The screen under the bathtub gives the bathroom a finished, well-groomed look; it’s not very pleasant to admire the pipes, legs of the bathtub, and a place to store small items for cleaning and detergents, there is no such thing as too much in an apartment. Of course, you can buy a bath screen ready-made, the inconvenience is that they are made according to standard sizes and not all bathtubs are suitable, you can invite a specialist, which will cost a lot of money. A DIY bath screen will cost much less, will fully meet all the functional and decorative requirements of the household and will undoubtedly become a source of pride for the owner.
Screen design
The design of the screen is very simple, frame and panel. The frame is 2 guides and a frame. If desired, storage shelves are installed.
Types of screens
Bath screens can be solid, hinged or sliding.
Materials
Materials must meet the following requirements: durability, withstand high humidity, not be subject to deformation, and do not require special care.
For the frame, you can use wood that has been pre-treated with an antiseptic to prevent the appearance of mold, mildew and varnish to avoid rotting and splitting of the wood due to high humidity. Metal profiles are also used, which are treated with anti-corrosion agents; aluminum is most often used.
You can make a bathtub screen with your own hands using a variety of materials:
- moisture-resistant drywall, which after installation is finished with other types of materials (tiles, plastic, washable wallpaper, etc.);
- MDF, OSB;
- Chipboard, it can be covered with self-adhesive film. Chipboard is a heavy material, more suitable for swing doors;
- polyvinyl chloride (PVC);
- plexiglass;
- brick, stone;
- specially treated wood;
- moisture-resistant mirror;
- plexiglass;
- polyester fabric, polyester, waterproof nylon fabric. The faux leather trim on the panels will look original;
- oilcloth and other materials.
Screen for bathtub MDF Coupe 1.7m
How to make a screen from plasterboard, MDF, OSB
Working with drywall is easy and its cost is low. First, the frame is installed, optimally from metal profile, it is possible from wooden beam size 0.4 x 0.4 cm. The timber is pre-treated with an antiseptic; it is advisable to coat it with moisture-resistant varnish, so the frame will last a longer time. The frame should be slightly deeper towards the bathtub, because after installing the drywall, finishing material will be laid on it. When installing the frame, you must use a building level and a plumb line. Moisture-resistant drywall is green in color.
Screen mounting:
- a sheet of drywall is marked;
- cut the blanks with a construction knife;
- outline and cut out the technical window. Screw the hinges and hang the door;
- the panels are connected at an angle of 90 degrees using self-tapping screws;
- attach the plates to the frame with self-tapping screws 10-15 cm apart;
- You need to leave a gap of about one centimeter from the floor and the edge of the bathtub, since if moisture gets on the drywall, it can expand a little and swell.
- plasterboard is primed, the selected finishing material is laid on top of the primer - ceramic tiles, cladding made of plastic panels and etc.
Covering the frame with MDF or OSB boards is almost identical to installing a plasterboard screen, there is one caveat - before installation, the boards are treated with a special moisture-repellent compound and thoroughly primed on both sides.
How to make a screen from PVC panels
Making a bath screen with your own hands from PVC panels is not as difficult as it seems. When cutting panels, you should work with a sharp knife, very carefully, since the plastic material is very fragile.
The frame will require 2 metal or plastic guide profiles, square pipes with a diameter of 0.1 x 0.1 cm, and self-tapping screws. The frame is mounted using self-tapping screws and corners. The bottom rail is glued to the floor with liquid nails or sealant. The panels are inserted into the grooves of the side rails so that they cover a little more than half of the screen. Handles are screwed to the panels.
How to make a screen from plastic lining
Screen from plastic lining It looks very decorative and can be easily disassembled if necessary. In addition to the upper and lower guides, a profile is installed in the frame in the middle for greater reliability. The lower profile is glued to the floor. Panels are cut to the appropriate size. If the screen is blank, then you need to cut a viewing window and insert a plastic door. It is more difficult to make a sliding one than a “blind” one; the principle is the same as for PVC panels. The joints must be treated with silicone sealant and applied plastic corners must be glued.
For corner bath
Scheme of a curved screen for a bathtub.
This is where a lot of patience and skill is required. A curved screen is better and easier to make from plastic; it bends easily and is moisture resistant. To install the frame, you need to attach guides to the floor, repeating the shape of the bathtub. Wooden blocks are attached to the top guide with “liquid nails” to secure the top guide. The panel is cut out and inserted into the guides. Disguise the lower joint using a plinth of the same color. A corner bathtub with a brick screen decorated with mosaic tiles looks impressive.
Options for original screen covering
- the bathtub can be decorated with a curtain made of quick-drying nylon or polyester fabrics; such curtains provide easy access to plumbing communications, allow you to ventilate the space under the bathtub, and, moreover, fix it easily and quickly;
- The screen made of specially treated wood looks cozy. The screen can be made under the blinds, with openings that will help dry the wood and ventilate it;
- Covering it with moisture-resistant mirrors will visually expand the space and make the room feel airier;
- can be sheathed with ordinary oilcloth, which is used in the kitchen. The option is not durable, but not expensive, easily replaceable and original;
- you will be pleasantly surprised by the cladding made of artificial leather. It looks very decorative, and if the trim is decorated with artificial leather applications of other colors, the bathtub will take on an exclusive look.
A self-assembled screen will cost less than a ready-made one. The best option– plastic sliding. Plastic is not afraid of moisture, it is easy to care for, sliding panels provide access to technical components; the free space under the bathroom can be equipped with shelves and the necessary small items can be stored there. Plastic is easy to install and dismantle.
03.10.2016 / fromInstalling a screen under the bathtub is a great way to add completeness to the room and hide plumbing communications. And to save money and fit the screen perfectly into the interior of the bathroom, make it yourself!
How to make a bathtub screen with your own hands?
Even in the most stylish and neat bathroom, a bathtub installed without a screen does not look very elegant. It’s worth thinking about how to decorate the space underneath while maintaining functionality and without blocking access to plumbing communications.
The most universal solution may be to build a screen under the bathtub. And if you want to get a unique interior detail, discard the finished screen and make it yourself.
Selecting material for constructing the screen
The most popular and easily manufactured screens are plastic. They are durable and not afraid of dampness. You can make a screen from multi-colored plastic to match the interior or cover it with a special film.
When creating a screen for a bathtub, it is important to carefully calculate and think through everything. Therefore, the first thing you need to do is choose.
The second stage will be to become familiar with the cost of laying tiles in the bathroom. This is necessary in order to decide whether it is worth starting work on your own. .
The second most popular is a screen made of MDF panels.
In this case, it is necessary to take into account that MDF is afraid of dampness, and therefore before installation it is necessary to treat the panel with a special compound.
Plasterboard screens are usually installed by those who do not intend to use the space under the bathroom for storage.
Such a screen must be equipped with a door to gain access to plumbing equipment if necessary.
Support frame
Almost every screen requires the construction of a frame on which the panels will be attached. It can be made from wooden or aluminum profiles with various parameters-25x25, 30x30, 40x40.
Before starting work, be sure to make markings on the walls and floor to accurately mark the lines along which the screen will be installed. To strengthen the frame, it is necessary to install transverse profiles.
They will add rigidity to the entire structure. After this, the profiles are joined together and attached to the walls and floor of the bathroom.
Laying a brick screen
One of the very stylish and original options- brick screen followed by finishing with tiles or decorative plaster. It's pretty easy to make yourself.
Before starting work, you will also need to mark the future wall of the screen so that its edge is flush with the edge of the bathtub.
On the opposite wall of the bathroom you also need to make vertical markings, which will serve as a guide when laying the brick. It is recommended to lay 1/2 or 1/4 bricks using cement-sand mortar.
You can make a screen with a niche for feet. A door must be provided for access to the drain and plumbing communications!
You can buy it in a store or make it yourself from a plastic panel or other available materials.
Popular types of screens
From plastic lining
This is the cheapest and easiest screen to manufacture and install. Plastic does not require additional finishing, so you can immediately use the bathroom, and if necessary, this design can be easily disassembled, providing access to the internal space.
Before starting installation, you need to stock up on everything you need: in addition to the panels, you will also need a starting profile, strengthened around the perimeter of the screen.
To prevent the plastic from bending and losing its shape over time, you need to additionally strengthen the frame with a profile in the middle of the structure.
The lower part of the profile is glued to the floor with sealant.
Strips of lining are cut using a construction knife and inserted into the starting profile. Where the door is planned, you need to cut a hole in advance.
Video: Decorative screen
Sheathing with plasterboard
Installation requires special plasterboard for rooms with high humidity yu to prevent it from getting wet and rotting.
The good thing about the plasterboard option is that it can be designed in the form of a niche with shelves, so that in a small room like a typical bathroom it can successfully replace a cabinet or chest of drawers.
It consists of sheets of plasterboard mounted on a frame made of metal profiles or wooden blocks. You can install the frame on one side of the bathtub or on both sides at once - it all depends on how the bathtub itself is located.
By the way, the amount of necessary materials depends on this.
To make a screen you will need: drywall, putty, profile for drywall, sealants and impregnations, paint.
The work begins with marking the future frame. After this, a frame is assembled from a profile depending on the shape of the screen and installed under the bathtub using a drill and screwdriver.
First, the smaller part of the structure is attached, then the larger one, and they are fastened together.
A technological hole must be provided. After fixing the sheets, the surface is treated with sealant, puttied and coated with primer.
After all layers have dried, you can begin finishing work.
From ceramic tiles
Ceramic tile finishing is possible for screens made of plasterboard, MDF or brickwork. Putty is applied to the carefully primed surface, after drying it is thoroughly rubbed with sandpaper and primed again.
The tiles are laid in the same way as usual, using special glue and crosses for seams and grout. The advantages of such a screen are its decorativeness and durability.
You can choose something completely unique color combination and decorate your bathroom in any style. You can even make sliding doors, but it will be somewhat more complicated and costly.
MDF sheathing
MDF boards are afraid of moisture, so it is necessary to impregnate them with special sealants before installation. After this, they are coated with a primer and attached to the frame in the same way as sheets of drywall.
To further protect the screen from exposure to dampness, you need to make special ventilation holes in the side opposite the process door.
Usually, for this purpose, a small slot is made, 5-10 cm long and 2-3 cm wide. So that it does not catch the eye and does not disturb general view, it can be covered with a decorative plastic grille. The finishing of the MDF screen can be made of tiles or plastic.
For acrylic bathtub
An acrylic bathtub is more fragile than a cast iron bathtub and requires special care when installing the screen. The structure itself is usually made of PVC panels in the usual way, the same as for a cast iron bathtub.
Before starting installation, you need to apply markings to the side of the bathtub, marking the places where the screen will be fixed.
After this, the top part is aligned with the side of the bathtub and the same marks are applied to it, making sure that they coincide with the marks on the side.
The screen is attached to the bathtub using mounting pins and self-tapping screws.
To make the screw entry points invisible, it is recommended to cover them with special plugs that match the color of the bathtub. It is also possible to build a screen from brick, but in this case you need to first build it and then install a bath on it.
Before you start building a screen structure for a bathtub, it is important to purchase a bathtub and, of course, a toilet. Great option for a combined bathroom - .
If you have a small bathroom at your disposal, don’t be upset, we will help you choose the design of a small bathroom in Khrushchev, you can find out more about it.
PVC panel screen
To manufacture it, you will need standard plastic panels, guide profiles - aluminum or plastic, a square pipe with a cross-section of 10x10 mm and self-tapping screws.
The first stage of the work will be the manufacture of a frame from two parallel tubes connected transversely by the same pipe. Vertical racks are positioned depending on the size of the screen.
After painting, guides are installed on the pipes, one of them is attached to the lower frame, the other to the upper. Panels must be carefully cut into pieces required size and insert into the grooves of the guides.
Screen shape
The screen under the bathtub, due to the characteristics of the room and the shape of the bathtub itself, most often happens rectangular shape. The only exceptions are screens for corner bathtubs; a curved design is provided here.
Depending on the material of manufacture, it may have some features and improvements.
For example, brick or plasterboard may have special niches for the feet so that they do not rest against a blank wall.
The shape of such a niche can be straight or inclined. Depending on the opening method, screens can be sliding or hinged.
The second option is preferable, as it does not require additional space for the door.
Video: Manufacturing technology
Sliding screen
A sliding screen is best made from PVC panels or plastic lining. These are the easiest materials to work with, and the screen they make is very durable.
For installation you will need a special aluminum profile, door guides are made from it.
First of all, a frame is mounted, on which guides are installed, equal in length to the bathtub itself or the distance between the walls of the room.
The doors are fixed in the frame, and they need to be placed on the sides of the screen itself in the first profile groove. The central part is most often made motionless and located in the middle groove.
The screen is attached to the bathtub already assembled using spacer bolts. Furniture handles are installed on moving doors.
For corner bath
When creating a screen under corner bath It should be taken into account that traditional materials, such as drywall, are not easy to bend on your own, much less place them in a rigid frame.
The simplest solution would be to make a screen from plastic; it bends well, is not susceptible to moisture and is relatively inexpensive. In addition, you can choose plastic sheets a variety of shades.
An excellent way to hide all plumbing communications and give the room completeness is to install a screen under the bathtub. And in order for the screen to fit perfectly and you save money, you can make it yourself.
A bathtub installed without a screen does not look very elegant even in the neatest and most stylish bathroom. Therefore, you should think carefully about how you can close the space under it in such a way that access to plumbing communications is not blocked and all functionality is preserved.
A universal solution to this problem can be a special screen installed under the bathtub. And in order to get a beautiful, unique and unusual detail interior, you need to abandon the ready-made purchased screen and make a screen for the bath with your own hands.
Which material to choose?
The easiest and most popular screens to manufacture are plastic ones, which are not afraid of dampness and are quite durable. The screen can be covered with a special film or made of multi-colored plastic that matches the tone.
Those who do not intend to use the space under the bathroom as storage can install themselves, which should be equipped with a door so that you have access to plumbing equipment if necessary.
Support frame
For each screen, you need to build a special frame, onto which the panels themselves must then be attached. The frame can be made of aluminum or wooden profiles with parameters 40x40, 30x30, 25x25.
Before starting work, you must make markings on the floor and walls in order to mark as accurately as possible all the lines along which you will install the screen under the bathtub with your own hands. You can also install transverse profiles that will help strengthen the screen and give additional rigidity to the entire structure.
Then all the profiles must be joined together and attached to the floor and walls of the bathroom.
A rather original and at the same time stylish solution could be a brick screen, which will then be finished with decorative plaster or tiles. Such a screen can be easily made independently.
When starting work, you need to mark the future screen so that the edge of the bath is flush with its wall.
You should also make vertical markings on the opposite wall. When laying bricks, this marking will serve as a guide. It is recommended to do the masonry using a cement-sand mortar of ¼ or ½ brick.
If desired, you can make a special niche for feet in the screen and be sure to build a small door so that there is access to plumbing communications and drainage. You can make such a door yourself from plastic panels or purchase a ready-made one in a store.
Popular screens
This screen is the cheapest, and it is also very easy to manufacture and install. The plastic does not require any additional finishing, so you can use the bath immediately after installation. If necessary, this structure can be easily disassembled in order to open access to the space under the bathroom.
Before you begin installation, you should stock up on everything necessary materials: in addition to the panels themselves, you will also need a starting profile, which will need to be secured around the entire perimeter of the screen.
In order to prevent the plastic from losing its shape and bending over time, it is necessary to strengthen the frame with an additional profile installed in the middle of the structure.
Installation should begin by gluing the bottom of the profile to the floor using sealant. Then you need to use a construction knife to cut the strips of lining and insert them into the starting profile. You just need to cut a hole in advance in the place where the door will be located.
To make such a screen, you should use special drywall, which is intended for rooms with high levels of humidity.
One of the main advantages of a plasterboard screen is that it can be constructed with small shelves, so it can successfully replace a chest of drawers or a cabinet in a small bathroom.
Such a screen is made from sheets of plasterboard, which are fixed to a frame assembled from a metal profile. Depending on how the bathtub itself will be located, the frame can be installed either on only one side of the bathtub, or on both sides at once. The amount of materials you will need to build the screen depends on which option you ultimately choose.
In order to make such a screen for a bathtub with your own hands, you will need the drywall itself, paint, impregnations and sealants, a profile for drywall and putty.
Work should begin with marking the frame. Then you need to assemble a frame from the profile in accordance with the future shape of the screen and install it using a screwdriver and drill under the bathtub.
First of all, you need to secure the smaller part of the structure, then the larger one, and then fasten them together. After the sheets of drywall are fixed to the frame, their surface must be treated with sealant, puttied and coated with a primer. When all layers are dry, finishing work can begin.
Remember that it is necessary to provide a technological hole.
Ceramic tiles can be used to decorate screens made of brick, MDF or plasterboard. First you need to prime the surface, then apply putty on it and wait until it is completely dry. Then you need to thoroughly rub the surface with sandpaper and prime it again.
The tiles must be laid in exactly the same way as usual, using crosses for the seams, special glue and grout. The advantages of such a screen are its durability and decorativeness.
If desired, you can choose some interesting color combination, or you can even make sliding doors, which will be a little more expensive and more complicated.
Before installation, it is necessary to impregnate MDF boards with special impregnations, as they are afraid of moisture. Then they need to be coated with a primer and secured to the frame in the same way as gypsum board sheets.
To additionally protect such a screen from moisture, it is necessary to make a ventilation hole, which should be located away from the process door. Most often, a small slot is made for this purpose, 2-3 cm wide and 5-10 cm long. To ensure that it does not disturb the overall appearance of the bathroom and does not catch the eye, it must be closed with a decorative plastic grille.
You can finish the MDF screen with plastic or tiles.
This type of bathtub is more fragile than a cast iron bathtub, so you need to be very careful when installing the screen. Its design is no different from the design intended for a cast iron bathtub.
Before starting installation, it is necessary to apply markings to the side of the bathtub and mark the places where the screen will be fixed.
Then the upper part should be aligned with the side of the bathtub and marks should also be applied to it, which should coincide with the marks on the side.
The screen can be attached to the bathtub using self-tapping screws and mounting studs.
To ensure that the entry points of the self-tapping screws are invisible, it is recommended to cover them with special plugs painted to match the bathtub. You can also build a screen from brick, although you should first make the screen itself, and only then install the bath on top of it.
To make such a screen, you will need plastic or aluminum guide profiles, standard plastic panels, self-tapping screws and a square pipe, the cross-section of which should be 10x10 mm.
First of all, from a pair of parallel tubes, which must be connected transversely by the same tube, it is necessary to make a frame. Position vertical racks needed depending on the size of the screen.
After painting the pipes, you need to install guides on them - attach one to the upper frame, and the other to the lower. After this, you should cut the panels and insert them into the grooves of the guides.
Typically, screens that are installed under the bathtub, taking into account the shape of the bathtub itself and the characteristics of the room, are made rectangular. The only exception may be screens designed for corner baths, which have a curved design.
Depending on what material the bath screen is made of, you can improve it or add some features to it.
For example, plasterboard or brick screens may have small niches for feet, which are needed to ensure that the feet do not rest against the wall. Such a niche can be either inclined or straight. Screens may also differ in the method of opening - hinged or sliding. The second option is more preferable, since in this case you will not need additional space for the doors.
The best thing sliding screen made from plastic lining or PVC panels, since these materials are the easiest to work with, and the screen that is made from them is very durable.
For installation you will need a special aluminum profile, from which all door guides will be made.
First you need to install the frame on which the guides should be installed. The length of the guides should be equal to the distance between the walls or the length of the bathroom.
The doors should be secured to the frame, placing them in the first profile groove on the sides of the screen. The central part is most often made motionless and placed in the middle groove.
Using spacer bolts, the finished screen must be attached to the bathtub, and furniture handles must be installed on the movable doors.
If you want to create a screen for a corner bathtub with your own hands, then you need to take into account that materials such as drywall are quite difficult to bend yourself and then place on a rigid frame. Therefore, the most the best solution The screen will be made from plastic, which is relatively inexpensive, is not afraid of exposure to moisture and bends well. In addition, nowadays you can purchase plastic panels in a wide variety of shades.
First of all, you need to attach the plastic guides to the floor in the bathroom, repeating the curve of the bathtub itself. Using liquid nails, you need to attach wooden blocks to the top, which will serve to fix the top guide.
Another screen option could be a brick screen, because the masonry can be made of any shape, and then decorated with mosaics or tiles. But such a screen must be built first, and then the bathroom must be installed on it.
In order to rationally use every centimeter of the bathroom, designers suggest using a variety of cabinets, niches and shelves. But what about the space under the bathroom? Today in the article we will talk about bath screens, their types, characteristics and cost.
What to make a bath screen from?
The function of such a screen is purely decorative, namely, to hide all unsightly communications located under the bathroom. In addition, you can use it rationally - as a storage space household chemicals, for this you just need to provide special drawers and shelves.
There are many materials for the screen. Choose according to your taste and cost:
Glass, mirrors and wood - almost any material can act as a screen for the bathroom; today we will look at the most practical of them.
What types of screens are there?
Among the main types of screens are the following:
- Regular.
- Made in the form of a plastic panel;
- Universal. The same plastic panels, but in an aluminum frame
- Screens without frames.
The most economical option, installation is carried out under the bathtub
End
They can be performed with or without a frame.
- The process of laying a brick screen with your own hands consists of the following steps:
- First you need to prepare tools and materials.
- There is nothing complicated here, everything is the same as with regular masonry:
- Cement;
- Sand
- Trowel;
Brick; Plumb; Level. At the second stage we perform
preparatory work - we make markings. In order for the tiled screen to be flush with the side of the bathtub, use a plumb line to draw a line on the floor - from the side to the floor.
- From the resulting line we retreat a distance equal to the width of the tile itself and the mortar on which it will be glued - this will be the edge of our brickwork. On vertical walls – we hit the line at the same distance – and the marking is ready. Actually, you can start laying the brickwork itself.
- Profile (CD, UD; starting U-shaped plastic profile)
- Self-tapping screws and dowels
- The plastic panels themselves.
In addition, the design can include sliding or opening doors if you want to provide it with additional storage functions for household items. Laying a brick screen - do it yourself step by step
An important point: do not forget to leave the technical window - in the future, communications will be accessed through it.
Separately, it is worth stopping at the foot niche. It is not necessary to do this, but such a small nuance will make using the bathroom much easier, especially when you are bathing a child or animal. There are two options here - or simply leave the opening the size of one or two courses of masonry, covering it with steel strips to support the upper bricks.
Or make a slanted wall - this requires certain skills, but it looks more impressive.
Armed with a grinder, of course using a diamond wheel, we cut out the brick that we will need for the side walls. Next, we lay the brick using the dressing method, and if necessary, using the same grinder, we make the top row flush with the rest of the walls.
An important point: do not place the bath directly on the brick, leave a gap of 1-2 cm - and seal it with mounting sealant.
The cost of materials will be about 700 rubles.
After some time, we cover the screen with tiles, not forgetting to hang a door for our technical window - you can buy a ready-made one, or make it yourself from a piece of aluminum.
Sheathing with plasterboard - do it yourself step by step
When starting to make a screen from plasterboard, you need to decide what material to make the frame from. There are two options: wood or metal.
As with laying bricks, in this option you can provide a niche.
When installing drywall in the form of a continuous screen, as in the first case, we make markings and install a guide profile along the resulting lines. Not close, so as not to transfer the weight of the bathtub onto the structure, but at a distance of 1-2 cm from the side we attach a horizontal profile. Fill the resulting gap between the side of the bathtub and the profile with sealant or polyurethane foam.
To make the structure more resistant to deformation, more vertical profiles can be mounted.
It's time to attach the drywall. To do this, take a solid sheet and treat its edges with a moisture-resistant sealant.
Installation is done using self-tapping screws. Make sure that the edge of the drywall is flush against the edge of the bathtub.
The version of such a screen with an equipped niche differs only in changing the frame in the lower part. If in the first case it was one piece of profile. Now there will be three of them: two along the marking line that we made from the side of the bathtub, and one for the niche. We make vertical guides at an angle on both sides of the niche - the frame is ready.
When the frame is covered with plasterboard, we cover it with tiles, using glue or liquid nails.
Sheathing MDF, OSB - do it yourself step by step
Installing MDF or OSB panels is practically no different from installing drywall. The only thing we pay attention to is that all panels must be pre-treated with an antibacterial primer to avoid the appearance of fungus in the bathroom.
And we remind you once again that you need to choose only moisture-resistant panels.
The cost of the panels depends on the manufacturer and is 300 rubles. per sq. m.
Screen made of plastic lining - do it yourself step by step
If you don’t want to think about whether your screen will become a victim of moisture or fungus, we recommend choosing the option made of plastic lining. Firstly, installation of this material will not be difficult, and secondly, it is absolutely resistant to various deformations, and it can also be easily disassembled if you need access under the bathtub.
So, as when installing any other panels, we will need:
Using sealant, we install a starting profile around the perimeter of the screen, and attach the panels to it, not forgetting about the technical window.
Another significant advantage of this material is that it does not require additional cladding, there are a lot of color options, you can choose the one that fits into the interior and immediately use the bathroom. In addition, its cost is very attractive - from 150 rubles. per sq. m.
Conclusions - which is better, cheaper, more reliable?
There are plenty of options and materials for decorating the space under the bathroom. It won’t be difficult to build a screen for a bathtub with your own hands. special labor. The cost of materials is not high, but you can save a decent amount on the job. After all, installation of such a screen starts from 1,500 rubles. depending on the selected option.
Our advice is to choose materials that are easiest to work with: plastic or drywall.
In addition, if you do not want to spend time and money on cladding - the best choice- this is plastic, because thanks to the many colors, you can choose an option that not only will not be inferior to tiles, but will also emphasize the design of your bathroom.
In order to qualitatively equip your bathroom, you should not forget about the aesthetic side of the finish. If you think that after renovation it is enough to install furniture and plumbing and that’s all, then you are deeply mistaken. In some cases, communications running under the bathroom remain visible, which, of course, do not add aesthetics to the room. Therefore, the free space under the bathtub should be covered with something, and a decorative screen is ideal for these purposes. Often, after repairs there is practically no money left, and it is not possible to buy ready-made panels, or there are other reasons, so you can make a bath screen with your own hands.
Aesthetics above all
IN Soviet times The free space under the bathroom, as a rule, was not closed, and no one worried about the aesthetic side of the issue. But time passes, technology develops and makes it possible to make a screen for a bathtub of almost any shape and style. Now Special attention is given small details interior, because they can radically affect the overall picture of the renovation.
Screens for the bathtub can be purchased together with the bathtub or separately from it, but it is not always possible to choose right size and the shape of the structure. Therefore, you can create a homemade bath screen that will not differ from the factory one either in quality or appearance.
And in this article we will tell you how to make a screen for a bathtub with my own hands, what is required for this, what material to choose and other useful things.
Selecting material for the screen
At the very beginning, before making a bathroom screen with your own hands, you need to decide what material will be used.
The most popular today are:
Product requirements
Just like a factory product, a homemade bath screen must meet certain requirements:
- After installing the screen, there should be free access to communications. That is, the design must contain a door, window or canvas made in the form of sliding sections;
- Material or its protective covering must correspond to the special microclimate of the bathroom. In the bathroom there is almost always high humidity, and sudden temperature changes occur. Therefore the usual Decoration Materials cannot be used in the bathroom, because under the influence of these factors they will quickly collapse;
- After installing the screen, the bathtub should not rest on its plane.
Tip: The free space under the bathroom is often used as a niche for storing small items, household chemicals, detergents, etc. You can also install additional shelves on the inside and outside. This solution is especially relevant for small-sized baths.
Creating a brick screen
Brick is a fairly versatile material. In general, making a screen for a bathtub from brick is a classic option.
Creating a brick screen under the bathroom with your own hands is quite simple, you just need to know and take into account the peculiarities of the work process:
- The laying is carried out in a quarter of a brick;
- The screen is placed from one wall to another along the border of the bath;
- To create a correct and strong screen structure, each row of brick is shifted by half of the previous one (“stitched”), that is, a “chessboard order” is obtained;
- The space between the floor and the bathtub is not completely filled; space must be left for a door or viewing window;
- The last row of bricks is not placed close to the bathtub. A gap of 1-2 cm is left between the brick and the bathtub; it can be blown out with foam or a decorative overlay can be installed.
When making a screen for a brick bathtub, you need to remember that this is not a completely finished structure. After the masonry mortar has completely dried, it is mounted on top of the brick. decorative finishing, it can be tiles, laminate or mosaic.
Important! It is extremely undesirable to use wallpaper, because high humidity and temperature will cause the service life to be very short.
Making a screen from MDF
Screens made from MDF panels are quite popular, because with careful use and high-quality processing surfaces they can last long time, which sometimes amounts to 10 or more years.
Before making a screen for a bathtub from MDF, a special frame is installed from a metal profile or wooden beams.
Important! If wood is used for the frame, it should be pre-treated with a special antiseptic.
When the frame is completely ready, you can begin covering it with MDF panels. To properly protect the material from moisture penetration, it is treated on all sides with a primer, and the points of contact with the floor are treated with silicone sealant.
The screen must have technical and ventilation holes approximately 2x5 cm in size. To make such holes look harmonious, decorative grilles or panels for ventilation ducts can be installed in them.
Manufacturing of plastic screens
Making bath screens from plastic panels is much simpler than structures made from MDF. Since there is no surface pre-treatment process and decorative cladding, installation time is reduced several times.
Note: The undoubted advantages of plastic screens include easy installation and dismantling of the canvas.
Before installing the structure, you need to build a frame; for this, you should use a profile for the screen under the bathtub. Its installation is mandatory because it will fix the panel under the bathtub in the desired position. Thanks to this design, you can create a sliding structure. This solution will allow you to rationally use the space under the bathroom.
The frame is made of several parts. The starting profile is installed first, which serves as a support for subsequent structures. The reliability of the installation will determine whether the structure will warp or not. Subsequent elements are mounted on special slides, along which the canvases will move.
Just like in MDF screens, plastic structures must have ventilation and technological holes.
We must remember! When making a screen for a bathtub yourself, you need to take care of sealing the area adjacent to the floor. This procedure can be performed with sealant. Such actions will prevent water from entering the space under the bathtub.
Decorative tile panel
The process of creating a screen from tiles is very similar to the previous ones, only here the pre-prepared frame is sheathed moisture-resistant plasterboard, after which ceramic tiles are laid.
Unlike previous designs, the tiled screen for the bathroom is made monolithic with your own hands. Therefore, before starting the installation, you need to think through the entire design of the screen where the communication will take place, ventilation and technical openings will be located. Since access to the pipes will be limited, at the very beginning you will have to take care of creating a window or door for servicing the communications.
Before making a bathroom screen from ceramic tiles you need to decide on the material for the base. The best would be brickwork or plasterboard construction. The frame for plasterboard can be made of wooden blocks or a metal profile.
Ceramic tiles are laid using waterproof tile adhesive for kitchens and bathrooms, and the seams are sealed with a special grout.
Important! The grout must contain substances that prevent the formation of fungus and mold.
A few words in conclusion
So that the screen for the bathroom with your own hands is of high quality and creates cozy atmosphere indoors, use our tips on how to make a screen for the bathroom, and you can also study video tutorials and photo reports from masters.
