Nowadays, many residents of megacities are purchasing suburban land plots near open water bodies in order to build a cottage there and have the opportunity to relax almost in nature.

Houses made of 6x6 foam block are a personal choice for those who want to get comfortable housing without spending a large amount of money. The resulting living space is quite enough to accommodate several adults or a small family.

House made of 6×6 foam blocks: advantages of construction

For some reason, when using the phrase Vacation home many imagine a cottage made of wood or a building erected using the frame construction. A house made of 6x6 foam blocks is an excellent choice, as it gives its owners many advantages:

• The cottage is a capital building, the service life of which exceeds one hundred years.
• With the right approach to the work, the structure retains its original technical characteristics throughout the entire period of use.
• Country house 6x6 allows you to create full-fledged living conditions, with a bathroom, kitchen and bedroom/living room.
• There is the possibility of installing a fireplace and stove for cooking. Moreover, ordinary wood or coal can be used as fuel for them.
• A country house made from 6x6 foam blocks can be built in significantly less time than when using brick as a material. The reason for this is that the size of the SME exceeds that of its counterpart.
• A house made of foam blocks 6 6 requires less money, which means it allows you to save money. In addition, in the future the cottage will not require such high heating costs than in the case of frame construction.
• It is possible to create a layout that fully satisfies the requirements of the owners. This can be either a studio house or a home with several rooms. An excellent choice for a young family with children, as it is divided into a children's room and an adult bedroom.

A modern house made of foam blocks of size 6 6 allows you to carry out almost any finishing of the facade. In addition, this also applies to the choice of roof covering. Metal tiles look good soft tiles, bitumen corrugated sheet, etc. The total weight of the building allows you to reduce the cost of arranging the foundation and make its design simpler.

House made of 6x6 foam blocks: the price of a cottage is affordable for almost everyone

Construction cost consists of large quantity various factors, which may vary depending on each other. There are the following components that have a significant impact on the estimate of a house made of 6×6 foam blocks: the price of earthworks, delivery building materials, performing certain types of work.

It should be noted that ordering the construction of a turnkey cottage will ultimately cost much less than if you look for contractors who specialize in one thing.

The reason for this is that large construction companies have a work process that is fine-tuned to the smallest detail. The price of a house made of foam block with an area of ​​6x6 metro will be less, if only because the company has long-term contracts for the supply of building materials. Of course, for large purchases their cost will be significantly lower than at retail. There are many other nuances that have a significant impact on the final cost of building a country cottage. It is quite difficult to understand all the intricacies without experience in performing work or special education. Therefore, it is better to entrust this to professionals.

How to build a 6 by 6 house from foam blocks. Tips and tricks. Competent design. Features of the construction of foundations and walls. Characteristics of materials. Examples of calculations.

The optimal solution for a small structure is a 6 by 6 house made of foam blocks. To do this, you need to know how to complete a house without finishing and for finishing. How to build a house from foam concrete. Features of foundation construction and wall construction. What you need to know about design. Examples of calculations of the required number of foam concrete blocks.

Characteristics of the materials used. Features of building houses from foam blocks. The main stages of installation and the nuances of constructing reinforced houses.

Modern economic conditions often confuse those who want to acquire their own square meters: the cost of apartments in new buildings is in most cases similar to the cost of individual small houses. Of course, not everyone wants to get involved with individual construction, but those who decide to take this step will definitely never regret what they did.

Expert opinion

Filimonov Evgeniy

Ask a question to an expert

For those who want to save both money and space on the site, there is a decent option - a 6 by 6, two-story house. Its layout can be done as efficiently as possible, so there will be enough space for living.

These dimensions are not taken out of thin air: these are the parameters that can create an area that is optimal and sufficient for an average family to live. If the internal layout of the premises is carried out effectively, the usable space can be used in full - up to 70 m2. At the same time, a 6 by 6 two-story house, the layout of which takes into account the entire internal territory, can accommodate more rooms than city ​​apartment the same area.

What to build from?

To build a house, any modern building material can be used: foam block (gas block), timber, logs, frame system filled with sandwich panels. The choice depends on the personal preferences and financial capabilities of the developer.

In addition to wishes, the choice of material is influenced by the purpose of the house. If it is not intended for year-round living (dacha), you should not use massive wall structures aimed at preserving heat, and, conversely, for permanent residence provide heating devices, appropriate communication systems. From any of the materials listed above, you can build both a summer house and a permanent house. Next, let's look at the pros and cons of popular options.

Stone castle

The most common material for building a house is lightweight concrete in the form of gas and foam blocks. Not surprising, because it is durable, extremely safe and effective in operation:

• high noise insulation;
• thermal insulation;
• the material is not subject to combustion;
• resistant to temperature changes.

In addition, its installation is quick and relatively economical. A 6 by 6 two-story house, the layout of which is made of foam blocks is quite simple, and is erected in a short period of time - from 2 weeks to a month. This material allows you to create and arrange your own corner in the shortest possible time.

The advantages also include an economical foundation: for small house There is no need to install a massive base; a shallow strip base is sufficient. This type is quickly installed, requires minimal costs for materials, and quickly becomes suitable for further construction based on it.

The disadvantages include the need to finish all walls without exception: bare concrete looks unpresentable. This is where the shortcomings probably end.

You give us a choice of natural materials!

Wooden materials are divided into several groups:

• rounded log;
• glued/solid timber;
• components of sandwich panels.

Expert opinion

Filimonov Evgeniy

Professional builder. 20 years of experience

Ask a question to an expert

The most common and popular is wooden house 6 by 6 two-story. The timber layout is economical in terms of financial costs and installation.

The construction of the building is quick and easy thanks to the tongue-and-groove system for connecting the fragments.

The cheapest foundation for such a structure can be used - columnar or pile-screw, since the weight of the house is small and a permanent foundation is not required.

How to make a compact layout

Creating a project is an important stage of work that determines the entire construction process. Entrusting it to professionals or doing it yourself is everyone’s choice. Of course, architects will complete the task as efficiently and quickly as possible, but this costs money. For those who want to save money, consider a way to create a 6 by 6 two-story house, the layout of which will be compact.

• On a piece of paper, create a drawing diagram in compliance with proportions for ease of measurement.
• First of all, mark the perimeter and the location of the roads.
• Decide on the desired number of rooms. To save space, you can combine the kitchen with the living room, the bathroom with the toilet, the storage rooms can either be moved outside or their area can be kept to a minimum.
• Indicate the location of the rooms in accordance with the proportions, indicate their sizes.
• Determine the design and configuration of the roof, the location of doors and windows.

What is the price?

Since we are talking about saving, we need to highlight the financial side of the issue. Small house Turnkey timber can be delivered for an average of 400-500 thousand rubles. It all depends on the layout, wall thickness and other options. A block cottage 6x6 meters will cost 1-1.5 million rubles. It is obvious that these prices for residential premises with an area of ​​65-70 m2 are significantly lower than the cost of the same spaces in apartment buildings residential buildings. Of course, the purchase of land is not taken into account here. But if you look at it, the total costs for your own corner, separate or in a residential complex, are approximately the same. Therefore, to each his own.

Complete house without finishing

• The foundation is not included in the package (must be ordered separately).
• Height of the 1st floor - 2.85 m; attic – 2.7 m.
• The thickness of the external walls is 20 or 40 cm (your choice).
• There are no interior partitions on the 2nd floor.
• Openings - hot-rolled corner 50x50x5 mm to support blocks.
• Subfloors - edged board 20-22 mm (1st floor only).
• Construction of a house on your site.

Equipping the house for final finishing

• Joists and floor beams - board 100x200 mm (step 600-700 mm.
• External walls - blocks 625x250x200 mm (foam concrete or aerated concrete).
• The thickness of the external walls is 20 or 40 cm.
• Interior partitions on the 1st floor are blocks 100 mm thick.
• Interior partitions on the 2nd floor - frame 100 mm; plasterboard covering.
• Reinforcing belt - 150x200 mm external walls, 150x100 mm partitions of the 1st floor.
• Reinforcement - every third row is 8 mm reinforcement class A3 (corrugated).
• Finished floors - OSB board.
• Ceilings and attic - plasterboard.
• Mansard gables - with outside OSB-3 board 9x1250x2500 mm.
• Rafter system - timber 40x100x150 mm; sheathing made of boards 20-22 mm.
• Roofing - metal tiles (color to choose).
• The entrance door is metal.
• Assembly on site is included in the price.

Turnkey home furnishings

• Assembly on site - included in price
• The foundation is not included in the basic package (must be ordered separately).
• Height of the 1st floor - 2.55 m; attic – 2.4 m.
• Joists and floor beams - board 100x200 mm (step 600-700 mm).
• External walls - blocks 625x250x200 mm (foam concrete or aerated concrete).
• The thickness of the external walls is 20 or 40 cm (see price on the project page).
• Interior partitions on the 1st floor are blocks 100 mm thick.
• Interior partitions on the 2nd floor are frame 100 mm (without heat and sound insulation); plasterboard covering.
• Reinforcing belt - 150x200 mm external walls, 150x100 mm partitions.
• Reinforcement - every third row is 8 mm reinforcement class A3 (corrugated).
• Openings - hot-rolled angle 50x50x5 mm for supporting blocks.
• Subfloors - edged board 20-22 mm.
• Finished floors - 36 mm tongue and groove board (kiln drying).
• Plaster and putty - all block walls (indoors).
• Indoor wall decoration - vinyl wallpaper.
• Wall finishing in bathrooms - plaster, putty, tiles.
• Ceilings - stretch (matte or glossy).
• Attic gables - OSB-3 slab 9x1250x2500 mm on the outside.
• Rafter system - timber 40x100x150 mm; sheathing made of boards 20-22 mm.
• Roofing - metal tiles (color to choose).
• Drainage system
• The facades are finished with facing brick (red, yellow, brown to choose from).
• Window - double-glazed windows; low tide, window sill and mosquito net.
• The entrance door is metal, cashed with fittings.
• Interior doors are paneled and cashed with fittings.
• The staircase is wooden with carved balusters.
• Vapor barrier - Ondutis or analogues (2 layers: floor of the 1st floor, 1 layer: under the roof).
• Insulation - 100 mm KNAUF or analogues (floors, ceiling, attic).
• Heating - heating panels
• Electrics - wiring around the house, switches, light bulbs, for every 5 linear meters. meters of premises: socket.
• Plumbing - connection to the water supply source (up to 5 m), wiring throughout the house: cold/g. water and sewerage.
• Bathroom - toilet, shower or acrylic bathtub, hanging water heater tank.
• Septic tank - 2 sections with connection (up to 10 m from the house; distances above are calculated separately).

Construction from foam concrete

Small-sized architectural forms, which include the design of a 6 by 6 house made of foam blocks, are quite in demand in the private sector when developing a site. In fact, with such sizes it is possible to implement many designer ensembles, but our goal is not decoration buildings, but the construction of the foundation along with the frame.

Foundation

• The most common types of foundations for houses made of foam blocks are pile (in rare cases columnar) and strip (monolithic or prefabricated). We will turn our attention to the best-quality option, a monolithic tape, and will briefly examine the principles of its installation and the required amount of materials for filling. To mark the site, we will need a plan of the house or its 1st floor, which is located above, in order to create a zero cycle for load-bearing walls and partitions.
• Let’s assume that on the site being built we have non-heaving soil, then we will make a shallow foundation, 60 cm from the base to the ground level and the tape will protrude 40 cm above the surface as a plinth. We will make the tape thickness 0.5 m, but we will have to dig a trench at least 0.8 m deep, leaving 20 cm for a sand (or crushed stone) cushion. Now, based on the plan of the 1st floor, let's calculate the total length of the trench.
• So, we need a foundation for a 6 by 6 house made of foam blocks, but in addition to the square on the plan, we have a protruding terrace and partitions under which we will need to pour strip lintels. This means that our entire trench will be: 6*4+3*2+1.5*5+1+0.5*2=39.5 linear meters. Now you can find out the amount of concrete; for this we need the total volume of the tape: 39.5/1.0*0.5-19.75 m3.
• In the same way, you can calculate the number of components for concrete mixture, for example, we will use the popular brand of concrete M 300, then for one cube we will need 385 kg of M 400 cement, 1080 kg of crushed stone or gravel, 705 kg of coarse sand and approximately 220 liters of water (it all depends on the moisture content of the fillers). Everything else is somewhat simpler, since we know the cubic capacity of the tape, then 19.75 * 385 = 7603.75 m3 of cement will be used; crushed stone – 19.75*705=13923.75m3; sand – 19.75*1080=21330m3; water approximately 19.75*220=4345l. You will also need sand for the pillow, which is 39.5 * 0.2 * 0.5 = 3.95 m3.
• For a metal frame with a strip foundation, reinforcement with a cross-section of 10 to 16 mm is usually used as longitudinal load-bearing rods, but given that 6 by 6 house designs made from foam blocks are quite light, the instructions allow using a diameter of 12 mm. This means that we will need 39.5 * 4 = 156 m of longitudinal load-bearing supports (two rods each at the upper and lower levels), and if we take into account that each profile has 6 m, then 156/6 = 26 rods.
• For lintels, you can use corrugated or smooth-walled reinforcement with a diameter of 8 to 10 mm. With these tape sizes optimal sizes the frame will be 3075 cm, which means that the vertical jumpers will be 0.8 m each, and the horizontal ones will be 0.35 m each and the ring will be 2.5 m in total. If we make them step by 0.5 m, then we will need 39.5/0.5 * 2.5 = 197.5 m or 197.5/6 = 32.9 or 33 pieces
• The reinforcement is connected using soft steel wire and it is knitted with your own hands, but for this they use a variety of devices - pliers, screwdrivers and even special guns, but the most popular remains a hook with a bent rod ground into a cone. Each joint requires about 0.5 m of wire, and we have a total of 39.5/0.5*4 = 316 joints, which means we will need approximately 316 * 0.5 = 158 m of soft wire.
• Advice. On water-saturated soils, it is better to make a cushion under the foundation tape from crushed stone or gravel, or pour two layers of 20 cm each - sand and gravel. If necessary, the tape must be equipped shut-off waterproofing or even a drainage pipe, digging it at the level of the sole with a slope of 1 cm/1 m at a distance of 1.5-2 m from the foundation.

Walling

• After building the foundation, we need to make a floor and reinforced concrete floors are perfect for this, as can be seen in the top photo. Considering that we have a 6x6 house made of foam blocks with a terrace, we will need two types of PC 60-12-8 (5980x1190x220 mm) slabs - 5 pieces and for the terrace ledge PC 30-12-8 (2980x1190x220 mm) - 1 piece. But exactly the same ceilings are suitable for the ceiling, which means the whole set needs to be multiplied by 2 and we get PC 60-12-8 (5980x1190x220 mm) - 10 pieces and PC 30-12-8 (2980x1190x220 mm) - 2 pieces.
• Now let's look at several types of masonry and the number of blocks that will be consumed if they are laid in one way or another. For load-bearing walls, we will take a foam block 200x300x600 mm and try to raise the wall in two ways - with a whole stone and half a stone. Solid stone laying involves placing the block on the bed, poking in and out of the house.
• Let's take 2.8 m as the design height (together with the seams it will be 2.87 m) and find out the total area of ​​the load-bearing walls, it will be Swalls = 6 * 3 + 1.5 * 2 + 3) * 2.8 = 67.2 m2. If the masonry is carried out in one whole stone, then we will need another area of ​​the butt, and this is Stitch = 200 * 200 = 60000 mm2 = 0.06 m2. In this case, for all load-bearing walls when laying in whole stone, you will need Swalls / Stick = 67.2 / 0.06 = 1120 pieces.
• Also, 6x6 house projects made of foam blocks (load-bearing walls) can be carried out using half-stone masonry, which, of course, will reduce thermal insulation, but material consumption will be significantly reduced, and someone may consider it quite reasonable to argue that a thermal barrier can be installed separately. Half-stone laying involves placing the block on the bed, with the spoons facing outwards and inwards of the house.
• We already know the area of ​​the load-bearing wall, now we find out the area of ​​the spoon, and this is Slozhka = 200 * 600 = 60000 mm2 = 0.12 m2. Thus, we can find out the number of blocks for all load-bearing walls and this will turn out to be Swalls/Spole=67.2/0.12=560 pieces. As you can see, the number of foam blocks turned out to be half as much and if for insulation you use, for example, mineral wool and cover it with siding, then the price for all the work in the second case will be more profitable, besides, the first option remains without cladding for the same money.
• We continue to consider the project of a house made of 6x6m foam blocks, in which we need to build partitions, but we will do this with a quarter of a stone and use a different size of blocks for this - 600x300x100 mm, which is quite acceptable inside the apartment. Of course, you can put other sizes, but for the example we will use this one. Quarter stone laying means placing the block on a spoon, with the beds facing to the sides, and butts end to end.
• If the total length of our walls is 6 * 4 + 3 * 2 + 1.5 * 5 + 1 + 0.5 * 2 = 39.5 m, and the length of the load-bearing ones is 24 m, then we have 39.5-24 = left for partitions 15.5 linear meters. The area of ​​all partitions will be S partitions = 15.5 * 2.8 = 44.24 m2, and the area of ​​the bed S bed = 600 * 300 = 180000 mm2 = 0.18 m2. Now we find out the total number of blocks - S partitions / S beds = 44.24 / 0.18 = 245.7 or 246 pieces.

Design

Any design organization has its own ready-made designs for houses of any size, adapted for a given region. If any of them suits you, then it will cost much less than what you will have to develop “from scratch.”

What should be in the project

Since you are going to build a residential building from 6×6 aerated concrete for year-round use, the package of documents must include a technical section with communications laying diagrams:

• Heating;
• Water supply;
• Sewerage;
• Electricity supply.

In addition, the design of a 6x6 aerated concrete house must contain information about the exterior and interior decoration. This is important, since this material, which has excellent heat-saving properties, loses them when saturated with moisture.

Therefore, first of all, after the completion of the main construction, the house is finished on the outside to protect the walls from precipitation and humid air.

Where to “grow”

This issue is usually decided based on the size and shape of the plot and the needs of the family.

• If the land plot is small or narrow, it is more logical to build the house upward - this way it will take up less space.
• If the plot area is large, and there are elderly people and small children in the house, it is better to “grow” in breadth.

But there are some nuances associated with remodeling the roof. The cost of such alterations is usually quite significant.

Of course, in the future it will be easier and cheaper to add a couple of rooms to the house, extending existing roof to the annex. There is no way around the second floor, since the roof will have to be completely removed and then reinstalled.

In your case, we can recommend the third option. Namely, to build a one-and-a-half-story house right away. To do this, you will have to raise the external walls by only a meter and a half, which will not greatly affect the rise in cost.

The advantages of this option are obvious:

• Spending a little more money now can save you big money in the future.
• In a few years you will not have to make an opening in the ceilings or a door in external wall, disturbing the decoration of residential premises.
• You don’t have to finish the second floor yet and don’t have to spend money on stairs. And in its place for now there will be a small bedroom.

Features of construction from aerated blocks

About the fact that aerated concrete is losing its positive properties when wet, as already mentioned. This must be remembered during transportation and storage of the material.

In addition, the instructions require taking into account other features of the material:

• When building with aerated concrete blocks, it is advisable to make thin joints. This material, like all cellular concrete, has high thermal resistance. And thick cement joints reduce this indicator in finished walls by tens of percent.
  For reference. Manufacturers of aerated concrete recommend using special glue and tools for laying blocks, which allow reducing the thickness of the seams to 3-5 mm without losing the quality of installation.
• This material is very vapor permeable, which puts it on par with wood in terms of comfort of living in such a building. But only if the water vapor generated in the house will freely escape outside without accumulating in the walls. Therefore, the interior and exterior decoration must be thought out so that the vapor permeability of each layer increases outward. Or it is necessary to design good supply and exhaust ventilation.

Solving the housing problem usually involves big expenses. But modern materials can significantly reduce them without sacrificing the quality of housing. Aerated concrete is one of these materials.

An example of calculating the required number of foam concrete blocks

Having decided to build a house from foam blocks, you need to decide on the amount of material required for this. IN in this case making calculations is much easier than when constructing a building from another building material, be it brick or wood.

Foam blocks are large in size, stacked in one row, like children's cubes, therefore, knowing the size of the house that you are going to build, and the sizes of these “cubes,” you can easily count with very high accuracy and order exactly as much as you need. This will allow you to avoid overpaying for extra materials and their delivery.

The length of the house is 6 meters, width – 6 m. Height – 3 m.

The perimeter of the house is 24 m (6x4). The total area of ​​the walls is 24 x 3 = 72 square meters.

We calculate the area of ​​windows and doorways. Let us (conditionally) have 5 windows (let’s take standard, plastic ones). Two windows on the facade of the house measuring 1770x1460mm, and 3 windows measuring 1470x1460mm.

We multiply all these numbers, add them up and get that the total area of ​​​​all windows will be 11.6 square meters. m. Since we calculated the area of ​​the windows themselves, and the window openings should be slightly larger, we can safely round this figure to 12 square meters. meters.

Standard steel doors dimensions 99 x 208 mm require a doorway measuring 102 x 210 mm. Thus, the area of ​​the doorway is 2.142 square meters. m. (rounded to two).

So, the total area of ​​the walls minus the openings for windows and doors will be: 72 – 12 -2 = 58 sq. meters.

Material characteristics

A small building in the form of a miniature country dwelling, technical room, workshop, garage is a 6x6 house made of foam blocks. People like to build such buildings because of their positive characteristics. The most important among them will be:

• absolute safety for health;
• light weight;
• affordable price;
• excellent quality;
• ease of construction of any structures.

Expert opinion

Filimonov Evgeniy

Professional builder. 20 years of experience

Ask a question to an expert

The small area of ​​the building in question allows it to be erected in a short time. This does not require special skills in the construction field.

The final result of the construction of the object will depend on the originality of the project and the features of the architectural complex.

Using a minimum amount of building materials, a fairly spacious building is created, convenient for permanent residence. It can accommodate up to 3 people at the same time. Such houses retain heat well, do not allow extraneous sounds to enter the room, and are not afraid of dampness.

As a result of using foam blocks and aerated concrete, a lightweight version of the house is obtained. The materials under consideration have similar features: the first version of the product is produced using concrete. The resulting air bubbles are located in the cavity of the material itself, inside.

The second option is associated with the active inclusion of aluminum chips in the production. They actively interact with oxygen, heat up and release gas.

The foam block has a softer base and a high degree of moisture resistance; its cost is much lower than that of aerated concrete. These cells, unlike foam blocks, are of the open type, ensuring active interaction of air bubbles.

Aerated concrete is produced industrially and thoroughly dried in an autoclave. Its geometry is impeccable, which ensures a high-quality masonry process and faster work.

Features of building houses from foam blocks

A house made of 6x6 foam blocks has some unique construction. Thus, at the time of drawing up the project, measures should be taken to protect the material from the harmful effects of nature. In the process of such influence, the blocks quickly become unusable.

If measures are not taken in time, the walls will crack and cold will pass through the resulting holes. One of the available techniques that allows timely protection from external influences is to limit air access to the base. For such purposes, the surface is plastered.

Recommendation! To build a house from foam blocks, it is important to take care of the correct ratio of the thickness of the layers on the outside and inside. Moisture and air should not pass through such a shell. If the necessary conditions are not observed, the walls may warp and become unusable, and fungi and mold will quickly appear from the inside.

Cinder blocks can bring another nuisance: when a structure is built to a height of more than 2 m, the wall may fall or completely collapse. Such phenomena can be observed as a result of incorrect calculations or hasty actions of builders. At the time of completion of work, it is important to finish the walls outside and inside due to the fact that foam concrete bases do not have a very beautiful coating, which requires adjustment.

As exterior finishing Almost all building materials are suitable for foam concrete floors, because these products are soft, which allows you to install any cladding on them. It could be facing brick, siding, wood, clinker tiles, drywall, thin-walled plaster.

Traditionally, for the installation of such houses, not cement is used, but glue, which is very economical. Just 3 mm of the applied composition will ensure reliable adhesion to the surface.

To build walls made of foam blocks, you should use the following devices:

• Master OK;
• level, plumb;
• mallet;
• sanding paper;
• material;
• cement and sand.

Installation stages

Preparation.

The construction of buildings made of slag concrete involves not only installation work, but also surface preparation.

First, a plan is drawn up, with which you can easily determine the number of products used. The project will help identify those areas that cause certain difficulties during the installation process, distribute communications, windows and doors in the right sequence.

Next you can buy materials and insulating coatings. After this, you should prepare the soil: dig a pit the right size under the foundation. If there are loose soils on the site, it is necessary to build a pile support.

Recommendation! When choosing between a cement mortar and an adhesive one, it is important to understand that the second option is distinguished by a thin layer and good adhesion to the surface. As a result of using this composition, the appearance of cracks is reduced to zero.

Construction of the foundation.

Foundation for small house looks like pillars built of brick. Logs are placed on top of them, after which the subfloor is laid. It is not recommended to use cinder blocks to construct such supports.

Considering the fact that a house made of foam blocks has a small area, and besides, the material itself is lightweight, strengthening the foundation in this case is not required. A 40 cm wide strip support without reinforcement will be sufficient.

Here it is important to make a sand embankment 30 cm high for the foundation. The support of the structure itself should be located at a depth of 5 cm below the soil freezing line. So, for a building 6x6 m, the optimal option would be 70 cm. This work is carried out during the day.

Before starting construction work, you should study the uniqueness of the soil of the area. Such activities will allow you to choose the correct construction method and the necessary building materials. After constructing the foundation, it should dry out within 2-3 months, after which you can begin building walls. Here it is very important to ensure the evenness of the first rows, which will facilitate further work.

Construction of walls.

The recommended wall thickness is 30 cm; one row of blocks will be enough to provide the building with heat. This material should be laid immediately on a finished foundation, covered with a layer of roofing material and leveled with cement mortar.

Expert opinion

Filimonov Evgeniy

Professional builder. 20 years of experience

Ask a question to an expert

Attention! The installation process begins from the corners of the structure

To begin with, the highest point is selected, and the first row of blocks is laid out on it. Focusing on it, a cord is pulled along which the following blocks are aligned. The flawlessness of the coating is periodically checked by a level. The cement mortar is placed on the base and on individual parts of the product. Excess composition is removed using a mallet. Defects and uneven areas are sanded with special paper. Debris and dust after such finishing should be thoroughly swept away.

When approaching the construction of load-bearing walls, it is worth noting that their height will be 3 cm lower than other structures. This will help to significantly reduce the load on them. Existing gaps are covered with plaster.

A skillfully selected layout will help reduce the number of load-bearing walls in the building or will contribute to the complete abandonment of them.

Since the area of ​​the house is small in size, the openings must be made of appropriate sizes. They are often finished with wood. Do not forget that this material is plastic and easily changes under the influence of external indicators. Therefore, the end parts of their beams must be insulated from moisture.

Roof construction.

This important stage of work cannot be saved. The roof must be erected in accordance with construction rules with high-quality ventilation. Among modern materials convenient for roof covering, ondulin is suitable. It is inexpensive, strong and visually attractive.

A house made of foam blocks has quite strong walls. They can easily withstand the mass of roofing rafters made from any raw material. For such roofs, waterproofing and insulation measures are carried out. The ceilings between floors are made of wood. Concrete plates are not used here due to their heavy weight, which can lead to breakage of the walls.

Exterior finishing.

The construction of foam block houses ends with the cladding of the building.

The following materials are used for this finishing:

• plaster with special compositions intended for foam blocks;
• siding with a layer of mineral wool;
• facing brick;
• natural and artificial stone;
• high strength composite panels.

As materials intended for interior decoration, apply:

• plaster;
• wood paneling;
• drywall.

Any type of finishing materials can be attached to cinder block walls; their walls are soft and easy to drill. To make a hole for switches and sockets, take an electric drill and a special attachment for it.

Construction of reinforced houses

In the process of building small-sized houses, a unique technology is used. It comes down to the fact that reinforcement is not required here. When constructing large buildings, everything is different. In this case, you simply cannot do without it: the blocks will not be able to withstand heavy loads, as a result of which the walls may crack.

Construction technology under consideration small houses will allow you to create a structure that will delight you with warmth, coziness and comfort at any time of the year.

Based on site materials: fb.ru, master-rus.ru, openoblokah.ru, beton-house.com, stroy-materialy.com, ostroymaterialah.ru

Some people give their money to developers so that they can build a country house on their site, while others prefer to purchase ready-made structures such as country houses made from block containers. But there are also summer residents who want and can do everything with their own hands, from the project itself to the construction process.

Consumer qualities of building materials

Many people know about the existence of such a thing on the market. modern material, like a foam block, and reviews about it are mostly positive. In this article we would like to talk not only about the advantages of this material, but also about its application in low-rise construction on suburban areas, or rather about what small projects can be country houses from foam materials.

In order to use lightweight blocks in construction, it is imperative to familiarize yourself with them technical characteristics in order to create original design solutions based on these parameters.

What is a foam block

We will try to highlight the most important properties of light blocks that will form the basis of the future structure. Foam block is a building material created on a base of lightweight concrete with a cellular structure.

For the production of these materials the following is used:

• Ordinary cement solution;
• Water;
• Sand;
• Foaming agent.

The weight of the product can be about 25 kg, and the average block size is 600/300/200 (mm).

Note!
In terms of strength parameters, cellular material is inferior to many others building blocks, but, nevertheless, it is used quite widely, and the scale of such construction is only gaining momentum.

What can be built from blocks

Foam concrete can easily be used in almost any type of construction.

As already noted, this material has low strength, which is not enough for load-bearing structures, but it can be used to build:

• Non-residential premises(garage, basement gazebo);
• Residential cottage ;
• Residential house with attic;
• Two-story building subject to a reinforced concrete frame.

Advice. If you plan to strengthen load-bearing walls, then the design of a 6x4 country house, for example, may include more than one floor.

What influences design

When choosing foam block as the main building material, you should understand that the design of a 5x5 country house should be developed strictly for it.

Let's look at the main factors influencing the design:

• If your suburban area has enough large area, then you should opt for a one-story building;
• The small area of ​​the site is a clear indication that additional living space can be obtained using an attic;
• Also instructions for choosing one of the standard projects country house provides for taking into account such factors as the number of residents;
• Possibility and necessity of the device ground floor or basement;
• The need for a garage and its arrangement separately or as an extension;
• Type heating system, on which the choice of thermal insulation material will depend;
• Type of roofing materials.

Advice. Do not lose sight of the fact that foam blocks, in addition to low strength, are lightweight and have high insulation properties. The foundation for such a structure must be adequate and inexpensive.

The most simple options What remains are projects for a small do-it-yourself country house on one floor, since they do not require either powerful foundations or additional insulation of the walls, which significantly reduces such a parameter as the price. The absence of a second floor and ceiling guarantees light loads.

In addition, if you decide to build everything yourself, a one-story building will be much easier for you, and its roof is simple.

Note!
If your area often experiences prolonged power outages, then a service such as renting a diesel generator for your dacha can help you out.

Design nuances

The number of floors of a country building certainly depends on the wishes of the owners. After all, for example, a cottage house with dimensions of 5x6 will take up very little space on the site, but the useful living area of ​​such one storey building very small.

The construction of a second floor can significantly change the parameters of the living space, thereby ensuring comfortable living.

It should also be taken into account that not the entire area is residential; there are rooms such as a bathroom, kitchen, storage room, etc. Thus, precious meters are also spent on the needs of technically important rooms. This means that such a structure must certainly have an attic or full second floor.

Now that we have sorted out the quadrature, we should pay attention to the cladding and insulation. Although foam blocks themselves are endowed with excellent insulating parameters, they are not aesthetically attractive appearance, therefore, the issue of finishing material should be resolved.

Options facing materials quite a lot and the choice must be made at the design stage, because some of them can weigh quite a lot, and this must be taken into account when calculating.

If you nevertheless decide to provide an additional insulating layer, this must be taken into account when calculating the heating circuit. After such calculations, the price for the heating system may decrease significantly.

In conclusion

Having chosen or developed a project for a 4 by 4 country house or any other size, the construction process itself will not be special labor. The technology for the work is quite simple and building a house will not be difficult even for craftsmen who do not have deep knowledge in this field.

The main thing in this matter is to comply with the design requirements and recommendations of the builders. And the video in this article will help you find many additional and useful information on this topic.

Projects country houses from foam blocks and their difference from projects brick houses. A 6x6 house made of foam blocks has several features. When designing, it is necessary to take measures to protect the foam block from the effects of precipitation and aggressive environments - unfortunately, foam blocks are very quickly destroyed when exposed to them.

Bathhouse made of foam blocks: pros and cons

Read more: Concrete and concrete blocks(go to section).

Is it possible to build a bathhouse on your own property from foam blocks?
- Can!

Is it advisable to do this?

Not everywhere.

Of course, where it is easy and simple to find wood, you can’t think of anything better than a wooden bathhouse with a steam room or sauna. But where there are problems with this material, you can also build from foam blocks, since construction brick bath will cost much more and not everyone can afford it.

Concrete in this case is much more profitable (see calculations for a house made of foam blocks). Let's look at the main pros and cons of this solution.

Steam roomBaths are built from foam blocks, despite the fact that there is a document (“Methodological recommendations for the design of baths and bath-health complexes”).

Its clause 5.2. states: “The use of silicate hollow bricks, lightweight and cellular concrete and other moisture-intensive materials is not allowed.”

But, firstly, this document regulates the construction of public baths, not private ones, and, secondly, it was adopted quite a long time ago, in 1989.

And since then, a lot of completely new finishing and waterproofing materials have appeared, the use of which makes it possible to avoid large amounts of moisture getting on foam concrete walls without any problems.

House made of foam blocks - design features

Exist different kinds cellular concrete (foam concrete, aerated concrete, expanded clay concrete, polystyrene concrete) which are used in the form of blocks. One block replaces 17 bricks, so construction is accelerated several times.
The advantages of a house made of foam blocks: low cost, speed of construction, good thermal insulation, the foundation is cheaper than for a brick house.

Disadvantages of a house made of foam concrete: each type of foam concrete has its own advantages and, of course, disadvantages (which, however, may not appear with the proper level of work and high-quality blocks). Gas silicate absorbs moisture well and then cracks; in addition, you need to make sure that there is no moisture inside the house - the house cannot be faced yet heating season it won't dry out; foam concrete is sensitive to freeze-thaw cycles; in addition, it will not hold grates and iron doors; polystyrene concrete is sensitive to sunlight and is vapor-tight, which means you will have to think about ventilation. Among the general disadvantages: a non-zero probability of getting low-quality blocks that do not correspond to the declared characteristics, as well as the possibility of cracks throughout the house in case of soil subsidence.

Any construction begins with the fence and the actual design of the house and communications on the site. Let's draw the house of our dreams on paper, figure out what we should build it from, compare prices for materials, call a bunch of stores and find out prices for construction materials, visit construction markets. Plan construction so that if you suddenly run out of money, you can fully live in the house and, as you earn money, complete what you have planned.

Also remember that the cost of building a house will ALWAYS be 15 percent more than you plan. This is the law of construction. And nothing can be done about it. I chose a 2-story house made of foam blocks with a garage, hallway and balcony. It is drawn on this page. This is the most acceptable option, and I realized this after much thought, is a comparison of the cost of materials and my capabilities, heat capacity and the beauty of the facade. In terms of usable area, comfort, etc. And if suddenly for some reason I can’t pull it off right away, then I’ll build a house first , then I’ll add a garage with a balcony. It won’t be too difficult. You can leave the car on the street for a while, and instead of the balcony you can go out onto the site and just walk around, looking around your property. In order not to bother too much, by the way, I bought the project in one office, which I found on the Internet. This is a standard project that has already been built several times and has passed all tests. All flaws and shortcomings during its construction have been eliminated and corrected. And if something is done in the process, you can always correct it. Note that the project will also definitely be needed after that how do you build to “put the house into operation” and to obtain a building permit. You cannot build a house without a permit, because then you will have to pay a fine. So you have received a permit, you have a project, you have found workers who will build. Yes, a few words about workers (those who will build). Where to find them and how much it will cost. Or maybe it’s better to enter into an agreement with a company that is engaged in construction?
Maybe it’s better, but the house will cost you exactly 2.5 times more. And they have greater demands than the workers you hire yourself. So we’re going to look for workers. I would suggest you go to the Kiev station, write a sign in advance that you’re looking for they say workers for the construction of a dacha. Payment immediately! A lot of Ukrainians come to the capital to earn money. Most of them have extensive experience in construction. They have built more than one house and made hundreds of repairs. You need to agree on the cost of the work right away. Feel free to bargain and bring down the price. Do not agree to pay them a daily salary.

Only a certain amount after the completion of the work. Thus, I hired to erect a box with a roof + put up a fence + dig a well in 2 rings + dig a trench for a water pipe (future later) + all the unloading work of the material I brought - for $ 2000. This is a normal amount If we add to this the fact that they also built a nice house where they will live during construction and attached a wonderful shed to it for storing building materials. I will then turn it (the house) into either a barn or a bathhouse.

You just need to insulate it because it is a panel house and cover it with siding or clapboard blockhouse. And at the intermediate stage of construction, at my big request, they laid out a fireplace for me (because during this time we became a little friends). And it’s free, although the fireplace costs about $700. So the amount for construction is completely normal. Next, I will talk about how construction began and what specific costs began to appear.

Do-it-yourself foam block laying, pros and cons

When choosing a building material for building your own home, pay attention to the characteristics of environmental friendliness, sound and heat insulation, durability, ease of installation, and structural strength. Foam concrete satisfies many parameters for the construction of residential buildings. It is becoming more and more in demand. Construction from foam blocks is now carried out at a rapid pace. If you choose to build a house from foam blocks as a building material, then you need to have knowledge about the features of its masonry, characteristics, ease of installation and the pros and cons of the material.
One of the huge advantages of this material is its environmental friendliness. Foam concrete is made from cement, water and sand; dyes and plasticizers can be added to the composition, but in a very small amount. A foam concrete wall can breathe, while creating a favorable environment. This material is very economical; in comparison with other building materials, its price is very low. However, it has an important characteristic, namely lightness. This characteristic greatly speeds up installation time and allows you to avoid on our own without resorting to technology. A foam block house is erected very quickly within two to three months. In addition, the lightness of the walls will reduce the cost of the foundation.

For a lightweight structure, there is no need for a powerful and expensive foundation, for example, a slab foundation. Possessing excellent heat and sound insulation, it will reduce the cost of materials for insulation and heat preservation. Due to its properties, this material perfectly withstands large temperature changes; it can be used both in the north of the country and in the southern regions. Another positive side is the possibility of finishing rooms built from foam blocks with any materials.

Foam blocks also have certain disadvantages, like any building materials, for example, one of the main ones is insufficient strength. Foam blocks can be easily damaged during transportation and during construction. Walls may crack during shrinkage and weathering, even after the frame of the house is erected. In order to avoid such problems, it is necessary to invest certain funds in reinforcing the material. And after the process of building a house is completed, it is advisable to decorate the foam block outside the room with any materials. Otherwise, there may be a risk of carbonation shrinkage, which occurs if chalk appears inside the material.

This change in structure will occur due to the reaction of the cement and the carbon dioxide. The best material For finishing, in our opinion, the foam blocks will be faced with bricks. Cladding is much cheaper than building a house entirely from brick. Brick will ennoble and also protect the structure from adverse environmental factors. environment. A house made of foam concrete and brick lining will be the most the best option for a country house.

The foam block is very easy to process and give it non-standard forms. This can be done using a regular saw. You can also install fasteners into the foam block and make an unusual artistic composition. Foam blocks are designed to last approximately 70-90 years. During the construction of a house made of foam block, it is advisable not to use cement-sand mortar. It will not have the best effect on the cost of masonry, thermal insulation properties And external view. It is recommended to lay the blocks on a layer of special glue, first treating the surface with water. Glue is sold in any hardware store in the country.

Advantages of projects of one-story houses made of foam blocks

Less load on fragile foam blocks - by lowering the number of storeys in a foam block house, the need for an interfloor ceiling that rests on the foam blocks and transfers loads to them disappears;
The consumption of structural bricks is reduced - foam block is a fragile material, and it is not recommended to rest structures on it without additional auxiliary materials. Very often this occurs in places of support reinforced concrete slabs and beams, where the support occurs through the brick;
A lower load on the foundation is a relative plus... since while maintaining the same area as a 2-story house, the length and area of ​​the foundation increases, but in contrast to this there is a reduced load of the foundation, which will save on foundation material;
Less consumption of material, that is, foam block, allows you to save material, but not so much, since the perimeter of a one-story house increases;
The cost of construction and installation work is becoming less - as a rule, when drawing up estimates for the construction of a house made of foam blocks, the cost is taken into account depending on the height and complexity of the masonry;
In respect of engineering systems more profitable (they say))) - from a heating point of view, that is, reducing heat loss by reducing levels (ceilings), the number of windows and doors;
If you know anything else, add it in the comments))) I’ll be glad...

The advantages are of course good, but what if your neighbor builds a house with 2 floors, then the desire to build a down-to-earth and comfortable one-story house disappears somewhere... I want to build even higher))) this is probably why buildings above one floor predominate in our country.

Pros and cons of a foam block house

Now, on the construction market you can find a lot of materials for construction. If earlier they built from brick or cinder blocks, now materials have appeared that are in no way inferior to the brick we are used to, but have best characteristics. For example, foam block, it appeared on the construction market not so long ago, but has already taken its strong place. Foam blocks, like any other material, have their positive and negative sides, which we will now consider.
Positive aspects of a house made of foam blocks

1. Construction of a house from foam blocks is faster than from brick or analogues.
2. At cost, less money is spent on material.
3. Foam blocks have excellent strength and low density.
4. Houses made of foam blocks retain heat well, this is due to the low thermal conductivity and high heat capacity of the foam block.
5. The foam block itself is quite light, so the load on the foundation is small.

These are just the main positive aspects of the foam block, from which we can say that this material is lightweight, can retain heat well in the house and is inexpensive. But it also has negative sides.
Negative aspects of foam blocks

1. It is imperative to do waterproofing in houses made of foam blocks.
2. A house made of foam block must be well insulated, since the foam block will not withstand severe frosts.
3. A house made of foam blocks takes a long time to warm up, but the heat in it lasts just as long.

If we compare the pros and cons of foam blocks, we can say with confidence that this material is perfect for building houses, but certain conditions must be met to make the house warm and comfortable.

How to build a 6x6 house?

A 6x6 country house made of foam blocks has several features. When designing, it is necessary to take measures to protect the foam block from the effects of precipitation and aggressive environments - unfortunately, foam blocks are destroyed very quickly when exposed to them. Untimely protection can lead to cracks appearing in the walls, through which cold bridges will form in winter. In addition, you should allow time for the solution to gain strength. The cinder block has one insidious feature - when laying walls to a height of more than 2 m, the wall can begin to “float”, fall to one side and collapse. This is especially noticeable on load-bearing walls loaded with floor slabs. The reason is the incorrect calculations and haste of the builders. Two-story house made of foam blocks 6x6 m Description * monolithic foundation, foundation depth 700 mm, monolithic base height 600 mm, foundation width for a house 6x6 - 400 mm * foundation waterproofing - liquid glass* logs, floor beams and rafter system from timber 50*150 * subfloor and sheathing 25*150 * walls h 2400 mm, foam block 200*300*600, wall thickness 200 * gables foam block 200*300*600, thickness 200 * roof covering- roofing felt, finishing coating either ondulin or otsyu corrugated sheet * metal window and door lintels * windows plastic profile Krauss, metal entrance door. * wooden floors, ceilings and partitions on the second floor - lining Cost of the house: 750,000 rubles. There are a lot of options for finishing houses made of foam blocks. This can be external finishing such as siding, plaster, brick cladding, clinker tiles. Or types of interior finishing such as plasterboard, wood paneling, plaster. The variety of windows and doors is also huge.

Properties and advantages of foam concrete

Foam concrete (light cellular concrete of non-autoclave hardening), as a building material, has recently gained one of the leading positions in energy-saving construction technologies. The production of foam concrete requires the use of special, but not expensive, equipment. Foam concrete blocks are becoming an indispensable building material, due to their low specific gravity and very low thermal conductivity, for thermal insulation of attics of buildings, hard and soft roofs, floors, especially on the first floors of buildings. It is also indispensable for insulating well-type walls, filling the entire volume completely; foam concrete does not form voids. To level surfaces under floors, instead of expanded clay concrete, foam concrete is also used, simultaneously performing several functions: thermal insulation and sound insulation.
High thermal insulation properties: The porous structure of foam concrete retains heat well and does not allow cold to pass through, which makes it structural and thermal insulation material. Thermal insulation of walls from foam concrete block 3 - 3.5 times higher than that of brick wall. The heat transfer coefficient of foam concrete D700 is 0.23 (Kcal/m²h), and that of clay brick is 0.8 (Kcal/m²h).
Lightness: Compared to other building materials, the weight of a foam concrete block is several times lighter, for example, expanded clay concrete is three times heavier than a D700 foam concrete block, which significantly reduces transportation and installation costs.
Strength: The compressive strength of foam concrete is quite high (3.5-5.0 MPa) with a low bulk density. Using D900 foam concrete as a building material for load-bearing walls, it is possible to erect a building three floors high. But some design solutions make it possible to use foam concrete in high-rise buildings without limiting the number of floors.
Frost resistance: The fine-porous structure of foam concrete provides a reserve volume for the migration of water when it freezes, which gives high frost resistance F50 - F100 to this material.
Fire resistance: In addition to the fact that foam concrete is a non-combustible material, it can withstand one-sided exposure to fire for at least 5-7 hours.
Biostability and environmental safety: Structures made of foam concrete are not subject to rotting and aging. The fact that foam concrete is made from environmentally friendly raw materials ensures that foam concrete products are completely safe for humans. The average specific activity of radionuclides (75.5 Bq/kg) does not exceed the standardized value (370 Bq/kg).
Wide range of obtained densities: Taking into account the purpose of foam concrete products and their operating conditions, it is possible to produce foam concrete with a density:
- from 400 to 600 kg/m³ for the production of thermal insulation products;
- from 700 to 1100 kg/m³ for the production of thermal insulation and structural products (blocks, slabs, lintels, etc.);
- from 1200 to 1600 kg/m³ for the production of structural products.
Ease of processing: This important property of the foam block allows you to easily and quickly implement your ideas with the simplest tools, because it is easy to saw, drill, chip and nail.

Plastering walls made of foam concrete

Foam concrete is protected from carbonization and moisture shrinkage (from the formation of cracks) by limiting access to atmospheric air. The most affordable measure to protect foam concrete is plaster. But with plaster you can either fix it or completely ruin it. general characteristics walls: thermal conductivity, vapor permeability, frost resistance, condensation phenomenon, physical and mechanical characteristics.

For walls made of foam concrete, aerated concrete and other vapor-permeable building materials, the vapor permeability of the plaster, the thickness of the plaster and the ratio of the thickness of the outer and inner layers of plaster are important. In such walls, the plaster is a layer that prevents the penetration of steam and air, and therefore it is necessary to ensure that the amount of steam that entered the wall of foam blocks through the internal plaster fully exits through the external plaster. In this case, the walls “breathe”; steam does not remain inside the wall or under the outer layer of plaster. Otherwise, steam, after several freeze-thaw cycles, becomes the main cause of cracks and layer falling off external plaster, and moisture and mold appear on the inner layer of plaster.

If there are no exact thermal calculations, you can use the old rule experienced craftsmen- in order to ensure the conditions under which façade walls can “breathe”, the recommended thickness of the outer layer of plaster should be half that of the inner layer (for example, if the outer layer of plaster is 20 mm thick, then the inner layer of plaster should be 40 mm thick).

Walls made of foam blocks do not need a thick layer of plaster - the thickness of the outer layer of plaster is sufficient - 5-10 mm, and as a result, the inner layer can be 10 mm - 20 mm thick.

Unlike walls made of other materials, in which the plaster dries in such a way that half of the moisture is transferred outside and half inside the wall, walls made of foam blocks do not absorb moisture, and the plaster dries completely to the outside. Therefore, it dries longer and makes it possible to accurately level (grout) the layer.

plaster on blocks produced using cutting technology holds up better, because they have a rough surface. Blocks produced by casting into molds are recommended to be cleaned or sanded to remove the top hydrophobized layer.
Also, for plastering cast foam concrete, it is recommended to use plaster mixtures with higher adhesion than for conventional surfaces, because plaster does not adhere well to such foam blocks due to the significant hydrophobization of foam concrete by foaming components (most foaming agents capable of carrying out exchange reactions with calcium in an alkaline environment perfectly hydrophobize it).
To increase the adhesion of plaster to a wall made of foam blocks made using injection molding technology, you can use a reinforcing mesh.
When plastering walls made of materials that do not absorb moisture well (concrete, foam concrete), the first step is to first spray a layer of mortar onto the wall to increase adhesion, and then, after drying, apply the main plaster layer.
Painting a plastered wall made of foam concrete must be vapor-permeable facade paints(silicate or silicone).

country house 6x6 two-storey house 6x6 build a house 6x6 foundation + for a 6x6 house

Many people, having decided to build their own home, cannot decide what material will be used for construction. Currently, foam block is especially popular. The construction composition has certain advantages. First of all, it is a fairly warm and environmentally friendly material.

Designing a 6x6 house from foam blocks

On initial stage construction, it is very important to choose the most suitable project according to which all work will be carried out. Specialists of the company PROEKTSTROY-P LLC are ready to provide the necessary services. The foam block has the same strength as brick, so there are no weight restrictions for floors and roofing structures. It should be noted that this material has a significantly lower specific weight compared to brick, so the construction of a massive foundation for such a structure is not required.

With the help of such material as foam block, it is possible to realize any architectural solution, creation of any geometric shapes. With a foam block, the work is much easier, but the possession of this feature is more related to the construction process rather than design.

The project of a house made of 6 by 6 m foam blocks will especially appeal to those who prefer reliability and convenience. In the proposed project of a 6x6 house made of foam blocks, all planning details must be carefully selected. Also, this project should be presented beautifully style decision facade. It should also be noted that when purchasing a 6x6 house made of foam blocks, the presence of excellent taste is emphasized. After all, becoming the owner of a private country house is at all times considered an indicator of prestige and high level income.

If you have already decided that foam block will be used to build your house, then feel free to trust all necessary work specialists of the company PROEKTSTROY-P LLC. Highly professional specialists will complete all work efficiently and on time. We are engaged not only in the construction of residential and commercial buildings, as well as garages and baths, but also the supply of materials at the most affordable prices. It is possible to build a mansion on credit or in installments for special conditions– check with our specialists. Even the largest and most creative projects of houses made of foam blocks are not difficult for us!

Go to:

1. Stages of building a house from foam blocks