The screen is an optional part of the bath; it can be installed without a fence. But open communications don’t look at all aesthetically pleasing, do they?

Do you want to hide the communications of your bathtub behind a special screen, but you cannot find a ready-made barrier due to the non-standard design of your plumbing?

We will help solve this problem - the article provides interesting ideas how you can make a screen for a bathtub with your own hands, what materials are suitable for these purposes and which frame option will be optimal for a particular bathtub.

For clarity, we selected colorful photos with finishing options and presented detailed instructions for installation of the most popular materials.

Moreover, making a nice screen is not at all difficult if you know some of the nuances. And the videos step-by-step installation will make working on the screen easier even for a beginner.

Modern acrylic bathtubs often sold with ready-made plastic screens made to fit their dimensions. they are quite simple.

Regarding steel and cast iron structures, then, as a rule, there are no screens for them and you will either have to make them yourself or leave them open.

Open pipes look rather unattractive and spoil the interior of the entire bathroom

Whether or not to close the bathtub is a matter of taste and preference of the owners.. But surely everyone wants to have a beautiful and tidy bathroom. The screen gives the bath an attractive and finished look appearance and closes the sewer pipes protruding from under it.

However, this is not the only reason to install a barrier. The space under the bathroom can be usefully used for storing various household appliances by making.

You can make niches in the fence, install hinged or sliding doors.

The bathtub can be installed without a barrier if this is provided for by the design idea. In this case, it is necessary to purchase a bathtub with a special coating and install it on beautiful legs

At open design When bathing, water constantly gets under the bathtub and dirt accumulates. A humid environment promotes the formation of fungus, mold and various bacteria.

The floor under the bathroom also gradually wears out and takes on an unattractive appearance.

To avoid these troubles, it is better to cover the structure with a beautiful screen.

The screen performs not only an aesthetic, but also a protective function, preventing moisture from penetrating under the bathtub. Barrier doors will become a convenient place to store household small items

Requirements for barriers under the bathtub

There are quite a lot of options on how you can make a beautiful and functional screen for your bathtub. When choosing the material for its manufacture and installation method, it is necessary to take into account the requirements for the fence.

There is always a humid environment in the bathroom, so to make the screen you need to use only moisture-resistant materials that can withstand temperature changes and humidity well.

Otherwise, fungus and mold may form on the fence, or it may collapse under the influence of adverse factors.

When installing the screen, it is necessary to make technological holes in it. You can install hinged doors on one or both sides of the bathtub

The fence must be completely sealed to prevent water and dirt from entering the interior. However, you cannot make a completely blank screen.

It is necessary to provide access to communications located under the bathroom. For this purpose, small windows are left or doors are made.

Barrier design options

Before installing the screen under the bathtub, you need to decide on its design. Surely, many would like to see their bathtub not only beautiful, but also comfortable and functional.

Fencing with wide sides

One of possible options– make a fence with wide sides. In this case, the bathtub looks as if it is recessed inside the frame. This design is very convenient: the sides act as shelves on which you can put various bath accessories.

A bathtub with sides looks more harmonious and fits perfectly into the surrounding interior. This design is suitable for large bathrooms where there is sufficient space for its installation.

Many people are concerned about the question: will the screen interfere with a comfortable approach to the bathtub? This point is especially relevant for older people.

IN in this case Even at the stage of installing the frame or making brickwork, a special recess is provided for the feet. It is usually made in a rectangular or square shape.

Sloping footwell. A recess of this shape can be made if the frame is made of a metal profile. IN brickwork it is almost impossible to make a bevel

Doors and technological openings for access to the sewer can also be made in different ways.

How to make a sliding screen?

When all the parts are prepared or purchased, we proceed to assembling and installing the screen.

You will need the simplest tools: a screwdriver, pliers, a screwdriver, a level, and a set of wood screws.

Image gallery

Regardless of which bathtub finishing option you choose, you must first make a frame from wood or a metal profile, onto which the finishing material is then attached.

The base for the bathtub can also be made of brick.

Laying ceramic tiles

The tiles can be laid both on a brick base and on plasterboard sheets.

You need to use special tile adhesive. Start laying the tiles on the side that remains open so that the cut slabs are hidden by the plumbing fixtures.

Tile is the most hygienic and reliable covering for a bathtub screen. If installed correctly, it will last for decades

The top row is laid first. Leave a gap of about 5 mm between the sides of the bath and the tiles, and after finishing the work, install a plastic plinth.

Don't forget to insert plastic crosses between the tiles to secure the gaps. After the glue dries, the seams are rubbed down.

Especially for beginners - detailed photo instructions for installing a screen, the decorative cladding of which is tile.

To install tiles on drywall you will need:

Image gallery

The first stage is the installation of a metal profile frame.

It is a rectangle that outlines the perimeter of the space under the bathroom.

Image gallery

When the installation of the frame is completed. We install drywall and lay tiles.

Image gallery

We cut out two ventilation holes at the bottom of the screen using a drill with a special cylindrical bit.

As you can see, there are a lot of options for making homemade screens. But if you don't want to waste time or doubt own strength, you can buy a ready-made screen for the bath by selecting in the store the best option.

We also have an article on our website about what types of screens exist and how to choose the best option - and take a look.

Conclusions and useful video on the topic

You can learn how to make a screen for a bathtub from PVC panels from the following video:

The process of making a frame from metal profiles and attaching sheets of drywall to it is described in detail in the following video:

A DIY screen allows you to create unique interior baths and bring your design ideas. It’s quite possible to make it yourself, you just need to put in a little effort and imagination.

In addition to the screen arrangement methods discussed above, there are many other finishing options. You can use a waterproof membrane or nylon fabric, upholster it, or mosaic it.

Have you implemented one of the ideas for masking communications proposed in our article in your bathroom or come up with an original design for the screen?

Or do you have a different opinion about the installation process of one of the types of materials discussed? Please share your experience with readers by leaving comments below this article.

The screen under the bathtub is not so necessary, but a very significant element of the design of this room. It performs two tasks: it decorates the plumbing equipment and allows you to get additional space. The latter is very important for small apartments.

The bath screen is a panel made of plastic, plexiglass, MDF or other durable materials. At the bottom of the product there are screw legs, the length of which can be changed by screwing in and out. The panel is held in place by a frame consisting of 4 aluminum strips located along the perimeter of the product: two horizontal and two vertical.

This frame is the main reinforcing element, thanks to which the screen is securely fixed in a vertical position. Installation is simple: the product assembled from components is tilted at a slight angle and the upper part is placed under the bathtub. Next, install it in the desired position and fix it by twisting the legs.

This is how any screen model, or sliding, is mounted. The former differ from the latter in the design of the vertical panel. For sliding ones, it can consist of 2 or more parts that move relative to each other using a system of grooves and rollers.

Design of decorative panels for a bath

The design of the screens can be very different. A wide range of colors allows you to choose the most suitable product for a specific room. Panels with 3D photo printing, which creates the effect of depth of space, look original and stylish. For premises decorated in laconic style, plain screens, glossy or matte, are suitable.

The designers did not ignore the legs of the products. Now they not only serve as a support, but also serve as a decorative element. More expensive models may have antique-style legs. Original screens with supports made in the shape of animal paws, geometric shapes, colors.

If handrails for people with limited mobility are installed on plumbing equipment, more durable panel models that can withstand significant weight loads are chosen. The market offers a wide range of accessories and components for the bathroom. Therefore, it will not be difficult to choose those that will highlight the style features of a particular room.

Types and features of sliding screens

Although the sliding screen is more complex design than a solid one, it is still very easy to assemble and install. Dismantling the product is also easy. The simplest models are equipped with a plastic or aluminum frame, the upper and lower strips of which have a profile in the shape of the letter W. Two or three plywood or plastic panels are installed in these grooves.

More expensive models are equipped with a system of rollers, which are a transition link between the frame and the ribs of the “doors”. Such screens are more convenient to use, since moving and sliding the panels in them is much easier.

In the middle price range there are models made of inexpensive plastic and thin anodized aluminum tubes. Each of these types of materials has its own advantages and disadvantages. Plastic panels are fragile, but have an undoubted advantage: moisture resistance. Anodized aluminum frames are more durable, but are susceptible to corrosion. Rust develops in areas of damage (scratches). It is very difficult to avoid their appearance, since the bathroom is a regularly used room.

The designs of screens for bathtubs are designed taking into account the dimensions of this plumbing equipment. The standard length of the frames is 150-180 cm. Height is 56-58 cm. If necessary, such frames can be easily shortened by sawing off part of the upper and lower planks using a metal file. But you won’t be able to increase the length of the frame.

Sliding plastic and acrylic screens can be different: in the form of folding curtains, sliding panels and opening doors. The latter are used for models made of more massive material: MDF.

Manufacturers	Materials	Peculiarities	average price
	Plastic, eraser with acrylic coating	Panels different colors and shades, with photo printing	3600 rub.
	Acrylic	Curly shape of screens	From 12,000 rub.
	Acrylic, plastic	Made to order	From 11,000 rub.

Installation of a sliding screen with an aluminum frame

The plastic screen under the bathtub is a fragile and insufficiently reliable structure. Therefore, the installation process involves different ways its strengthening. First of all you need to find right place to install the screen. It should be slightly turned (recessed) towards the bathtub. In this case, drops of water flowing from its side will not fall into the space beyond decorative panel. It (the panel) must be installed strictly vertically.

To strengthen the structure, several methods are used that can be combined with each other.

1. A metal profile frame is mounted, the side posts of which are attached to the walls of the bathroom.
2. Fix the left and right sides of the screen frame using moisture-resistant sealant (the best choice is sealant for the manufacture and repair of aquariums).
3. Metal corners are attached to the bathroom walls, on which the screen frame will rest. For mounting with outside panels use self-tapping screws with decorative caps.

For execution installation work you will need tools that every owner has in their arsenal.

1. Screwdriver or drill.
2. Screwdrivers.
3. Roulette.
4. Level.
5. Pliers.
6. Metal construction square.

Installation stages

Step 1. Find the middle of the panel. To do this, either measure the length of the screen with a tape measure, or find the required parameter in the annotation for the product.

Step 2. Similarly, determine the midpoint on the top side of the bathroom.

Step 3. Make appropriate notes with a simple pencil. These actions are necessary in order to avoid displacement of the panel relative to the side, since the system is quite mobile.

Step 4. Place the screen next to the bathtub and tilt it so that you can slide its upper part over the side. To do this, it is enough to tilt the product at an angle of 30°-40°.

Step 5. Find the optimal location of the screen and use a marker to make corresponding marks on the walls.

Step 6. If metal corners are chosen as a reinforcing element, fasten them along the marked lines. To do this, you will need a drill, a corresponding drill, and dowel-nails.

If you decide to build a frame, choose a metal profile of a larger cross-section: rack or ceiling. For example, PP50x50 mm or PP60x27 mm. A frame made of guides (PN28x27) will not be so reliable. For screens up to 150 cm in length, it is enough to mount a reinforcing frame around the perimeter. For longer panels it is necessary to install 1-2 intermediate posts.

The first stage in building a frame is taking measurements. In accordance with the data obtained, strips of metal profiles are cut. They are connected to each other using self-tapping screws, corners or special fasteners - crabs (needed if there are intermediate posts). There are no difficult moments in installing such a frame. Therefore, anyone can build a frame for a bathtub screen.

Step 7 Install the assembled screen close to the supporting frame or to metal corners.

Step 8 Unscrew the metal pins in the legs of the screen so that it is motionless.

Step 9 The screen frame is secured to the frame or metal corners with decorative fasteners.

Trying on the screen and fixing it

Step 10 Fill the gaps between the walls, the screen frame and the side of the bathtub with silicone sealant.

Design features and installation of screens for acrylic bathtubs

Most models of acrylic bathtubs are shaped, so straight screens are not suitable for them. Manufacturers of this plumbing equipment are developing special designs that make it possible to hide the installation elements of acrylic bathtubs. Typically, such screens are included with models. But they can also be purchased separately from plumbing equipment.

Screens for acrylic bathtubs can be monolithic or sliding. The installation process is similar. Feature of such shaped screens - an L-shaped protrusion at the top of the product. This recess is needed so that the panel fits flush against the side of the bathroom. But despite the fastening system, such screens are relatively movable, since they are made of plastic with an acrylic coating. In order to avoid pushing towards the space under the bathtub, various techniques are used.

Installation of acrylic screens is not difficult, but installation instructions are still needed. All types of these panels are fixed using a system of supports, which can be spring or plastic. The fastening elements are located on the back side of the screen.

Plastic decorative overlays are attached during the installation of the frame for the acrylic bathtub.

The springs are inserted into special protrusions of the lower frame on which the bathtub is installed. This support consists of several metal profiles of rectangular cross-section and has its own “legs”. As a rule, standard screens are equipped with three springs, one of which is located in the middle of the product, and the other two on the sides.

Manufacturing technology of a sliding screen for a rectangular bathtub

Step 1. Cooking workplace. If you plan to insulate and soundproof the bottom of the bathtub, then it is advisable to carry out this work before installing the screen. For example, before installing the bathtub on the legs, stick an insulating material (available at a car dealership) to the bottom of the container, which will reduce the noise level when pouring water.

Advice! When installing a bathtub, use not only the legs that come with the kit, but also additional supports, for example, made of brick. This guarantees better stability and extends the service life of the product, and also guarantees the tightness of the seam between the side and the wall.

Step 2. We prepare everything you need. To make a screen, you can use plastic panels of any shade that matches the decor of the room.

To frame the panels you will need a plastic U-shaped profile, and the lower guides will be made from the F-shaped profile. The top guide will be made of plastic profile, which is usually used when installing plastic panels on the wall.

Step 3. We work with panels. It is necessary to draw the configuration of the future screen on a piece of paper and indicate the dimensions. The screen may have additional recesses for laying pipes or other communications. It is necessary to carefully cut the panels using a jigsaw according to the plan, and then use sandpaper to remove burrs from the ends.

Using a miter box, you need to cut the U-shaped profile at an angle of 45 degrees, then glue the edging on the panel using silicone sealant.

To avoid drilling additional holes, use self-adhesive sliding door handles. Degrease the panel surfaces, remove protective film from the handles and press them to the surface of the plastic.

For mortise handle You will have to drill a hole using a rosette bit. The diameter of the hole should match the diameter of the handle. To install the handle, you need to apply a little sealant to the edge and simply insert it into the finished hole.

Rose nozzle

Step 4. We fix the upper guide with liquid nails. It is important to thoroughly degrease the lower part of the bathtub rim to ensure high-quality fixation.

Step 5. We fix the lower guide from the F-shaped profile. It is necessary to drill several holes in the profile shelf to fix it to the floor.

To make markings for drilling on the floor, we apply the profile and use a marker to mark the drilling points through the profile. First we use a drill for tiles, then for concrete.

We drill holes in the floor and blow dust out of them. Insert plastic dowels into the holes. We press the profile to the floor and tighten the screws. You can apply a thin layer of sealant between the profile and the tile for a more aesthetic appearance of the installed structure.

Step 6. We insert the doors into the grooves of the lower and upper profiles. This completes the work.

Video - DIY bath screen

A sliding bath screen is a structure that includes two or more doors and a guide frame. Installing such a screen allows you to decorate plumbing equipment, as well as save bathroom space and maintain access to pipes in case of breakage. The last point is very important for apartments with small dimensions.

Let's consider the main advantages of using sliding screens for the bath:

• Installation of this design is quite simple. It can be carried out by any person who does not have special construction skills and knowledge;

• acceptable cost. Today, such screens are made from different materials, so everyone can choose a product in the right price range;
• simple and convenient dismantling if necessary (for example, when replacing communications under the bathroom);
• a wide range of models that differ not only in color, but also in design.

Note! Doors that slide to the side when opened save useful space in the room, which is a definite plus for small apartments.

Among the drawbacks of the sliding model, only one can be noted, related to plastic products - the weak resistance of the guides. Plastic guides tend to deform after 2–4 years of use, which makes it difficult for the doors to move.

Sliding screen design

The frame material of sliding structures may vary, depending on the price. Today you can find frames made of plastic or aluminum. The most expensive options are equipped with a roller mechanism. Plastic options have the lowest cost and are also resistant to moisture. The main disadvantage of polymer frames is their weak strength. Aluminum frames, unlike plastic ones, are more durable, however, less resistant to moisture.

Diversity color solutions inherent in both the first and second frame options. But paint applied to aluminum structural parts tends to come off and peel over time.
The roller sliding design used for bath panels is most similar to that used in sliding wardrobes. The rollers are fixed on the panel and when the sash is opened they run along the guides. Such panels are convenient and aesthetically pleasing, but they are also more expensive than simple models.

Some screen options are equipped with shelves that are used for storage household chemicals, as well as various other accessories. Design solution This type significantly increases the functionality of the bathroom, especially of small sizes. The cost of bath screens with shelves corresponds to their functionality.

Sliding screen for a bath: components and main design functions

Sliding screens often include the following structural elements:

• panels or doors, the frame of which is made of plastic, aluminum, and other metals;
• accessories;
• installation instructions.

Helpful information! Sometimes sliding screens are decorated with various materials. The most common decorative element in this case is a mirror. Using a mirror has several disadvantages, including: difficult maintenance and very weak strength (the mirror surface often breaks).

The simplicity of design and practicality of such models do not in any way affect their functionality. Let's look at their main functions:

• protection of communications from water ingress;
• hiding communications and other items (plunger, household chemicals) that look inorganic in the interior of the bathroom;
• decorative

You can buy a sliding screen for a bathtub in any construction hypermarket, as well as on the market. A variety of models allows you to choose the appropriate option for any interior.

Types of sliding screens for bathtubs: 150 cm and 170 cm

These products come in a small range of sizes. The dimensions of sliding screens are selected depending on the size of the room and, directly, the bath. There are two length options for standard sliding models.

The minimum number of sashes in a sliding screen for a 150 cm bathtub is two, and the maximum is four, however, there are exceptions. The height of bath screens ranges from 506 to 560 millimeters. If necessary, you can adjust this indicator yourself. Height adjustment is quite simple - using the legs.

Sliding screens for bathtubs 170 cm

Models that have this length are the most common. Sliding screens for a 170 cm bathtub include from 2 to 4 doors, which are moved back due to a mechanism similar to the mechanism of a sliding wardrobe. The height of this structure varies from 506 to 560 mm. You can buy a 170 cm sliding bath screen in any specialized supermarket or store.

You can purchase products of greater length, for example, 180 cm bath screens. Based on the design options of these products, there are 4 main varieties:

• simple (plastic doors and aluminum frame);
• multifunctional (the ability to adjust the size is added to the previous features);
• products that are produced without frames;
• products obscuring the end part of the bathtub bowl.

Thanks to its simple design, you can make your own sliding screen for the bathtub. Photos and prices of similar products can be viewed in manufacturers’ catalogs, where you can see the use of these structures in real interiors.

Plastic screens for bathtubs

Models made from this material, as mentioned above, are considered the most common. They have become widespread due to their reasonable cost, as well as other positive qualities, including:

• resistance to fungi and mold;
• resistance to temperature changes;
• rot resistance.

Waterproof plastic material is a huge advantage that determines its prevalence. Constant humidity in the bathroom negatively affects products made from chipboard or MDF. Over time, they become completely unusable and require replacement. In turn, plastic does not swell from moisture, and it is also not afraid of rotting. Today on the construction market you can find products of different lengths - from 120 to 180 cm and above. Sliding screens for bathtubs 150 cm are easy to install, since their length is standard. The same applies to sliding screens for 170 cm bathtubs.

Note! Polymer doors do not require individual care - just wipe them with a regular cloth. Drops and stains on a polymer material are not as noticeable as, for example, on a mirror surface, which is also a plus.

Screens for acrylic bathtubs

Acrylic sliding panels often come complete with a bathtub, which is made of the same material. They are distinguished by their original design and, as a rule, consist of a solid panel. They can be purchased separately, however, do not forget that they are only suitable for acrylic bathtubs due to the mounting features.

Installing an acrylic screen has some features that you need to pay attention to.

Let's look at how to install bath screens made from this material:

• first of all, you need to find the center of the screen panel and mark it with a marker;
• Next, you need to place part of the panel over the side of the bathtub;
• at this stage the panel is applied to the bathtub;
• the place of fixation is marked, which should coincide with the first mark;
• the studs are screwed on;
• the nuts are used to fix the corner that is needed to fasten the panel;
• holes are made in the marked places (with a drill);
• the structure is fixed with self-tapping screws, which are masked using plugs.

The acrylic construction is reliable and durable. If the installation rules are followed, it will last for more than one year.

Features of sliding panels made of MDF

MDF is a material that is made by pressing wood chips. Taking into account the humidity of the bathroom, MDF screens are made using moisture-resistant impregnation. Special resins act as such impregnation.

Related article:

How to choose the right size product for the bathroom. Popular manufacturers and models of bathtubs. Price policy.

The main advantages of moisture-resistant MDF structures are practicality and a fairly long service life. Like their polymer counterparts, these products are distinguished by a wide range of colors. Various designs and patterns are applied to them as decoration. To enhance the moisture-resistant qualities, the surface of the MDF board is laminated with plastic films.

A plate made of this material has quite large mass, therefore, the guides for it are made of durable metals. The MDF design differs from screens made of other materials in that it often consists of 3 sashes. Moreover, the middle door is stationary, and the side doors open like in sliding wardrobes. Most common sizes MDF screens under the bath: 150, 160, 170, 180 cm.

Sliding glass and mirror screen models: increasing the bathroom space

Such structures are used much less frequently than plastic ones. This is due to the fact that they have very poor resistance to mechanical stress. However they are different high quality, presentability, as well as resistance to moisture.

The dimensions of such panels correspond to products made from other materials. The easiest way to buy sliding screens for bathtubs is 150 cm. However, glass screens for bathtubs 180 cm are sometimes quite difficult to find. In this case, many companies are engaged in the production of individual panels to order.

Helpful advice! For people whose mobility is limited, there are models of sliding panels equipped with special handrails.

The glass of such a panel can be transparent or colored. In turn, the structure can be either glossy or matte. And also glass sliding models can be made with a variety of designs and patterns. The backlight for such a screen looks very impressive.

The demand for products whose outer surface is represented by a mirror is quite stable. An element such as a mirror fits perfectly into the interior of the bathroom and allows you to visually expand its space. And also the mirror surface of the panel under the bathtub allows you to add a play of light to the room.

Mirror elements can be installed at different angles, and artificial lighting can be added. The finished design looks very original and presentable. The disadvantages of this option include: the fragility of the panel, the difficulties associated with caring for the mirror surface.

Sliding screen design options

The external design of panels of this type can be very different. For example, models that are equipped with photo printing are very popular. Photo printing can be of two types: regular (2D) and volumetric (3D). The latter option creates the effect of depth of space, which looks very stylish and original.

For rooms decorated in a minimalist style, it is recommended to select monochromatic options. The structure of the outer surface of plain models can be either glossy or matte.

Not only the panels of these products have decorative design. The legs, which serve as a support, are also distinguished by their abundance. design solutions. Expensive designs are equipped with antique-style legs. The shape of these elements can be very different - from simple geometric shapes to animal paws.

How to choose a sliding screen for a bath?

Before buying a screen for a sliding bathtub, you need to think about three main points in advance, such as:

• size;
• material;
• design.

The above parameters determine the complexity of installation, ease of use and service life of the structure. As mentioned above, the most common sizes of bath screens are 150 and 170 cm. The material and design are selected individually, depending on the preferences of the owners and the characteristics of a particular room.

If you purchase an acrylic bathtub that has non-standard dimensions, it is recommended to order a custom screen in advance. Otherwise, it is unlikely that you will be able to select the required option. To save money, you can purchase a blind type product. This model is less functional, however, it is suitable for protecting communications.

Helpful advice! To expand functionality, folding screens for bathtubs are often purchased. In most cases, such screens are equipped with special shelves. However, it is necessary to take into account the usable area of ​​the room, since the folding model is not the best choice for a standard, small-sized bathroom.

A panel frame made of aluminum is the most suitable option. Experts recommend using plastic frames only if the panel doors are also made of this material, otherwise ─ the frame may not withstand the load).

For small bathrooms, only a sliding design model is suitable. When purchasing such a screen, you need to pay attention to the following factors:

• serviceability of the roller mechanism;
• quality of guide elements;
• Convenient height adjustment of product legs.

The price of screens for bathtubs can be found on the Internet on websites that sell these products. As a rule, in order to buy sliding screens for a 170 cm bathtub you need to spend from 2 to 5 thousand rubles.

How to install a screen under a sliding bathtub?

The process of installing a plastic panel for a bathtub of this type does not require special construction skills. In order to install this structure, you must carefully study the instructions presented below.

The installation algorithm for a plastic screen looks like this:

• First you need to find the middle of the panel. To do this, just use a regular construction tape measure;
• Next, you need to determine the point that will correspond to the center of the side of the bathtub;
• midpoints are marked with a marker or pencil;
• At this stage, the upper part of the panel needs to be brought over the side. In order to perform this manipulation, you will need to place the product next to the bathtub and tilt it at an angle of 30–40°;
• after this, it is necessary to determine the optimal position of the panel and make the appropriate markings on the wall;
• further, reinforcing structural elements are fixed, for which corners are often used. Fixation is carried out along the marked lines using a drill and dowel-nails. For screens whose length is 150 cm, it is enough to make a reinforcing frame around the perimeter. Screens for 170 cm bathtubs require more serious reinforcement, namely 1–2 intermediate racks. Sliding screens for 180 cm bathtubs also require the installation of intermediate racks;
• Making a frame for a panel yourself is quite simple: you need to take measurements and cut strips of the appropriate length from a metal profile. The joining of elements is done using self-tapping screws or corners;
• We place the panel so that it is located close to the frame or metal corners and unscrew the legs (for fixation);
• At this stage, the panel frame is fixed to the frame or metal corners. Decorative elements are used for fixation;
• at the end, the gaps between the side of the bath and the screen frame are filled with a special sealing compound to prevent moisture from entering the structure.

Helpful advice! For convenience during operation of the sliding system, it is recommended to glue handles to its doors.

Easiest to shield cast iron baths. In this case, it is enough to secure the sliding structure using the legs (you should be careful when fixing the legs of the sliding screen for a 180 cm bathtub). And when shielding an acrylic bathtub, you should be careful, as there is a danger of it lifting when the legs are unscrewed. This is due to the fact that an acrylic bowl weighs much less than a cast iron one.

Making a sliding screen for a bathtub with your own hands

Making a sliding panel yourself is a simple process. If necessary, you can make a continuous screen from plasterboard or MDF. The above materials must be selected based on their moisture resistance. After installing a sheet of one material or another, the screen is covered with ceramic tiles. To access the pipes, such a screen has an inspection window (hatch).

It is somewhat more difficult to make a sliding model, however, if you follow the algorithm of actions, then there should be no problems with installing such a structure. Below we will look at how to make a sliding screen using an W-shaped profile, as well as the materials that will be required for this.

Let's look at what materials you need to prepare to make your own sliding screen for a bathtub:

• w-shaped profile. The profile material is selected depending on the material of the dampers. The most commonly used profiles are aluminum or plastic. The width of such a profile should be no less than 20 mm and no more than 24 mm;
• tubes for racks. Experts recommend using steel tubes. The cross-section of the tubes should be approximately 10 mm.

First you need to make threads on the ends of the tubes. The screen is fixed using special fasteners. Sliding doors It is recommended to make it from cheap and easy-to-handle plastic material. Getting plastic sashes is quite simple: you need to cut the polymer panel into pieces. In order not to make a mistake in the dimensions, it is recommended to take all measurements in advance and make the appropriate markings. Then the resulting parts need to be glued together. Transparent glue is best for this.

The work algorithm looks like this:

1. First, measurements are taken and drilling locations are marked.
2. Using a level, the points where the fixing elements will be located are marked.
3. For the guides (top and bottom), it is necessary to measure pieces of the w-shaped metal profile corresponding in length.
4. The panel is cut into pieces. In this way, the doors of the required size are obtained.
5. Screen assembly.
6. Installation of the structure using spacer posts.

Note! The screen, made on the basis of a W-shaped profile, has some disadvantages. The main disadvantage of this design is the poor resistance of the profile to moisture.

Screen design is a matter of taste. If desired, you can make the doors out of plastic different color, glue handles for convenience, equip the structure with shelves for household chemicals.

Features of installing a screen under the bath: video

Even seemingly insignificant details in the interior will help make the appearance of any room complete and unique. And the same little things can completely ruin our impression. Do-it-yourself sliding screen for a bathtub – a useful thing that can solve many small problems that spoil the mood.

Materials for the bath screen

1. From MDF
2. Made from PVC panels
3. Acrylic
4. Plexiglas
5. Mirror
6. With ceramic tile base
7. From tongue-and-groove slabs
8. From plasterboard.

Choosing a screen for the bath

Screen design

It also varies for these designs. Products are available in standard lengths: 1.5 or 1.7 meters. The height indicator is within 560, 550, 506 millimeters. The product contains special legs that allow you to adjust this characteristic.

1. End screens - cover the corresponding part in the bathroom.
2. Varieties where there are no end frames.
3. Universal models. The aluminum frame contains plastic panels. The length of the frame itself can be reduced if customers so desire. Thanks to this, DIY installation of the structure becomes easier where sewer pipes pass.
4. Normal look. Plastic panels are placed inside the frame; performers try to adhere to certain dimensions.

About MDF structures

Most often, modern buyers make a choice in favor of plastic, but this does not mean that the choice is limited only to it. One of the most common materials is MDF board, which can resist even moisture in large quantities.

The material, at its core, is a type of fiberboard with average density. It is created using pressing technology, when high temperature and pressure are maintained.

Compared to plastic ones, these models are more expensive. But on the other hand, the appearance can be called more massive and impressive. It is best to choose the color and material so that it matches the decor that is already present in the room.

Screens made of plastic and MDF do not move apart using the same mechanisms. Products made from MDF simply open inward, which is very reminiscent of ordinary furniture facades.

MDF is distinguished by higher resistance to mechanical loads.

Installing a wooden screen - expensive and fashionable

In what sizes are the designs produced?

• 540 mm height, 1700 mm length
• 540+ 1600 millimeters
• 540+ 1500 millimeters.

All models have legs, thanks to which the height can be adjusted up to 620 mm.

Several color options are also available.

• Vanilla
• Olive
• White
• Wenge

And these are just a few options for modern buyers.

Should I buy an acrylic screen?

These are models that are suitable only for rooms decorated in a certain style and having a certain appearance.

Such products are most often produced immediately complete with the bathrooms themselves.

For each model, a truly unique piece of jewelry is developed, with a specific set of characteristics.

How can you do everything yourself?

From the very beginning, we need to understand the requirements that any sliding bath screen must meet.

1. There should not be any support for this part near the bathtub itself. The product cannot act as a supporting structure.
2. Near the screen you will definitely need to take care of high-quality sealing of the floor.
3. There must be a technical opening that allows, if necessary, access to all communications. To hide this part, it is allowed to use small doors or plugs.

We buy an acrylic screen complete with a bathtub

Working with bricks

It must be laid between the walls where the bath itself is located. The main thing is to maintain the thickness, it should be equal to half the brick. It is by this amount that all subsequent rows must be shifted. All that remains is to change everything depending on the specified parameters.

It is important to make a special window where the drainage will occur. In the future, just attach a door there small size. The bathtub should not be rested even on brick screens; this is one of the most important rules. You will need to create a small gap between the last row of bricks and the bathtub itself. Usually it is no more than 1-2 millimeters, then it is covered polyurethane foam. After this, the brickwork is sheathed.

What about drywall?

One of the most successful solutions. A wooden beam or a metal profile is perfect for forming the main frame. However, if the choice is made in favor of wood, you will need to treat the material with soil. Otherwise, it will be impossible to completely protect against mold and rot.

The frame requires a small recess, this should be taken into account separately when creating it with your own hands. The facing material will then be on top of the sheathing. As for the thickness, it should be the same as that of this future skin. It is then necessary to deepen the entire structure by this amount. A plumb line will help make the adjustment.

Installing a plasterboard screen

What other work can be done?

The UD profile is fixed along the outlined line. To prevent water from getting under the bathtub, it is necessary to treat the lower part of the structure with sealant.

CD is a profile that in any case must maintain a vertical position. Fastening occurs on the supporting profile. You need to leave a certain distance between them, at least 600 millimeters. Where the technological hole will be located, it is worth installing additional racks. It is better to provide a protrusion for the feet in the center.

The profile is installed in the shape of the letter P. It must be deepened under the bathtub, only 10 centimeters.

A moisture-resistant type of drywall is best suited for finishing the screen. The main thing is to maintain the width and height of the structure and make a small margin of 2 cm.

Self-tapping screws are used for fastening around the perimeter and in the center of the profile, and it is important to observe a step of 15 cm. It is important to monitor the screws; if handled carelessly, they can cause damage to the bathtub. It is recommended to step back 1 cm from the edge and the floor, then the drywall will not swell. This material is water resistant, but constant contact with moisture can be dangerous for it.

Tiles and film can be used to prime the finished surface. This is one of the last stages of work. Suitable and decorative plaster, many people prefer washable wallpaper.

Are there other options available?

Working with plasterboard partitions is very similar to what can and should be done with OSB and MDF. The only difference is that in the latter case, an additional window is needed inside the screen, which will be responsible for ventilation. The main thing is that it is located in the opposite direction from the place where the technical hole will be located.

Length – within 5-10 centimeters, width – about 2-3. A plastic grid will help cover everything. Both sides must be coated with MDF sheets with a primer. And this must be done before final fastening to the frame.

What installation features are worth knowing about?

The screen mount is easily mounted directly on the sides of the bathtub if it is acrylic. But this is unacceptable if you need to make everything for a cast iron bathtub. Otherwise enamel surface will spoil.

The complexity of installation usually depends on how complex the design of the screen itself is. Installation of a guide profile in the shape of the letter W is a mandatory requirement if you select a product with sliding doors. After this, you need to cut out the parts that will be the doors in the future. One door should be larger than the other. Only after this they are installed in the guide profile.

The fasteners for the screen for a cast iron bathtub are NOT mounted on the sides of the bathtub itself

What about drywall construction?

The first step is to assemble a frame that matches the dimensions we need. You can’t do without wooden blocks 40 by 40 millimeters, screws and metal corners.

1. The first important step is marking. A plumb line is used to mark the required number of points on the surface. They are then connected into single lines, usually extending to the floor from the corners of the bathtub. You should get two such lines.
2. You need to retreat 2.5 cm from each of the drawn lines. And draw one more parallel to the previous ones. But they will move inside the bathtub. Points for drawing lines on the floor are marked in approximately the same way, used. We get 4 lines.
3. The plumb line must be applied to the outer corner of the bathtub, which is not adjacent to them. After this, another point is placed on the floor. This is the top of a square whose side is 2.5 centimeters. It faces the inside of the bathtub.
4. Several lines will need to be drawn from the corner of the square facing the bathtub. They are connected to the lines that were described in point two.

• For the vertical sides of the square you will need four of them. The length will be equal to the distance from the floor to the bottom edge of the bathtub side.
• On the shorter side of the bathtub, two are needed for the frame.
• Finally, on one more long side you will need two pieces.
• Several slats in the vertical plane will be needed if the bathtub is long.

After this, you can finally move on to the frame itself.

1. Four short bars need to be connected to each other using metal corners. For DIY fastening, screws are required. Between the vertical slats it will be necessary to place parts with a horizontal position. Reverse order no actions are allowed.
2. You need to drill two holes in the rail that is attached to the wall
3. The frame should be on the wall, on the small side of the bath. Depending on the material from which the frame is made, suitable fasteners are selected.
4. The long frame is mounted in the same way. It is mounted on the second wall.
5. If additional vertical slats were prepared from the very beginning, then first they are attached to the frame, and then you can move on.
6. To connect both structures, you will need screws. The manufacture of the frame can be considered complete.

Installation of a curved frame

The general principle is approximately the same as described above. But it does not do without its nuances.

• Profiles for drywall - the basis for the manufacture of the frame; first you need to make cuts, only then give the necessary shape;
• There should be 2 of these curved profiles in total. They are secured using ordinary self-tapping screws. Next, you can move on to the vertical slats, they will strengthen the frame.
• It itself should be located at some recess from the side.
• Only after installing the frame does the installation of the screen itself begin with your own hands.

A little about sliding and removable options

Most often, acrylic bathtubs are equipped with removable screens. The latter are sometimes made of the same material and come complete, ready-made. Such products have an attractive appearance and are ideal for the bathtubs themselves. But they don’t allow you to fully use all the free space.

Choosing a plastic sliding screen for the bath

A design with external open shelves is one of the varieties of this model. Plastic is used for its manufacture; it is a convenient and practical option.

The material is also used in the production of finished structures. You can always choose an option that will have an end insert. The main thing is to purchase a model that clearly and accurately matches the dimensions of the bathtub. In any case, precise adjustment to the location will have to be made.

For blind structures the best material will become a brick. In the future, it is easy to make cladding for it. But in any case, it is important to provide for the presence of a technological opening so that there is always access to basic technological communications. The main thing is that even this detail does not stand out against the general background and fits into the existing interior. Other materials can be used, but this design is often quite complex.

A bath screen is a structure made from various materials and is used to hide communications. From a constructive point of view, there are several options for such protective panels, which allows you to choose the most suitable product for a specific interior. Screens allow you not only to protect pipes from moisture, but also to decorate a room, making it more functional and original.

Today, bath screens are classified into two main groups:

Solid;

sliding

Solid models are the most common and are characterized by simplicity. However, the simplicity of the design does not affect its effectiveness. The cladding of such a product, as a rule, is made with the same materials as the rest of the room (for example, tiles). Thanks to this, the panel fits organically into the interior of the bathroom.

Sliding models, in turn, are more functional. The design of such screens allows you to organize shelves under the bathroom for storing household chemicals and other household items. You can buy a screen for a sliding bathtub in any construction hypermarket or specialized store. It is also easy to choose and order the product you like via the Internet.

Advantages and disadvantages of solid models

Arranging a solid screen in the bathroom allows you to achieve harmony in the interior of the room. The cladding for such a screen can be very different, but most often they use decorative tiles or mosaic. Products lined with mosaics look the most aesthetically pleasing. Let's look at the advantages of solid models in more detail:

• this design has a long service life;
• Solid tile bath screens are easy to clean. To clean the dirt, just use a damp cloth or sponge.

However, such panels also have some disadvantages that are worth paying attention to:

• in some cases, the small dimensions of the viewing window are not enough to carry out repair work under the bath;
• inability to store household chemicals under the bathroom;
• If such a panel is available, replacing the bowl is accompanied by some difficulties, since the structure will have to be dismantled.

Note! To access the communications located under the bathtub bowl, it is necessary to install an inspection hatch of sufficient size. If there is such a hatch, there are no problems with repairing pipes, since dismantling the shielding is eliminated.

Thus, a continuous screen is great solution for the interior of the bathroom, but its use is associated with some inconveniences.

Bath screen sizes

Protective panels differ not only in their design, but also in size. There are both standard and non-standard screen models. Today, the minimum length of these products is 105 cm, and the maximum can reach 190 cm.

Let's look at the dimensions of the most common screens:

• length – 150, 170 cm;
• width – from 50 to 56 cm;
• thickness – 3 mm.

Less common model sizes are 160, 180 and 190 cm. Screening non-standard bathtubs is much more difficult, since it is not always possible to find a suitable product on sale. Bath screens 150 cm are the most common and are easy to install.

Solid panels are equipped with legs, which are necessary for adjusting or adjusting the product. Bath screens 170 cm are also standard and are used much more often than models whose length is 180 or 190 cm.

Screen design differences

The construction market offers many varieties of such panels to suit every taste. They differ in design and functionality. Many companies are engaged in the production of custom bath screens, which allows us to say with confidence that large selection these products.

Let's consider the types of such protective panels, depending on the design features:

• standard;
• multifunctional;
• end

Standard models are the most common and consist of a plastic panel for which a frame of appropriate dimensions is selected. The multifunctional version differs from the standard one in that it has the ability to adjust the size of the screen under the bath (due to the legs). End panels are used to hide only a certain part of the bathroom.

Helpful advice! Today you can find products equipped with various auxiliary elements that are necessary for convenience. Such products include panels with shelves, handles for people with limited mobility, as well as screens that include a hole for the legs.

Photos of screens for bathtubs can be easily found on the Internet, which greatly simplifies their selection.

Related article:

Types, advantages and disadvantages of sliding screens. Selection rules. Do-it-yourself assembly and installation of a sliding screen.

Features of plastic models

Plastic shielding options are the most popular today. They are distinguished by their attractive cost, as well as ease of installation and operation. The service life of such panels can reach 10 years (provided proper care after them). Plastic screens are resistant to moisture and do not rot over time.

The main advantage of panels made of this material is the variety of colors. This is due to the ease of production of products from polymers. The functionality of such screens may also differ. In specialized stores you can buy plastic screens for bathtubs with shelves, sliding, solid, removable, folding, etc.

If desired, you can perform shielding yourself. To do this, you will need inexpensive polymer lining. Such a panel does not require additional facing work, which has a positive effect on financial costs. To fix the plastic lining, it is necessary to mount a profile made of wood or metal.

The main disadvantage of plastic screens of any type is their poor resistance to mechanical stress (shocks). When installing a plastic solid screen yourself, you need to take care of organizing the door under the bathtub for quick access to hidden communications. You can make a special door yourself or purchase it in a store.

Acrylic bath screens

A popular type of protective panels, which is often sold complete with the acrylic bathtubs themselves. Such products are made from plastic material, which is subsequently treated with an acrylic layer. All of them are individually designed. Therefore, experts do not recommend buying acrylic models separately from bathtubs, since finding a suitable option is almost impossible.

Acrylic panels are only suitable for installation under bathtubs made of the same material. In most cases, such panels are solid, however, other varieties can be found on sale. If it is not possible to purchase a suitable screen for a specific bathtub purchased previously, it is recommended to buy a custom-made screen for the bathtub.

Note! Acrylic models have the same colors as the bathtub, which allows general design look organic.

One of the advantages can also be noted that such panels fit tightly to the sides of the bowl. The frame and fixing elements for fastening the panel are supplied to customers complete with the screen itself.

Screens made of MDF sheets and mirrors

MDF bath screen is most often used in classic design rooms, as they have a wood pattern. A wide range of colors and textures allows you to choose a product that will suit any interior. MDF shielding looks stylish and expensive, which often attracts buyers. However, when purchasing such a screen, you need to pay attention to two important points:

• products made from this material are only suitable for standard, rectangular bathtubs;
• MDF screens are made by compressing sawdust, so they are not resistant to moisture. In order to solve this problem, it is necessary to choose a moisture-resistant material that is equipped with a protective film.

The demand for mirrored models is quite simple to explain. Most modern bathrooms are small in size, and a mirror surface can visually increase the space of a room. Such panels also add play of light. They can be mounted at different angles, and also equipped with special lighting (for example, neon).

Anyway mirror screen looks very impressive. However, such panels are not without their drawbacks, including fragility and difficult maintenance. Drops of water and stains on a mirror surface are much more noticeable than on any other surface, so you will have to wipe them quite often.

You can make a screen from MDF with your own hands, which will be exactly the same as

Drywall bath screen

Panels that are made from plasterboard material are accessible and inexpensive. Organizing plasterboard shielding is quite simple with your own hands. In most cases, after installing a plasterboard screen, it is covered with ceramic tiles.

Important! To screen the space under the bathtub, it is necessary to use a moisture-resistant type of plasterboard sheet.

Let's look at the process of installing screens for plasterboard bathtubs:

1. First of all, you need to assemble the frame. The material for assembling the frame is timber with dimensions of 40x40 mm. At this stage, fixing elements and metal corners are installed.
2. Next, markings are applied to the walls and floor, which are needed for orientation during the installation process.
3. After applying the markings, the slats are installed along them. The slats are installed in both vertical and horizontal planes.
4. Next, the front panel is cut out of the plasterboard sheet, onto which hinged hinges or latches are installed.
5. The product is installed and an inspection hole is made in it.

Ceramic screens for bathrooms

Ceramic shielding allows you to organically decorate your plumbing unit. The main advantage of organizing a ceramic protective panel is that it looks as presentable as possible. Ceramic tiles are the main finishing material when organizing plasterboard screens, as well as tongue-and-groove slabs. Ceramic tiles are resistant to moisture, easy to clean, and also resistant to mechanical stress.

Installing a screen under a tile bathtub is quite simple. To carry out installation, you do not need to have special construction knowledge and skills.

• first you need to take measurements (width and height of the opening under the bathroom);
• styling ceramic tiles made from the upper left corner. Very important point is that installation must be done strictly horizontally;
• each individual tile element must be lubricated with tile adhesive;
• The alignment of a ceramic screen consisting of tiles is carried out using special crosses. Such crosses are inserted into the gaps between the tiles and form the same distance for all structural elements;
• Not only solid screens can be covered with tiles.

Bath curtain made of curtain fabric

There is no doubt that such a curtain is a non-standard solution. But she has several obvious advantages before hard materials. The main advantage of a bath screen is ease of manufacture and installation. To organize such a curtain you will need curtain fabric (300x60 cm), thread, needle, as well as scissors and a hot gun.

People who have a hard bath panel installed constantly touch it with their feet. Bathtubs with such panels are inconvenient to clean. Using a curtain solves this problem.

Note! This non-standard solution is only suitable for rooms with good ventilation, since the curtain is not able to protect the pipes from moist air.

Before purchasing a bathtub protection panel, you need to pay attention to the following points:

• Before purchasing a panel, it is recommended to take measurements of the bathroom and bowl;
• the choice of product design depends on two factors: the financial capabilities of the buyer and the dimensions of the bathroom. For example, it is not recommended to purchase folding screen models for bathrooms, the dimensions of which are standard. For small spaces, solid models are best;
• a model with doors allows you not only to protect communications, but also to organize a small storage area under the bathroom for household chemicals and other items;

• It is recommended to pay attention to the material from which the panel fittings are made. It is very important that the material has good resistance to corrosion;
• the panel must be freely adjustable, so you need to check the legs before purchasing the product;
• Aluminum is considered the optimal material for the panel frame;
• MDF bathroom screens are suitable for rooms equipped with good ventilation system. Otherwise, due to stagnation of moisture, this material can quickly become unusable.

The design of the panel is selected depending on the individual preferences of the apartment owners. Assembling a bath screen with your own hands will save you a lot of money.

Riho baths

How to make a bathtub screen with your own hands from plasterboard and tiles

Before the beginning self-assembly For a solid panel, you need to prepare the following tools and materials:

• drywall;
• building level;
• facing tiles;
• grout for facing tile joints;
• grinder, drill, screwdriver;
• special sealing compound.

Assembling a plasterboard panel is a common activity. This is due to the availability of the material, financial benefits and ease of execution of the shield. Moisture-resistant drywall, used for these purposes, has good flexibility, which makes it possible to produce a panel of non-standard shape.

How to make screens under the bathroom with your own hands? Let's consider the sequence of actions:

1. First the marking is done. Markings must be applied to the walls and floor, which will eliminate installation errors in the future.

1. At the second stage it is necessary to form frame structure for the panel. The frame can be made of wooden slats or metal profiles. To assemble the frame, you need a drill and a screwdriver.
2. After the frame is ready, it is necessary to sheathe it plasterboard sheets. For this, special self-tapping screws for drywall are used.
3. Next, you need to fill all the seams and joints in the resulting structure with a hermetic compound.
4. At this stage, the façade part of the plasterboard panel is treated with a primer.
5. At the end, the plasterboard panel is faced with ceramic tiles.

Helpful advice! Experts recommend treating frame elements with protective compounds. This is necessary to improve the moisture-resistant qualities of the structure.

Thus, assembling a panel for a plasterboard bathtub with your own hands is not difficult. And the finished screen will significantly improve the appearance of the bathroom. If necessary, you can buy bath screens in a specialized store or on the Internet.

Installation of a plastic or acrylic screen on a bathtub

As a rule, the panel comes with instructions, which must be studied before installing the screen under the bathtub. For designs that differ only in size, the assembly process will not be much different. The main differences in this case come down to the fact that the legs for panels for a high bathtub have an additional headroom (about 5 cm).

Let's take a step-by-step look at how to install a screen under a bathtub:

1. Before installing this structure, it is recommended to fill the bath with water.
2. It is necessary to install special handles on the outer panel of the screen, which are mounted for ease of use of the structure.
3. The legs of the product come separately. They must be inserted into the holes located on the bottom side of the screen.
4. Next, you need to place the panel under the side of the bathtub.
5. After this, the structure must be fixed using auxiliary components.

In some cases, the bathroom is distinguished by the fact that it has protruding communications or baseboards, the presence of which prevents the shield from completely covering the free space under the bathroom. How to install a screen under the bathtub in such a situation? It is best to measure the parameters of the protruding elements and make a corresponding hole in the screen. Then the screen will not bump into a protruding element of the plumbing unit. Of course, you can remodel a bathroom, but this more labor-intensive and expensive undertaking is not suitable for everyone.

How to install a screen on an acrylic bathtub?

To install the screen on an acrylic bathtub, you must adhere to the following work algorithm:

1. First of all, you need to make markings on the side and screen. The markings must correspond to the fixation points.
2. At the next stage, you need to place the shield against the bathtub at a certain angle of 30–40° and place its top between the side and the mount.
3. Next, the previously marked places on the side and the shield are drilled for screws.
4. At the end, the holes that must match are fixed with self-tapping screws.

Screens for acrylic bathtubs have good resistance to moisture and also have a long shelf life. Experts recommend that you carefully study the instructions before installing such a protective panel. The instructions describe all the necessary installation details.

Video of installing a screen on an acrylic bathtub