Even if you have put your area in perfect order, you can always improve and add something. After all, decorative elements are appropriate not only indoors, but also in the garden.

And the space around trees can be used, for example. Varied plastic beds will harmoniously complement the interior of your site and help organize plants and provide them with correct height and even wintering.

What are the advantages

In addition to the obvious aesthetic completeness of your site, fences for garden beds carry a lot of useful purposes:

• do not give perennial plants grow too much;
• protect from falling soil on raised and loose areas;
• prevent penetration;
• will protect plants from various mechanical damage, be it mowing grass or the paws of your pets.

Products made from atmospheric plastic, in turn, have a number of advantages over fencing made from other materials:

• plastic fences tolerate temperature changes well, and they can be installed permanently and not return to this issue next season;
• plastic - a synthetic material that is resistant to exposure to sunlight and does not decompose;
• such fences hold their shape very well, allowing you to create a wide variety of shapes and figures;
• affordable cost and ease of installation.

Types and installation of plastic fencing

There are many variations of plastic fences for garden beds; they differ both in appearance and have different purposes. It is necessary to clearly formulate the task that will be performed plastic fencing.

And whether it is a purely aesthetic function or the fight against plant growth on yours, you will choose the appropriate option.

Such plastic fences have a fairly extensive color scheme, and also differ in their texture. Thanks to their flexibility and plasticity, a wide variety of configurations can be created. The width of the border tape is from 10 to 90 cm, and the thickness is 1.2 cm.

With the help of this you can easily decorate a flower bed and mark paths in your summer cottage.
Installing the curb strip does not require any special skills or tools. You just need to think over the shape of the future composition, dig a recess around the perimeter of the drawing and install plastic tape there. You can fasten the edges using liquid nails or a blowtorch.

Then simply cover the trench with soil. The only downside of such a fence is its relative fragility.

Garden "board"

Such panels are more durable than curb tape and less vulnerable to mechanical damage, as they are made of durable plastic with a thickness of at least 15 cm.

Due to this, the range of applications for such fences is expanding. You can use beds made of plastic boards to simulate multi-level flower beds and children's sandboxes.

Important! Garden board is indispensable assistant when creating a greenhouse due to its strength and resistance to temperature changes, and also due to the fact that stretching a film or other frame is not difficult.

There will be no problems with the installation of such a fence. The panels are equipped with grooves and projections and are easily fastened together. Then, using the pegs (which come with the kit), you need to secure the fence, and you're done!

Flexible border

Flexible consists of plastic elements that are easily connected to each other. This type of decorative fence is suitable for flower beds, fencing trees and paths. To install it, you only need to fasten the elements together and install it on the ground using its pointed tips.

You can also construct a convenient and practical fencing for garden beds with your own hands from plastic panels. They are very easy to install, fastened with latches like a construction set.

Lightweight but durable plastic will last for quite a long time. Such fences can be smooth or embossed, and also have different colors. You can create both low and low beds from plastic panels.

Fencing "Labyrinth"

This type of fence is ideal for separating a flowerbed from a flowerbed. Thanks to this design, your plants will be reliably protected from damage. A original design, which imitates a stone fence, will be a wonderful decoration for your site.

Did you know? From the remaining bottle caps you can make unique designer items with your own hands - lay out a mosaic around a flower bed or create figurines for decoration.

A plastic mesh can serve as a fence for the garden bed. This one will serve reliable protection your plants and will decorate your flower garden or. It is easy to install and will last you for several seasons. Grids are available for raised beds, and lower.

From this article you can learn the features of such products as beds made of plastic boards: scope of application, pros and cons of structures made on their basis, types of plastic fencing, as well as their technical and performance characteristics. The reader will become familiar with the specifics of plastic panels, borders, strips, design products, as well as fences made from wood-polymer composite.

Enclosing structures for garden beds are presented in a wide range on the market in finished form. Plastic products are the most common and in demand among owners of summer cottages. This success is due not only to the low cost, but also to the practicality, durability of these structures, as well as many additional advantages, due to which they outperform wood, metal or stone.

One of the main advantages of plastic is its low cost.

Note! A polyvinyl chloride (PVC) board is capable of 100% retaining moisture received by the soil during watering or rain inside the structure.

Why is it profitable to buy plastic fencing for flower beds and beds?

Plastic products are characterized by versatility and a lot of advantages, which are appreciated by many summer residents.

Advantages of plastic products:

• practicality - the products are light in weight, which allows them to be used even on loose soil. On top of a bed made of a solid plastic board, you can pour a fairly high layer of soil. If necessary, the dimensional parameters of the sides, in particular the height, can be increased by adding additional parts;
• aesthetics and a wide choice of designs are available to customers various options borders or fences made of plastic, on the basis of which you can create beds of unusual curved shapes;

• durability - plastic products are not subject to the negative effects of corrosion, they remain in their original form for many years, without reacting to moisture and other negative environmental factors;
• the ability to retain color for a long time - products made from high-quality atmospheric plastic are not subject to fading in the sun. Even under prolonged exposure ultraviolet rays plastic elements will retain their original color and shape;
• wide scope of application - a wide range of products with different configurations and colors allows you to support any exterior of the house and create a unique one in the yard landscape design. Plastic structures are used for zoning the yard, forming decorative fences to highlight a garden bed or sidewalk path, as well as to focus attention on individual objects;

• simple installation system - installation and dismantling of products does not cause any difficulties, and the structures themselves are mobile and can be used repeatedly.

Types of garden fencing for flower beds and plastic beds

Plastic bed structures are made from a special material that does not release toxic substances into the soil even when heated. Modern products have improved characteristics. Thanks to this, the owner of the site can buy fences for garden beds that are not afraid of high or low temperatures.

Note! When exposed to frost, structures do not become cracked, and direct sunlight is not able to melt them. Therefore, plastic beds can be used in any climatic conditions without fear that they will deteriorate.

The artificial origin of the material is also associated with some advantages. Firstly, insects cannot damage the products because they are not attracted to them. Secondly, plastic is not subject to processes such as rotting or corrosion. Thirdly, the material does not have comfortable conditions for mold development.

You can buy designs for plastic garden beds in any specialized store; the market offer includes several categories of products:

• plastic border tape;
• flexible fencing called garden constructor;
• “Garden board” panels made of polyvinyl chloride;
• fencing in the form of a plastic mesh.

There are many variations of plastic fencing for garden beds on sale; you can buy these types of products in any color and size. Some types of designs realistically imitate natural materials, for example, wood or stone, without having their disadvantages.

Features of plastic borders for beds in the form of a tape

Plastic fencing in the form of a tape is widely used by summer residents to organize beds and flower beds on the site. Due to the flexibility of the material, the products allow you to create designs with outlines of various shapes. There are varieties on sale, the width of which varies between 0.1-0.5 m. This height is quite enough to create raised beds on the territory.

The plastic tape protects the embankment from being washed away by water when the garden is watered or heavy rain falls. In such conditions, the root system of plants will remain in place, it is reliably protected from damage by streams.

Helpful advice! If it is necessary to limit the growth of bushes on a site, for these purposes it is recommended to buy a plastic border for large-width beds; for zoning lawns, organizing flower beds and ornamental vegetable gardens, as well as forming embankment paths, it is more advisable to use narrow tapes.

The process of installing curb tape does not require experience or special skills. Any summer resident can cope with this task. The product comes with a manufacturer's instruction manual detailed description procedures and a set of stakes for fixing the curb. To install the tape, just dig a shallow trench around the perimeter of the future bed. Then the tape should be tightened; it is advisable that this manipulation be performed by two people.

After the tape is placed in the trench, stakes are installed on the sides to secure it in the required position. All that remains is to fill the ditch with earth and compact it thoroughly. To make the structure of the bed continuous, you should connect the edges of the tape with staples using a stapler. Such a bed can last for several years. If necessary, it can be easily removed from the ground and moved to another place.

What fences you can buy for beds in the form of ribbons: features of the range and prices

Landscape designers and owners of summer cottages give preference to border strips for the reason that this type products have increased flexibility. Using plastic borders, you can create unusual flower beds and beds of bizarre shapes; tapes are great for forming curved lines. The price of the material is low, and the extensive range opens up new design possibilities.

By purchasing ribbons of different widths, you can create multi-tiered beds or flower beds on your site, which, due to their decorativeness and compactness, are in high demand among summer residents. Products are available in various colors. A multi-tiered bed design will look more impressive if the sides of each tier have a different shade.

Average prices for curb tape:

Name of product	Manufacturer brand	Product Features	Price, rub./roll
B-15/9	Protect	corrugated, brown/khaki	234
B-20/9		corrugated, brown/khaki	299
B-30/10		smooth, brown/khaki	657
B-50/10		smooth, khaki color	1099
B-20/30		smooth, brown color	1315
B-20/30		smooth, khaki color	1440
B-30/30		smooth, brown color	1950
B-30/30		smooth, khaki color	2175
B-1000.2.11-PP	Standardpark	smooth, black	810
B-300.8,54,5-PP		carved, black	840
B-1000.2.11-PP		smooth, green color	950
B-1000.2.11-PP		smooth, brown color	950

Helpful advice! To create a calm atmosphere in the area, it is recommended to use ribbons of dark colors. To place accents around certain objects, it is better to use bright borders, for example, orange, yellow, red.

Beds made of plastic boards: product specificity

Despite the fact that curb tape has many beneficial properties, it is not capable of becoming an alternative to rigid fencing. The design of beds made of PVC panels can withstand high pressure soil, a random gift of a shovel or other garden tool while cultivating the garden. This type of product is called “Garden Board”.

Externally, the products look like panels. Their length may vary, but the maximum limit for this indicator is 3 m. The width of the board is no more than 15 cm. The end parts of the boards have fasteners and grooves that significantly simplify and speed up the process of assembling the beds. Thanks to this system, structures of any size can be created.

Assembling beds from plastic boards carried out taking into account the manufacturer's instructions. The set of products, in addition to the panels, includes stakes made of plastic. To construct a bed, it is enough to connect the boards together using protruding fasteners and grooved recesses. After assembly, the product is installed on the ground and fixed with plastic stakes that are driven into the ground. At the end of this process, decorative plugs are installed at the fastening points to prevent soil from getting into these holes.

At what price can you buy ready-made plastic beds for the garden and how to use them

Plastic boards are used for the construction of flower beds and beds on personal plot. In addition, this type of product can be used for landscaping the local area, fencing a sandbox on a children's playground, an area intended for recreation, lawns and other objects. The panels are highly durable. The surface of the products is smooth.

Sets of fencing for garden beds made of plastic panels can be purchased ready-made. Manufacturers offer dozens of colors, so summer residents have the opportunity to create interesting compositions. The products are not afraid of temperature changes and prevent soil erosion. The only disadvantage of such beds is their high cost.

Note! Plastic garden boards can be used as fencing for greenhouses and greenhouses. The panels are suitable for installing the frame part and are able to withstand the load of the entire structure.

Average prices for beds made of plastic panels:

Dimensions, cm	Weight, kg	Price of a colored product, rub.	Price of gray product, rub.
200x70	12,5	2760	2500
200x80	13	2840	2545
200x90	13,5	2910	2610
200x100	14	3000	2680

Garden constructor

A garden set is one of the types of fencing for garden beds made of plastic. This type of product makes it possible to show your imagination and build a beautiful decorative vegetable garden or flower bed, and of absolutely any size and shape. A garden set is a set of plastic parts that are connected in a certain way. As a rule, the manufacturer's instructions, which are included in each package, describe this entire process in detail.

As a result of the assembly, a solid structure is obtained in the form of a side, which is used to form a bed and fix the soil. The main advantage of the garden designer is its versatility. Unlike garden boards, the design elements allow you to create both large and small fencing on the site, depending on the needs of the owner. The finished structure perfectly retains the soil within the garden bed, as well as moisture, necessary for plants for development.

Note! The products are lightweight, so there are no restrictions regarding soil conditions. Such beds can be installed in areas with loose or loose soil.

The garden constructor is successfully used to create multi-tiered structures. To give your garden bed or flower bed an unusual look appearance you can form curved lines or achieve asymmetry in terms of shapes (to do this, it is enough to shift the tiers relative to each other). The installation process is extremely simple: just buy plastic beds in the required quantity, connect the parts together using fasteners and install them on the site.

Related article:

Interesting design ideas summer cottage and greenhouses. Using scrap materials to create an unusual design beds

Price of a garden designer for beds:

Product size (height/length), cm	Product color	price, rub.
15x300	brown	760
15x300	green	760
21x300	brown	840
21x300	terracotta	860

Unusual options for fencing for beds made of plastic panels

In addition to standard plastic fencing, there are many options for products with unusual design. For example, a garden labyrinth consists of plastic elements that imitate real stones. The products are gray in color. Despite its lightness, this plastic fencing is durable and resistant to negative weather factors.

The garden labyrinth has a wide range of applications; it is used for zoning various objects on the site:

• flower beds;
• beds;
• and decorative reservoirs (ponds);
• flower beds;
• paths;
• landscape design elements;
• lawns.

The labyrinth border looks discreet and does not catch the eye; it will optimally fit into the space of any summer cottage. Sections made of plastic easily go deep into the soil. Most often, a set consists of several elements. Their height is 0.08 m, and the total length of the set is 3 m.

Note! The garden labyrinth has a special ledge and recesses, thanks to which you can mow the grass into the beds without interference. At the same time, all vegetation on the border of the garden is protected from the growth of weeds.

There are other options for plastic fencing with imitation:

• bricks;
• metal fence with interesting colors;
• forged fences with openwork design;
• colored picket fence;
• wicker fence made of vines.

There are also decorative fences in the form plastic flowers and other objects.

Features of beds made of WPC: characteristics and advantages of products

Many summer residents resort to building beds from boards made from wood-polymer composite (WPC).

Such products have several significant advantages:

1. A simple assembly and disassembly system that uses a special fastening system.
2. Durability inherent in all polymer products.
3. Aesthetic appearance - products made from wood-polymer composite imitate real wooden board. The material lends itself well to the dyeing procedure, so there are many color variations on sale.
4. The ability to create flower beds and beds of unusual shapes.
5. Smooth surface of products.
6. The opportunity to achieve savings in the construction of beds by purchasing WPC panels instead of expensive materials, which are superior in characteristics to ordinary wooden boards.
7. Simple care system and practicality.

Beds made from WPC panels are characterized by high quality and support the colors of natural wood species, as well as their natural texture. The material has few disadvantages, but they still exist. With prolonged contact with moisture, the structure tends to absorb it, which can cause mold to form.

Note! It is recommended to treat the products with a special protective composition to prevent the destruction of the panels under the influence of ultraviolet radiation.

Technical characteristics of fencing for beds made of WPC

To make WPC panels, a mixture consisting of plastic and wood flour is used, so this type of material can be called relatively natural when compared with PVC products. After mixing the components, a polymerization process occurs, as a result of which the panels acquire new properties, so designs of such beds are widely used in suburban construction.

Product specifications:

Characteristic	Index
Material density, kg/dm³	1,4
Tensile elongation percentage, %	0,5-1
Bending resistance, MPa	25-60
Impact strength level, kJ/m² (Charpy)	3-4

In the process of assembling beds, two types of parts are used: the board itself and the hinge with rotating mechanism. To fix the structure, there are special pegs that connect the elements together, and are also used to increase the height if it is necessary to increase this figure.

The mesh, as a fencing for garden beds, is not as popular as previous product options. But it also has its advantages. This type of fencing will come in handy if children are playing with a ball in the area. A soft plastic net stretched between the supports will protect the plants from damage.

Features of assembling beds from plastic panels with your own hands

To build beds from WPC panels you will need a set of boards and logs that will be used as posts. In addition, you should stock up on decorative plugs that will prevent debris and dirt from getting into the rotary hinge mechanism, as well as corners that will cover the outer corners.

Technology for making beds:

1. Wood-polymer composite boards are cut into pieces required size. The length of the segments is selected taking into account the dimensions of the future bed.
2. The height of the corner posts should be 0.2 m higher than the upper limit of the fence, the difference in the same indicator for the internal posts is 0.5 m.
3. The boards are fastened together in a seamless manner. A similar result is achieved by installing one panel into another as tightly as possible. Gaps are not allowed. To save money, it is allowed to use wooden blocks or metal corners as support posts.

Helpful advice! The panels can be fastened at different angles, which makes it possible to experiment with the shapes of the beds. The minimum acceptable angle is 60º.

After assembly, the box made of WPC panels is fixed on the corner supports so that the free section of the support, exceeding the height of the fence, is located below. It will subsequently be buried in the ground. The formed frame must be carefully transferred to the place where the bed will be organized, and the structure must be aligned diagonally.

After this, the installation locations for the corner supports are determined, the box is installed in accordance with these markings, and intermediate posts are placed inside the structure. It is recommended to use self-tapping screws to secure the boards to the supports. At the end of the work, the corners are cut and fixed with self-tapping screws.

Most structures made of plastic are supplied almost ready-made. The technologies for assembling such elements are very simple and most often consist only of sequential connection of the elements available in the set. For this reason, plastic fencing for garden beds is so popular.

Working in the garden beds requires a lot of physical effort and time, and the harvest does not always correspond to the efforts made. Therefore, more and more summer residents are installing high beds on their plots, which can significantly reduce labor costs and grow a good harvest.

Benefits of raised beds

A high bed is a box with a height of 10–15 cm and up to half a meter, which is filled with earth, compost, and rotted manure. The size and shape of the box can be any. Most often it is made rectangular. The width should be planned so that it is convenient to care for the plants. The usual width is 50–80 cm. The passages between the beds are sown lawn grass, covered with sand, sawdust or concrete. As a result, weeds do not grow in the aisles, the mowed grass is used for mulching, and the entire garden looks beautiful and tidy. This is far from the only advantage of raised garden beds. There are many advantages here:

• Any area is suitable for setting up a vegetable garden, even one completely unsuitable for farming;
• tedious digging and weeding is replaced by light loosening of the top layer of soil;
• high beds warm up faster in the spring, which allows you to get a harvest much earlier and plant crops that do not ripen in a given area in ordinary beds;
• in a high, mulched bed, weeds almost do not grow, and water does not spill under the gardener’s feet when watering;
• it is easy to make drainage on it; this is necessary when growing garden crops, which cannot tolerate high groundwater;
• It is easy to strengthen covering material on the sides to protect plants from frost;
• if there are shrews or shrews on the site, cover the bottom of the bed plastic mesh with a dense cell, and voracious pests will not reach the plantings;
• The bed itself can be easily disassembled for moving to another location, resizing or repair.

All gardeners will appreciate the convenience of a high bed, because during work you will not have to bend down almost to ground level.

Attach a wide transverse board to the ends of the bed, and you will have a comfortable bench on which you can place your equipment or sit down to admire the results of your labors.

How to turn the disadvantages of raised beds into their advantages

The creation of such beds brings the greatest benefit in a damp, cool climate. But in dry conditions southern regions their advantages are not so obvious - the earth in a raised box overheats and dries out faster. This is their main drawback. However, even in such conditions, the construction of high ridges will be justified if the soil on the site is infertile - rocky, clayey or sandy. The box for protection against overheating is built from light materials and filled with imported soil. In the midday heat, a white cloth or agrofibre cloth is pulled over the box. This canopy reduces the temperature of the soil and air in the garden bed and reduces water evaporation.

In the southern regions, construction from inexpensive natural stone- shell rock. If you build sides from it, the bed will last a very long time, and the soil in it will be cool in any heat. This building looks extremely beautiful.

See for yourself how attractive the raised beds look in the photo, built with your own hands from natural stone at the dacha.

What materials are suitable for construction

Raised beds don't have to be so monumental. Almost any device is suitable for their device. Construction Materials. The main thing is that they do not let water through and keep their shape.

Raised beds made of slate are popular. Slate does not rot, is waterproof, and almost does not heat up in the sun. To arrange a raised ridge, it is not necessary to buy new slate; one removed from the roof after its repair is quite suitable.

It’s even easier to make raised beds from plastic panels. Unlike slate, plastic does not splinter from a slight blow, and installation does not require great care. A border made of light plastic along the edges of the bed looks neat and attractive.

High beds in a greenhouse are very convenient. Already in April, they can harvest the first radish harvest.

It is always difficult in greenhouses, since they are usually used for growing a limited set vegetable crops– tomatoes, cucumbers, eggplants. Therefore, they have to change the soil more often. It is much more convenient to do this on high beds.

How to make raised beds from boards with your own hands

If the idea of ​​building raised beds with your own hands has inspired you, step-by-step instruction will help you do everything without errors.

To build a wooden box for a high bed measuring 4000x60x30 cm, we will need:

• edged board 2.5 cm thick and 15 cm wide – 18.4 linear meters;
• galvanized square pipe or corner 2x2 cm;
• self-tapping screws

You also need to prepare tools - a saw, a screwdriver, an angle grinder, a drill, a square, a pencil.

We measure 4 pieces of 4 m each for the long sides of the box and 4 pieces of 0.6 m each for the end sides and cut them off.

Sawn boards should be coated with antiseptic on all sides and wait until completely dry. The products “Ognebioshchit”, “Senezh”, “Pinotex” and others are suitable. Without such wood treatment, raised beds made from boards will not last long.

We cut the metal profile using a grinder into pieces of 0.4 m for the corners of the box and 0.6 m for the screed of the long sides. Screeds must be made every 1–1.5 m so that the bed is not bursting with earth. For one box you need 4 pieces of 0.4 m each for the corners. For the ties, you will need approximately 4 pieces for the vertical tie and 2 more for the horizontal one. Horizontal sections are fastened to vertical ones at the level of the top board.

We drill holes in the profile for self-tapping screws. There must be at least two of them for each board. After this, we attach the profile to the end boards with self-tapping screws. Next, you need to connect the assembled end elements to the long boards in the same way. One side of the profile will be 10 cm longer than the width of the box. It will be recessed into the ground to stabilize the box.

On each long side, at the same distance, mark the places for the ties. Short pieces are screwed to the boards, and long pieces are fastened to short pieces. Each tie looks like the letter “P”, screwed to the long sides of the box with vertical bars.

If the high bed is planned to be covered with film or other covering material, the structure is supplemented with arcs. The most reliable ones are metal ones, so that they can withstand the weight of tied tomatoes or cucumbers. For this purpose, an iron rod with a diameter of 8 mm and a length of at least 3 m is used. Each section of the rod is shaped into a semicircle in its central part, leaving the ends straight. The arcs can be structurally connected to the ties by fastening them with staples.

The finished structure is transferred to permanent place, which was cleared and leveled in advance.

The tops of the arcs can be connected with strong twine if desired. This way the covering material will stick better and tying up the plants will become easier.

Now you know how to make raised garden beds with your own hands. Using the same principle, it is easy to make them from any other suitable material.

How to make a raised bed warm

We have already seen the benefits of installing raised beds in the country. But such a bed can become twice as effective if you make it warm. All heat-loving crops They grow faster in such a bed and bear fruit better. Setting up a warm bed resembles a layer cake:

• coarse organic matter is laid down - branches, leaves, bark;
• semi-rotted compost or manure goes into the middle layer;
• The top of the pie is covered with a layer of garden soil.

Under the top layer, organic matter begins to decompose with the release of heat, that is, it warms the plants from below, from the cold earth. If such a bed is mulched after planting, caring for it will come down to rare watering and harvesting, which will invariably please you, because all plants love warmth and an abundance of organic matter in the soil.

Video instructions for making a raised bed

From this article you can learn the features of such products as beds made of plastic boards: scope of application, pros and cons of structures made on their basis, types of plastic fencing, as well as their technical and operational characteristics. The reader will become familiar with the specifics of plastic panels, borders, strips, design products, as well as fences made from wood-polymer composite.

Advantages of plastic beds in a summer cottage

Enclosing structures for garden beds are presented in a wide range on the market in finished form. Plastic products are the most common and in demand among owners of summer cottages. This success is due not only to the low cost, but also to the practicality, durability of these structures, as well as many additional advantages, due to which they outperform wood, metal or stone.

One of the main advantages of plastic is its low cost.

Why is it profitable to buy plastic fencing for flower beds and beds?

Plastic products are characterized by versatility and a lot of advantages, which are appreciated by many summer residents.

Advantages of plastic products:

• practicality - the products are light in weight, which allows them to be used even on loose soil. On top of a bed made of a solid plastic board, you can pour a fairly high layer of soil. If necessary, the dimensional parameters of the sides, in particular the height, can be increased by adding additional parts;
• aesthetics and a wide choice of design - buyers have access to various options for borders or plastic fences, on the basis of which they can create beds of unusual curved shapes;

• durability - plastic products are not subject to the negative effects of corrosion, they remain in their original form for many years, without reacting to moisture and other negative environmental factors;
• the ability to retain color for a long time - products made from high-quality atmospheric plastic are not subject to fading in the sun. Even under prolonged exposure to ultraviolet rays, plastic elements will retain their original color and shape;
• Wide scope of application - a wide range of products with different configurations and colors allows you to support any exterior of the house and create a unique landscape design in the yard. Plastic structures are used for zoning the yard, forming decorative fences to highlight a garden bed or sidewalk, as well as to focus attention on individual objects;

• simple installation system - installation and dismantling of products does not cause any difficulties, and the structures themselves are mobile and can be used repeatedly.

Types of garden fencing for flower beds and plastic beds

Plastic bed structures are made from a special material that does not release toxic substances into the soil even when heated. Modern products have improved characteristics. Thanks to this, the owner of the site can buy fences for garden beds that are not afraid of high or low temperatures.

The artificial origin of the material is also associated with some advantages. Firstly, insects cannot damage the products because they are not attracted to them. Secondly, plastic is not subject to processes such as rotting or corrosion. Thirdly, the material does not have favorable conditions for the development of mold.

You can buy designs for plastic garden beds in any specialized store; the market offer includes several categories of products:

• plastic border tape;
• flexible fencing called garden constructor;
• “Garden board” panels made of polyvinyl chloride;
• fencing in the form of a plastic mesh.

There are many variations of plastic fencing for garden beds on sale; you can buy these types of products in any color and size. Some types of structures realistically imitate natural materials, such as wood or stone, without having their disadvantages.

Features of plastic borders for beds in the form of a tape

Plastic fencing in the form of a tape is widely used by summer residents to organize beds and flower beds on the site. Due to the flexibility of the material, the products allow you to create designs with outlines of various shapes. Border strips are available for sale, the width of which varies between 0.1-0.5 m. This height is quite enough to create raised beds on the territory.

The plastic tape protects the embankment from being washed away by water when the garden is watered or heavy rain falls. In such conditions, the root system of plants will remain in place, it is reliably protected from damage by streams.

The process of installing curb tape does not require experience or special skills. Any summer resident can cope with this task. The product comes complete with the manufacturer's instructions with a detailed description of the procedure and a set of stakes for fixing the curb. To install the tape, just dig a shallow trench around the perimeter of the future bed. Then the tape should be tightened; it is advisable that this manipulation be performed by two people.

After the tape is placed in the trench, stakes are installed on the sides to secure it in the required position. All that remains is to fill the ditch with earth and compact it thoroughly. To make the structure of the bed continuous, you should connect the edges of the tape with staples using a stapler. Such a bed can last for several years. If necessary, it can be easily removed from the ground and moved to another place.

What fences you can buy for beds in the form of ribbons: features of the range and prices

Landscape designers and owners of summer cottages prefer border strips for the reason that this type of product has increased flexibility. Using plastic borders, you can create unusual flower beds and beds of bizarre shapes; tapes are great for forming curved lines. The price of the material is low, and the extensive range opens up new design possibilities.

By purchasing ribbons of different widths, you can create multi-tiered beds or flower beds on your site, which, due to their decorativeness and compactness, are in high demand among summer residents. Products are available in various colors. A multi-tiered bed design will look more impressive if the sides of each tier have a different shade.

Average prices for curb tape:

Name of product	Manufacturer brand	Product Features	Price, rub./roll
B-15/9	Protect	corrugated, brown/khaki	234
B-20/9	corrugated, brown/khaki	299
B-30/10	smooth, brown/khaki	657
B-50/10	smooth, khaki color	1099
B-20/30	smooth, brown color	1315
B-20/30	smooth, khaki color	1440
B-30/30	smooth, brown color	1950
B-30/30	smooth, khaki color	2175
B-1000.2.11-PP	Standardpark	smooth, black	810
B-300.8,54,5-PP	carved, black	840
B-1000.2.11-PP	smooth, green color	950
B-1000.2.11-PP	smooth, brown color	950

Beds made of plastic boards: product specificity

Despite the fact that curb tape has many beneficial properties, it is not capable of becoming an alternative to rigid fencing. The design of beds made of PVC panels is capable of withstanding high soil pressure and the occasional gift of a shovel or other garden tool while cultivating the garden. This type of product is called “Garden Board”.

Externally, the products look like panels. Their length may vary, but the maximum limit for this indicator is 3 m. The width of the board is no more than 15 cm. The end parts of the boards have fasteners and grooves that significantly simplify and speed up the process of assembling the beds. Thanks to this system, structures of any size can be created.

The assembly of beds from plastic boards is carried out taking into account the manufacturer’s instructions. The set of products, in addition to the panels, includes stakes made of plastic. To construct a bed, it is enough to connect the boards together using protruding fasteners and grooved recesses. After assembly, the product is installed on the ground and fixed with plastic stakes that are driven into the ground. At the end of this process, decorative plugs are installed at the fastening points to prevent soil from getting into these holes.

At what price can you buy ready-made plastic beds for the garden and how to use them

Plastic boards are used for the construction of flower beds and garden beds. In addition, this type of product can be used for landscaping the local area, fencing a sandbox on a children's playground, an area intended for recreation, lawns and other objects. The panels are highly durable. The surface of the products is smooth.

Sets of fencing for garden beds made of plastic panels can be purchased ready-made. Manufacturers offer dozens of colors, so summer residents have the opportunity to create interesting compositions. The products are not afraid of temperature changes and prevent soil erosion. The only disadvantage of such beds is their high cost.

Average prices for beds made of plastic panels:

Garden constructor

A garden set is one of the types of fencing for garden beds made of plastic. This type of product makes it possible to show your imagination and build a beautiful decorative vegetable garden or flower bed on your summer cottage, of absolutely any size and shape. A garden set is a set of plastic parts that are connected in a certain way. As a rule, the manufacturer's instructions, which are included in each package, describe this entire process in detail.

As a result of the assembly, a solid structure is obtained in the form of a side, which is used to form a bed and fix the soil. The main advantage of the garden designer is its versatility. Unlike garden boards, the design elements allow you to create both large and small fencing on the site, depending on the needs of the owner. The finished structure perfectly retains the soil within the garden bed, as well as the moisture the plants need for development.

The garden constructor is successfully used to create multi-tiered structures. To give a bed or flower bed an unusual appearance, you can form curved lines or achieve asymmetry in shape (to do this, it is enough to move the tiers relative to each other). The installation process is extremely simple: just buy plastic beds in the required quantity, connect the parts together using fasteners and install them on the site.

Price of a garden designer for beds:

Unusual options for fencing for beds made of plastic panels

In addition to standard plastic fencing, there are many options for products with unusual designs. For example, a garden labyrinth consists of plastic elements that imitate real stones. The products are gray in color. Despite its lightness, this plastic fencing is durable and resistant to negative weather factors.

The garden labyrinth has a wide range of applications; it is used for zoning various objects on the site:

• flower beds;
• beds;
• fountains and decorative reservoirs (ponds);
• flower beds;
• paths;
• landscape design elements;
• lawns.

The labyrinth border looks discreet and does not catch the eye; it will optimally fit into the space of any summer cottage. Sections made of plastic easily go deep into the soil. Most often, a set consists of several elements. Their height is 0.08 m, and the total length of the set is 3 m.

There are other options for plastic fencing with imitation:

• bricks;
• metal fence with interesting colors;
• forged fences with openwork design;
• colored picket fence;
• wicker fence made of vines.

There are also decorative fences in the form of plastic flowers and other objects.

Features of beds made of WPC: characteristics and advantages of products

Many summer residents resort to building beds from boards made from wood-polymer composite (WPC).

Such products have several significant advantages:

A simple assembly and disassembly system that uses a special fastening system.

Durability inherent in all polymer products.

Aesthetic appearance – products made from wood-polymer composite imitate a real wooden board. The material lends itself well to the dyeing procedure, so there are many color variations on sale.

The ability to create flower beds and beds of unusual shapes.

Smooth surface of products.

The opportunity to achieve savings in the construction of beds by purchasing WPC panels instead of expensive materials, which are superior in characteristics to ordinary wooden boards.

Simple care system and practicality.

Beds made from WPC panels are characterized by high thermal conductivity and support the colors of natural wood species, as well as their natural texture. The material has few disadvantages, but they still exist. With prolonged contact with moisture, the structure tends to absorb it, which can cause mold to form.

Technical characteristics of fencing for beds made of WPC

To make WPC panels, a mixture consisting of plastic and wood flour is used, so this type of material can be called relatively natural when compared with PVC products. After mixing the components, a polymerization process occurs, as a result of which the panels acquire new properties, so designs of such beds are widely used in suburban construction.

Product specifications:

In the process of assembling the beds, two types of parts are used: the board itself and the hinge with a rotating mechanism. To fix the structure, there are special pegs that connect the elements together, and are also used to increase the height if it is necessary to increase this figure.

The mesh, as a fencing for garden beds, is not as popular as previous product options. But it also has its advantages. This type of fencing will come in handy if children are playing with a ball in the area. A soft plastic net stretched between the supports will protect the plants from damage.

Features of assembling beds from plastic panels with your own hands

To build beds from WPC panels you will need a set of boards and logs that will be used as posts. In addition, you should stock up on decorative plugs that will prevent debris and dirt from getting into the rotary hinge mechanism, as well as corners that will cover the outer corners.

Technology for making beds:

• Wood-polymer composite boards are cut into pieces of the required size. The length of the segments is selected taking into account the dimensions of the future bed.
• The height of the corner posts should be 0.2 m higher than the upper limit of the fence, the difference in the same indicator for the internal posts is 0.5 m.
• The boards are fastened together in a seamless manner. A similar result is achieved by installing one panel into another as tightly as possible. Gaps are not allowed. To save money, it is allowed to use wooden blocks or metal corners as support posts.

After assembly, the box made of WPC panels is fixed on the corner supports so that the free section of the support, exceeding the height of the fence, is located below. It will subsequently be buried in the ground. The formed frame must be carefully transferred to the place where the bed will be organized, and the structure must be aligned diagonally.

After this, the installation locations for the corner supports are determined, the box is installed in accordance with these markings, and intermediate posts are placed inside the structure. It is recommended to use self-tapping screws to secure the boards to the supports. At the end of the work, the corners are cut and fixed with self-tapping screws.

Most structures made of plastic are supplied almost ready-made. The technologies for assembling such elements are very simple and most often consist only of sequential connection of the elements available in the set. For this reason, plastic fencing for garden beds is so popular.

Beautiful, level beds, neatly fenced, not only please the eye, but also bring benefits. They can be made from whatever comes to hand. From old slate, plastic panels, curb tape, tires and so on. This article contains more than 20 ways to create beds with your own hands. Plus photos and videos with step-by-step instructions.

Luxury, or a way of growing?

Usually, beginners believe that growing lettuce and herbs can be done without beauty. Why bother with garden borders when there is a ton of daily work on the property? But inexperienced summer residents are unaware that neatly fenced beds with paths between them are not just a design element. In practice, they reduce the amount of labor required by the gardener. Judge for yourself:

• weeds will not enter the fenced bed from the side of the path or neighboring rows. This significantly reduces the work required to remove unwanted plants;
• after another rainstorm there is no need to rake up the washed-out soil;
• the higher the bed, the easier it is to weed and fertilize;
• crawling pests will not get through the fence;
• if the fence is wide and stable, you can put something on it, for example, take indoor flowers out into the fresh air. Or sit down while weeding;
• You can build a mini-greenhouse above the garden bed at any time;
• for functioning " warm beds» Fencing is required. She holds thermal energy decomposing compost, wood and paper and directs it to the roots.

There is only one drawback to arranging flower beds and beds. This needs to be done. In order to save your time and energy, we will suggest several inexpensive, practical options.

Slate border

Specialty stores are full of various kinds fences for flower beds. But savvy summer residents prefer to build beds from scrap materials. What do we have lying around on our site? Old slate? Let's put him to work!

If you have slate sheets lying around, you need to cut them to width with a grinder and dig a wavy fence around the perimeter of the flowerbed or bed.

• plus: efficiency;
• minus: slate, when interacting with water, releases substances harmful to plants. Brittle material, may crack or split.

Edge made of roofing materials

Instead of slate, metal tiles or corrugated sheets left over from roofing work are quite suitable. Pre-cut corrugated board with a grinder will not be enough to just dig in; it needs to be reinforced with wooden slats.

• plus: strength;
• minus: if the corrugated sheet is of poor quality, it will need to be repainted.

Wooden fencing

One of the most common options, such as slats, boards and beams, is found in almost every dacha. You can also use clapboard, slab, picket fence, cut or uncut board.

Tip: If you are fencing a piece of land with a board, then you need to make several supports around the perimeter and firmly bury them in the ground.

For areas registered in rustic style, hemp or wattle from willow branches are perfect. Or small logs, dug vertically into the ground.

• plus: the tree looks elegant and natural. You can show your imagination and build something special, for example, a multi-tiered flower bed;
• minus: under the influence of moisture, the wood can become covered with fungus or rot. Such borders need to be constantly looked after, treated with an antiseptic, and repainted.

Tip: To increase the service life of slats or logs, you need to dip the lower part in bitumen mastic or wrap it tightly with roofing felt.

Brick patterns

A classic of the genre - flower beds fenced with bricks on the edge. The bricks can simply be laid around the bed, half dug into the ground. Some will have two or three rows, while others will have elegant brickwork.

• plus: durability;
• minus: old brick looks unaesthetic. You may have to spend money on a new one.

Brick beds in a greenhouse

Metal border

In order to make a metal box you will need sheets, screws and corners. It is better to use galvanized steel, which will last longer.

• plus: strong, reliable fencing;
• minus: in summer, under the influence of the sun, the metal heats up and spoils root system plants. The metal is susceptible to corrosion. It needs to be repainted periodically.

Stone fences

For those who prefer environmentally friendly raw materials, fences made of stone, for example, made of cobblestones of approximately the same size, are perfect. They are used to build a fence, fastening the stones with mortar. It turns out beautiful and noble.

• plus: durability. No need to paint;
• minus: painstaking work. A heavy fence can sag under its own weight, this needs to be monitored.

Concrete fencing

Can be dug into the ground concrete blocks. If you want beds to last forever, then it makes sense to build them in the same way as the foundation of a house. Put together the formwork and fill it with concrete.

• minus: cash investment.

Concrete block beds in a greenhouse

Nets with filling (pergons)

Stones can not only be held together with mortar, but also poured in random order into specially prepared grids. Pergons are called bulk fences and can be filled with pebbles, broken glass, and colored glass. Professionals make real works of art out of this type of fencing by filling the mesh with materials different sizes and colors, laying out patterns from them. Any plant in such a noble frame will sparkle like a diamond.

• plus: no maintenance required. Durability;
• minus: cash investment.

Plastic panels - in action

Are there plastic panels left after finishing the kitchen? Dig them into the ground and you will get a wonderful fence. Plastic borders do not overheat in the sun, do not collapse or rust. In addition, they can be used to decorate beds of unusual shapes, round, wavy or triangular.

• plus: you can rearrange it as soon as you decide to change the design of the site. Easy installation. It is enough to dig a little and secure with pegs;
• minus: the plastic panels are thin and fragile, it is better to remove them for the winter.

Beds made of plastic panels for a greenhouse

Border tape and other plastic products

Border tape is a fence in the form of a green or Brown with a wavy or smooth surface. Can be purchased at any flower shop. Tape, like other types of decorative plastic fencing, has a number of advantages.

1. Does not rot, does not become moldy, does not rust.
2. Sold at an affordable price.
3. Easy to install.
4. Elastic and comfortable. Can be cut and given any shape.
5. Resistant to ultraviolet radiation and low winter temperatures.

Another interesting option– installation of purchased decorative fences. They are absolutely different shapes and flowers. For example, in the form of tulips with green grass or imitating a picket fence. It has the same advantages, but it is better to remove it for the winter.

In addition, the “Labyrinth” border is popular - a narrow plastic fence stylized as a stone. And the plastic panel “Garden Board” up to 3 meters long and up to 15 cm high, durable and easy to install.

Tires - there is no limit to imagination

Tires are most often used to frame flower beds. From them you can create any multi-tiered structure and even a flower bed in the form of a tea cup and teapot. If you cut the tires in half and dig them into the ground, you will get a wavy fence that children love to jump on.

• plus: Easy installation. Space for creativity. The highlight of the site.

Bottle sides

One of original options. To construct such a fence, you need to collect about a hundred one and a half liter bottles of the same shape. Wash them, dry them, fill them with sand or earth. Install by digging alternately throughout the entire bed. If you also paint the bottles water-based paint, then you will get nice, elegant flower beds. The same can be done from glass bottles.

• plus: efficiency;
• minus: glass breaks easily.

To collect so much plastic bottles, you still need to work hard!

Beds made from plastic bottles