(17 ratings, average: 4,29 out of 5)

What summer resident doesn’t dream of relaxing after a hard week of work on his property, taking a comfortable position on a comfortable folding bed? However, a chaise longue is not a cheap pleasure if it is really high quality and good. What should those who cannot afford a good sun lounger do, but have a great desire to relax? Don't be content with little: put the uncomfortable bench or chair aside.

This article will cover instructions and step-by-step explanations, and even an amateur carpenter will be able to make a lounger with his own hands, which can even be taken on fishing trips. The chaise longue will harmoniously fit into your country house exterior and will become an integral element of your relaxation.

What is a chaise longue

A chaise longue is similar to a wooden chair, but is reliable and smaller in size. It is convenient because a person can take a position that is suitable for the spine and spinal muscles. One more no less pleasant fact is that the back of the garden chair is adjustable. The garden lounger is quite mobile: in summer period it can be located in the garden on the site, and in winter - somewhere in the house.

In order to make folding wooden chairs, you will need:

1. Some kind of wood, since this material is the most suitable for a garden lounger, and besides, it is quite environmentally friendly;
2. Rattan;
3. Plastic;
4. Two-centimeter slab of laminated wood;
5. Wooden boards and beams;
6. Kit necessary tools: jigsaw, drill, screwdriver.
7. Drill;
8. Rollers (diameter 10 centimeters);
9. Corners (fastenings);
10. Sanding sheets;
11. Varnish, paint (at personal discretion);

Chaise lounge dimensions

The traditional size of a chaise lounge is 60 x 190 cm, but you can choose the one that will suit your parameters. You should start with a schematic representation of the future chair, drawings must include all the nuances. When a decision has been made on the appropriate size, you can begin to prepare the parts.

Construction stages

You need to prepare the bars for the legs - 5-10 cm. Next you need to attach the legs, stepping back from the edge of the bars 5-7 cm, and rollers to them.

Parts of the grille for the chair must be made using a jigsaw. For them, the optimal size will be 8 x 60 cm. Spacers will help make a suitable distance from 1–2 centimeters so that the planks can be screwed to the frame. After all this work has been done, the chair needs to be sanded and varnished or painted.

If desired, you can also make a folding country chair. In this case, the wooden lattice must be divided into 2 parts, which then you need to connect using door hinges. Also, do not forget about the mounting strip, which must be installed so that it supports the stand screwed with screws.

Lounger with fabric

The easiest way to make a chaise longue with your own hands is a chair made of dense material on a frame. This optimal choice for a summer cottage, since it is quite multifunctional: in a matter of seconds you can turn your country chair into a chair.

Necessary materials:

For a folding country chaise lounge, fabric of sufficient density is suitable, good quality and not exposed to sunlight and moisture. You need to choose denim, canvas or tarpaulin.

Work needs to begin with preparing the slats suitable size and polishing them, and after that you can begin assembling all the elements.

Assembly instructions

Need to drill holes for bolts the right size on long beams, remove all irregularities by sanding. Then in a place located in close proximity to the head lying, it is necessary to make the same holes so that you can change the bending angle.

At the ends of the long beams, two holes must be made through which the seat will be made. The diameter of the round beams should be the same as the diameter of the long ones. For a better connection, coat the ends with PVA glue.

Connect all the resulting elements with bolts through the holes made in the headboard.

After the above steps, you can begin the finishing touch - stretching the fabric. Stretch the fabric over the frame products, secure the edges to the crossbars with thick thread (if you decide to sew the fabric before attaching it to the frame, you can use a sewing machine).

Kentucky chair

This chair, perhaps, can be called even more interesting than the previous ones, because it will really decorate your teacher. Assembly of the Kentucky chair is carried out only using bars.

In order to make a chair, you will need the following materials:

Assembly instructions

You need to start with processing the wood in order to prevent its destruction, fading, and protect it from moisture, sunlight, and wind. At this stage you you will need a special mixture for deep impregnation of wood for the purpose of coloring (stain). It should be specifically for working with exterior objects. You can also use parquet oil suitable for wooden objects. After completing this stage, you need to sand all the bars.

The holes need to be made with a diameter of six millimeters.

26.03.2017

Approaching summer season and it's time to think about creating a sun lounger with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.

Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.

Sun loungers are widely used on beaches and by pools. On personal plots, dachas.

Sun loungers are made from various materials:

• wood;
• plastic;
• aluminum;
• rattan;
• PVC pipes;
• durable fabric.

Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.

Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.

Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.

Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.

In this article we will tell you how to create wooden sun loungers with your own hands.

To ensure the longevity of the effort expended, the materials used must be processed.

Antiseptics and special impregnations will help protect wood from moisture, harmful insects, rot, and mold. It is better to carry out processing before assembling the structure.

After installing the sunbed, the wooden parts should be coated with primer, drying oil, varnish or paint. This will extend the life of your masterpiece.

Fabrics should also be protected from rain and sun. Water-repellent impregnations will help preserve their brightness and service. Their effect lasts 2-4 weeks.

And, of course, remember the famous Russian proverb when working. Measure seven times, cut once.

Monolithic chaise lounge made of wood

Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.

You will need tools:

• electric jigsaw or hacksaw;
• drill;
• screwdriver;
• self-tapping screws;
• fine grain sandpaper;
• spirit level;
• roulette.

When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:

• glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
• boards 0.25 cm thick.
• wooden beam with a square section of 50x50 mm;
• 4 wheels with a diameter of 10cm;
• corners for strengthening the bed;
• door hinges;
• varnish or paint.

We suggest you make a chaise lounge according to this pattern.

Legend:

1. Front legs.
2. Hind legs.
3. Bearing longitudinal.
4. Back support.
5. Back support.
6. Bearing transverse.
7. Fixing bar.
8. Backrest support.
9. Wheels.
10. End beam.
11. Back slats.
12. Seat slats.
13. The support beam is transverse.
14. Fixing bar.

You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Assembling a chaise lounge on wheels

We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.

We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.

Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.

We should have two parts. The smaller one is intended for the headboard. Connecting both grids door hinges. We install a support bar under the opening part.

All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.

For more comfortable rest You can sew additional mattresses that fit the size of the bed.

Simple sun lounger

To create a wooden chaise longue with your own hands, you need the following materials, as well as tools:

• tape measure and square;
• pencil;
• saw;
• electric drill;
• screwdriver or screwdriver;
• screws, self-tapping screws and studs for fixation;
• sandpaper or grinder;
• wood putty;
• dye.

Wooden beams used in the work:

• for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
• 2 longitudinal bars for a frame 215 cm long;
• 2 cross beams -50 cm;
• 6 legs -35 cm;
• 13 slats for a seat measuring 2.5 x 8 x 60 cm;
• 6 slats for the back - 2.5? 8? 88 cm.

The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.

Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.

We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you

We make the back from 2 boards measuring 88 cm and 3 boards measuring 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.

We securely fasten the longitudinal strips. We round them for a more beautiful look.

Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.

We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.

A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.

Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.

DIY garden lounger video

Fabric chaise lounge

A chair with a frame complemented by fabric is one of the most comfortable budget types sun loungers. It is convenient to fold and easy to carry. Can be stored flat. It takes up little space.

To create a sun lounger with your own hands you will need:

• bolts, nuts with a diameter of 8 cm;
• small nails with round heads;
• round sticks (1 piece - 65cm, 2 pieces - 50cm, 2 pieces - 60cm);
• rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
• needle file, fine-grain sandpaper;
• glue;
• durable material measuring 200 by 50 cm.

Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:

• birch;
• oak;
• beech.

Choose fabrics with maximum strength. Great fit:

• teak for mattresses;
• tarpaulin;
• canvas;
• camouflage;
• denim

These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:

• A.1200x600 mm.
• B.1100x550 mm.
• H.650x620 mm.

Cut the boards to the required length. We sand with sandpaper.

In the longitudinal bars we make indentations of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Grind with a round file.

We make cutouts in part B. They will allow you to change the position of the backrest later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.

According to the diagram, we drill holes in the bars to connect the parts.

Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.

Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.

We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.

ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.

DIY fabric chaise lounge. Model 2

For this chair you will need:

• wooden slats measuring 2x4 cm. Two slats each with a length of 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
• slats measuring 2x6 cm. One each 61 and 57 cm;
• 65cm wooden rod with a diameter of 1.2cm;
• a piece of fabric 137 cm long and 116 cm wide;
• bolts, washers, nuts, screws;
• glue;
• round needle file, sandpaper or grinder;
• electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.

Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.

On the seat frame, step back 43cm from the top. Make holes.

On the piece supporting the back, drill holes in the center of the edges.

Process all holes with a round file.

Model installation

First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.

Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.

ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.

Install the back support piece using washers and bolts.

Sand away all imperfections. If desired, varnish or paint.

Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.

Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.

Chaise lounge made of polyvinyl chloride

Another example of a lounger with a fabric base. Only in in this case wooden slats are replaced with PVC pipes. Chair sizes may vary.

In this do-it-yourself chaise lounge model we used:

• 2-inch polyvinyl chloride pipes;
• L-shaped connectors – 8 pieces;
• T-shaped connectors – 6 pieces.

First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.

Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.

Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you get a rectangle within a rectangle.

The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.

Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.

Portable lounge chair

The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.

The collapsible chair consists of 2 parts:

• backrest covered with dense, wear-resistant fabric;
• wooden seat.

In addition to tools, the following materials are used:

• 2 legs for the backrest measuring 20x40x800mm;
• 2 legs for the seat - 20x40x560mm;
• 2 lower crossbars - 10x50x380mm;
• 1 top crossbar - 10x40x380mm;
• 1 seat crossbar - 20x40x300mm;
• 5 slats - 20x40x400mm;
• piece of material - 600x500mm.

The procedure for assembling a portable sun lounger is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.

We connect the back and seat of the chaise lounge.

Enjoying your holiday in your new armchair.

Pay attention to another interesting chaise lounge model in the video.

Kentucky chair

You can make the original look of a chaise lounge with your own hands. A sun lounger is assembled from bars. Convenient, easy to fold. Takes up minimal storage space.

For the chair you will need:

• 4mm galvanized wire;
• 16 staples;
• bars 30x55 mm.

Before starting assembly, it is recommended to treat the bars to protect them from ultraviolet rays, humidity. Choose an oil- and wax-based stain. Beitz is good. You can use parquet oil. Apply the product using a spray bottle or brush.

Kentucky chair installation

Drill the holes. Their diameter should be slightly wider than the thickness of the galvanized wire. Sand all rough spots and imperfections.

Fold the parts according to the photo and start stringing the boards onto the wire.

Secure it with brackets.

ADVICE. Instead of wire, use galvanized studs. They are secured with nuts and washers.

Raise the planks. The Kentucky chair is ready for use.

Original chaise lounge

Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.

To create a lounger you will need the following materials. And also tools:

• 2 sheets of plywood 2cm thick with a size of 160x180cm;
• 6 round strips with a diameter of 30mm and a length of 92cm;
• 12 planks made from leftover plywood measuring 94x10cm;
• dense fabric with a width of 92 cm;
• construction adhesive;
• screws;
• roulette;
• cardboard for layout;
• Circular Saw;
• electric drill.

Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.

We transfer the drawing onto sheets of plywood and cut out the side parts with a circular or band saw. At the junction with the round beam, we cut out recesses with a diameter of 30mm.

We sand all the unevenness and cutting defects.

We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.

We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.

We sand the product again. Now we hide the assembly flaws.

Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.

You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.

Birch lounger

It must be said that our Russian craftsmen are distinguished by their ingenuity and creative approach. This chaise lounge is made by hand from birch logs. It is distinguished by Russian folk flavor. Perfect for garden plots.

The work uses:

• logs with a diameter of 75-120mm;
• drill and set of drills;
• electric saw;
• staples and screws;
• marker;
• electrical tape or chalk for drawing.

Let's start creating a sun lounger.

We saw the trunk into logs 45 cm long.

On the floor we draw a line for the future sunbed using chalk, or glue it with electrical tape.

We lay the logs according to the diagram. We drill holes with a drill and connect the logs using long self-tapping screws. We use a socket wrench for this.

Turn over the almost finished product. We are testing. We eliminate shortcomings.

For greater stability, we fix the back side of the lounger with brackets.

A monolithic birch chaise lounge is ready to delight you and your guests.

Unusual do-it-yourself sunbed for a summer house

Pallet lounger

One of the most budget-friendly sun loungers is made by yourself with skillful hands from pallets. What it is? A pallet or pallet is a stand that is designed to transport cargo.

DIY pallet lounger video.

Now you have several options for making your own sun loungers. Choose a design that is convenient for you, or affordable. When choosing sizes, keep in mind that in addition to you, your wife and your children will also rest on the sunbed. Adjust the width and height to suit your overall needs.

It’s so nice to relax at the dacha after a hard day full of worries. This is best done in nature. A sun lounger will help you sit comfortably on the site or near the pond. It is not necessary to buy it in a store; it is possible to reproduce this piece of furniture with your own hands without special labor. A DIY chaise longue for a summer cottage will not only help the owner relax, but will also transform the style and design of the garden plot.

Benefits of a sun lounger

A chaise longue is essentially the same chair, only lower and more stable. Thanks to its elongated shape, it helps to rest and relax all muscle groups in the body. A very important advantage of a chaise lounge is that its back can be fixed in any convenient position.

It is very convenient to relax in the lap of nature in a sun lounger. Such relaxation brings only pleasant and positive thoughts to the human body. Since most sun loungers are made of wood, these items are completely environmentally friendly.

Wooden sun loungers are easy to use, lightweight and do not require special care. In the summer, such a chair can be taken out into the yard, and in the winter it can be stored in the basement or in the house.

Making a sun lounger can also be done from rattan or plastic, but in this article we will talk about how to assemble a wooden sun lounger yourself.

Options for creating sun loungers

At the moment, there are a huge number of variations for making a wooden sun lounger with your own hands. Some of them will be discussed below.

Wooden lattice chaise lounge

This model of sun lounger is very common at seaside resorts. Now the owners country houses and dachas will be able to enjoy relaxing on such a piece of furniture. The chaise longue is essentially flat, with an adjustable backrest. The only thing that makes it difficult to move around the site is its heaviness. But the problem can be solved by installing rollers or wheels on it.

To assemble this piece of furniture with your own hands you will need:

• Plates with a thickness of 1.8 cm;

  Important! It is best to use slabs made from coniferous wood, as they are more resistant to atmospheric influences.

• For the frame, beams size 45*45;
• For covering the sides of boards 2.5 cm thick;
• Screwdriver and jigsaw;
• For working with wood, several drills with a diameter of 4 cm;
• Screws (it is better to take those that have a countersunk head);
• Mounting corners for the bed in the amount of 4 pieces;
• Ten-centimeter rollers in the amount of 4 pieces;
• Sanding sheet with grit from 120;
• Decorative coating (varnish, paint).

The master himself can independently choose the size of the chaise lounge that suits him best. Standard size 60*190 cm are considered. To begin with, it is best to prepare drawings.

The algorithm for making a sun lounger with your own hands is as follows:

1. We assemble the frame of the future structure from the bars, fastening it with metal corners.
2. We cover the outer side with boards for greater decorativeness.
3. We mount the legs to the boards using 6 cm long screws.
4. In order to get a wooden lattice, you need to make boards of the same width from the slabs using a jigsaw (each size is 60*8 cm).
5. If you want to make the backrest adjustable, then you need to separate it from the structure of the lounger and fasten it to it using a door hinge.
6. We install a fastening strip between the long beams in the headboard area. We attach the support stand to it using screws.
7. At this point, the work on making the sun lounger is completed; all that remains is to go over it with a sanding machine and cover it with paint or varnish.

For more information on how to make a sun lounger out of wood with your own hands, watch the video:

Wooden chaise lounge with fabric seat

This chair is also very popular. It is convenient in that it is very convenient to move this piece of furniture around the site; it does not cause any problems during transportation and storage, as it folds into a compact flat shape. Making such a chaise lounge with your own hands is not difficult.

For such a chaise lounge you will need:

• 6 slats with a rectangular cross-section of the same size 25*60 cm, but of different lengths: 2 of 120 cm, 2 of 110 and 2 of 62 cm.
• Five slats with a round cross-section of 2 cm. The number depends on the length: 65 cm - 1 piece, 60 and 50 cm, two slats for each length.

  Important! Slats should be used from wood species such as birch or beech. They have greater strength.

• Durable fabric measuring 200*50 cm. Canvas, jeans or tarpaulin are perfect.
• Bolts and nuts for furniture with a diameter of 8 mm.
• PVA glue.
• The file is round.

The work is performed in the following sequence:

1. If there are no ready-made slats, then you need to cut them in the right quantity and the right length. All cuts must be sanded.
2. The main frame is drilled at a distance of 40 and 70 cm. Then the holes are processed with a round file.
3. To change the backrest angle, the other frame is equipped with four cutouts in increments of 7 cm.
4. In order to mount the seat, holes of 2 cm are made at both ends of the slats.
5. The round cross-sections at the ends are lubricated with PVA glue and installed in the prepared holes.

At this point, the work on assembling the frame is completed, now we move on to sewing the seat. Before this, you need to measure how long to take a piece of fabric. To do this, you need to fold the chaise longue and measure the amount of fabric. In this position, it should sag a little and not be tense.

In order to fix the fabric on the chaise longue, you first need to process the edges on sewing machine, and then wrap the transverse round crossbar and nail them with small nails. On both sides.

It is also possible to make loops on both sides and attach the fabric on them to the cross bars.

Kentucky folding chair

This original chair is assembled from blocks, folds easily and does not take up much space when stored.

To make it you need to prepare:

• Bars size 45*30. Size 50*33 cm is also used.
• Galvanized wire with a cross-sectional diameter of 4 mm or studs with washers and nuts.
• Staples for clamping wire in the amount of 16 pieces.
• Fine-grit sandpaper.
• Wire cutters and hammer.

For work, the total length of the bars is 13 meters. All cuts and holes in the bars must be carefully sanded.

The work is carried out in the following sequence, as shown in the drawings:

Conclusion

A chaise longue is a very comfortable piece of furniture that gives home comfort and a certain charm to the area. It is a pleasure to relax in such a chair.

There is no need to buy ordinary plastic chairs for the site, which look too simple, or buy expensive garden furniture, just take a little time to create your own unique pair of sun loungers, so you can save your budget and develop your carpenter skills, and make original decoration plot with your own hands, which will later be a source of pride. You can make several sun loungers of the same type, or you can try your hand at making all the models at once and place them throughout the garden so that you can relax anywhere.

A do-it-yourself chaise longue (drawings with dimensions will be provided in the article below) is quite easy to make. But before buying material, it is better to calculate the amount of wood in advance, and the fabric is selected more durable.

Previously, during periods of shortage, they used ordinary tarpaulin and untreated dry boards for homemade furniture of this format.

It was possible to find a comfortable and well-thought-out sun lounger (aka chaise longue) only in relaxation areas. Nowadays everything is simpler, and creating comfortable garden sliding furniture for yourself and your family for almost free of charge is as easy as shelling pears.

Kinds

For the simplest reclining chair made of wood, aluminum or plastic, there are the following types or types:

1. Children's lounge chair.
2. Beach.
3. Dachny.
4. For a residential building or apartment.

The difference is always environment, and if at home you can put a compact extendable chair like a chaise lounge, then at the sea or by the pool there is always similar furniture that is resistant to moisture (salt).

But to make it simple, convenient and inexpensive, let’s consider a simple type of chaise lounge on two frames, with a crossbar and a fabric back. This is a portable type of furniture for relaxation, so everyone can assemble identical sliding chairs for the whole family.

Self-production

Where to begin? Well, of course, in terms of size. The more it is manufactured, the stronger the sun loungers will be.

Drawings and dimensions

And you will need to assemble two frames of this format for one chaise longue:

Which will result in a simple design:

Let's start like this:

1. Choose a pine board or timber. If it is not possible to bring/order, then we are looking for birch pallets. Now it's easier to get one quality material. Any type of wood must be treated. Moreover, we plan, sand and paint before assembling into one whole. A second layer of paint or varnish can be applied at the end.
2. Next, we look at the drawing and notice that there are power elements. These are cross members that necessarily cut into the frame. And for such a procedure, a hammer, chisel or power carpentry tool (a hand router, for example) was created. Here it is important to do it the way it has always been in stools Soviet period: tongue-and-groove fastening up to half the thickness of the frame block. And everything will fall into place. It won't be easy to unwind.
3. The power crossbars on the frame are the same boards, but we attach decorative or regular tarpaulin to them. Synthetic fabric will also work. But we make sure that it does not stretch, otherwise the butts will eventually sink into the ground.
4. So, two frames and two supports on movable hinges are ready. We assemble the structure together using bolted connections or special movable fasteners (the store will always help you with the choice).
5. Collected. There is some fabric left. But it needs to be cut out. More on this later.

For simplicity, we give the dimensions for the drawings.

1. Back. Frame. 1219x38x19 mm, two pieces. 610x38x19 mm one piece. 648x38x19mm is one joke. 610x64x19 mm one piece.
2. Seat. Frame. 1118x38x19 mm 2 units. 603x38x19 mm 4 units. 565x38x19 mm one unit. 565x64x19 mm one unit.
3. Back support. 381x38x19 two pieces. And a wooden dowel longer than 650 mm in the amount of 1 piece.

Materials and tools

To make a strong, correct seat, look at the following drawing:

You need to fold the cut piece of thick fabric and sew the indents. But you can make a two-layer coating without saving. To do this, fold the measured segment inward with the right sides and stitch along the sides. But in the center (similar to a pillowcase) we leave space for carefully turning the seat right side out. Then you can simply secure the longitudinal seams with another stitch.

But you need loops or pockets to connect everything into one. So we measure in advance already on wooden frame required size pockets, then we fold our rag and stitch it. It is important to measure so that there is a middle state between too tight and sagging.

When working with fabric and wood, we need to take:

1. Plane.
2. Hacksaw.
3. Fasteners.
4. Hammer.
5. Chisel.
6. Sewing machine.
7. Measuring tool.
8. Paints and varnishes for adding shine.

Be careful with the fasteners. Since iron or steel is susceptible to moisture, it is necessary to protect them with paint. He also recommends using quick-drying adhesives in those joints where there will be play. But under no circumstances do we apply adhesive to the threads, because disassembling the structure later will be problematic.

How to use and care

To keep things simple, you can do this:

Then the frame can be made monolithic, and the bright seat fabrics can be easily machine washed. Another plus: you can make several pockets for different weights and heights. The result will be a universal design that even a student can customize.

Decor

There is more than enough room for imagination. This is what happens without haste, savings and hackwork:

And if you take four more bars and movable fasteners (clamps, bolts, etc.), then you will get a sun canopy. What is always appropriate in good weather:

By replacing the fabric with boards, we get the simplest bench-chaise lounge in terms of labor costs. The idea is not new, but accessible:

When you don’t have time for cutting and sewing, you can again make a lattice base, and buy additional bedding from IKEA for this space:

Although the collapsible design does not look so expensive, it has a significant advantage - mobility. And you can fully relax if you add portable footrests to the same frame. And you don’t have to invent anything for this:

Prefabricated or stationary sun loungers are simplest form country furniture. There was never anything complicated in their design. But when working on leisure furniture, as in any business, you need to adhere to an independent or read-out plan.

How to make a sun lounger for the garden with your own hands, see the instructions in the following video:

Sun loungers are attractive because they are light in weight and can be used for relaxing anywhere - on the veranda, in the garden, when going out of town, and so on. Based on this, the appropriate design is selected - monolithic, sliding, portable (a very convenient option for transportation) and a number of others.

The cost of the simplest models of sun loungers available for sale starts from 3,080 rubles. On the one hand, it’s attractive. But the main disadvantage of finished products is that many of them are simply not suitable for the buyer - one in size, another in design, and another in frame material. The conclusion suggests itself - make a chaise longue with your own hands, just “for yourself”.

Tree

This is a general concept. An important question is which breed to focus on. Before you look at the drawings of a chaise longue and the progress of work on its manufacture, it is worth clarifying which wood is best suited.

Firstly, mostly those who make things with their own hands (if we are not talking about a professional working on orders) are those who want to save money wisely. Consequently, it is unlikely that anyone will use expensive wood (for example, beech or oak).

Secondly, all breeds are different various properties and characteristics, including the density of the structure (and this means the weight and ease of moving the sun lounger). Consequently, when choosing a tree, you need to take into account the specifics of its operation, depending on which the corresponding drawing is developed.

Thirdly, such sunbeds for a home (apartment) are not purchased or assembled with your own hands. The main place for installing a sun lounger is outside the building (near the pool, on summer cottage etc). Consequently, the tree will be exposed not only to dampness, but also to exposure to sunlight. And here there is some contradiction. Coniferous trees less susceptible to rotting, but when heated they “resin”. Even if the lounger is made and (painted), this is not a way out.

Therefore, for example, cheap It is not advisable to use spruce to make a sun lounger. In addition, not everyone can easily tolerate the tart smell of resin. There are numerous tips on the Internet for assembling a sun lounger with your own hands from this very tree. The author has already outlined his arguments against. Well, it’s up to you, the reader, to decide whether to take them into account or not.

• Larch. Strength and durability will be ensured.
• Ash. Good texture and ease of processing are advantages. Disadvantages - it will cost a little more, and it is not very suitable for a portable chaise lounge model due to the density (and therefore weight) of the wood. Although for a stationary lounger it is one of the best options.

Plywood

There are quite a lot of different schemes and drawings of sun loungers. In some cases, when making such a lounge chair with your own hands, for individual structural elements, not solid wood is used, but materials based on it. Mainly multilayer plywood. This partially reduces the overall weight of the product. The range of such products is quite large, but this does not mean that you can take any type of it. From budget options In the private sector, two types of plywood are popular -.

The sizes of their sheets and basic characteristics are almost identical. The fundamental difference is in the adhesive composition that holds the veneer layers together. The FSF used in the manufacture is somewhat toxic. That is why this type plywood is recommended only for external works (continuous lathing under soft roof, facade cladding and so on). Therefore, it is definitely not suitable for a sun lounger - only FC. In terms of “environmental friendliness” there are no complaints about it.

Textile

It is also used in some models of sun loungers. There are few criteria here - strength, minimal stretchability and susceptibility to fading. Therefore, you should focus primarily on material that is fairly dense and monochromatic. The fact is that coloring substances (pigments) fade with different intensities, and “bald spots” may gradually appear on a canvas with bright designs.

Fastening elements

Briefly on this point - with protective coating or from stainless metals (alloys). Since sun loungers are often made for installation outdoors, corrosion of the “iron” cannot be avoided. “Rust” will quickly appear even through the paint, and in terms of maintainability (with the replacement of individual parts) difficulties will arise.

Examples of drawings of sun loungers

It is not difficult for an owner who is used to doing everything with his own hands to develop his own model. Moreover, if you accurately imagine what the result should be. Examples can suggest some ideas, features of engineering solutions - and nothing more.

• A chaise longue is almost always made for one user. Therefore, his optimal length(in the unfolded position) – 200±10, width – 65±5 (cm).
• The optimal parameters of lumber are (in mm): sheets (slabs) with a thickness of 10 to 15, bars - from 3 x 4 to 5 x 5, boards - 15. This is quite enough to ensure the reliability of the sun lounger in combination with a low weight. The use of larger samples (similar models are found, judging by the drawings) is impractical. Children will not jump on such pieces of furniture, unlike armchairs, beds, and sofas. And wooden blanks of the indicated sizes will fully withstand the weight of one person, especially in a “static” state.

Do-it-yourself chaise longue - progress of work

Tree marking

When making simple models of sun loungers, this is easy to do if you have finished drawing, and, accordingly, the sizes of all components. The only thing that needs to be taken into account is the rational use of lumber. In other words, make markings in such a way as to minimize the amount of waste.

It’s more difficult if the chaise longue has some kind of shaped structural elements - handles, supports, and so on. In this case, you will have to make patterns. First, a given part is drawn on a sheet of graph paper, then its dimensions are projected onto thick cardboard. A blank is cut out of it, placed on lumber, on which its outline is outlined. Next is a selection of wood. If we are talking about plywood, then the easiest way is to make the cutouts yourself using.

Parts processing

• This applies to both grinding surfaces and rounding all edges. No matter what tool you use to cut the wood, its microscopic fractions along the cut line will certainly remain. And these are potential thorns.
• Wood, regardless of the variety, is affected by mold and mildew. It's all a matter of time, and this largely depends on the breed and operating conditions. But in any case it is necessary.

Drying lumber

In this case, it means additional exposure before assembling the sun lounger, after impregnation. Even if the tree was initially selected dry, there is a high probability that during storage it was partially saturated with moisture. Therefore, drying after processing will not hurt. At the same time, you can make sure that the geometry of the parts is not broken. If any distortions appear, it is better to level them out immediately than to later disassemble the finished chaise longue and eliminate the shortcomings (or completely replace the part).

Assembly of the structure

There is a drawing that shows, in addition to the dimensions, the joints of the parts, so the algorithm of actions is chosen independently. Some features worth noting:

The specifics of fastening structural elements raise many questions. What to use?

Firstly, only self-tapping screws, and for wood, are used as fasteners. Nails are not suitable for these purposes because they easily split dry material. And it’s not always possible to hammer them strictly vertically. Taking into account the small thickness of the wood blanks, it is not a fact that the tips of the fasteners will not come out. In terms of maintainability, self-tapping screws also benefit – disassembling/replacing parts/assembling a chaise longue is not difficult.

Secondly, you shouldn’t limit yourself to just one fastener. You definitely need to think about strengthening the structure. How to do this depends on the skills of the master and the specific scheme. Tenon-groove joints (with adhesive fit), corners, strips, earrings – there are plenty of options.

Installation of fasteners also has its own peculiarity. To prevent cracks from appearing in the wood and to ensure that the self-tapping screw goes without distortions, a channel is first drilled. The cross-section is slightly smaller than that of the hardware leg. Next is a chamfer (according to the diameter of its head), with the expectation that it will “sink” by about 0.5 - 1 mm. Disguising fasteners in wood is easy. There are not only sealants and mastics on sale, but also mini plastic plugs designed specifically for hiding connecting elements in furniture. And any color, so you can match it general design sun lounger.

If it turns out to be quite massive, you should think about installing roller bearings in the lower parts of the legs. You can find a suitable option in furniture stores. This chaise longue will be easy to move alone.

These are the main recommendations, since assembling it yourself is a creative process. Having a ready-made drawing of a sun lounger and minimal skills in working with the simplest household tools, it will not be difficult to make individual structural elements and assemble them. The main thing is to think everything through carefully, and success is guaranteed.