How to lubricate door hinges to prevent them from squeaking - proven products and recommendations. How to lubricate the hinges of steel and plastic doors yourself: step-by-step instructions

A squeaky door will get on anyone’s nerves, so I want to get rid of the grinding noise and find something to lubricate the doors so they don’t creak.

We will also consider what to do if the lock does not open well and give advice on caring for the keyhole.

First, let's get acquainted with the types of doors. They are divided into types depending on their location, the material from which they are made and the opening mechanism.

Based on the first feature, door structures are divided into:

balcony;
kitchen
bellhops;
living rooms.

Others lead to stairs upstairs or to the attic of the house.

Depending on what the doors are made of, they can be wooden, plastic, laminated or glass.

And even this is not the end of the list of door types.

If we talk about the opening method, doors can be sliding or folding.

Why does the squeak appear?

An unpleasant grinding noise when opening interior and other doors in the house can occur for the following reasons:

In case of deviation from the manufacturing rules. If, while producing the door structure, you made a mistake, for example, you welded the hinges incorrectly, then squeaks will certainly appear during operation. And to get rid of uncomfortable sounds, you will need to dismantle the entrance group;
If the structure is not specially lubricated. Hinges that are not lubricated with a special compound move with a characteristic squeak. The situation will be improved by a simple lubricant;
Incorrectly chosen composition for lubricating the hinge. The wrong component can be grease, which becomes thick and turns into an abrasive. It will need to be removed and another means used;
There are no balls in the loops. Then lift the door leaf from its place, insert balls into the hinges and put the door back;
The squeaking can be caused by the covering material in contact with the door when it is opened. To eliminate unpleasant sounds, you can only remove centimeters of the sheathing using scissors. If even after these actions everything remains the same, then it is better to completely replace it;
If the canvas rubs against the box. This may be a consequence of incorrect positioning of the door and its swelling due to dampness. If the first cause needs to be eliminated, the door only needs to be reinstalled. But to get rid of the second reason, you will have to dry the room;
The ends of the canvas touch the platband. Then the grooves where the fasteners are located need to be enlarged;
Loose and time-damaged hinges. The most reasonable solution in this case is to supply other parts;
Poor fixation of the hinges of the door structure. To understand whether there really is such a problem, you can place something underneath, for example, an ax, with which you need to slightly lift the door leaf. Weak screws need to be replaced.

Operations to eliminate entrance door squeaks

Wanting to prevent doors from creaking in the future, they are looking for the reason for this. If the design of the door leaf stood in the apartment for a long time, then unwanted sounds could arise due to sudden changes in temperature.

This is especially true in autumn and winter. During these seasons, you won’t be able to get rid of the cause of the squeaks, but you can get rid of the consequences themselves. It is enough to take graphite powder or an ordinary pencil.

But home owners who have recently installed a new door may also encounter this problem. Very often, creaks appear due to the fact that the hinges hidden in the screws do not adhere closely to the jamb.

To stop unpleasant sounds from bothering you, you need matches and a screwdriver. You will also need PVA glue or regular wood glue.

You need to tighten the screws with a screwdriver, there is nothing difficult about it.

True, it is possible that the screws will turn. In order not to suffer with this, you need to pick up glue and matches.

The matches will play the role of a fastener that needs to be made by gluing them together.

Another reason for the appearance of squeaks is rust. It forms on the hinges if the house is damp. Therefore, the first thing you need to do is remove the rust.

Steps to get rid of squeaks in metal structures

The root cause of the iron door structure starting to squeak may be that the door leaf is sagging.

Metal is heavy, so its heaviness can lead to squeaks.

Special lubricating oil will help you no longer hear squeaking sounds. The reason for their occurrence may be improper installation of awnings.

In this case, you need to invite a specialist installation work. He is obliged to eliminate the malfunction, otherwise the door leaf may be deformed.

If, in addition to creaking, you feel that the door closes tightly, then this indicates that metal shavings or other debris have gotten into the grooves of the canopy.

You will need to dismantle the canvas and clean it, and then insert it back.

What to do if the plastic door on the balcony creaks?

The grinding noise can be caused by worn hinges or rust that has covered them.

Getting rid of rust is simple; you just need to open the balcony door and coat the fasteners with machine oil on the balcony side.

Hinges should be lubricated as follows:

Open the plastic balcony door structure and place a wedge under it;
Using the lever, you need to lift the blade up a little;
Opened rods and other elements of the plastic door structure should be lubricated oil composition. You don’t need to pour a lot of it, you just need a few drops, so it’s easier to use a syringe;
After this, it’s time to lower the canvas into place;
Remaining oil is removed with a cloth.

If attempts to eliminate the squeaks of the plastic structure did not lead to anything, this means that the fittings have served their purpose.

What means to eliminate squeaking?

The operation of eliminating squeaks is not at all difficult; thanks to machine oil, you can get rid of the squeaking forever. This is the most popular product and can be purchased at an auto parts store.

But there are other oils that can eliminate noise. You can simply use sunflower or olive oil.

True, the result will not last long, since such a product does not particularly clean the surface and contributes to clogging. Perhaps after a couple of days the already annoying squeak will appear again.

Therefore, experts do not recommend using oils; they can shorten the shelf life of fasteners.

There are options to do without oil. You can use solid oil. It should not be poured, it is better to apply it.

A wooden stick will help with this. If you have to smear the loops with your finger, be careful not to pinch your hand.

Graphite from a soft pencil will eliminate problems. The easiest way to extract graphite is to set the wood on fire.

The rod must be crushed and the grains poured into the hinge slots formed as a result of lifting the door structure.

When the blade is put into place, the graphite is crushed, turning into a lubricant to combat friction.

The slate chips will be completely crushed if you open and close the doors several times. This product provides excellent protection against rust.

The store sells special sprays suitable for lubricating various parts and mechanisms.

The most common is WD-40 aerosol. They need to spray the areas that are causing the squeaking. It will also come in handy when you need to lubricate the door lock.

The product must be applied locally and precisely, without leaving marks on the entire surface.

Wax or drops of paraffin from a candle can eliminate creaking sounds. In this case, you need to act carefully.

Additionally can be processed special means And door lock, because it can also cause problems.

It will help to not be afraid that one day the door lock will not let you into the house special care followed by periodic removal of dust from the lock mechanism.

Steps to take care of the lock well:

Spray a cleaning spray into the lock hole, which will flow out from the inside;
Dampen the lock cylinder with a cloth, place it there and immediately remove the key. This way the mechanism will not jam and dust will not spread inside;
After the key is pulled out, the larva is wiped again;
The pattern is repeated until dirt stops sticking to the key being removed;
After cleaning, you need to spray a couple of drops of oil into the well and turn the key.

As for the choice of lubricant, machine oil is also applied to the lock. But here it is important to consider the type of lock.

Lever or safe locks are lubricated with graphite dust. It is better not to use conventional lubricants, otherwise the key may get stuck without opening the lock.

A creaking car door is far from the most serious problem a motorist may encounter, but it is extremely unpleasant. If a driver constantly has to listen to the door hinges squeak when getting into and out of a car, this is clearly not a normal situation. You can easily get rid of such a problem if you lubricate the door hinges. Let's look at how to do this, as well as which lubricant is better to choose.

Table of contents:

How to lubricate car door hinges

It is advisable to apply lubricant to car door hinges as soon as possible after unpleasant squeaks appear when they move. Creaking occurs due to increased friction between the planes of the hinge; accordingly, increased friction leads to increased wear, which can be avoided if lubricant is applied in a timely manner. If you ignore this problem, over time, the door may “lean”, which will lead to difficulties when closing it.

Lubricating car door hinges is not as easy as it might seem at first glance. In this case, you need to do more than just apply a lubricant to the working mechanism. It is important to properly prepare the surface before doing this. Proceed according to the following algorithm:

Clean the surface to be lubricated beforehand from any contaminants that have formed. This can be done using, for example, a brush with coarse bristles. Since, in most cases, the dirt is “ingrained”, you can use white spirit or gasoline to dissolve it. If there are signs of corrosion, use a rust converter;
Once the surface is clean and dry, use a lubricant. We recommend not just “filling” the hinges, but lubricating the rubbing surfaces specifically;
After lubricating, open and close the door 20-25 times, using a rag to wipe off excess lubricant that leaks out during operation.

If the creaking persists after the hinges are lubricated, this may be due to sagging of the doors, poor-quality lubrication, poor surface cleaning, or because not all hinges are lubricated.

Please note: It is better to lubricate car door hinges when autumn period, when the heat has already ended, but the cold has not yet set in.

Which lubricant to choose for car door hinges

Greases are best suited for lubricating hinges. This is due to the fact that such funds have:

Excellent penetrating ability, which allows them to “break through” deep into the loop;
Long service life. Even when the lubricant evaporates, it remains on the surfaces of the film, which prevents squeaking and additionally protects the surfaces from friction;
The ability not to lose properties when working in different temperature ranges;
Minimum friction coefficient;
Additional anti-corrosion properties resulting from additives;
Low price.

Important: Drivers often lubricate car door hinges with a well-known liquid.WD40. Such actions will not lead to a positive result.

If there is no composite lubricant, you can use or. But it is important to note that their effectiveness will be significantly lower. Litol is a very “sticky” lubricant that attracts dust, sand, dirt and other debris that can harm rubbing surfaces. As for motor oil, its effect will not last long.

Another type of lubricant that may be suitable for car door hinges are silicone-based options. But it is better that silicone is not the base of the lubricant, but part of a multi-component product. The problem with silicone-based lubricants is that they are quickly washed out and their properties are lost at high temperatures.

Common lubricants for car door hinges

Let's consider several lubricant complexes that are often chosen for car door hinges:

This is only a small part of the lubricant complexes that can be used to lubricate car door hinges. In specialized automotive stores you can find a wide range of such lubricants.

At first, the squeaking of doors does not cause concern, but soon it becomes very loud and begins to get on your nerves. The reason may be wear or clogging of the hinges. It is necessary to lubricate the hinges so that the door stops squeaking. Doing this yourself is not at all difficult. However, not all products can be used to lubricate the door.

Door squeaks in an apartment can cause a lot of anxiety. First you need to identify the cause of the creaking:

Rusty hinges. This problem especially concerns street doors. Metal entrance structures are susceptible to corrosion due to high humidity.
Lack of lubrication. Over time, the lubricant thickens, spreads, or dries out. As a result, friction appears during the movement of the door, which causes squeaking. In this case, it is necessary to lubricate the hinges, otherwise they may block the door or break.
Incorrect lubrication. If the hinges are lubricated with a material that is not suitable for this purpose, the door will not open and close easily. As a result, friction of parts and squeaking will occur.
Wear. Typically, hinges serve the owner for many years. But even this reliable mechanism can wear out and fail over time. Then you will have to replace the hinges with new ones.
Clogged door mechanism. Creaking can be caused by accumulated dust, rust, and small debris clogged with it. In this case, you should simply clean the mechanism.
No special ball. To install metal gates, ordinary hinges are used, with a ball inserted inside them. If this part is missing for some reason, it must be purchased and placed inside the hinges.
Manufacturing defects. Consequences of marriage or incorrect installation doors usually appear immediately. These include: distortion of the structure (if the door is too heavy for the installed door frame), weak hinges, friction of the door leaf with the casing or the door frame with the casing.

Usually at home it is enough to lubricate the door so that it does not creak. But if there was a manufacturing defect or the door was installed incorrectly, it is recommended to contact a professional.

Prohibited means

Not all products can be used to lubricate door hinges. This may only make the problem worse.

butter;
vegetable oil;
edible fats;
petrolatum.

These remedies can get rid of the squeak, but not for long. Soon after lubrication, the door will begin to creak with renewed vigor, as the listed materials quickly dry out and erode.

In addition, after this the hinges may begin to rust and collapse.

What to lubricate with?

First you need to understand that it is not the door leaf itself that creaks, but the hinges. Moreover, the unpleasant sound is produced by those parts that come into contact with each other when the door moves. For example, metal creaks when the top of a hinge rubs against the bottom.

The means by which you can lubricate the door mechanism are the same for both interior plastic and wooden doors, and for metal entrance structures.

Machine oil

If the door at home begins to creak, it will be enough to lubricate the hinges with machine oil. It is important that the product is liquid, without compactions, mold or rancid odor.

Algorithm of actions:

open the door;
place an ax blade, a thick file or another wedge under its end;
slightly lift the door on its hinges using a substitute object;
lubricate the internal parts of the hinges with machine oil using an oil can or syringe;
lower the door leaf back onto the hinge pins;
pull the door vigorously up and down several times;
Wipe off excess machine oil with a rag.

Sometimes the door leaf is installed on permanent hinges. In this case, you can lubricate the mechanism without removing the door. To do this, lubricant must be applied between the hinge joints. Spray lubricant works well.

If it is discovered that the hinges are rusty, it is advisable to replace them with new ones, since over time the problem will only get worse.

Other means

If you don’t have machine oil on hand, you can use other means:

Solidol or Litol. These products have high density. Therefore, you need to apply them to the mechanism using a wooden or cotton swab. You can also lubricate the hinges with your fingers, but in this case you should be careful not to pinch your hand.
Graphite from a simple pencil. It is recommended to use a soft rod. The door will need to be lifted using a wedge as described above. The neck will need to be crushed and pieces placed between the half-loops. Then lower the door leaf back onto the hinges. As a result, the graphite pieces are crushed and a graphite lubricant is formed. This product copes well with friction.
WD-40 is a universal product available in oil or spray format. It can clean the door mechanism of small debris, prevent rust and ensure ease of door movement.
Ciatim is a multi-purpose remedy that will help get rid of squeaking.

These compounds are no less effective than machine oil.

Car doors

Car doors require special attention, since they are constantly exposed to the adverse effects of the environment.

Previously, they tried to get rid of squeaking using vinegar, iodine and even kerosene. But these remedies do not always give a guaranteed result and can even worsen the situation. Now there are many tools to solve the problem quickly and effectively.

When choosing a product, you need to pay attention to several aspects:

Ease of application. It is advisable to purchase products with a thin nose.
Formation after applying a protective film.
Resistance to high humidity and frost resistance.
Anti-corrosion properties.

Particularly popular are special silicone lubricants that allow you to treat not only hinges, but also door locks.

Before applying the product, the hinges should be washed from dirt and dust and degreased with gasoline. Then apply the composition.

This procedure should be carried out in early autumn and late spring. Then the protective effect will extend to the most unfavorable months.

It is necessary to regularly check the condition of the hinges and lubricate them with suitable products.

Surely, everyone has at least once encountered a situation when the door in a house began to creak, disturbing the peace of its residents. This problem affects not only heavy entrance and interior doors, but also ordinary cabinet doors.

Getting rid of the unpleasant creaking of hinges is quite simple, but to prevent its occurrence again, it is better to find out possible reason occurrence of a disturbing sound.

The main reasons for squeaking doors have long been known.

Hinge corrosion is one of the most common causes of door squeaks. This is especially true for street entrance structures made of metal. Dampness and adverse weather conditions can, over time, cause the hinges to rust. This, in turn, gradually destroys the iron, impedes the movement of elements and, as a result, leads to creaking.
Insufficient amount of special lubricant is another common cause of door squeaking. To ensure easy movement of the door leaf, it is necessary to additionally lubricate the door hinges. However, over time, the lubricant tends to thicken. It may also spread or simply dry out. The result is the appearance of friction between the hinge elements during movement and a creaking mechanism. Over time, the problem may worsen even more: prolonged rubbing of parts can lead to blocking of the mechanism, or even to its breakdown.
Using the wrong lubricant. If the hinges are treated with a lubricant that is not suitable for its intended purpose, then it is likely that its action will not be effective and will not be able to ensure the necessary ease of operation of the mechanism. The consequence is the same outcome described above.
Wear of parts. Typically, the hinge mechanism serves faithfully for many years. However, over time it may break. Especially if during operation the rules for preventing wear were not followed. IN in this case, the problem in the operation of the mechanism is eliminated by replacing the mechanism itself.
Clogged hinges are also not a rare cause of squeaking. Dust, rust and other debris - all this can clog the mechanism or absorb lubricant, and, as a result, a squeaky door.
The loops are not equipped with a special ball. When setting the input metal doors or gates, ordinary loops are used, inside of which a ball of the required diameter is placed. The absence of this element may cause squeaking. To eliminate it, it is enough to complete the mechanism with the missing part, having first removed the door from its hinges, and then install it back.
Structural flaws or errors made when installing a doorway are the most time-consuming problem to solve. Usually, the consequences of improper installation appear immediately or make themselves felt from the first days of operation. The most common installation errors that lead to unpleasant consequences are described below:

distortion of the structure - can occur if the door is very heavy (the outcome of such a situation is not only damage to the hinges and a creaky door, but also a loose door frame);
incorrectly or poorly installed hinges;
contact of the fabric with the covering, door frame and platband.

How to lubricate a door so it doesn't squeak

As previously mentioned, often the reason for squeaking door hinges lies in a lack of lubrication. You can replenish it with special lubricants; fortunately, there are a great many of them in stores.

The following lubricants can be considered the most effective.

WD-40 is a universal lubricant, available in the form of a spray and oil. It copes with the task perfectly: it ensures ease of movement of elements, cleans the mechanism of dirt and prevents the formation of corrosion.
Solidol is a high-density grease. Very popular for processing any moving mechanisms.
Litol is a lubricant known for its frost resistance and waterproof quality. Often used in outdoor work.
Tsiatim is another one effective remedy in the form of a multi-purpose lubricant, which will help if there is a squeaky door in the house.

What else can you lubricate door hinges to make them squeak?

In addition to special industrial lubricants, other methods for processing hinges using available household products are known.

Among them:

vegetable oils;
petrolatum;
wax, paraffin;
pencil lead.

However, it is worth noting that these funds are ineffective. Usually, after a few days the squeak returns again. In addition, dietary fats such as petroleum jelly attract dust and contaminate the lubricated mechanism, which contributes to the formation of rust.

The process of treating the hinge mechanism with a lubricant is very simple. Although a beginner might still need a few tips on how to lubricate door hinges.

The most convenient way is to lubricate door hinges with a special nozzle with a tube, like the WD-40 spray discussed above. If you don’t have one, then a simple syringe will do the job.
Excess lubricant should be removed with a dry cloth.
Parts that show abrasion require increased attention. They should be cleaned of dirt and thoroughly treated with lubricant.
The main hinge mechanism is located inside, so this part needs to be lubricated especially well.

How to lubricate hinges of interior doors and more

It should be said that the process of applying lubricant to the hinges is the same for any door, be it interior, metal or balcony. The processing progress may vary only depending on the type of loops installed.

Processing split hinges

Processing the hinges will be most effective if the door is removed. To do this, the door needs to be lifted, for example, using a crowbar. Then apply lubricant to all elements of the hinge mechanism, both on the leaf and on the door frame.

After this, the door is hung back. In order for the product to be distributed evenly in the mechanism, the door must be opened and closed several times. Wipe off excess lubricant with a dry cloth.

Processing of permanent hinges

If the door is installed on permanent hinges (also called universal hinges), then the lubricating compound is applied to the gaps between the hinges.

Caring for fittings

The occurrence of squeaking door hinges can be avoided if they are periodically cleaned of dirt and treated. This will prevent abrasion of parts and corrosion. If the hinges are already susceptible to corrosion, they should be cleaned with a special rust-corroding agent.

You can tolerate a creaking door for a long time, but sooner or later you will get so tired of this high-frequency sound that you will want to get rid of it once and for all. But how to lubricate door hinges so that they don’t squeak for as long as possible?

There are quite a few options for lubricating door hinges. The best way is to use machine oil. Moreover, if you don’t have a car, you don’t have to buy a whole canister.

In hardware stores you can find household motor oil for sale, which is sold in small plastic tubes. It is intended for sewing machines, locks and other mechanisms, accordingly, does an excellent job of lubricating door hinges.

The price of a tube of this oil is 30-50 rubles. As practice shows, it is sufficient for household use.

But what to do if you don’t have such oil on hand, and you can no longer endure the creaking of doors?

You can solve the problem in the following ways:

W.D.. If you have this product, you can safely treat the hinges with it, and the creaking will disappear for a long time. If you don’t have it, we recommend purchasing it, since it can be used not only for lubricating mechanisms, but, as they say, “for all occasions.” In particular, WD40 allows you to remove rust from threaded connections and then easily unscrew them, clean the surfaces of glue, paint, etc.;

Graphite lubricant. This is probably one of the best solutions for lubricating hinges, as it allows you to get rid of squeaks for many years;

Silicone Grease. It is also a long-lasting lubricant, which is a good alternative to graphite lubricant. It can be especially recommended for external doors, since it is not afraid of frost or, in fact, high temperatures;

Solidol/Litol. These lubricants also do an excellent job of eliminating squeaks. However, due to their thickness, working with them is not very convenient. But if you take apart the hinges and coat the axles with grease, you will forget about squeaks for many years.

You can, of course, lubricate the hinges with grease and superficially, i.e. without disassembling the hinges, but such a measure will only help for a short time, since the composition will not penetrate deeply;

Graphite pencil. This tool can be used if there are no lubricants on hand at all. Graphite has excellent sliding properties, so it eliminates squeaks well, especially if the pencil is soft.

The only thing is that the squeaks will disappear for a short time, since the graphite spills out quite quickly. However, such a measure is enough to temporarily solve the problem until you purchase a more reliable product;

Butter or lard. Use these products only as a last resort, to temporarily eliminate squeaks, if you have nothing else at hand.

Advice! Under no circumstances use vegetable oils, especially sunflower oil, to treat hinges and other metal mechanisms. It only allows you to temporarily get rid of squeaks. In this case, the treated surface very quickly begins to rust, as a result of which the problem is greatly aggravated, for example, lubricated sunflower oil The locks stop working altogether.

Lubrication technology

We've figured out the means, now let's look at how to lubricate door hinges with their help.

You can perform this operation in two ways:

Superficially, without disassembling the loops;
Capital, i.e. in disassembled form.

Lubricate without disassembling

Most often there is a need to quickly lubricate hinges without disassembling them.

In this case, the technology depends on the type of product you will use:

Illustrations	Actions
	If you want to lubricate with household oil, it is best to do this with a syringe or a special oiler. Tubes of oil for these purposes usually have a thin nozzle. Working with it is not as convenient as using a syringe, but it is also possible.
	Using oil, follow these steps: Carefully lubricate all the cracks, trying to inject the oil inside so that it flows all the way to the rod; Operate the door to allow the liquid to flow; Repeat the procedure to achieve the greatest effect.
	To lubricate the loop with WD40, you need to put a special tube attachment on the sprayer, which is included in the kit. Next, you just need to press the spray button and inject the product into all the cracks of the movable hinge element, as shown in the photo. Note! WD40 contains a toxic organic solvent - white spirit. Therefore, after lubricating the door, it is advisable to ventilate the room.
	There are two ways to lubricate the canopy with graphite: Crush the pencil lead until it becomes powdery and rub it into the crevices with your finger. Note! Canopies are lubricated with grease in the same way.
	If there is no gap, or it is too small, lift the door slightly with a lever (an axe, a crowbar, or a crowbar) and insert a piece of pencil lead into the gap formed. Then you need to lower the door and rotate the hinge with it. As a result, the rod will be crushed, and the powder will lubricate all rubbing areas.
	Note! The second method is not suitable for all types of canopies. In such cases, you cannot do without disassembling the hinges.
	Another option is to use a hammer and nail to knock the axle out of the hinge to apply lubricant.

Please note that all these methods only allow you to temporarily get rid of squeaks. Those. Six months/year will pass, and we will have to return to the problem of creaking doors. In some cases, if the cause of the squeak is debris clogged in the hinge, surface lubrication may not help much at all.

Therefore, if you want to lubricate the awnings once and for all, you need to disassemble them.

Advice! When lubricating the hinges, immediately lubricate the lock, since its moving mechanisms also require periodic maintenance.

Lubricate the disassembled hinges

The instructions for major lubrication look like this:

Illustrations	Actions
	As a rule, canopies consist of two cards (plates) that are connected by an axis. To disassemble them, you need to unscrew the lock, which is located at the lower end of the axle, and then pull out the axle with pliers. If the axle does not come out, do not try to knock it out with a hammer, as in this case you risk damaging the hinge and the door leaf. It is better to treat it with WD40 and wait a while for the product to eat away the rust. Advice! To avoid removing the door, do not disassemble two hinges at once. First, lubricate and assemble one, and then the other.
	Clean the axle from dust and dirt. This is very important, as we have already said, the cause of squeaking is often debris caught in the moving mechanism. Then follow these steps: Thoroughly lubricate the axle with graphite lubricant, silicone or, for example, grease. Do the same work with your own hands with the loops themselves.
	Assemble the hinge by inserting the rod and rotate the cards around the axis, closing and opening the door. This will squeeze out excess lubricant.
	Wipe the surface of the canopy with a rag and remove excess grease.

The cause of the squeak may be a bent rod. Therefore, after removal, carefully inspect it and, if necessary, level it with a hammer.

It must be said that some models of canopies do not have a removable axle. To disassemble them, you need to lift the door or first remove the canopy by unscrewing the screws from the door panel or frame. Otherwise, the process of treating them with lubricant is carried out according to the principle described above.

There are also generally non-separable versions of hinges. Accordingly, they can only be lubricated superficially.

Conclusion

Now you know how to lubricate door hinges, and you can use both improvised means and special compounds for this. Finally, we recommend watching the video in this article to visually familiarize yourself with this procedure.