holes along the upper edge of the curtain fabric).

Wall mounting is provided for round tube cornices.

Regardless of the location of the cornice fastening, you need to take into account the location of the window sill and the heating radiator. Moreover, the measurement should be carried out not from the plane of the window, but from the plane of the wall. There should be enough distance so that all rows of curtains do not refract against the edges of the window sill or radiator.

Metal curtain rods

The modern market is ready to provide the widest range of cornices from various materials. But not a single texture can be compared with metal in its consumer characteristics. Until now, metal curtain rods are considered the most durable and reliable, especially if you need to hang heavy curtains. Manufacturers are ready to offer models suitable for almost any style in the interior: high-tech with the cold shine of polished metal, art deco with rich decoration and exquisite forms, strict classics, ease of Provence or good old retro. It's practically perfect option for placing curtains in the kitchen, bedroom, living room and other parts of the apartment.

Typically, metal curtain rods are a round rod that is attached to the wall. Although you can try and find special fastenings to the ceiling. The bar itself can be shiny, matte or coated with paint of any shade. The main decoration of such a cornice are the finials. It is thanks to them that you can most successfully fit the cornice into overall design rooms. The tips are often made in a fancy shape and coated with precious metals - for example, gold or silver. Sometimes they are decorated with stones of varying degrees of value or rhinestones. Of course, all this affects the price, but metal curtain rods initially do not fall into the category of the cheapest options.

Forged cornices deserve a special mention. They are usually made to order. This item is exclusive. In addition, made according to an original sketch, it will become a real highlight in the design of the window.

What are the benefits of wooden curtain rods for curtains?

An ecological material that can be perfectly processed into the desired shape and can withstand significant loads is wood. Wooden curtain rods can not only carry a functional load, but also serve as an excellent decoration. Beautiful brackets, rods, rings with fastenings for curtains and original ends allow you to create a truly wonderful ensemble together with curtains and decorate the window opening in the best possible way.

Wooden cornices can be attached in two positions - to the wall and the ceiling. You can hang quite heavy curtains on them without fear of deformation of the cornice.

The most relevant would be the use of wooden cornices in a room designed in classic or rustic style, for example, Provence or country.

Flexible curtain rods

The design and architecture of premises is becoming more and more intricate. For example, smooth curves of the wall, bay windows of complex shape pose a difficult design task window openings. Or, according to the designer’s idea, it is necessary to separate part of the room using curtains hanging in a semicircle. And here you can’t do without a flexible cornice.

It can be attached both to walls and to the ceiling using special devices in increments of 40 cm. Its rigidity is capable of quite high loads, and its flexibility allows it to be given the most different shapes. Original solution to implement the most incredible ideas.

Plastic curtain rods

Plastic cornice is one of the most practical, lightweight and moisture-resistant options. Polyvinyl chloride, used for the manufacture of such cornices, helps solve issues with the design of unusual window openings (bay windows, arches). Design plastic cornice Can be attached to both walls and ceilings. For various types and the severity of the curtains, different curtain rods are used that can withstand less or more severe loads.

A plastic curtain rod is very convenient if you need to hide curtain fastenings as much as possible. Its aesthetic is low visibility. Moreover, such a cornice is very convenient when decorating large window openings (up to 6 meters). Good combination low price and functional characteristics.

Baguette cornices

A baguette is a decorative strip that covers the fastening of the curtain to the cornice. Baguette cornices are used for curtains and lambrequins, which are arranged in several rows. They are especially good in large spacious rooms. This design of the cornice can often be found in the halls of theaters or restaurants. Suitable not only for window openings. With their help you can decorate a niche or doorway.

The cornice can be mounted either on the ceiling or on the wall. In this case, the fastener itself is hidden behind a beautifully designed baguette. Baguette cornice is an integral feature of the classic style.

String cornices

This type of cornice consists of several brackets with a string or strings stretched tightly between them. If the length of the cornice exceeds 3 meters, then another bracket is added in the middle to avoid sagging of the string. For this type of curtain rods, heavy curtains made of brocade, jacquard, etc. cannot be used. Curtains made of light taffeta, organza, silk or chiffon are best suited. The mount can be fixed both on the wall and on the ceiling.

To make the cornice look most attractive, designers suggest whole line opportunities to improve its appearance. This includes the coating of the strings themselves, which can be not just the color of steel, but also coated with copper or brass, which from a distance resembles gold plating. Often string curtain rods are complemented with original clips that hold the curtains. Another important design “trick” is all kinds of tips. The latter can not only be of different shapes and colors, but also made of another material - for example, wood, plastic or glass.

However, string cornices are more limited in their use. Partly due to its shape, partly due to its inability to withstand the weight of thick curtains. Therefore, they will not be appropriate in a classic interior, but are very relevant for a room in the style of minimalism, hi-tech, avant-garde. An additional bonus of string cornices is their relative affordability.

And a few more general advice. In order not to reduce the height of the room, try to ensure that the width of the curtain does not exceed its height. Additional curtain rod brackets are necessary for heavy curtains. However, it is worth considering the fact that they may interfere with the movement of the curtain fabric along the cornice.

At all times, every person arranged his home very carefully so that further living would be comfortable and cozy. Capes and bedspreads for sofas and armchairs were carefully selected, and beautiful curtains were hung on the windows.

Curtains in the room serve not only as a decorative detail, but also to protect from prying eyes.

Today there are many different options The range of curtains and curtain rods is so large that a person sometimes gets lost and cannot make the right optimal decision.

Wide variety of curtains and curtain rods

Curtains are designed so that the room space cannot be seen from the street, and they can also protect against cold air and bright rays of the sun, which are sometimes so unpleasant.

Curtain rods are usually used for fastening. Their design differs from each other in the mounting method and the material used in manufacturing.

The article contains photos of curtain rods, every visitor to the site will be able to familiarize themselves and choose suitable model for your home. The range of products for window openings in the markets is huge - these are Roman curtains, roller and regular blinds, English curtains, Japanese curtains.

But so that you do not choose any curtains, you need to fix them correctly. For this purpose, a cornice is selected.

Depending on the classification of curtains, the material of construction is determined.

Wooden.
Plastic.
Metal.
Made of composite composition.

The most important criterion when choosing is the type of cornices. They can be: profile, string, baguette and flexible.

Ceiling curtain rods should not only be beautiful, but also safe, especially if there are children in the house. It is better to buy string cornices, as they have long gone out of fashion.

If the room has a suspended ceiling, then the curtain fastening system should be appropriate. They must fit together.

The tension curtain rod is attached to the structure itself and to the wall. Each method is effective in its own way. Nowadays there are quite a lot of different design trends and the cornice should fit perfectly into any of them.

Very often when decorating a room, an ordinary straight cornice is not suitable. It could be a window with an unusual design. For this solution, experts recommend using a flexible curtain rod. This type allows you to use an unusual interior style in your home.

If you use curtains and light tulle, then you should opt for double-row curtain rods.

You have already realized that the range of curtain systems can be very different and everything completely depends on your own preferences. The main thing is that everything fits harmoniously.

Modern technologies do not stand still, even if earlier metal curtain rods were used for curtains. And today, even if you have just such a design, it can easily be hidden under baguettes.

The material is used for decorative design and hides defects in walls or ceilings. Using baguettes you can complete the look of the entire interior.

And the decorative strip covers the details of the system - profiles and hooks. Baguette curtain rods are quite an advantageous use, allowing you to implement the most varied ideas in a room.

What you usually need to pay attention to when choosing a curtain rod

The first step is to determine the feature of the ceiling, whether it is concrete, suspended or wooden. Next, they take into account whether the curtain fabric is heavy or light.

Under no circumstances should the curtains be connected to the surface of the heating system. Curtains should function freely and not cling to the window sill.