Modern kitchens are filled with various functional items that make staying in the room as comfortable as possible. Of particular importance is the presence of a hood, the main task of which is to remove fumes and steam that arise during cooking: several techniques can be used to disguise the exhaust pipe in the interior.

What types of hoods are there?

Most often, a circulation hood is used, which thoroughly cleans them as air masses are transported, using a carbon and grease filter. This modification is convenient in that it does not need to be connected to ventilation or a separate pipe.

The disadvantages of a circulation hood are the following:

1. Due to its high price, not all people can afford this model.
2. Maintenance during operation is quite complex.
3. Replacement filters will need to be changed from time to time.

As for more affordable options, among them we can recommend a flow-through hood. During its installation, a connection is made with a pipe - a metal corrugation painted silver.

This pipe has the following advantages:

1. Ability to stretch several times.
2. In such a system, sharp bends and connecting elements are not needed.
3. The price is affordable for the average person.
4. Servicing the corrugation is quite simple.

As for the disadvantages of the pipe, first of all it is its significant diameter, which is why the product is very noticeable from the outside. Therefore, after installation you have to think about how to hide the pipe from the hood.

Plastic ventilation pipes

Most often, round or rectangular air ducts are used, with their own advantages and disadvantages. In round channels, air moves much faster, since it does not encounter any special obstacles. As for rectangular pipes, they are convenient in their compatibility with almost any type kitchen interior, finishing or headset.

Modern plastic pipes have the following advantages:

• Silence. The air movement is accompanied by very little noise when compared with metal corrugation.
• Contaminants practically do not accumulate inside the channels, due to the very high streamlining of the walls.
• Very little resistance during removal of contaminated air.

When purchasing a plastic air vent, it is important to equip it with all the necessary parts and connecting elements.

Corrugation characteristics

This air channel is considered the easiest to install. All you need to do is connect one end to the hood and the other to ventilation duct. Fastening is carried out using special round clamps with bolts. In cases where the pipe cross-section exceeds the same exhaust parameter, tight pressing of the clamp and adapter will be required.

An alternative solution in in this case is the use of galvanized pipes: they are not afraid of corrosion, and are able to effectively remove all kitchen fumes. Air duct structures can be flanged, welded, or waferless. As a rule, the pipe coming out of the corrugations has a square shape, while the adapter has a round shape. When purchasing products, it is important to pay attention to all such nuances.

Installation Features:

• It is important to match the diameters of the pipe and the ventilation duct. It is allowed for the pipe to be slightly larger.
• It is recommended not to use pipes longer than 3 meters.
• Bend the pipe at an angle greater than 90 degrees can create problems in transporting air within the duct.
• To prevent backdraft from occurring, the use of special plastic and film valves is practiced.

How to hide a pipe

When installing a hood, you have to choose in advance how to hide the pipe from the hood in the kitchen, because it often spoils the entire interior.

The most in simple ways How to hide a hood pipe in the kitchen, regardless of the type of pipes used and their parameters, are:

1. Plastic box. Sold in ready-made form. The models and designs of plastic boxes are very diverse, which makes choosing the best option for a specific interior quite simple. It is most convenient to use this disguise on hoods located in close proximity to the ventilation shaft.
2. Suspended ceiling. This design ceiling is very convenient for hiding what has already been laid during overhaul air channel from the hood. A multi-level ceiling is very convenient in this regard, since any communications can be masked under the lower level.
3. Built-in hood. In this case, the hood and pipe are built into the frame part of the kitchen unit. This is done in the area of ​​the top drawers and cabinets, right up to the ceiling surface. This design is characterized by good compactness, which allows you to leave space for shelves, kitchen utensils and other utensils. Most best option– production of custom-made furniture for specific kitchen sizes.
4. Coloring. A very inexpensive and very popular way to decorate a hood pipe. When choosing suitable color The main interior tone is taken as a guide, but it should not catch the eye.
5. Decorative ledge. For this purpose they use plasterboard sheets, covering with them the area where the pipe passes. In the future, it can be decorated with lamps that create additional lighting. In addition, a plasterboard frame often complements the tension fabric.

The hood kit contains all the parts necessary for installation. You can also independently create a set of elements for the selected pipe. As for solving the question of how to disguise a pipe from a hood, here they are primarily guided by the general interior style. IN modern design The opposite effect is often used, when the area with the pipe is not masked, but is even more accentuated.

A modern kitchen includes all the necessary and functional items that bring comfort and coziness to residents. A special place is occupied by the hood, thanks to which steam and heat do not spread throughout the room, but are taken outside. The design approach allowed manufacturers to create original forms of hoods, but at the same time there is an element that spoils the appearance - the pipe. It needs to be disguised, and for this you need to know how to hide the pipe from the hood.

Types of hoods

The most common option is a circulation hood. In its operating system, air purification is accomplished through thorough filtration using a carbon and grease filter. The advantage of this model is that there is no need to connect the structure with ventilation or remove the pipe. However, there are a number of disadvantages:

• the high cost does not allow everyone to purchase it;
• difficulty in care;
• the need to periodically change filters.

If you decide to find a more affordable model, then you should pay attention to flow-through hoods. When installing them, you will need to connect a pipe - a silver metal corrugation. This type of pipe has the following advantages:

• stretching over long distances;
• the ability to avoid sharp bends and connecting elements;
• affordable price;
• ease of care.

There are also disadvantages, or rather the large diameter, due to which the pipe immediately catches the eye in the kitchen. To solve this problem, you need to come up with a way to disguise it.

Hoods also differ in installation method:

• island;
• wall;
• flat;
• built-in;
• corner

You should choose depending on the placement of the hob.

Note! A kitchen made in high-tech style does not provide for masking the corrugation. More precisely, in this direction it is permissible to use metal parts and elements.

Plastic pipes

Simple and at the same time in an original way A plastic air duct will mask the pipe from the hood. Since in standard apartment ventilation ducts are located away from household appliances and slabs, then residents have to independently assemble the structure, which will consist of sections, sleeves and other elements. Thanks to the wide range of selected materials, you can choose the desired shape with a specific cross-section.

Most often, a plastic air duct has a round or rectangular cross-section, each of which has its own differences and advantages.

1. The circular cross-section allows for less air resistance, which means the air duct will be highly efficient.
2. Pipes with a rectangular cross-section easily harmonize and match with almost any interior, decoration, and kitchen set.

As you know, modern plastic pipes have a number of advantages:

• lower noise level during operation in contrast to metal corrugation;
• no greasy deposits remain on the walls of the pipes, since all vapors and waste go directly into the shaft;
• no resistance during operation.

Note! Giving preference to plastic pipes, you need to make calculations and buy everything necessary details, including connecting elements.

This type of pipe is the easiest to install. To do this, one end is fixed to the hood, and the other to the ventilation duct. Special round clamps are used as fasteners, which are tightened with bolts.

The diameter of the pipe may be larger than the diameter of the hood, so the clamp is pressed tightly against the adapter. You can find an alternative - galvanized pipes. They do not rust and completely remove kitchen odors. There are different duct systems: flanged, welded and wafer.

Note! The pipe exit from the corrugation has a square cross-section, and the adapter should be round. When making purchases, pay attention to the need to purchase the appropriate adapter.

Installation considerations

To installation work were carried out correctly, follow these tips:

• the diameter of the pipe itself must match the diameter of the ventilation hole or be larger;
• the total length of the pipe should not exceed 3 m;
• do not bend the pipe more than 90º;
• To protect against backdraft, special valves are used - plastic or film.

Pipe masking options

An important process when arranging a hood is to camouflage the pipe so that its appearance does not spoil the created interior.

Regardless of which pipes were chosen, what their diameter and color are, you should consider the simplest and most uncomplicated options for how to hide them:

1. Plastic box. The finished product is sold in specialized stores. A wide variety of models and designs allows you to choose the best option that will fit into your created interior kitchens. This masking option will be especially appropriate when the hood is placed close to the ventilation duct, which means there are practically no right angles.
2. Suspended ceiling and box. During the overhaul process, the exhaust pipe should already have its own path, so it can be hidden behind the structure suspended ceiling. Many organizations and repair teams offer their services for the design and installation of a special pipe box. Consider the option with a multi-level ceiling: the lower level can be placed around the entire perimeter of the room and, thus, all communications will be hidden.
3. Built-in hood. This option involves installing the hood and pipes directly into the frame of the kitchen unit. Top drawers and cabinets up to the ceiling are allocated for it. This design takes up little space, so there is space for installing shelves and placing kitchen utensils or utensils. It is best to order such furniture individually so that everything fits into the kitchen.
4. Painting. A budget-friendly and common way to disguise a kitchen hood pipe is painting. The color is chosen in accordance with the main palette of the interior, and it will not be noticeable.

There are also options for covering the area with the pipe with sheets of plasterboard, thereby creating a decorative protrusion. You can install lamps in it, which will serve as additional lighting. Do not forget that plasterboard frame can be supplemented with tension fabric.

One of the most important elements modern kitchen is a hood. The hood serves to purify the indoor air from smoke, odors, various fumes and combustion products generated during cooking.

There are two types of hoods - flow and circulation. In a flow-through hood, air is discharged through an air duct into the ventilation shaft; there is no air in the circulation duct, and the air is purified by filtration in the hood itself.

Circulating hoods fit into any interior due to the variety of sizes, shapes, color solutions and material, but they require more complex care, since the filters must be periodically changed or cleaned. Flow-through ones are easier to maintain, but their installation is complicated by the need to connect the hood itself to the ventilation shaft of the building. As a rule, the hood and ventilation shaft are located on different walls kitchens.

Many owners of flow hoods are faced with the fact that the air duct spoils appearance the entire interior.

And, as a result, the question arises: how to hide the air duct from the hood so that it is not noticeable?

There are several ways to disguise a hood.

Option #1

If you plan to buy a new kitchen, you need to choose a model with a canopy. In this case, the exhaust pipe will be located above the protruding canopy, close to the wall and will be practically invisible.

How to hide a hood in an old kitchen? If you don’t plan to buy a kitchen, you can simply complete this very canopy and get a very nice decor.

Option No. 2

To hide the hood in the kitchen, you can replace the corrugated pipe with a white flat air duct, which, if desired, can be painted in any color or even covered with wallpaper to match the kitchen walls. It is worth paying attention to the fact that this method is not suitable if the building has weak ventilation system, that is, the cross-section of a flat pipe may not be enough for the normal functioning of the hood.

Option No. 3

Quite often, when the question arises about how to hide a pipe from a hood, installers suggest making a suspended or suspended ceiling. In this case, the pipe is located above the false ceiling and is not visible at all. But if any problems occur in the air duct, it will be impossible to get to the pipe unless you disassemble the ceiling. Therefore, before masking the kitchen hood pipe with the ceiling, think about whether you are ready to redo the ceiling if something happens.

Option No. 4

The corrugated pipe of the hood can be disguised with a plasterboard box, which will create the effect of a two-level ceiling. The box is a metal frame covered with plasterboard. The box itself can be straight, L-shaped or another shape and it is usually attached to the wall or ceiling. Very often lamps are mounted in such boxes.

Option No. 5

In this version we will consider detailed instructions, how to hide the box from the hood.

Step 1. In order to hide the hood, you will need hanging cabinet same design as the entire kitchen. If you buy a new kitchen, immediately include another cabinet for the hood. In other cases, the cabinet will have to be ordered somewhere. In the bottom of the cabinet it is necessary to cut a hole in the shape of the hood, and in the shelves and “ceiling” - circles corresponding to the diameter of the air duct pipe.

Step 2. Attach the hood to one of the inner shelves of the cabinet and to the bottom using screws so that the hood itself is inside and only working surface-outside. Depending on the design and type of hood, the fastening may be different.

Step 3. Fasten the corrugated pipe with one side to the hood, and thread the other into the holes made earlier.

Step 4. Cover the hood with a panel similar to cabinet doors.

Step 5. The corrugated pipe connecting the hood and the ventilation shaft can be masked with a plastic box or one of the above methods.

You can also lead the pipe to the ventilation hole not through the “ceiling” of the cabinet, but through its side walls. At the same time, there will be less space for kitchen utensils in the cabinets, but the pipe will not be visible at all.

We have found out how to hide the corrugation from the hood and the hood itself, all that remains is to decide which of the above methods is right for you.

Your kitchen will delight you with its coziness and comfort, and no pipes can interfere with this!

Photo sources: tehnikhouse.by, remontview.narod.ru, mama.md, s09.radikal.ru, funfix.ru, okkolv1.blogspot.com, remont-samomu.blogspot.com, homemasters.ru, geoskuhni.ru, potolokglok .ru

A hood is necessary for high-quality air purification from various vapors, particles of fat, and soot that can form in the kitchen during cooking. It is thanks to this useful device, the vapors are vented outside rather than spreading throughout the room. Not all hoods require a duct connection.

Some models do not have an outlet pipe, and therefore there are no problems with masking ventilation.

Other devices purify the air through a chimney pipe, which is rarely located next to the ventilation duct. This does not always look aesthetically pleasing and spoils the appearance of the space, so the question often arises of how to hide the pipe from the hood so that the kitchen looks impeccable.

Hoods can be circulating or flow-through. Both options have their pros and cons, so everyone chooses the most appropriate solution for themselves, based on capabilities and preferences:

1. A circulation hood, the air purification work of which is based on the use of a grease-collecting carbon filter, does not have an air duct. The filters used need to be periodically replaced, but it is always possible to place the stove anywhere, because there is no need to connect it to the location of the ventilation duct.
2. Flow hood, thanks to which the polluted air is completely removed into the ventilation shaft through a special air duct. This hood is simple and easy to maintain, but its installation requires connecting the hood to the ventilation shaft of the building. When choosing this model, you will have to think in advance about ensuring that the exhaust pipe does not spoil the appearance of the kitchen, and for this you will have to fork out additional money for Consumables necessary for high-quality masking of the air duct.

There are several ways to hide the corrugation from the hood in the kitchen - in a multi-level plasterboard ceiling, inside upper cabinets, behind a suspended ceiling or in a plastic box.

None modern kitchen can't do without a hood. This device provides high-quality indoor air purification, eliminating not only unpleasant odors formed during cooking, but also from particles of fat, soot and other contaminants. Installing a hood requires certain knowledge and a competent approach, while the equipment must not only work properly, but also fit successfully into the interior, in harmony with the surrounding details. Therefore, before installing the product, you need to think about how to hide it so that it does not spoil the appearance of the room.

Today, household appliance stores offer two types of hoods:

• flow-through,
• circulation.

The first option requires the presence of an air duct through which the device will be connected to the ventilation shaft using a pipe. Circulating models do not require connection to ventilation, but work by purifying the air using filters. They have a variety of designs, but are much more labor-intensive to maintain than flow-through ones, as they require regular filter replacement.

Types of pipes

The air duct opening is not always located next to household appliances. Sometimes its location may even be on the opposite wall from the kitchen unit. This causes a lot of problems when installing a hood, and requires the mandatory use of a pipe that will connect the device and ventilation. Pipes differ in materials, shape, and cross-section. The most popular ones include plastic and corrugated options.

Plastic

Plastic pipes consist of separate sections, sleeves and other elements. They can be round or rectangular in cross-section. IN round pipe the air is subject to the least resistance, so this option is considered more effective. Rectangular models are easier to fit into the kitchen interior; they are less noticeable on the wall than round ones.

Plastic pipes have a number of positive qualities:

• Unlike metal structure, when the hood is running, the noise from the plastic pipe is not heard.
• The smooth walls of the plastic do not accumulate particles of fat and other contaminants, which cannot be said about the corrugated version.
• Air passing through plastic pipe, is subject to the least resistance.

Corrugation

This option is considered easier to install. You can handle the installation yourself without resorting to the help of a specialist. One end of the corrugation is attached to the hood itself, and the other to the ventilation hole.

Among the advantages of corrugation are the following:

• Ability to stretch over long distances.
• Low price compared to other types of pipes.
• Easy to install.

Decor options

In order for the kitchen interior to look harmonious and attractive, all elements must be thought out to the smallest detail even at the stage of developing the design project. You cannot ignore such details as water and gas communications, wires, etc. The ventilation pipe is no exception. Such an unattractive element should be hidden from view. It can be done different ways, for example, use a plasterboard structure, a kitchen cabinet, a plastic box, a suspended ceiling, etc.

Interiors in the loft style can allow you not to hide the metal corrugated pipe, but, on the contrary, to focus on it.

Plasterboard construction

You can hide the air duct by covering it with sheets of drywall. This design can play not only a functional role, but also a decorative one, that is, it can become a successful element of the interior. If the plasterboard box should not stand out too much in the interior, then you can decorate it with the same finishing materials the same as the kitchen walls.

The first stage of work will be to create a sheathing according to the dimensions of the pipe. This can be made from a metal box. Then, the sheathing should be covered with sheets of plasterboard and fixed to the wall or ceiling. Such a design can have any shape and size. It looks good together with a suspended multi-level ceiling made from the same plasterboard.

Stretch ceiling

In addition to the plasterboard structure, the exhaust pipe can be hidden in a suspended ceiling. This is one of the most inconspicuous options, but it also has its own nuances.

Do not forget about possible problems that may arise in the operation of the air duct. In this case, you will have to disassemble the ceiling, since it is simply impossible to get to the pipe in any other way.

This will lead to additional financial costs. And in order to return the interior to an attractive appearance, you will have to turn to a stretch ceiling specialist again.

Plastic box

You can effectively hide the pipe using a plastic box. Such options exist in various designs and have a wide selection of shapes, colors and decor. Some models may even be equipped with built-in lighting. But the option with a plastic box is suitable only if the air duct opening is located in close proximity to the hood.

Wardrobe set

Built-in kitchen set – perfect option For modern interior kitchens. It is convenient and functional, moreover, one of the, which is located directly above hob, can be a good shelter for hoods and pipes.

Typically, the design of such a module involves the presence of side panels and a rear wall, as well as facades. The interior space of the cabinet is reserved only for the exhaust pipe; there are no shelves or other elements. But outwardly it does not stand out in any way, and the set and the interior as a whole look organic and holistic.

But a hanging cabinet above the hob can also be used for circulation hoods. In this case, only the body of the device itself will have to be hidden; only the bottom panel with the control buttons will be visible from the outside. Since there is no pipe in this option, the interior of the cabinet can have a shelf that will be used for storing dishes or food.

If you have confidence in own strength and at least minimal skills, you can install the exhaust pipe yourself. In addition, find a suitable step by step instructions It won't be difficult to find photos on the Internet. Otherwise, it is better to contact a specialist and not be afraid for the quality of the installation, as well as the subsequent operation of the hood.

Before installing the pipe, you need to study some tips:

• Its diameter should not be less than the size of the ventilation hole.
• A pipe that is too long, more than three meters, can negatively affect the quality of the hood.
• Its bending angle should not be more than 90 degrees.
• To protect the pipeline from backdraft, it is necessary to use special valves (plastic or film).
• The fewer bends the pipe has, the more efficient the hood will work.

If you follow all the above installation tips, you can get good result, in which the hood will work efficiently and serve for a long time. And in order to hide an unattractive metal or plastic pipe from view, you can use various ways: from furniture cabinets to plasterboard boxes. In any case, you should focus on the interior of the kitchen and personal preferences.