Blinds have recently gained extraordinary popularity not only in offices; they are also happily placed in residential premises. Attaching blinds to windows provides excellent protection from direct sunlight without interfering with ventilation or opening the windows.

Manufacturers offer several types of blinds

• Vertical;
• Horizontal;
• Accordion or pleated;
• Roll type of folding.

Vertical blinds have the form of vertical slats (strips) connected to each other, which move around their axis using a plastic chain. And also, they can be moved left or right.

The operating principle of horizontal blinds is the same as vertical ones. Only folding occurs from bottom to top.

Pleated - they look like an accordion, for this they are impregnated with special means so that they keep their corrugated shape. They can be attached to both a plastic window and a window opening.

Roller blinds - have the appearance of a continuous canvas that can be rolled into a roll, while opening or closing part or all of the window.

Depending on their materials, lamellas can be:

• metal;
• wooden;
• bamboo;
• plastic;
• made from fabric.

What kind of blinds are the best option for the balcony?

Before you begin placing the blinds on plastic windows, you should understand whether they are needed at all. Will they become a hindrance when closing or opening the window?

One thing can be said for sure - if a loggia or balcony is converted into a separate room, then blinds are definitely needed.

When choosing blinds, in addition to design and appearance, special attention should be paid to the following points:

• functionality and practicality of fasteners;
• It should be taken into account that not all types of fastenings are suitable for window units;
• practicality of blinds;
• It is better to choose plastic or fabric material for the balcony; wood and bamboo can create unnecessary noise.

What are the best blinds for a balcony?

For balconies and loggias, best suited - plastic blinds, because:

• they are easy to clean and wash;
• do not lose their appearance over time;
• resistant to sunlight.

Before taking measurements, you need to decide where you want to install the blinds:

• on the window sash itself;
• on part of the wall above the window;
• into the window opening.

How to take correct measurements?

If you decide to install blinds yourself, then you need to know a few important points. Windows do not always have a completely even shape, therefore, for measurements it is better to use a steel tape measure and measure everything down to the millimeter, in different places of the opening.

For a certain type of fastening, there are some nuances in measurements:

1. If you are planning to install blinds on the wall, above the window opening, you should understand that the cornice will take approximately 5 cm. The length of the blinds is up to you to determine: either they will completely cover the window opening, or only to the lower edge of the window. According to the width of the blinds, you should set: 10 cm more than the opening;
2. When installing blinds on a window sash, you need to measure the distance between two vertical glazing beads (this will be the fastening). You also choose the length yourself, and the width should be 3 cm larger than the glass to avoid unnecessary clearance;
3. Placing blinds in the window opening is considered the most difficult procedure. The parameters are measured: according to the width and height of the window, while the height is calculated as the length of the glass with the addition of 1 cm to cover the rubber seals. It is important to consider that when folded, the blinds do not interfere with opening the window.

Basic window mounting options

There are two main methods for installing blinds on plastic windows, with and without a drill. The slats of the blinds are located on the cornice, and how this cornice will be held on the window, at the top of the wall or in window opening, depends on the installation method.

Drilling installation method

Blinds for plastic window sashes are attached separately for each one.

The cornice is applied to the upper edge of the sash and the places for its attachment are indicated. For greater accuracy, at the places of fastening with screws, it is better to drill neat holes in advance. We attach the bracket, screw in the screws and fasten the cornice.

Afterwards you need to fix the fishing line that holds the slats. We make small holes directly opposite the line exit under the glazing beads at the bottom of the sash. We thread the fishing line through the plugs, and fix the plugs themselves into the holes.

The drilling method is used by placing cornices on the ceiling or wall on top of the window. To do this, make appropriate holes into which dowels are driven and brackets are secured with screws.

How to install blinds on plastic windows horizontal video:

Fastening method without drilling

Holes in window sashes and walls can cause a lot of inconvenience when you decide to remove your blinds. Therefore, you can use analog types of mounting brackets on windows:

• Using double-sided tape.
• For the top of the opening sash, when the bottom is fixed with small magnets;

This method is very easy to use, and it does not damage the window frame or walls. With this fastening, removing the blinds to clean them from dust will not be difficult.

Unlike window frames, blinds have a strict geometric shape, the slightest curvature of the fastening will immediately be reflected on appearance.

How to attach blinds to plastic windows without drilling video:

Nuances when attaching different types of blinds:

• Vertical blinds

The peculiarity of mounting vertical light filters is that they are suitable for mounting on a window opening, wall or ceiling. They are not suitable for mounting on sashes and are attached only by drilling.

• Horizontal blinds

The most standard blinds that are suitable for almost any plastic windows. They are considered universal; it is possible to mount them both on each sash and between frames.

• Roller blinds

For ease of use, it is better to install roll filters on window sashes. If they are placed in a window opening or attached to a wall, then it will not be possible to close or open the window with the filters closed. Besides roller blinds- very delicate, special care must be taken during installation.

Video on installing roller blinds:

How to remove blinds correctly

Over time, like everything else in the house, window structures become covered with dust, so blinds should be removed for cleaning. Each type has its own characteristics when removing.

Removing vertical blinds:

• We transfer the slats to the open state, after which we assemble them;
• We release the chain from the weights and take out the weights;
• We remove each lamella: lift the slider clip and, moving it a little, remove the lamellas one by one.

Removing horizontal blinds:

• Remove the cornice from the bracket;
• We assemble the lamellas at the top and look for the latch protrusion;
• Pull the lock towards you and to the right;
• We remove the slats.

Removing roller blinds:

• There is a tongue on the bracket; you need to bend it using a screwdriver;
• Remove the shaft by pulling it towards you.

A short video on how to install blinds on plastic windows:

Most windows in modern buildings- These are plastic structures. PVC windows look stylish, they are practical and uncomplicated. Blinds will help complement the laconic composition of the window opening. Let's find out how to install blinds on plastic windows.

Video instructions for installation with drilling

Video instructions for installation without drilling

Most reliable way is a study of thematic videos and photos. Visual training materials will help you attach blinds to plastic windows easily and efficiently. Remember that installed blinds should not interfere with the normal use of the elements window design. We present to your attention a video where you will see how to independently attach blinds to PVC windows in various ways. Installing blinds yourself will help you save your budget and develop new useful skills.

2 ways to attach blinds to plastic windows:

1. With drilling. The blinds are attached to the window using brackets. Installation brackets are included when purchasing blinds - two or three depending on the width of the product. We make markings - fixing the blinds should be carried out strictly horizontally, and if you are not confident in the installers of your windows, you should use a level. The brackets are secured to the top of the sash with self-tapping screws; you can use a screwdriver or an ordinary screwdriver. A box with a blind mechanism is installed on the brackets. When fastened with self-tapping screws, the blinds will last quite a long time, but if you decide to remove them, you will be faced with unaesthetic holes in the plastic frame.







2. No drilling. There are 2 types of fastening without damaging the frame. The first is that an L-shaped bracket is attached to the opening flaps, to which the blinds mechanism is attached. The second is that the blinds are attached to the blind sashes with special double-sided tape on a foam base.



Fastening with L-shaped hooks



Fastening with double-sided tape

In my opinion, fastening with L-shaped hooks is the best - the blinds are held very securely and there is no damage to the frame. Fastening with double-sided tape is also not bad, don’t be afraid, the blinds will not fall in 1-2 months, but will hang for a year, but still this type of fastening is not as reliable as L-shaped hooks.

Are you choosing? Find out what types there are, installation methods and how to care for them.

3 types of installation of blinds on PVC windows:

1. Above the window opening. The structural elements of the blinds are fixed to a section of the wall. First, markings are made, then recesses are drilled with a hammer drill in the places where the brackets are attached and dowels are installed. The brackets are screwed to the wall, and then the entire structure of the blinds is fixed to the installed brackets. If you choose this type of installation, be prepared for the size of the blinds to be slightly larger than the window opening.







2. In the window opening. The structure is fixed on the upper slope of the window. By installing blinds in the opening, you completely block it. This type of installation is used when designing blind, non-opening sashes. Order blinds a couple of centimeters smaller than the opening size.





3. On the window sash. This is how horizontal blinds are installed on plastic windows. The size of the structure is selected according to the size of the double-glazed window; make sure that the blinds do not interfere with the free use of the sashes, handles, and window sills.

Residential buildings and restaurants. The products are designed to preserve the intimacy of the environment and protect from sunlight. In order for them to look harmonious in the window opening, they must be installed correctly. You can watch how various blinds are attached to plastic windows in the corresponding video or read the instructions. Depending on the shape of the product, the types of fasteners will differ. Next, we will talk about the main installation methods.

Blind installation options

The installation method is influenced various factors, however main role The presence of a flat surface plays a role. If the walls are curved, they must be leveled to avoid complications during installation. The following options exist:

• Ceiling mount;
• Installation on walls;
• Placement inside a window opening;
• Installation of blinds to each double-glazed window.

When choosing a method, you should focus on the design. The sequence of the work itself will differ little.

There are several options for attaching blinds to a window opening, both with and without drilling

Installation stages

The versatility of blinds implies a similar procedure for in various ways fastenings The differences will only be in the details.

1. First of all, it is necessary to measure the window opening. If the owner decides to secure the products in a third way (in the window opening), then a couple of cm will need to be subtracted from the received data. This will avoid the awkward situation when the blinds drag along the window sill. If the user decides to install it with an overlap, then, on the contrary, an extra cm will be required. To reliably close the window, 4-5 cm on the wide side will be enough. The length can even be up to the floor. Here you need to focus on your own sense of taste. If the owner chooses the 4th installation method, then measurements of each sash will be required. In case of detected curvature, it is recommended to adjust the measurements as for the correct figure.
2. Marking. This refers to the marking of fasteners, which must be located symmetrically and accurately. Geometry is important, since the reliability of the blind design itself will depend on it. Already during marking, it is necessary to check the possibility of opening and closing the window. The product should not interfere with the owner’s ability to ventilate the room. It is also important to decide on the location for the cord, since that is where the point will be highest pressure. In particular, it is recommended to provide additional fastening.
3. Installation. Self-tapping screws are installed directly into walls or ceilings. After they are screwed, a curtain rod is hung on them to secure the blinds. Then you can test the product itself.

Blinds diagram

Nuances of installation depending on the type of plastic products

In order not to damage plastic windows when installing blinds, it is necessary to carry out the work extremely carefully. Let's consider the intricacies of installation for different types products:

• Vertical blinds. This type is in greatest demand because it allows the designer to experiment with color and shape. The range of blinds is extremely wide. For installation, not much is required: a cornice, blind slats, a chain with runners. The latter must be of sufficient length so as not to limit the operation of the device itself. This is especially true if the window has a non-standard shape.

The products can be mounted on a ceiling or wall mount. In the first case, you should focus on the width of the lamella in order to determine the area where the cornice will be placed, that is, the distance from the wall. Mounting to the wall implies the possibility of placing the cornice both under the ceiling and above the window itself. After installing the brackets, runners for hanging slats are installed on the mounted cornice.

Various options for installing blinds on a window

Since vertical products do not function without weights, they will need to be hung on both sides of the blind somewhere below.

• Horizontal blinds. Often these products are installed in the second or fourth way. Installation on the wall is required when the owner wants to completely close the window opening. And installation on each sash allows you to maintain functionality plastic double glazing. Installation work imply going through the same stages as in the case of vertical products.

Installation of blinds with and without drilling

There are two main options for attaching the cornice. The first method involves the use of self-tapping screws, and the second - L-shaped fasteners.

Self-tapping screws allow the owner to install horizontal products directly onto the window profile.

Attention! The latter will not experience significant damage, since the holes can always be sealed with white sealant.

Before drilling, markings are made. To do this, install the blinds in the cornice and open them completely, after which they bring them to the window. A visual assessment should make it clear how accurately all measurements were taken, since then it will be necessary to transfer the markings of the brackets to the profile. There should be no distortions.

Properly attached blinds will decorate the room and serve the owner for a long time

After the drilling operation, the following actions are performed:

1. The cornice is screwed using brackets;
2. The fastenings are closed;
3. A hook with a cane and a tip is installed in the control unit;
4. The bell is secured with a knot;
5. Then, using a cord, the product is lowered to the end to fix the blinds at the bottom.

L-shaped brackets are attached without drilling, which will need to be purchased separately. The simple snap-on method greatly simplifies the maintenance of windows and blinds. These brackets cling to the top of each sash, unless it is blind. This type fastening is considered the most suitable for installing the product inside a window opening. The use of the same adhesive tape does not guarantee the same degree of reliability that special brackets can provide. At the same time, they maintain integrity window profile, what is not less important.

Following these recommendations, the user can install blinds on plastic windows independently. Depending on the shape of the product and the features of the window, you will need to choose the best way fastenings He considers the method without drilling to be the best.

Video: How to attach blinds to plastic windows

Photo: How to attach blinds to plastic windows

Hide

In order for horizontal blinds to serve for a long time, you need to know how to hang horizontal blinds with your own hands correctly.

And also in our article we will look at how to wash horizontal blinds and repair them yourself.

Installing horizontal blinds - step-by-step instructions

How to attach horizontal blinds? Experts name 3 methods:

Mounting methods

1) To the ceiling.

2) To Wall.

3) In the window opening.

Before directly installing horizontal blinds, you must do the following:

Brackets

1. Determine the dimensions of horizontal blinds (width and height) based on the characteristics of the window opening.

If you want to install horizontal blinds directly into the window opening, then it is advisable to subtract 1-2 cm from the planned width of the structure (correcting uneven slopes).

2. Determine the best location of the control parts - on the left or on the right.

3. In addition, you need to decide on the type of fastening:

Set of tools

Either using standard twist brackets, or it will be installed on tilt-and-turn sashes with drilling, or attached to tilt-and-turn sashes without drilling.

4. Determine the length of the control mechanism. The standard length is 2/3 of the height of the blinds.

Please note that it is possible minimum width blinds - 22 cm, and maximum - 220 cm with a guarantee of trouble-free operation. Of course, you can use 300 cm, but without a guarantee. And the height is 250 cm (maximum), if with a guarantee; and without it - 300 cm.

Horizontal blinds - how to install step by step

Now let's look at how to attach horizontal blinds with your own hands in all three ways:

But first, prepare the necessary tools:

• Roulette,
• Pencil,
• Hacksaw for metal,
• Building level,
• Drill,
• Scissors,
• Fastening elements.

Mounting on twist brackets

Attaching brackets to a window opening

1) Based on the dimensions of your blinds, mark the mounting points for the brackets. Please note that the distance between them must be at least 60 cm. And the brackets must not get into the rope clamp and control mechanism.

2) Attach the twist brackets to the window frame, wall or ceiling.

3) Turn the latches of these brackets counterclockwise until they stop.

Attaching brackets to the wall

4) Insert the top curtain rod into the brackets while turning the latches clockwise until they stop.

Horizontal blinds: mounting on inclined windows with drilling

Installation of twist brackets

1) Install twist brackets on the upper part of the window sash, and corners, i.e., lower plastic brackets, on the lower part.

2) Secure the cables in special bushings.

3) Install these bushings through the springs into the holes along the edges of the upper cornice.

4) Secure the curtain rod to the brackets.

5) Thread the cable through the holes along the edges of the slats.

6) Insert the second set of bushings into the holes of the lower twist brackets, threading the cable through them, which is then secured with a screw.

7) Attach the handle hook to the control mechanism.

8) Install the handle holder (on the plate) on the sash.

9) Check the functionality of finished horizontal blinds.

Horizontal blinds - instructions for installation on inclined windows without drilling

Installing horizontal blinds without drilling involves the use of drop-down brackets.

1) Mark the mounting locations for the brackets.

2) Using screws, secure the twist brackets, which should be included with the slip-on top fasteners.

3) Install the “products” on the top of the window sash, securing them with a special key.

4) Set to basement part window sash bottom brackets.

5) Secure the cables to the bushings.

6) Install the bushings through the springs into the holes along the edges of the upper cornice.

7) Secure the curtain rod to the brackets and thread the cable.

8) Install plastic bushings into the holes of the lower brackets

Installation of cornice

9) Using screws, secure the cable in the bushings.

10) Attach the pen holder.

11) Check how all the elements of the resulting structure work.

Conclusion: it is not difficult to install horizontal blinds, the instructions are quite simple!

How to remove horizontal blinds?

Removing blinds

Before washing horizontal blinds (you can watch the video here:) they must be removed. We'll tell you how to do it right. Let us immediately note that dismantling horizontal blinds is much more difficult than vertical ones, since the latter have a fairly simple structure. You can read more about this in the article on our website.

First, let's look at how to remove horizontal blinds from a window without brackets:

1. Unfasten the curtain rods from the brackets that secure the blinds.

2. Remove the decorative cover, if there is one at the mounting location.

3. Lift the slats and, while holding them, locate the tabs of the tabs on the top edge.

4. Pull the latches towards you first and then to the right.

5. Pull the curtains down and forward.

6. Remove the product from the window and close it.

In addition to the method described above, you can also remove horizontal blinds along with their brackets:

Usually, for the installation of horizontal blinds and their entire structure, a standard metal corner and hexagonal screws are used, which only need to be unscrewed.

Remove the shutters.

If you have a roof window or a window structure with plastic profile, then horizontal blinds are often installed with removable clamps using a clamping key turned clockwise.

Locate this key on the clamps and carefully turn it in the opposite direction.

If you still have questions - how to remove horizontal blinds, video instructions can be viewed here:

How to wash horizontal blinds - detailed instructions

Once you have removed the blinds, let's start cleaning them. However, we note that there are different variants care for horizontal blinds, depending on their material.

How to wash horizontal aluminum blinds?

These blinds are easier to clean if they are not removed from the window structure. So let's get started:

• Vacuum your blinds to remove accumulated dust.
• Close the blinds tightly to avoid splashing the window.
• Prepare a soap solution and add a little detergent to it.
• Apply this solution using a sponge to each plank.
• Leave for a couple of minutes so that any dirty or greasy residue disappears.
• Wash each plank thoroughly, fixing it on the reverse side. Otherwise, a break will appear on it.
• Rinse the blinds in warm, clean water.
• Wipe the washed blinds dry.

The method of cleaning metal horizontal blinds can be quite simple. If possible, remove them from the structure. Then:

• Prepare a solution in the bathroom from detergent for dishes and place your blinds in it for 1-2 hours.
• Wash each plank with a soft sponge. So, you will get rid of plaque.
• Rinse the blinds and leave them to dry. Or wipe them dry and reattach them.

How to wash horizontal plastic blinds?

Caring for plastic horizontal blinds

Not necessary for plastic horizontal blinds special care. They tolerate cleaning well and can be washed easily, even with a weak soap solution.

• Close the blinds and vacuum.
• Wipe with a damp sponge or rag soaked in soapy water.

If your blinds are very dirty, they should be removed from the window. And then they are washed in the bathroom, just as in the case of aluminum horizontal products.

How to wash horizontal wooden blinds?

Cleaning wooden horizontal blinds with a vacuum cleaner

Wooden blinds are the most expensive and require careful care. Be aware that it is strictly forbidden to use water, as under its influence the wooden planks can change color and become deformed. If you want to maintain the original appearance of your blinds, then:

Wipe them with a clean and dry cloth or simply vacuum them.

However, we note that sometimes it is permissible to use special means for cleaning unvarnished wooden surfaces.

Repair of horizontal blinds

At the moment, the market is saturated with many components for different types of blinds. Therefore, you can repair horizontal blinds with your own hands. You just need to identify the faulty part, find it and simply replace it with a new one.

However, when disassembling the blinds, be sure to remember the location of all parts and the order of disassembly. Otherwise, you will make a lot of mistakes during reassembly. It is best to photograph the entire disassembly process.

Installation of horizontal blinds

For repair you will need:

Screwdriver,

Pliers,

Wire. Bend it in half so that there is an eye like a needle.

This is necessary to thread the cord.

Now let’s look at the main damage to horizontal blinds and instructions for eliminating them:

1. The blade made of slats stopped working - the rotating mechanism was damaged. To repair it, do the following:

1) Remove the side caps from the top cornice.

2) Use pliers to remove the axle from rotary mechanism.

3) Remove the mechanism. To do this: release the sides of the cornice.

4) Take the new mechanism and assemble the structure in reverse order.

2. The slats are damaged:

1) Remove the blinds.

2) Squeeze the cord plugs out of the bottom lamella, cut off the end knots and pull out the cord.

Horizontal blinds in the hall

3) Remove the damaged strips and replace them with new ones.

4) Thread the cord through the holes of the strips and plugs.

5) Tie knots and insert plugs into the bottom lamella.

3. The ladder broke:

1) Remove the blinds and side caps from the top cornice.

Kitchen with horizontal blinds

2) Remove the upper ends of the ladder from the caliper, which is located on the axis of the rotating mechanism.

3) Disconnect the canvas from the curtain rod and remove the cord.

4) Pull the ladder out to the side, while holding the planks in your hand. Otherwise, the whole canvas will crumble.

5) Install the clamps on the new ladder in the same way as they were installed on the old one.

In addition to washing the blinds, you should also wash the windows from time to time. About how best to do this,

The fashion for bulky curtains that collect significant amounts of dust in record time has already passed, so most people prefer to use light, airy fabrics to decorate the window area. To protect the window of a room from strong sunlight and curious passers-by or neighbors, horizontal blinds are increasingly being used.

Horizontal blinds are easy to use, which is why they are so popular.

It’s not difficult to figure out how to install horizontal blinds, but there are a lot of subtleties in this matter that need to be taken into account so that in the future the mechanism works correctly and fulfills its function. Blinds can be made of wood, plastic and aluminum, with the latter being the most common as they are extremely easy to use and can be installed on all types of window frames.

What you need to install blinds effectively

The blinds are sold ready to install and with a full set of fasteners, so you can install them yourself. When purchasing these interior elements, you can order the desired size to fit the window. In addition, you need to pay attention to the type of fastening of the blinds, since in some cases, in order to secure the blinds mechanism, it is necessary to drill the surfaces of the window, while in other cases you can do without this. The most common option are blinds that have standard twist brackets, which are fastened with self-tapping screws, since this type of fastening can be done quite quickly.

Despite the fact that many, after reading the installation instructions, may think that installing blinds is not difficult, in fact you need not only to have the full range of necessary tools, but also certain skills, without which installing blinds on windows can take a long time.

Before installing horizontal blinds, you should take them out of the box and check whether all fasteners are available, and also prepare all the tools that may be useful during the work process. TO necessary tools relate:

• crosshead screwdriver;
• roulette;
• spirit level;
• hammer;
• marker;
• cutter;
• pliers.

Then you need to think about how to install blinds on the window.

Return to contents

Preparatory stage for installing horizontal blinds

During the preparatory work It is very important to carry out the marking correctly. First of all, it is necessary to ensure that the structure, after attaching it to window frame did not cover the window handle and did not interfere with its opening and closing. Next, you need to use a level and tape measure to determine the optimal location for attaching the brackets.

When selecting the optimal location for attaching the brackets, it is very important that one of the upper brackets is located in close proximity to the mechanism that controls the opening and closing of horizontal blinds, since during use this place is subject to significant force, and if handled carelessly, the fastening can be torn off.

After determining the optimal mounting locations, you need to record the measurements using a marker. Often, the set of brackets for horizontal blinds does not include screws the right size. It is best to use self-tapping screws for fastening the brackets, the size of which does not exceed 10 mm, since very long screws can lead to a violation of the window seal. If the seal is broken, water vapor will accumulate in the middle of the plastic window and undergo a condensation process, which will ultimately lead to the accumulation large quantity liquid inside the window and failure of the mechanism that opens the window.