Plumbing manufacturers present a huge number of bathroom fixtures that keep up with technical innovations and can please modern external design. How to choose a heated towel rail from all the abundance of assortments, they will help simple recommendations. It is important to consider not only appearance, but the pros and cons of a particular product.
Classification of towel dryers
Drying devices are classified according to several criteria. These include the type of heating, material of production, structural and design features.
The first thing you need to pay attention to is the type of heating. Based on this we can highlight:
- Water heated towel rail;
- Electric model;
- Combined products.
Let us analyze in detail each device, its method of operation, advantages and disadvantages.
The water device works thanks to the source hot water in the house. This could be autonomous heating or another source of hot water supply.
Clean drinking water flows through the equipment. This reduces the risk of corrosion, but does not eliminate it completely. Therefore, you should choose the most durable material for negative impacts water.
The disadvantage of a water heated towel rail is the lack of hot water in summer time. Because of this, operation of the device in the warm season is impossible. Is it from autonomous heating, which will have to be constantly maintained.
Installation of the structure includes fastening with nuts to the hot water system. For waterproofing, it is recommended to use gaskets made of different materials. Gaskets must be replaced periodically to avoid leakage.
Important! It is best to choose heated towel rails from of stainless steel with release valve. This will prevent starting problems after turning off the hot water.
Electric heated towel rails operate on an electrical system. This heated towel rail can be hung in any convenient room and used only when necessary.
The dryer doesn't draw much electricity. Its operation is equivalent to using a 100 W light bulb.
A clear advantage of the device is the heating temperature. It is a maximum of 60 degrees, so the equipment is safe.
The dryer operates thanks to a heating cable or built-in heating element.
Electrical products are divided into two groups:
- "Dry." Inside there is a cable that is more secure than a tubular electric heater.
- Oily. They have high heat capacity. After disconnecting from the electrical system, they continue to retain heat.
You can install a heated towel rail in an inconspicuous way: the cable is connected to the junction box and hidden in the wall. Such installation is only possible with autonomous control.
The equipment is powered from a regular outlet
Using a special box or remote control, the system is turned off and the temperature is adjusted. I am pleased with the security system of such equipment. If problems occur, the dryer turns off. This will also protect against overheating.
The device can also be connected to a regular outlet.
The power of the dryer ranges from 25 to 1200 W.
Important! The distance between the electrical appliance and the water pipes should be at least 600 mm.
In some cases, this type of heated towel rail can replace a radiator and heat the room.
The combined type can operate from both heating sources. If necessary, you can switch the dryer to a convenient mode. If there is a problem with turning off hot water, you can operate the equipment via electricity.
The device circuit includes:
- Water part;
- Electrical pipe;
- Hot water connection;
- Cord for connecting to the electrical network.
It is also worth noting the rotating properties of heated towel rails. This function allows you to rotate the device 180 degrees from the wall. The most popular are chrome-plated swivel heated towel rails.
Chromed metal matches almost any interior. Rotary structures are found in every type of dryer.
Based on a detailed analysis of each type of device, you can decide which heated towel rail is best to choose.
Features of the water model
Let's take a closer look at which water heated towel rail is best to choose for the bathroom. In this case, it is important to take into account not only the operating principle, but also other features of the dryer.
The nuances of choice can safely include the appearance of the product. The most popular models:
- In the shape of the letter "M";
- In the shape of the letter "P";
- Zigzag;
- Ladder.
Manufacturers continue to surprise customers with a variety of shapes, so you can come across completely unusual designs.
The number of pipes will allow each family member to dry a towel. In addition, the distance between the pipes will allow you to hang several wet towels at once. Other appliances may surprise you with protruding shelves.
Consider the material from which the equipment is made. Constant contact with water determines its characteristics.
Iron products are the cheapest and inferior in quality to other materials. The best option- stainless steel. This material will withstand required pressure and resistant to corrosion.
For private homes, brass or copper is suitable. They can withstand medium pressure. When choosing steel, prepare for rapid corrosion of the metal. If the pipes are completely filled with liquid, then there is a chance to extend the life of the product. Otherwise, oxidation begins.
Important! Pipe joints must be made of the same material, otherwise corrosion will occur at the joints.
From the above, we can summarize how to choose a heated towel rail for a water-type bathroom:
- Options in the standard form of letters will be economical. They fit perfectly into a small room and do not take up much space. In addition, installation of such installations is much simpler.
- For a large bathroom, products with wide stainless steel pipes are suitable. For example, radiator dryers must be connected to heating system.
- Consider pressure and corrosion when selecting product material.
- If you are not confident in your abilities during installation, then it is better not to take risks. A specialist will protect you from the negative consequences of inept installation.
It will be absolutely safe to install such a model in a bathtub.
Nuances of the functioning of electric models
When determining which heated towel rail to choose, you should pay attention to electrical appliance. Electric models have undeniable advantages:
- Attractive design;
- Elimination of leaks;
- No need to worry about pressure;
- Easy installation;
- Possibility of installation anywhere in the apartment;
- Possibility to regulate the operation of the device.
The danger of using an electric towel dryer can arise if the humidity in the bathroom is high. To eliminate the possibility of electric shock, seek the help of a specialist. He will be able to mount the device most securely, with the wires hidden.
Important! Buy and order installation of a heated towel rail from one company. This will eliminate the problem of returning equipment in case of malfunction. Otherwise, the company may blame the breakdown on violations of installation rules.
There are two types of devices: with a cable and a pipe filled with water or oil.
What you should pay attention to when choosing an electric heated towel rail:
- Price. Equipment with a cable will be cheaper due to the lack of a closed loop.
- A device with water or oil can heat entire rooms. Cable dryers have less power. They are only enough to dry towels.
- Installation. Cable products can be installed in any form. Liquid devices are limited in this right.
- Dryers with cords heat up faster.
- Adjustment of functions. Most often, the thermostat is found in equipment with liquid, otherwise it can heat up to very high temperatures.
Are imported manufacturers a guarantor of quality?
An important aspect of choice is the manufacturer. Imported models have stylish design and a wide range of choice. This is what makes them attractive to consumers. But choosing an imported heated towel rail has several pitfalls.
European models are connected to a heating system, for which the water undergoes special treatment. Therefore, the product is not accustomed to pressure changes and corrosion. But some models take these features into account and can please the client with durability.
When choosing an imported product, check the equipment for shut-off valves. They will help reduce pressure in the pipes.
When deciding which company to choose a heated towel rail, pay attention to the following manufacturers:
- Zehnder is a device from Germany. Presents products of different functionality. The company offers painted heated towel rails in any color; it can be chrome-plated or enameled.
- Margaroli - Italian towel rails. They are striking in appearance and will appeal to aesthetes. The material of manufacture is brass with different coatings.
- Warmos is a Finnish device. The safest option.
- Arbonia is a German manufacturer. Quality and interesting design in one device.
- Gorenje - simplicity and accessibility.
- Vogel&Noot - made in Australia. A wide range of devices undergo several levels of quality control.
A Russian manufacturer is also represented on the market. Companies such as Tera, Trugor, Dvin, Terminus have managed to prove themselves from the best side.
Which heated towel rail is better to choose?
The material of manufacture needs to be given Special attention when choosing a dryer, because it determines which heated towel rail is better. The material must withstand the required pressure and be resistant to corrosion. Let's consider all the options for dryers:
- Stainless steel. It is important that a seamless pipe is used in manufacturing. This guarantees resistance to pressure changes. The downside is the heaviness. The wall thickness of the stainless steel pipe must be at least 3 mm - this guarantees the quality of the product.
- "Black" steel. It is not resistant to corrosion. Suitable only for autonomous heating systems. Low quality determines low cost.
- Copper. They are resistant to corrosion, heat up quickly and give off heat, are lightweight, and do not cause difficulties during installation. At central heating Please ensure that the outer walls of the pipes are galvanized.
- Brass. Conducts heat well and is resistant to corrosion. Internal chrome plating will extend the service life. The downside is that they can’t always bear the pressure.
We can conclude that when choosing a material, not only its properties are important, but also the presence protective coatings, wall thickness, painting. It is necessary to take into account the heating features of the apartment and rely on available funds.
When fully equipping a bathroom, the question may arise about how to choose the right heated towel rail. You need to pay attention to the type, material of manufacture, apartment features, price parameters and your own needs.
High-quality equipment that will last a long time cannot be cheap. If you wish, you can buy a good one a budget option, having previously familiarized yourself with all the pros and cons different types and materials.
A heated towel rail is a necessary attribute of every bathroom. It is designed for drying towels and other bath items, as well as for combating dampness and heating the room. In addition, this item, correctly selected in size, shape, and material, will become an interior decoration.
Varieties
The decision should be made at the initial stage of repair, since further planning of the stages of the heated towel rail depends on the method of connecting the heated towel rail and its size. construction work. Despite the primitiveness of the device, there is a huge selection of models on sale that differ from each other according to a number of criteria.
Heat source
Water. Connects to the system central heating or hot water supply. In the first case, the device functions only during the heating season, and sits idle for the rest of the year. In the second case, the operation of the device depends on the stability of the hot water supply. If there are interruptions in the hot water supply, its installation is impractical. The advantages of a water heated towel rail are efficiency (does not require payment for electricity) and safety (eliminates the risk of electric shock during operation).
Most practical solution will be the installation of a combined heated towel rail that can use various heat sources for its operation.
Electric. It is a mobile device that, if necessary, can be moved to the kitchen or hallway. For its operation, only a power source is required. During the warm season, the device can be turned on only when needed, thus saving energy. There are electric heated towel rails with the function of automatically maintaining the required room temperature. Since bathrooms are characterized by high humidity and sudden temperature changes, electrical wiring must be carefully insulated.
Material of manufacture
The metal from which the heated towel rail is made must be resistant to corrosion, temperature changes and pressure in the pipes. The following materials have the highest strength indicators:
- stainless steel. This material will last longer when the device is connected to water, since it is relatively invulnerable to metal-corroding impurities in water, and constant exposure to current will eventually damage it. On the outside, a stainless steel product may have a painted, chrome-plated or polished surface, the most practical of which is chrome-plated;
Due to their popularity, stainless steel products are often counterfeited. Therefore, when purchasing, you should carefully examine the quality welds and ask the seller for a quality certificate for the product.
- black steel. A heated towel rail made of black metal is best used in a private home with individual system heating, since metal is sensitive to the composition of water. It is permissible to install a double-circuit system with an additional heat exchanger in the apartment;
- non-ferrous metals. Copper products are resistant to corrosion, have good thermal conductivity and are light in weight. Their only drawback is their high cost. Commercially available imported brass heated towel rails are not designed for connection to a central heating system, as they have low operating pressure.
Size
Since the main function of a heated towel rail is to create a comfortable atmosphere in the bathroom, its size should be selected taking into account the volume of the room. The optimal ratio of bathroom volume and sanitary ware size is shown in the table.
| Height/width, cm | Volume of heated room, m³ |
| 50/40 | 4,5-6 |
| 50/50 | 4,5-6 |
| 50/60 | 4,5-6 |
| 60/40 | 6-8 |
| 60/50 | 6-8 |
| 60/60 | 6-8 |
| 80/40 | 7,5-11 |
| 80/50 | 7,5-11 |
| 80/60 | 7,5-11 |
| 100/40 | 9,5-14 |
| 100/50 | 9,5-14 |
| 100/60 | 9,5-14 |
| 120/40 | 11-17 |
| 120/50 | 11-17 |
| 120/60 | 11-17 |
Shape Another important parameter is the distance between the eyeliners, which can vary from 30 to 70 cm.
The most common forms of heated towel rails are “coil” and “ladder”. If you choose from them, the “ladder” is much more convenient: it has a larger heating area and accommodates a larger amount of laundry. The “coil” is cheaper and easier to install, so most consumers choose it.
An original solution would be a rotating accessory. It is a design M-shaped with a different number of hinges that can rotate 180°.
Modern heated towel rails, in particular from foreign manufacturers, are distinguished by their variety and whimsicality of shapes. Stylish designs in the form geometric shapes, letters, various symbols, with an intricate interweaving of pipes will become a real highlight of the bathroom.
Manufacturer
engaged in the production of heated towel rails whole line Russian and foreign companies. Imported equipment comes in a wide range of shapes and colors. Products from German companies Zehnder, Arbonia, Kermi, as well as the Czech Korado are popular. When choosing rotary models, pay attention to companies such as DM (Germany), Korin (Finland), Global Ship (Italy), Varmos (Norway).
The leader in the domestic market is the Terminus company, which produces more than 180 models of water heated towel rails and about 20 electric ones. Optimal price-quality ratio for products Russian manufacturers Sunerja, Tera.
How to choose a heated towel rail?
The main criterion that you need to rely on when choosing the type of device is the constant availability of hot water. Otherwise, it is better to purchase an electric version.
When buying a water heated towel rail, pay attention to the correspondence of the diameter of the pipes of the device with water pipes. Before purchasing a device, find out the pressure indicators in the water supply system of your home and add a couple of positions to them, taking into account possible water hammer. Check if these indicators correspond specifications selected model.
It is very important to have a water heated towel rail shut-off valve or the “Mayevsky tap”, which allows you to release the air lock and ensure normal circulation of hot water.
Electric models differ from each other in power, which varies from 100 to 2000 W. When choosing power, focus on the area of the bathroom. For example, a heated towel rail measuring 50x60 cm at a temperature of +60°C will heat a room of 2.5 square meters. The presence of a thermostat will save energy and provide a comfortable temperature in the bathroom.
Bathroom design
A large range of models allows you to choose a heated towel rail to suit any bathroom design. If the bathroom design is made in baroque or retro style, a copper-colored model or with a bronze patina finish would be appropriate. Shiny chrome surfaces fit perfectly into high-tech and minimalist styles.
Intricately shaped heated towel rails will decorate a modern style bathroom. If you do not want to draw attention to this interior detail, match it to the color of the trim. The contrasting color of the heated towel rail will make the interior brighter.
Photo gallery: heated towel rails of different designs
A properly selected heated towel rail will provide comfortable living conditions in the bathroom. To ensure that it fulfills its functions and fits harmoniously into the interior, choose a device taking into account the characteristics of your apartment, the size and style of the room.
Choosing the right heated towel rail for your bathroom is very important. After all, the convenience of using the room where a person receives depends to a large extent on this device. water procedures.
The device we are interested in is used for drying wet things after washing, bathing and washing. In addition, it is necessary to maintain comfortable conditions in the bathroom. If the described device is installed in it, you will never freeze when leaving the water after swimming.
Device for drying wet things
Currently, you can choose one of three types of heated towel rails:
- Water. This device is a pipe bent into a coil. Water (hot) circulates through it. Such structures are initially installed in the bathrooms of apartments in high-rise buildings. A water heated towel rail is usually connected to the heating system of the home. This means that it operates exclusively during the heating season. The rest of the time it is not used. Naturally, its operation is impossible even during any emergency work affecting the heating system of a high-rise building.
- Electric. A more modern device that can be used at any time of the year. The main thing is that there is electricity in your home. Installation of such products can be done not only in the bathroom, but also in the kitchen. But, as you yourself understand, electricity bills during their operation will be slightly higher than usual.
- Combined. It is a kind of hybrid of an electric and water product. The combined heated towel rail operates in two modes. It is very comfortable. When the house is not heated, you need to select the electric mode of operation of the device, and with the onset heating season switch to a more economical water one.
Note that devices of the third type are not particularly popular among domestic consumers. This fact is due to their fairly high cost. Many people believe that it is better to choose a cheaper and fully functional electric or water heated towel rail. Let's talk about them in more detail.
When you decide which type of device is most suitable for your bathroom, you should understand the materials from which modern dryers for wet clothes are made. Such knowledge will help you choose the right heated towel rail.
The cheapest devices are made of ordinary steel. Experts do not recommend installing them in the bathroom, as they are mostly short-lived. This is primarily due to the low quality of water flowing through the pipes. Steel devices come in the following types:
- painted;
- polished;
- chrome plated.
Chrome heated towel rail
Dryers with a chrome surface are considered the most expensive, but also the most durable. Polished structures have a presentable appearance and last a relatively long time. But a painted heated towel rail almost immediately after starting use in the bathroom loses its original appearance. This does not apply to foreign steel products, which are produced with mandatory polymerization of the metal outside and inside the structure. Such devices can be used for decades.
Designs for drying things made from stainless steel are characterized by maximum durability.
If you plan to install a heated towel rail for years to come, you should choose just such a product. And lovers of special aesthetics and originality in the interior of the bathroom can be advised to take a closer look at brass and copper structures. They look great and have a high heat transfer rate. The disadvantage of such products is their relatively low durability (when compared with stainless steel devices).
Electric heated towel rail - reliable autonomous system, which will work regardless of the availability of hot water in the heating system of the home. In such structures there are no problems with water pressure, and air pockets do not appear in them.
Electrical structures can be “dry” or “wet”. A special heating cable is installed into the housing of the first ones (about the same as the one that is installed in the currently popular heated floor). But the circuit of “wet” products is filled with oil or antifreeze and these substances are heated by a heating element located at the bottom of the structure. Which heated towel rail should you choose – “wet” or “dry”? Decide for yourself. In doing so, pay attention to the following factors:
- Devices with a heating cable heat up very quickly, but also cool down quickly. And “wet” structures remain hot for quite a long time after switching off.
- Products with oil are more expensive than their cable counterparts (their production process is more labor-intensive due to the need to ensure absolute tightness of the housing in which the liquid circulates).
- Systems that allow you to select the drying operating temperature are most often installed in devices with heating elements. “Dry” designs usually work according to a simpler standard - “turn it on and forget it.”
- In terms of power, an electric heated towel rail with a cable is weaker than an oil one. You need to choose a “wet” unit if you plan to heat the bathroom with it. If the design is required solely for drying wet things, it is better to purchase a less powerful (and more economical in terms of electricity consumption) “dry” device.
Electric towel dryer with cable
Before you finally choose an electric heated towel rail, consider the following. Oil-filled devices require professional installation. And cable structures can be installed by any home craftsman without any problems. This electrical unit can be placed in any position; there are no special requirements for its installation.
In fact, you can already easily decide which electric heated towel rail will suit you in all respects. But don't rush. We have prepared a few more for you important recommendations from the pros. They are given below:
- The more horizontal tubes there are, the higher the heat transfer of a structure.
- For a small bathroom, it is better to buy sliding products. They have side “ears” that fold towards the center when the unit is not in use. Due to this, the design takes up minimal space when folded, and when opened, you can dry a lot of things on it.
- Convex tubes hold laundry much better during drying than straight tubes.
Let's add that electric dryers Available in floor-mounted and wall-mounted versions. Those that are placed on the floor are more mobile. If necessary, you can move them to another place (for example, to the kitchen) or even take them with you to the dacha when you plan a long vacation outside the city. Wall-mounted products are installed permanently using special fittings (in this case, you need to make holes in the walls for fastening them).
The water unit for drying clothes in the bathroom, as noted above, is made of different materials. But this is far from the most a big problem choosing such a device. The bottom line is that the technical characteristics of water devices must fully meet the pressure testing and operating pressure indicators that are present in the hot water supply system of an apartment building.
In accordance with domestic State Standards and Sanitary Standards, any sanitary and technical water intake equipment in high-rise buildings must withstand pressure of up to 7.5 atmospheres. In practice, water intake systems in high-rise buildings operate at average loads of no more than 4–6 atmospheres. But with water hammer, this value can increase. In this regard, be sure to look at the passport of the heated towel rail you like. And clearly recognize in it the maximum pressure at which the device is capable of functioning.
Passport of a water heated towel rail
This advice should always be followed when you buy products from foreign (in particular, European) manufacturers for high-rise buildings, and don’t pay attention to it at all if you are purchasing a device for installation in a private home. In it, the pressure in the heating and water system, as a rule, does not exceed several atmospheres. Any model of dryer is suitable for a private home.
Structurally, water heated towel rails from foreign manufacturers vary. They are made with side shelves, various ladders, in the shape of the letters P, M, and so on. Which specific device to choose is up to you. The main thing is that it fits in the bathroom and does not clutter it. To do this, it is enough to correctly measure the dimensions of your bathroom.
Installation of water structures, if desired, can be done with your own hands. carried out near the heating riser, connected to the pipe using elbows, couplings or a shut-off valve. All connections made must be sealed. The easiest way to do this operation is with Teflon tape. And do not forget to turn off the hot water before starting installation work. Let your bathroom always be warm and dry!
Water heated towel rails are equipment that maintains a comfortable temperature in the bathroom. Plus, it can dry towels in just a couple of hours. The circulation of hot water inside the device ensures constant and uniform heating.
Many people do not know which one - electric or water heated towel rail - to choose. Water-type models have many advantages and are in demand among different consumer groups. The main advantages include:
Despite the undeniable advantages, these devices also have certain disadvantages:
- complex installation: in order to connect the structure to a hot pipeline, you need to use the services of a specialist;
- seasonality of operation: when the heating is turned off, the heated towel rail will not work and the pipes will be cold in spring/summer.
Model sizes
When choosing a device, much attention is paid to the size of the heated towel rail for the bathroom. They must necessarily correspond to the volume of the room.
Today you can buy units of different diameters. There are products with an outer diameter of 25 mm (¾”). They usually have an M- or U-shape. When the diameter is 1¼”, the figure is 40 mm. Such devices are often made in the U shape and are quite rare, which is explained by their complex production. 1” models with a diameter of 32 mm are also available for sale. These include most of the classic devices.
There is another way to calculate a heated towel rail, the dimensions are determined as follows: when the coolant temperature is +70°C, then the ratio of the heated room and the power of the device will be 2.5 m³/100 W.
Instrument shape
Manufacturers produce a variety of water heated towel rails for the bathroom, which differ in various indicators. One of the main differences is the shape:
There are also other types of heated towel rails for bathrooms, which depend on the manufacturer:
- Finnish models. They are very popular because they come in many shapes. They are attached to the water supply using 2 vertical pipes, which are placed at an angle. Thanks to this fastening, things do not interfere with each other when drying.
- German models. They are distinguished by great functionality and a choice of forms. Some options are equipped with mirrors and robe hooks. The high price is justified by durability and high quality.
- Italian models. Most of them are equipped rotating mechanism, which provides a 180° turn. But in this case, the mass of things cannot be more than 5 kg.
Material of manufacture
When determining which heated towel rail is better, you need to rely not only on its technical characteristics and shape, but also on the material of manufacture. Today they produce products that are made from:
- of stainless steel;
- gland;
- non-ferrous metals;
- become.
Iron water heated towel rails are the most budget-friendly models, but their service life is very short. Therefore, their purchase is justified only if you have a small amount of money.
Stainless steel products are reliable and will last a long time. The advantages of such products include the ability to withstand high pressure and corrosion resistance. If you select distinctive features, then we must say about the high cost, in comparison with steel or copper devices. In addition, you can buy a budget analogue - a device that is painted to look like stainless steel. But during operation, it may lose its attractive appearance.
Copper heated towel rails are resistant to rust and are less expensive. Their permissible pressure is 5-6 bar, so they are ideal for private houses in which the water pressure is no more than 2-4 atmospheres.
Steel models are very popular due to their low cost. However, during use they may develop corrosion marks. Such a device must be completely filled with water, otherwise oxygen will actively accumulate even in a small void, which will provoke immediate oxidation of the pipes.
Connection methods
Before choosing a heated towel rail for the bathroom, you need to think about the connection. It depends on its design. There are 4 connection methods in total:
TOP 5 models
In the modern construction market you can find many manufacturers, but there is a certain rating of the most proven and high-quality models of heated towel rails:
1. ENERGY MODERN.
This bathroom equipment is made from high quality food grade steel. It is fully adapted to the aggressive environment of the hot water supply system. The device is durable and reliable, and the mirror polishing will not darken during use. The design of the model is suitable for any style and will add originality to it. Thanks to the availability large quantity horizontal crossbars are provided high functionality heated towel rail.
2. TERMINUS ASTRA NEW DESIGN.
Such a device is perfect combination cost, attractive design and functionality. It is suitable for connection to hot water and heating systems. The tube is made of high quality stainless steel and welded according to special technology, and the surface polishing is performed at the highest level. Due to the fact that the manufacturer produces models of different widths and heights, everyone can choose the right option for themselves. The design of the device is designed for temperatures up to 115 ° C and a pressure of 8 atmospheres.
This model of heated towel rail is not demanding on water quality and is resistant to rust formation. She stands out for her unusual design. The manufacturer makes it from brass using chrome plating and decorative processing. Good quality soldering and assembly makes installation easy and quick. Compact dimensions and the ability to rotate the dryer by 180° significantly expand functionality devices. The manufacturer's warranty is 2 years. Valves are included with the device.
4. SUNERGY FUROR
This is one of the most attractive devices in terms of design. It is stylish, functional and high quality at the same time. The heated towel rail comes complete with all necessary components and accessories. The material of its manufacture is stainless steel. Moreover, it is possible to supplement the device with valves, thermostats, hangers, shelves, reflectors and corners. There are several surface treatment and color options.
5. ZEHNDER STALOX STXI-060-045.
There are 2 versions of such devices - with a polished surface and with powder coated. The heated towel rail comes with an installation kit. Pressure up to 12 Bar and operating temperature of 120°C are allowed. The device is made of stainless steel in the shape of a ladder, and the horizontal and vertical parts are connected by welding with square registers. Due to its compactness, the equipment can be installed in almost every bathroom. In addition, it is equipped with an air closer, which helps prevent the formation of air jams during operation.
Designing a bathroom means not only tiling the floor and walls, installing a sink, bathtub and the required furniture. To fully equip this room, you cannot do without a heated towel rail.
With the help of such a device, the bathroom will always be comfortable and warm, the towels will be dry, and condensation will not accumulate on the pipes and mirror. It provides the required microclimate in the room and acts as a dryer. There are the most different kinds heated towel rails for the bathroom and their sizes, which is why it is important to understand the main nuances of such products and choose the required option.
What is a heated towel rail
A bathroom is a hygienic and sanitary room where people carry out water procedures and also do laundry. As a result of the constant use of water, increased humidity is observed in this room. That is why it is imperative to install a heated towel rail in the bathroom. This appliance is a device with a curved tube used for drying towels and laundry. Basically, such a device is mounted on the wall.
There are a variety of types of heated towel rails for the bathroom, their sizes vary in pipe diameter, connection method, shape, as well as the material from which the device in question is made. Thanks to a wide selection of similar sanitary products Selecting the required model is quite simple. To do this, you just need to measure the distance between the entry points and select the shape and diameter of the pipes.
Basic functions of the device
During the repair work Many people wonder whether it is really necessary to install a heated towel rail in the bathroom. Such a device is required for purposes such as:
- drying;
- decrease in humidity levels;
- heating the room.
How to choose a device by size
For each bathroom, the dimensions of the water heated towel rail are selected individually so that such a device fits perfectly into the interior. In addition, you need to consider how many towels will be dried on this device at the same time. It is worth remembering that the larger the surface of the heated towel rail, the faster the room will heat up and the towels will dry.
Types of connection
Connecting a heated towel rail in the bathroom largely depends on the diameter of the pipes and the shape of the device. There are several options for devices that differ in the type of connection. good and convenient option A water heated towel rail with a side connection is considered. This model is characterized by the fact that it has a connection that connects to the hot water pipes on the side.
A coil with a bottom or universal connection is perfect for a bathroom. When installing a heated towel rail with a universal connection, the unnecessary option is simply closed with a plug. Replacing a heated towel rail is quite simple and can be done even without the help of specialists.
