Tired of wallpaper or monotonous coloring - glue tiles to the ceiling. It's very simple and quick way change the interior of the room. Anyone, even a novice master, can do this kind of work. We will tell you how to glue correctly ceiling tiles.

The material from which this covering is made is polystyrene foam. It not only effectively blocks out extraneous noise from neighboring apartments and premises, but also serves as a heat shield. Polyfoam creates the effect of a thermos and significantly reduces heat loss.

Foam ceiling slabs are available in all sorts of patterns, so you can choose a material to suit every taste. The light weight of the tiles makes it possible to quickly complete installation work almost alone. However, it is worth noting that marking the ceiling is recommended to be done by two people.

There are even foam boards on sale that imitate coffered ceiling. Such ceilings can be seen in medieval castles and palaces. Installing an antique ceiling in your apartment or house is not difficult and does not require any special financial costs. Ceiling adhesive refers to budget option finishing, and do not require large financial investments.

After pasting the ceiling, foam boards can be painted acrylic paint For interior works. This allows you to create a glued ceiling that matches the tone, color and style of the wall and floor coverings. Ceiling tiles look finished when paired with foam ceiling plinths. Such slats often replicate gypsum stucco.

We calculate the material

Ceiling tiles have the following format or size - 0.3 x 0.3 m, 0.5 x 0.5 m. There are also various figured (carved) slabs, however, they also have a clearly designated area volume.

Before gluing the ceiling tiles, you need to calculate the quantity. To do this, you need to divide the total area of ​​the ceiling of the room by the area of ​​one tile. When performing installation work, cutting to size or even accidental destruction due to negligence is inevitable. To take into account all losses and accidental overspending, you need to add 10-15% to the resulting figure.

If you don’t know which tile you are going to choose, then you can use another option:

• Multiply the length and width of the room
• Add 10-15% to the resulting ceiling area
• Buy in store building materials only the area of ​​the ceiling tiles that is obtained after calculations

If the ceiling tiles are glued diagonally, the supply of material is calculated in exactly the same way.

In order to choose the right adhesive for ceiling tiles, you need to check with the store manager what kind of adhesive to glue the ceiling tiles with or read the instructions or certificate included. Usually such glue is always in the same place.

The consumption rate of the adhesive is indicated on its packaging. You need to buy glue in accordance with its consumption per 1 sq. m., no matter what size the ceiling tiles are. It is also worth thinking about the choice ceiling plinth, without which the ceiling will not be completed. Its quantity is equal to the perimeter of the ceiling of the room.

Important to remember! To compensate for the length of the plinth when trimming, add 3-5% to the total figure. Glue it with the same glue as ceiling tiles.

Installation

Before gluing ceiling tiles, it is necessary to level the existing ceiling. To do this, it is recommended to completely remove the old whitewash or water-based paint coating.

After this, the ceiling is carefully puttied, and all irregularities (differences, holes and cracks) are removed. When the putty dries, it is rubbed with sandpaper or an abrasive mesh until the surface becomes smooth and even. The prepared surface is primed with a deep penetration compound, such as CERESITE or the like.

After 3-4 hours the primer will dry and you can begin marking the ceiling. To do this, you need to determine the center of the ceiling. To do this, it is enough to draw diagonals of the existing ceiling. At the place of their intersections the center of the ceiling will be located. This point is also important when gluing ceiling tiles diagonally.

Mark the midpoints of opposite walls and pull the thread regardless of what types of ceiling tiles are being installed. Their intersection should pass through the center of the ceiling. If the walls are of different lengths, then make the appropriate adjustments. Draw center lines along the threads with a pencil. The ceiling tiles will then be oriented along them.

Glue is applied to the first tile in strips with a pitch of 15-20 mm. 5-10 mm retreat from the edge of the tile. This is necessary so that excess glue does not fall on the front surface. It has a delicate surface that may leave fingerprints.

Ceiling tiles or foam plastic are applied in any corner from the intersection of the center lines in the center, and pressed tightly over the entire surface. Excess ceiling tile adhesive around the edges is removed with a clean rag or sponge. The second tile is glued end to end with the first one in the second corner from the center of the ceiling. Hold it for about 1-2 minutes, then release it and move on to pasting the next slab.

It is important to know! Before gluing, it is necessary to remove any burrs from the edges of each plate.

If this is not done, then it will be very difficult to minimize joints. The ceiling slab is pasted over in a circle from the center. If necessary, trim. Cutting foam ceiling tiles is very easy. To do this, it is marked with a pencil and a ruler and cut off with a stationery knife. Cutting a hole for a chandelier from a ceiling tile is also not difficult.

After the entire ceiling is covered with tiles, you can fill the cracks. Now we glue the ceiling plinth. Gluing a foam plinth strip is not easy, but there are some secrets that will make the job easier.

In order not to press the liquid nails treated with glue or composition for 3-4 minutes, you can carefully nail it with a small nail to the wall in a layer of plaster. This is done at intervals of 0.5 m. When the glue has dried completely (18-24 hours), the nails are safely removed and the holes are filled with acrylic putty.

The joints of the ceiling plinth are also puttied. To get correct and beautiful joints of the plinth in the corners, it is cut in a miter box at an angle of 45 degrees. After puttying all the joints of the ceiling panels and baseboards, it is recommended to paint the entire surface with acrylic paint. Now such a ceiling is difficult to distinguish from real plaster stucco.

One of the most economical ways finishing the ceiling is gluing ceiling tiles. This process has a number of nuances, so it is important to study the basic rules for gluing tiles with your own hands, as well as methods for laying them.

Types of tiles

All models of ceiling tiles differ in their density, texture, and composition. Let's look at the main types.

Plastic

Plastic tiles is quite durable and high quality, but it is far from environmentally friendly. This ceiling is easy to care for: the plastic can be washed and cleaned different ways. It has the ability to fade, so this material is not suitable for rooms flooded with sun.

Extruded

This material has a smooth surface without particularly convex relief elements. As a rule, extruded boards have a thickness of no more than 3 mm, although the material is dense. Manufacturers present models different color. Some of them imitate marble and wood.

It is not customary to paint extruded tiles, because the paint does not adhere well to the surface. The stores offer a wide selection of models with different patterns in different colors y decisions. Extruded tiles are made from expanded polystyrene. She is easy to care for. It does not create difficulties during the gluing process.

The only drawback of extruded tiles is their high price.

Foam

In another way it is called stamped or PVC. Its composition is more loose. The surface of such tiles is grainy and porous.

Presence on the surface large quantity pores makes it difficult to care for foam tiles. They become clogged with dirt and the color of the tiles fades. To avoid this problem, such material is often coated with paint. But water-based compositions unsuitable. It is advisable to use acrylic dispersion paints to paint such ceiling tiles.

The thickness of each plate ranges from 6 to 8 mm, depending on the specific model. The pattern on it is extruded using large press technology. This tile has a huge drawback: it is loose, breaks quickly, deteriorates, is translucent. It is difficult to trim it. Therefore, such models should be purchased with a reserve. Big advantage foam tiles is low cost.

Injection

These varieties are made from polystyrene foam, which is baked in a certain shape, creating the desired pattern on the surface. The drawings are clearer than those of previous analogues, the texture is more interesting. This material has average cost and quality. Manufacturers allow this material to be painted. With the help of such tiles you can make a completely seamless ceiling, which is why it is in demand.

The big advantage of this composition is its fire resistance and environmental friendliness. This material has good sound insulation and does not deteriorate from high humidity. However, it is always produced in white, so it is often painted with different compositions after installation.

Most types of ceiling tiles are produced in squares of 50 by 50 cm. But there are also non-standard tile models rectangular shape.

By edge type

Exist different types ceiling tiles, which differ in the type of edging. There are models:

• with straight edges without seam;
• having clear boundaries between each slab;
• with curved edges that look more interesting.

A different type of edge does not affect the gluing of ceiling tiles, it only changes the appearance of the ceiling.

According to the drawing

Models are divided by type of pattern. Eat interesting views tiles with:

• geometric print;
• floral ornament;
• lace motifs;
• imitation of gypsum stucco;
• laconic lines.

A neutral option is smooth tiles without a pattern. From the wide selection presented by modern manufacturers for sale, you can choose an option for finishing the ceiling to suit every taste and budget.

Surface preparation

Before gluing the tiles, it is necessary to carefully prepare the ceiling surface. In order for the result of the work to please you, and for the tiles to stay on the ceiling for a long time, you must follow a number of rules. The ceiling must be cleaned of old coatings. The whitewashed ceiling should be thoroughly washed off, the plastered layer, wallpaper and paint should be peeled off and removed. Depending on the type of coating, you can use a spatula or a punch for this.

Then it is necessary to correct the defects that remain on the cleaned ceiling. More often, cracks, bulges and depressions appear on it. In order to fix uneven ceiling, putty should be used. Using this composition you can grout defects. Putty can correct defects of any complexity.

After the putty has dried (after about 12 hours), you need to start priming the ceiling. It is better to apply the primer in several layers, observing a certain time interval so that each layer dries completely. The primer will improve the adhesion of the tiles to the ceiling surface and make this coating more reliable.. It will make the overlap uniform due to its penetrating ability.

An exceptional option for surface preparation is when the whitewash is in good condition and adheres securely to the ceiling. In this case, the ceiling is not cleaned of whitewash, but is immediately primed. However, it is worth considering: on such a basis, the tiled covering will not be able to last long; over time, it will come off and may become deformed. This solution should only be resorted to if you need urgent cosmetic repairs.

Surface preparation with a primer varies depending on the type of ceiling:

• For concrete ceilings, a special composition called concrete contact should be used.
• It is better to treat a gypsum ceiling with a deep penetration agent.
• If the room is damp, it is worth treating the surface of the base with a primer with an antiseptic effect to prevent the creation of an environment for microorganisms.

If the ceiling is loose and loose, it must be primed. After the preparatory composition has been absorbed, you can proceed to gluing the tiles.

Glue selection

Usually used for gluing standard types glue (“Titanium”, “Moment” or “Naset”). These formulations are quite common and have an average cost. However, some of them create difficulties during the gluing process. For example, after applying the adhesive, the tile must be pressed against the ceiling for 5 - 10 seconds and held completely.

The fastest-acting of these compounds is Moment glue.. It sets in about 3 seconds. Before gluing ceiling tiles with it, it is necessary to keep the composition in the air for a certain time. After this, the fragment should be firmly pressed to the base. Ceiling tiles are often glued with liquid nails. They are able to fix coatings well and are also used for the reconstruction of ceilings.

For gluing ceiling tiles special mastic is often used. It is sold in buckets and has a pasty texture. This glue is much easier to use because it is flexible: each element of the coating is immediately fixed to the ceiling and does not need to be held for a long time. Mastic and tile adhesive are used only for ceilings with a flat surface.

If there are defects or unevenness on the ceiling, gypsum-based putty is used for pasting. Besides her You can stick coatings onto uneven ceilings using a compound called Knauf. It is suitable for height differences of 5 mm. For large defects, the ceiling should initially be leveled.

Pasting schemes

There are several common options for laying tiles on the ceiling.

Classic scheme

It involves placing tiles in rows close to each other along the walls. Gluing begins from the central part. This solution is resorted to if seamless ceiling tiles are used. By gluing tiles according to the classic pattern, you can create a complete surface.

Classic styling also has a second interpretation. During the gluing process, the tiles are laid with a shift so that each row is half a slab ahead of the previous one. This makes the ceilings lighter and airier.

It is better to choose types of gluing depending on the height of the ceiling in a particular room.

Diagonally (obliquely)

This is the most common option; it is universal because it is suitable for any size room. To lay tiles in this way, mark them along diagonal lines in advance so that the tiles run along them. However gluing diagonally involves a large consumption of finishing material. You will be left with a lot of scraps.

Visually, placing tiles diagonally (rhombus) looks more presentable. The seams with this installation are practically invisible. Placing tiles diagonally must begin from the chandelier. It is important to control the correct installation so that all slabs follow strict lines.

Diagonals can be drawn using threads, making markings with their help.

There are a number of rules that must be followed in order to properly tile the ceiling diagonally:

• The first element must be positioned so that it is at an angle of 45 degrees from each wall of the room.
• Then the following tile elements must be attached closely to the central element.
• After this, all subsequent elements should be smoothly joined until the entire surface of the ceiling is covered with tiles.

If you follow these rules, you can create an elegant and interesting styling.

Checkerboard

To finish the ceiling in this way, you need to purchase materials from two different shades. Usually contrasting ones are chosen color solutions. The gluing occurs from the center of the ceiling. In this case, the edges of the tiles are placed parallel to the side walls. Gluing occurs using the alternating method. This creates a checkerboard effect on the ceiling.

The advantage of this type of gluing is the fact that it is able to hide the unevenness of the base.

Snake laying

This styling scheme is a combination of two shades. Colors can be contrasting or similar. Gluing is done starting from the center of the room so that the image of a graphic type snake is obtained. Usually they try to simplify this process by purchasing plain tiles, and only then coloring them after installation. water-based paint in different colors.

Calculation of the quantity of materials

Calculating the amount of material that will be spent on finishing the ceiling is quite simple. It is necessary to find out the surface area of ​​the ceiling. If the room is rectangular in shape, you can multiply the length by the width of the room by measuring the walls with a tape measure. When a room has non-standard shapes, you have to take measurements of all the walls separately.

It is advisable to display them on the plan in the form of a drawing. After this, the resulting drawing must be divided into rectangles and squares and the area of ​​each figure must be calculated to scale. Then you need to add up the area sizes of all the resulting elements. This way you will find out the surface area of ​​the entire ceiling in a non-standard room.

If you chose standard tiles measuring 50 x 50 cm for finishing, the area of ​​such a product will be 1/4 square. m. Accordingly, four tiles will cover 1 square. m. ceiling. To simplify calculations, you can divide the total ceiling area by the area of ​​the ceiling tiles. As a result, you will receive the amount of material needed for gluing.

Now manufacturers present models whose sizes vary: 40 x 40, 60 x 60, 30 x 70 cm and 30 x 60 cm. For calculations in in this case you need to approach it more seriously when calculating the area of ​​the tiles to purchase the required number of packages. Even after making calculations, tiles must be purchased with a reserve, so that it is enough to cover the entire ceiling and trim. This is especially true when you plan to place it not according to the classical scheme.

Do not forget that during the gluing process it may break or deteriorate. You need to buy about 10% more tiles than you calculated.

Pasting process

It's easiest to paste over smooth ceilings. Foam or polystyrene tiles are perfect for this type of surface. First you need to spread the glue onto the surface of the tile. It is necessary to follow a certain technology: glue is applied along the perimeter of the tile and diagonally. The entire surface of the tile should not be covered with glue.

Before gluing, markings are drawn to make it easier to place the tiles on the ceiling. Then the tile must be placed in the space allocated for it. Having applied the tile, you need to smooth it over the entire surface with light hand movements. Then you need to wait a few seconds. The exact time depends on the type of adhesive chosen.

Despite the emergence of new, more modern materials, polystyrene tiles have remained popular and in demand for ceiling finishing for many years. This a good option for creating beautiful interior premises at minimal cost.

Ceiling tiles - what are they?

These are polystyrene foam boards of square or rectangular shape. Ceilings decorated with this material are called “glued”, “glued”, “glued” (you can see the photo in our article). Their front side may be laminated or not have any coating, embossed or smooth, have a wood structure or imitate stone, fabric, wood carving or stucco.

What types of tiles are there?

There are three types of this material:

• injection tiles;
• extruded;
• pressed.

Injection tiles are produced by sintering and casting polystyrene foam raw materials in special molds.

Extruded samples are pressed from extruded strip. It can be covered with film or painted.

Pressed tiles are made by stamping.

Advantages and disadvantages of the material

The advantages of polystyrene tiles include, first of all, their environmental friendliness. It also features good sound insulation and thermal insulation characteristics. Quite easy to install - easy to cut and easy to install.

The material is not flammable, melts only at temperatures above +80 degrees. The slabs can be glued close to heating pipes. But lamps and fixtures should be located no closer than 30 cm from the ceiling. A definite advantage is the very affordable price.

Experts and buyers consider the disadvantages of such ceilings to be their fragility - over time they begin to turn yellow from sunlight. In addition, it is rarely possible to achieve the effect of a homogeneous surface due to the many joints.

How to glue ceiling tiles

First you need to start preparing the surface of the ceiling and the tiles themselves. This material is not capricious, but it reacts to changes in humidity and temperature. Therefore, when you bring the tile home, do not rush to unpack it, let it “sit down” for a while. room temperature during few hours. This way you will protect it from deformation after installation.

Preparing the ceiling

You can often hear questions: “How to properly glue ceiling tiles? Is preliminary surface preparation necessary? Such preparation is necessary. Whitewash, old tiles, wallpaper should be removed. There should be no peeling areas on the surface. It should be completely clean, smooth and dry. Putty will be required for small surface differences. The tile will hide small potholes, so additional treatment of these areas will not be required. But a primer never hurts.

How many tiles do you need?

To find out, you need to make a scale drawing of the ceiling you are going to finish. Then try to “place” the tiles on it. Add 10-15% of the material to the resulting amount in case of breakage or deformation.

Marking the surface

How to glue ceiling tiles so that the surface is even and smooth? There are several methods for decorating the ceiling. Tiles can be glued at an angle, although it is more convenient to lay them parallel to the walls or diagonally.

It is more advisable to start installing tiles from the center of the ceiling. To do this, you need to determine this point. Pull two cords from one corner of the ceiling to the other diagonally. Draw two perpendicular lines through the center point. It is important that the very first rows lie perfectly evenly - the appearance of your future ceiling depends on this.

How to choose glue

What is the best way to glue ceiling tiles? The question is serious. From the right choice The quality of work largely depends on the adhesive composition. Most often, “Moment”, “Titan”, “Eco-naset” are used for this. “Titan” and “Eco-naset” have good adhesive properties, but they take a long time to set. Compared to them, Moment glue has a clear advantage - it sets in seconds, holds the material for a long time and reliably. But along with this he has significant drawback- more of it is consumed, and it costs more. In addition, you will need a special gun to use it.

Start of installation

How to glue ceiling tiles with your own hands? A question that interests many. Therefore, today we will try to dwell on it in as much detail as possible.

Since the material weighs little, the adhesive can be applied pointwise to the tiles. Usually the places where it should be located are indicated in the instructions. Often, beginners in this business have difficulty adjusting the pattern. This happens due to discrepancies in tile sizes that are not noticeable at first glance. Craftsmen know this secret, but what if we glue ceiling tiles with our own hands?

To prevent the design from shifting, take a tile that is not smeared with glue and attach it to one that has already been glued. If the size matches, work can continue. The first tile is glued so that one of its corners is located exactly at the central point (later the 4 central tiles will connect here). If there is a chandelier in this place, then the corners must be cut according to the markings. In the future, this place will be covered with a rosette and will become completely invisible.

Align the edges of the tiles along the marked lines. The tiles must be pressed against the ceiling, but not too hard so as not to leave dents. The following tiles are glued parallel to the previous ones, without gaps. If excess glue is squeezed out of the seams, they must be removed immediately with a damp cloth or sponge. The tiles for the last rows are cut to the right size, it is tried on in place and only then glue is applied to it. The gap will be closed with a ceiling plinth.

How to glue ceiling tiles with a diamond shape? This means that the tiles will be glued diagonally in relation to the walls, and therefore they will be perceived as diamonds. This method looks quite impressive. However, this method will entail greater consumption of material, since the tiles near the walls will be laid out in triangles or incomplete slabs.

Covering the cracks

How to glue ceiling tiles so that the covering is one piece? The gaps between the tiles (seams) must be filled with sealant. It is resistant to moisture. After filling the seams, they should be carefully smoothed with a trowel. Remove excess with a damp sponge.

Final touches

All that remains is to glue the ceiling rosette, having previously cut a hole in it for the chandelier. After completing work in the room, close the windows and doors to stop air movement.

What is seamless tile

This is the result of fruitful cooperation between technologists and chemists. This tile has a significant advantage - after gluing there are absolutely no seams on the ceiling. This excellent result is achieved in different ways.

What are seamless tiles? It is available in the following types:

• with decorative filling;
• with a figured edge;
• with calibrated edge.

Tile with decorative fill is a material with a decorative pattern applied to it, usually abstract.

Tiles with a figured edge have various figured cutouts, thanks to which the individual elements are connected to each other. A wavy or zigzag connection remains almost invisible on the ceiling.

Tiles with calibrated edges are made using a special technology, where the evenness of the sides and the straightness of the corners are maintained with an accuracy of millimeter and degree.

How to glue seamless ceiling tiles? It is in vain that anyone thinks that in order to avoid visible seams on the ceiling, it is enough to buy a tile with such a promising name and stick it on the ceiling. In fact, there are some secrets, knowing which you can achieve High Quality by doing this work yourself.

Surface preparation for seamless tiles is traditional: the ceiling must be smooth, clean and primed. Despite the fact that the seams on the tiles are not visible, it is necessary to carry out the initial markings. To do this, you need to find the center of the ceiling (you already know how to do this). Then apply the markings. This will help you perform installation quickly and accurately.

Seamless tiles are glued using time-tested “Dragon” glue or another glue recommended by the manufacturer. Work begins from the center of the room. The tile is coated with glue along the edges and in the center. After this, it is applied to the ceiling and held for 3 minutes. When the ceiling is pasted over, you can start gluing the baguettes that are sold along with the tiles. In the corners they are cut at an angle of 45 degrees. A hole is cut for the chandelier.

As you can see, the work is not too different from gluing ordinary tiles. The only difficulty is that you have to stand for a long time with your arms raised up. To make the task a little easier, take someone as an assistant.

How to care for a tile ceiling

Non-laminated tiles (without coating) can only be wiped with a dry cloth or carefully vacuumed. Oily stains This surface can be washed off with alcohol.

Today you learned how to glue ceiling tiles (you can see the photo in our article). This work is not difficult, but requires accuracy. By following all the rules, you can get an excellent result that you and your loved ones will be satisfied with.

Despite the wide variety finishing materials ceiling tiles are still popular. Such love on the part of modern consumers is ensured by the affordable cost, as well as the ease of installation of this ceiling covering, which I would like to talk about in more detail in this article.

How to glue ceiling tiles, what materials may be needed, how long it will take to complete the work - these are the questions that most often concern those who want to cope with gluing on our own.

Deciding on tiles

In this matter, you should be guided solely by your taste preferences. Indeed, with the help of seemingly simple ceiling tiles, you can achieve any desired effect. Laminated tiles are extremely popular. It has a denser texture, a glossy surface, and can also be cleaned and washed, which every housewife will appreciate. With the help of such tiles you can decorate the ceiling not only in the room, but also in the kitchen and even in the bathroom.

Moreover, modern manufacturers offer a wide color palette tiles, so everyone can find for themselves the option that matches their idea. If you want to emphasize your own individuality, then before gluing the tiles to the ceiling, be sure to take the opportunity to paint the tiles with water-based paint. She gives whole line undeniable advantages: firstly, you get the shade that you need, and secondly, you develop your creative abilities.

Apply glue

Now, as for the physical characteristics of the tile itself. Be sure to pay attention during the selection process Special attention at the corners, they should be exactly 90 degrees. Only in this case will you be able to carry out installation work quickly and efficiently. Moreover, none of the corners should be jammed. That is why, during the purchasing process, check each package of tiles to avoid unpleasant consequences.

If you decide on a polystyrene tile with large grains, then make sure that its edges do not fray or break off, otherwise the process of working with such material will turn into real torture for you. Remember that the material is fragile and be careful when transporting it.

And, of course, if there is a pattern on the surface of the tile, it must be clear, otherwise this seemingly small flaw on the overall canvas will attract attention and be conspicuous.

Spread the adhesive over the tiles

Preparatory work

Before you start gluing ceiling tiles, you should carefully. To do this, you need to remove the old coating. If it is whitewash, then you will have to wash off all the layers. The fact is that the result of the work associated with transforming your room largely depends on how thoroughly you remove the whitewash from your ceiling.

Before gluing ceiling tiles to a cleaned surface, take care of the soil. can be purchased at any specialty store. Using an ordinary paint roller and its extension, it is recommended to cover the ceiling with several layers of primer.

If washing off whitewash is very tedious for you, then you can use a construction product. With its help, you will have to scrape off the whitewash layer, and then also go through a layer of primer.

Ceiling markings

At this stage of work, it is necessary to clearly determine how the tiles will be located on your ceiling. In fact, today there are many ways and variations of gluing polystyrene tiles. However, the simplest is to install the tiles parallel to the walls; less often, the tiles are placed diagonally.

If you cannot decide how to glue the ceiling tiles, then choose the easiest method. Your starting point should be the center of the ceiling. This is usually where the chandelier is installed. Moreover, special importance should be given to the first rows, since the entire result of the work you perform depends on how even they are.

You can start fixing the tiles from the center

Apply glue to the tiles

How to glue tiles to the ceiling? Of course, using construction glue. Today, consumers are offered a sufficient range of adhesive compositions. It is advisable to use special adhesive for polyurethane foam tiles. It will not only ensure reliable fixation of the coating on the ceiling, but will also not damage the texture of the tiles, which quite often happens when using, say, “liquid nails” wide range applications.

So, it is recommended to apply the glue pointwise and let it sit for 5-7 minutes before laying. During the installation process, it is important to pay special attention to the edges of the tiles. Considering that the material from which it is made is quite fragile, the edges may look very careless and crumble, which will certainly affect the appearance finished surface.

The first tile must be glued so that one of its corners is at the central point of your ceiling, which you managed to determine using the correct markings. And one more thing: it is important to press the tiles firmly against the ceiling, but this should be done very carefully to prevent the formation of dents on its surface. All subsequent tiles must be glued parallel, trying to leave a minimum gap. If excess adhesive is formed during the gluing process, it should be immediately removed from the surface of the tile.

You can install tiles diagonally

We eliminate existing cracks

If until today you didn’t know how to glue ceiling tiles with your own hands, then you probably didn’t even think about the possibility of cracks forming. Yes, indeed, this happens, especially with beginners.

If you don’t want to face this problem, then purchase seamless tiles that create a perfectly flat and smooth surface. Although we must admit that this type of polyurethane foam tile is quite expensive.

So, as for the cracks that have formed, you can get rid of them using construction sealant. It is advisable to use silicone sealant, as it is resistant to moisture and temperature changes.

Final touches

So, now you know everything about how to stick tiles on the ceiling. All that needs to be done is to remove all excess glue and cut a hole for the ceiling chandelier using a construction knife. In this case, remember that it is not at all necessary to cut the hole with extreme precision and extreme care, because it will be covered with an overlay. This hole is primarily intended for releasing wires, so it should be quite small in size.

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

People who are renovating an apartment have a question about how to decorate the ceiling. The most affordable and cheap material, this is a ceiling tile made of polystyrene foam, it is attached to any base and does not weigh down the ceiling. Although the work seems simple, finishing the ceiling requires experience and knowledge in material laying techniques.

When making repairs, first of all, choose and purchase quality material . Quality indicator – good condition, correct sizes and clear drawing.

• Quality of material. You can check the quality of the material by taking the panel by the corner and shaking it lightly. If it does not break or deform, then the material is suitable. Each panel should be identical in size with strong edges and a dense surface.
• Correct form. Tiles with straight and even edges fit correctly on the ceiling, creating a perfect finish. The angle of each panel corresponds to 90 degrees, rectangular or square.
• High quality drawing. The pattern on the panel should be clear and even with the correct relief.

Types of tiles

Ceiling tiles are available in several types and differs in the production method(pressed, extruded and injection).

Using ceiling tiles on walls

A wide range of ceiling tiles made from polystyrene allows you to use them on the ceiling and walls. Different in shape and texture, imitating wood, metal or stone the tile will become spectacular decoration, for example, at the head of the bed. There are several options for using the material on walls, as a simple sticker, as an additional decoration or to create a canopy effect.

• Pasting in a simple way. Pasting material with a pattern at the head of the bed in this way will look interesting. Laminated, white or colored tiles will decorate any bedroom, highlighting the focal area of ​​the room. To visually reduce a wall in large bedroom, it is laid out across the width of the head of the bed and the height to the ceiling. To small room it was not visually broken into parts; panels decorate the entire wall. When using a seamless material, it appears that the wall panel is solid.
• Additional decoration. Painting the tiles will give the wall the texture and desired shade. For this purpose, paints in pearlescent shades or containing glitter are suitable. Paints that imitate wood, stone, and silk will also look impressive. The combination of panels of different sizes and textures will create a complex pattern similar to a panel. A section of wall with tiles will look solid if you make a decorative frame around it.

Not everyone likes to use polystyrene material in their bedroom. This decor is created from material made made of plaster or polyurethane. The disadvantage of this type of finishing is the complexity of the work and high cost.

Ceiling tiles - how to glue in different ways, photo

To work you will need a level, a tape measure, a simple pencil, a construction knife and a painting cord. First, prepare the surface for work. The ceiling is completely cleaned and leveled. If the base is covered with plywood or chipboard, then they are carefully primed. The panels are glued onto a flat, dry, grease-free surface of the ceiling.

How to glue ceiling tiles? There are several gluing options: parallel, diamond or diagonal. Parallel and diagonal masonry are the most common. You can create various installation combinations using plain or colored tiles: snake, intersecting and alternating lines, checkerboard, around the perimeter of the ceiling.

Parallel to the wall

Some apartment owners use the parallel installation method, as it is easier to do. To prevent the remaining gaps between the wall and the panels from being noticeable, start gluing from the wall opposite the window or door.

Diagonally

When starting work, the first thing to do is mark the ceiling.

• To do this, pull two threads from the corners of the room. The point where the threads intersect is the center of the ceiling; installation begins from here. If a chandelier is located at this point, then the corners at the joints of the ceiling panels are cut off, and the figured glass from the chandelier will cover these places.
• The glue is applied to four panels at once and allowed to dry. After this, take one element and apply it at an angle to the center of the ceiling. Then the remaining three panels are glued on, creating a central square. Glue is applied to the remaining parts and glued side by side.
• If the panels on the ceiling lie unevenly, they are trimmed with a construction knife. The cut element is applied cut side to the wall. It will not be noticeable when covered with the ceiling plinth.

How to glue ceiling tiles with a diamond pattern

By laying out the panels in a diamond pattern, more material is consumed. The material is glued in a diamond shape according to a special pattern. On the ceiling, from the central point, mark squares. Then mark diagonal lines in each square. The panels are glued by adjusting the angle to the central point of the ceiling, with its sides corresponding to the drawn diagonal lines.

How to properly glue a ceiling

Can I use ceiling tiles in the bathroom?

Doing major renovation in the bathroom, the question arises what material can be used to decorate the ceiling. If you use bathroom ceiling tiles, the room will look rich and original, and the tiles on the ceiling in the bathroom will be in perfect harmony with the tiled walls. The most reliable tile is extruded. It is available in different colors and patterns, suitable for any interior. Panels covered with film can be washed; other types can be cleaned with a vacuum cleaner or wiped with a dry cloth.

How to glue ceiling tiles