Comprehensive apartment cleaning involves putting everything in order in all rooms without exception. Special attention I always want to focus on the most difficult areas of the apartment. Today we will try to tell you how to wash the bathtub itself from various materials: cast iron, enameled, acrylic, how to remove traces of rust and yellowness simply and quickly.

Rooms for water procedures may look different

The kitchen and bathroom will tell you how good the housewife is. After all, not only the reputation of the keeper of the hearth, but also the health of the household depends on their cleanliness. This is especially true for the bathroom, because high humidity creates a favorable environment that breeds mold and other fungal bacteria, so timely disposal of different types stains and drips will help prevent some illnesses for family members.

• Water should be released immediately after washing, this can prevent dirt and salt deposits from settling on the surface.
• A light rinse immediately after use will remove any residue. dirty water, traces of yellowness.
• It is advisable to ventilate the bathroom after use, wash the bathtub itself, and ensure it dries or directly wipe off any remaining water with a rag.
• It is strictly forbidden to clean the enamel or acrylic surface of the container with rough steel wool and brushes, so as not to destroy the coating. Alcohol and acid-containing products also damage the enamel and acrylic layer.
• It is recommended to install a hood in this room. Air circulation will help dry the surface and prevent fungal growth.
• You should resort to the use of special cleaning solutions when soiled or at least once every 7 or 14 days.

Only regular care will ensure cleanliness and order.

It is best to wash a glossy white surface using special products.

Detergents

The industry offers modern consumers a variety of cleaning products in the form of gels and powders for cleaning surfaces of all types. They are designed to eliminate those contaminants that may appear on the surface of the bathroom:

• yellowness from smudges;
• limescale;
• traces of rust.

The reasons for their occurrence may be the presence of various salts and other impurities in the water, as well as the mediocre condition water pipes. To prevent rust, you can replace metal pipes to plastic ones, at least within an apartment or house. To prevent yellowness, installing a filter will help, but a filter will not help against salts of heavy water.

Modern plumbing offers consumers steel, acrylic and plastic bathtubs; cast iron options are a thing of the past, although in some places residential buildings There are still cast iron containers left. All materials require care, but not all products will clean steel or acrylic surfaces equally well. I would also like to mention the plastic options, since the cleaning products for them have a completely different composition than SanClin and Domestos, which are suitable for caring for steel and cast iron surfaces.

Domestos brand household chemicals are popular and recognizable

Please note that household industrial products designed for cleaning bathtubs at home almost all have toxic ingredients and can cause allergic reactions, even if all instructions for use are followed. There are cleaning solutions and gels made without chemical compounds, but due to the cost, not every housewife can spend money on them.

In order not to buy expensive products and keep your steel, acrylic or cast iron surface clean, you can purchase:

• Soda ash, for creating soda ash.
• Vinegar for cleaning and removing odors.
• Mustard powder for removing stubborn stains.
• Baking soda to mix with vinegar for harsh surface cleaning.

All of these components are inexpensive and are available to every housewife. At home, you can use them to prepare a gel or mixture that is no worse than a factory product, adding some more ingredients from those available.

Cleaning methods

How to clean a bathtub with baking soda to make it white again? For minor drips and fresh spots of plaque and rust on the walls of enameled and cast iron containers, you can use water-soda slurry. Dilute a little baking soda with water, then apply to the stains. After a quarter of an hour, wipe off the stains with a sponge and rinse with water.

For strong traces of rust and old lime stains, the following recipes are suitable for working at home:

• Apply a paste of heated vinegar mixed with salt onto the stain and wipe. Then wash the surface with warm water.
• Soak a sponge in a solution of borax and vinegar, rub the stain well until it disappears completely.
• Stir until homogeneous mass salt with turpentine, apply to yellowness, traces of rust and wipe well.

Systematic restoration of order in the room for water procedures

Rough surfaces caused by limescale can be removed with vinegar, salt, lemon juice and ammonia. At home, such pollution can be removed as follows:

• Vinegar and salt can easily wipe off stains; you don’t even need to use excessive force.
• Lemon juice is applied to the surface of the enamel bath and washed off with water after 10 minutes.
• The ammonia is diluted with water, applied for 10 minutes, then all that remains is to wash the entire bath. When working with ammonia, it is recommended to wear a mask so that its vapors do not irritate the mucous membranes.

All of the above recipes are suitable for cleaning cast iron and steel surfaces. Bathtubs made of plastic and acrylic need to be cleaned differently. An acrylic surface, unlike an enameled one, is resistant to ammonia and other types of alcohol.

You should not use products containing:

• alcohols;
• acetone;
• chlorine;
• acids;
• formaldehyde;
• alkalis.

An acrylic bathtub should be cleaned no more than once every two weeks. If contamination occurs, naturally, it should be removed immediately, and not wait until it is absorbed. It is recommended to use special products for cleaning, but if they are not at hand, then laundry soap will do. The entire surface of the container is treated with soap, then left to disinfect for 1 minute, after which it is necessary to wash all treated areas with warm water.

Few housewives like to clean the bathtub

A novelty of our century is a plastic bathtub, which is gaining popularity due to its low cost. Buyers pay little attention to the fragility and whimsical nature of the container; they begin to encounter problems only later. One of these is cleaning plastic. The surface is very delicate, so no powders, including soda, can be used. At home, it is permissible to clean a plastic container:

• vinegar;
• ammonia;
• citric acid.

Snow-white sanitary ware gives the bathroom a cozy and even festive look. How to clean a bathtub at home? After all, unfortunately, pristine whiteness fades very quickly. We often use the bathtub not only for its intended purpose, but also for other purposes: laundry, washing large items, bathing animals, and so on. How to clean an old bathtub and how to whiten the surface so that it shines with its former cleanliness? To do this, there are many household chemicals sold in stores, and you can also resort to simple compounds that are always at hand - soda, acetic acid and the like.

But before you start cleaning the surface from stubborn dirt, you need to determine the type of contamination. Some cleaners deal with almost all problems, while others are used only for certain types of plaque, such as limescale.

The surface of the bath becomes dirty various reasons. Let's list the main ones.

• Simple raid. This is the type of dirt that is formed when washing. It consists of skin particles and skin secretions mixed with a soap solution. It is very easy to clean the surface from such deposits - just wash it off every time after bathing hot water using a sponge.
• Soap residue. The compounds that make up soaps, shampoos and shower gels over time form a gray coating that eats into the surface of the enamel. Get rid of him by simple means It won't work.
• If your area has hard water, then salts from it will be deposited on the surface of all plumbing fixtures. White or yellowish crumbling plaque will have to be removed using special products containing acids that dissolve calcium compounds.
• Rust . Appears due to increased iron content in water. Also applies to difficult-to-remove contaminants.
• Old enamel. Old bathtubs are difficult to clean, as their surface is covered with small cracks into which various contaminants are embedded.
• Yellowness on enamel settles if there are old water pipes in the house, from which various oxides and water biofilms come.
• Specific contaminants. This may include paint, other products that have fallen onto the surface of the bathtub after renovation, and mold. They must be combated with the help of special means (solvents, antifungal solutions).

How to clean a bathtub?

How to clean a bathtub without damaging the surface? Let’s immediately make a reservation that everything said applies to steel and cast iron products with an enamel coating. We will tell you how to clean acrylic plumbing fixtures below.

When starting to clean your bathtub yourself, use the following tips.

• When choosing a product, be guided by the degree of surface contamination. If the bathtub is cleaned regularly, use weak solutions and gentle cleaning agents, preferably gel ones. But old dirt and yellowness will have to be removed with strong acids, which can damage the enamel. Therefore, strictly maintain the required time and rinse the composition well with water.
• Don't forget about protective equipment. Even the most harmless at first glance chemical substances may cause irritation to the skin of the hands and respiratory tract. Use gloves, do not close doors and windows in the room, and do not use hot solutions unnecessarily (to avoid inhaling chemical fumes). Wear a respirator when working with chlorine-containing liquids.
• Do not scrub the bathtub with hard brushes, metal sponges, or fiberglass sponges. This will damage the top layer of enamel, and as a result, the surface will become more dirty and more difficult to whiten.
• It is not recommended to use toilet bowl cleaners for the bathroom - they are too aggressive.

Products that contain the following chemicals corrode the enamel:

• hydrochloric acid;
• oxalic acid;
• alkalis;
• aldehydes.

Also, do not use various abrasive powders to remove yellowness. Modern household chemicals provide a wide selection of products in the form of pastes, gels, creams and liquids - choose from them.

How to clean a bath without difficulty? The easiest way is to use special household chemicals sold in stores. It will cost a little more and is not as safe for health, but correct selection chemical to clean even old cast iron bath won't be difficult. Here are the characteristics of the most popular products that can be bought in household chemical stores.

• Domestos is quite suitable for regular care, although it contains chlorine. It will easily clean stains medium difficulty, but will not delete limescale or deeply ingrained dirt. In addition, it is unpleasant to work with due to its pungent odor.
• Cillit Bang the best remedy for regular cleaning, but it is not very effective against rust.
• Cif. Use a cream or gel product. The Ultra White series will help whiten yellowness.
• Pemolux is a soda-based product that is quite effective and safe. It can be used to remove stains from old bathtubs where the enamel is already slightly damaged.
• Comet in gel form is used to whiten surfaces and remove stubborn stains. The best series is “7 days of cleanliness” with prolonged action.

Folk remedies

Household chemicals can be replaced by folk remedies. Of course, they will not cope with old stains, and to return the bathtub to its original whiteness, you will have to work hard with a sponge. But exactly simple ways preferred by many people who do not want to use modern chemistry (reasons may include health concerns, allergies in the house, small children, saving money). Also, such cleaning products do not damage the enamel coating of cast iron and steel baths, which extends their service life.

• Soda. This is an excellent and undeservedly forgotten product for cleaning almost any stain, except limescale. It perfectly removes fat, yellowness and eliminates bad smell. This is a very cheap and safe substance for household health. at home using baking soda? You can simply apply it to the surface with a sponge, or you can use the following recipe. Baking soda is mixed with soda ash in a 1:1 ratio. The bath is moistened and the composition is applied for 20-30 minutes. Then the surface must be cleaned with a sponge soaked in table vinegar, without rinsing off the soda. After half an hour, thoroughly wipe the surface with the resulting mixture and rinse with warm water.

• Vinegar . Table vinegar (9%) does a good job of removing common stains and rust. It will take time to clean the surface. Soak paper napkins or towels in the vinegar solution and cover the entire surface of the bathtub with them. Leave for 3-5 hours. Then remove the paper and rinse the bath with water. Most likely, you will be able to whiten the surface by several tones.
• Lemon acid. Citric acid solutions will remove both rust and limescale. This is how it is used. Two tablespoons of citric acid are dissolved in half a liter of hot water. Using a sponge, apply the solution to the surface of the bath and leave for half an hour. Then wash off with water.
• Mustard powder. A paste is made from it, which is used to clean contaminated areas of enamel.

There are simpler recipes for the lazy. Take water into the bath and dissolve one and a half liters of vinegar or 100 g of citric acid in it. Leave it overnight, drain the water in the morning and rinse the bathtub with water.

Cleaning limescale

Using home remedies, you can make mixtures that will help you clean out limescale and rust with your own hands.

Here are a few useful tips for removing limescale from the enameled surface of cast iron and steel bathtubs.

• Mix borax (sodium tetraborate, sold in pharmacies) and table vinegar in equal proportions.
• Mix the heated vinegar with salt to make a paste.
• Mix salt and turpentine in equal proportions.

Apply the mixture to the stain and wipe it thoroughly with a cloth.

Removing rust

How to clean a bathtub from rust at home? Here are some recipes.

• Ammonia is dissolved in water and applied to the problem area for 10-15 minutes, then washed off with water.
• Squeeze lemon juice onto rust stains and leave for 10-15 minutes.
• Wipe the rust with a mixture of vinegar and salt.

A little about acrylic bathtubs

How to clean an acrylic bathtub? It is best to use special gel or cream products: “Akrilan”, “Pani Vanna”, “Ravak”, “Sun Clean”, “Tim Profi”, “Mr. Chister”, “Acrylic Polish”, “Triton”.

You cannot use products containing:

• acetone;
• ammonia;
• chlorine;
• alcohol;
• formaldehyde;
• alkali;
• acids.

The surface should be cleaned no more than once every two weeks, and disinfected once a week. If you don't have special means for disinfection, then use the usual laundry soap. Apply soap solution to surface acrylic bathtub and then rinse off.

Now you know many ways to clean a dirty bathroom. Each type of stain has its own cleaning products. This could be regular soda or an expensive bleaching gel for plumbing fixtures. The main thing is that it is effective and easy to use.

The bathroom is, as you know, the “face” of the owner of the apartment. It is by the cleanliness of the bathroom that one judges cleanliness and hard work fair half specific house. Of course, cleaning always takes a lot of time, but the bath should remain perfectly clean - even if there is a creative mess around.

True, to a large extent the cleanliness of the bathtub depends on the material from which it is made. If, for example, it is enough to wipe an acrylic bathtub regular sponge with soap, then sometimes it’s not easy to wash a cast-iron bathtub...

8 best store-bought cast iron bathtub cleaners - what to look for when purchasing?

Each cast iron bath, as is known, is covered with enamel, which is applied inside this container using an electrostatic method, after which the product is “baked” in a heat chamber.

It is with cleaning the enamel that the housewife has problems: the enamel on cast iron bathtubs quite quickly loses its appearance when exposed to external factors and in the absence of preventive measures.

What is usually used to clean a cast iron bathtub?

• First of all, against limescale , which covers the enamel with a nasty color due to bad water and the presence of various impurities in it.
• Rust. The older the pipes, the more unpleasant rusty stains there will be on the bathtub. It is worth noting that in old cast iron bathtubs, zirconium components were used in the production of enamel to increase strength and improve other properties, but, alas, they contribute to the faster formation of rust, corrosion and scratches with cracks. Modern production processes use titanium salts, which ensure smoothness of the product and high wear resistance.
• Fat. All the dirt that a person washes off the body, along with sweat and skin particles, settles on the bathtub machines. Naturally, when the container is rarely cleaned, all this settles on the walls of the bath and gradually builds up on top of each other, resulting in the formation of a serious and difficult-to-clean deposit.

It is also important to note that the enamel of old bathtubs is very, very fragile, and cleaning with aggressive agents can quickly damage the coating, even causing the dreaded “gaping” dark spots at the bottom.

How do Russian buyers clean their cast iron bathtubs?

Video: How to clean a bath quickly? How to make a bath snow-white?

8 Best Store-Bought Cast Iron Bathtub Cleaners

1. White. With its help, you will return your bathtub to its original whiteness and get rid of bacteria, grease stains, paint stains, fungus and mold. True, it will not cope with either limescale or rusty stains. Therefore, it is recommended to use the product where strict and emergency resuscitation of the container is not required - just “add gloss and return whiteness.”
   The product is diluted 1 to 2 and the container is washed with a hard sponge (not metal!). You can also pour into full of water bath 100 ml of white, shake and leave overnight. It is strictly not recommended to use the product in its pure form! average cost– about 60-80 rub.
2. Mister Muscle. It will help you disinfect the bathtub, clean it from limescale, dirt, and grease. This composition penetrates very deeply (with correct use) into the structure of stains and quickly destroys them.
   Plus, unlike white, Mister Muscle is much easier and more enjoyable to use. Pros: presence of a trigger, absence of abrasives. The average cost is about 200 rubles.
3. Cif. One of the most popular cleaning products in general today. Sif is used with success in both the kitchen and bathroom.
   This product instantly and effortlessly removes even old rust and heavy limescale deposits, leaving all surfaces shiny after use. We recommend Sif Ultra White, which has whitening properties. The average cost is about 180 rubles.
4. Comet. Another ideal product for cleaning cast iron bathtubs. Today it is available in convenient plastic bottles in the form of a gel; it does not scratch the enamel and easily removes all “troubles” from the surface of the bathtub, and at the same time all microbes.
   It is enough to apply the product and wait 10 minutes, then wash off the dirt with a sponge. The average cost is about 190 rubles.
5. Sanox. A powerful product for the most difficult stains. One might say, “heavy artillery” in household chemicals. Sanox allows you to wash away everything that previous products couldn’t deal with. And white-hot. This gel will also remove all bacteria and unpleasant odors. Remember that this remedy is very “vigorous”, and for thin enamel It is better to choose a product with a more gentle composition. The average cost is about 100 rubles.
6. San Klin. This product contains no phosphates or harsh abrasives and is suitable for any bath. It does not have a nasty chemical smell, it is easy to apply using a trigger, and quickly removes any dirt. Average cost – 170 rubles.
7. Frosh. Aromatic eco-product based on fruit acids. Not suitable for heavily soiled bathtubs, but ideal for preventative maintenance and regular cleaning of the container.
   The product is safe for people and washes off easily. The average cost is 250 rubles.
8. Mr. Chister. A product with an effective composition that will help remove fungus and mold, destroy bacteria and odors, and wash away light stains. Has a spray bottle, has pleasant aroma. Average cost – 150 rubles.

How to clean a cast-iron bathtub from rust and plaque at home - 7 best folk remedies for cleaning bathtubs

Not everyone uses it store products when cleaning the house.

Some people fundamentally do not want to spend their money on expensive household chemicals, while others fundamentally do not use them, choosing safe home remedies. Still others are allergic to household chemicals, while others simply suddenly ran out of all the “saving bottles” in the nightstand under the bathroom. In these cases, “grandmother’s remedies” are used.

Among all the folk recipes used when cleaning a cast-iron bathtub, we have chosen for you the most popular and effective:

1. To remove rust. Take 1:1 ammonia and regular hydrogen peroxide, mix and apply to areas with stains.
2. We remove rust and yellowness. Mix salt and vinegar 1:1 and lubricate problem areas with this paste. You can leave the mixture for several hours - it will not harm the coating.
3. From limescale. Mix salt and soda 1:1, apply the mixture to problem areas for 2 hours, then wash off the already softened plaque with a regular sponge.
4. From limescale. Dilute oxalic acid to a semi-liquid consistency, lubricate the plaque, wait 1.5 hours.
5. For regular cleaning. We apply regular soda onto a sponge and treat the bath with it instead of powder. Simple, economical and without harm to the surface.
6. From rust. Mix turpentine (35 ml) and salt (about 100 g), apply to the surface and clean.
7. From rust and plaque. Mix 3 parts mustard (dry) and 1 part soda, clean as with regular powder. Ideal for cleaning your bathtub once a week.

Video: How to clean a cast-iron bathtub from plaque at home?

Bathtub cleaning tools and products - what should not be used to clean a cast iron bathtub

If you inherited an old and rusty cast-iron bathtub along with your apartment (or, while you were on a business trip, your family brought the bathtub to the point of “easier to throw away”), then you should remember: What products and tools are not recommended to be used so as not to damage the enamel:

• Products with chlorine (unless you're dealing with mold).
• Products with aggressive acids. They are used only “spotwise” on problem areas and are not left for long.
• Products with abrasives . They can scratch the enamel, which in turn will be the beginning of the end of your bath. Through scratches, rust and plaque will penetrate deeper and deeper, the cracks will become larger, and then it won’t be long until the cast iron itself.
• Products with concentrated hydrochloric acid.
• GOI paste. It is not used for polishing enamel! If you decide to polish, use a super-soft auto polish and a regular soft white cloth for the enamel. Polishing will take you 20-30 hours, but you will like the result.

When choosing tools to clean your cast iron bathtub, avoid...

1. Hard brushes.
2. Sponges and brushes with metal.
3. Fiberglass sponges.
4. Blades and other auxiliary tools.

Perfect option - a moderately hard sponge or a regular brush with a handle.

Also today, housewives successfully use and melamine sponge - But, for all their magical effectiveness, they remain extremely toxic when melamine enters the body, so their use remains controversial.

Prevention of dirt and deposits on cast iron bathtubs

No one will argue that it is much easier to keep a bathtub white if you wash it regularly and care for it properly. Moreover, if it is a cast iron bathtub, which requires a special approach.

You can extend the life of your bathtub and postpone its replacement (installation of liners, etc.) through simple manipulations called prevention:

• Rinse the bathtub with a mild product every evening after everyone has washed . Be sure to dry it with a towel to prevent rust.
• Twice a week - or at least once - we thoroughly clean the bathtub - with a serious remedy.
• We repair taps/mixers immediately upon detection of a malfunction. Leaky faucet = deep rust.
• We use soft remedies and tools for cleaning.
• We monitor the water temperature. At temperatures above 65 degrees, cracks may form in the enamel.
• We quickly eliminate all cracks and chips - with the help of a specialist or independently - using a special putty and epoxy resin.
• We prefer gel and paste cleaning products . Powder products contain abrasives that scratch enamel.

If you follow all the rules, you can extend the life of your favorite bathtub by 10-15 years.

However, there is always an option with acrylic liner, which is placed directly into a cast iron bathtub.

The site site thanks you for your attention to the article! We will be very pleased if you share your feedback and tips in the comments below.

The bathroom is a place in the house where you can perform hygiene procedures. Therefore, it should always be clean and well-groomed. However, the bathtub, which contains yellow spots and divorces can significantly ruin your mood and worsen appearance interior Many people do not know how to clean the bathtub from yellow plaque. And to do this, in fact, is not so difficult.

Yellow spots on the surface of the bathtub can have different causes. Sometimes the means for cleaning them have to be chosen after they have been identified. Most often, pollution of this type is of the following nature:

• Sediment of poor quality tap water;
• Soap scum;
• Rust;
• Old age of the bathroom (stuck in old dirt);
• Mold and fungi;
• Paint and construction debris;
• Limescale.

Important:

Finding out the cause of contamination is necessary in order to know how to wash them. Any dirt may require an individual approach.

Preparing the bath

Before removing limescale and any other type of stain, it is necessary to prepare the surface. It includes:

• Studying the type of surface (to determine the cleaning products that can be used);
• Preparation of instruments (hard metal brushes are not recommended);
• Pre-washing from remnants of shampoos and various shower gels and soaps.

Bathroom care rules

In order to wonder as little as possible about how to wash a surface from old plaque, it is necessary to carry out prevention using the following rules:

• The bathtub should be washed after each use. To do this, it is enough to use clean warm water and a soft sponge.
• The bathtub must be disinfected at least once every two weeks. However, it is important to remember that using too aggressive chemicals for this is not recommended.
• Metal objects on the sides of the bathtub can leave stains that are difficult to clean.

Video: how to care for your bathroom?

Advice:

Washing after each use can minimize the number of deep cleanings.

Cleaning bathtubs made of different materials

Determining the material and coating is very important, since hard cleaning of bathtubs with too capricious surfaces is destructive and can cause irreparable damage.

Cast iron

Nowadays, cast iron units have become rare, so they are most often found in old apartments. Nevertheless, you can use them, but with the condition of frequent cleaning and washing. The following tools are best suited for this:

• Powders. To clean cast iron with them, you can use a stiffer brush. To do this, you need to moisten it and apply the powder for fifteen to twenty minutes, then rinse with warm water.
• Ammonia and baking soda. Mixes in a one to one ratio. Using a brush, apply the composition to the surface for half an hour, then rinse off.
• Soda ash and baking soda. Mix in different quantities and apply to wet cast iron for one hour, after which it is washed off. The mixture helps against many types of contaminants, including rust.

Video: using soda for plaque:

Enamel

Enameled bathtubs are more common than cast iron. And the approach to them should be different. How to wash enamel? You can use the following tools:

• Baking soda. Apply to a wetted surface and leave for ten to twenty minutes. After this, the powder can be washed off and the procedure repeated if necessary.

• Laundry soap and ammonia. Rub a little soap into one glass of warm water and add five drops of alcohol. The composition is applied for fifteen minutes using a sponge.
• Plumbing preparations. Any soft powders and gels will do. Use according to instructions.
• Lemon acid. How to remove limescale? Citric acid in in this case is an excellent tool. In addition, it gives freshness and shine to the enamel. It is necessary to dissolve in water and cover the bath for half an hour, then rinse with a rag or sponge.

Important:

Enamel is a rather fragile coating that does not tolerate impacts and hard metal brushes.

Acrylic

Acrylic is one of the most capricious coatings, so it is important to know what not to use when cleaning it:

• Chlorine preparations;
• Formaldehyde;
• Solvents;
• Abrasives.

But how then can you clean the bathtub from yellow deposits if it has so many restrictions? There is a way out in this situation. The following products are usually recommended for use:

• Acrilan. Special chemical drug, designed for washing surfaces of this type. It has a soft and non-aggressive composition, so it does not damage acrylic.
• Acetic acid. It is necessary to take a full bath of warm water and pour a weak acid solution into it. It is enough to leave this composition for twelve hours. You can use apple cider vinegar in the same way.

Important:

Steel

It is highly not recommended to use brushes with hard bristles for cleaning steel bathtubs. The use of aggressive chemicals is also undesirable. However, there are tools that can be used safely:

• Liquid detergents, including dishwashing detergents. Apply a foamy product to a damp surface and leave for half an hour, after which it can be washed off.

• Baking soda. On steel, the powder begins to act very quickly, so it is enough to apply it for a few minutes.
• Ammonia. A solution of a glass of warm water with a tablespoon of chemical is used. They need to wet the bath for fifteen to twenty minutes.

Cleaning up traces of repairs

Regular fresh paint wooden surfaces can be cleaned with vegetable oil or solvent. However, in this case, you need to be careful with more capricious coatings. Dried paint is extremely difficult to remove without damaging the structure, but spatulas and knives should not be used for this.

Duty Extra is a universal cleaning product after renovation. However, the drug is one of the most aggressive and requires careful use.

Updating a damaged bathtub

There are situations when a bathtub that is almost out of order requires updating. On the one hand, it may have a strong frame, but it quickly becomes covered with stains of various structures and natures. Moreover, even black deposits can settle at the bottom of the container. It is no longer possible to wash off such contaminants if the coating is severely damaged and contributes to the accumulation of ingrained dirt.

You can try using the most powerful means, such as a mixture of calcined and baking soda or acetic acid. In addition, yellow stains in some cases can be easily removed using powder and gel bleaches. If cleaning does not lead to any result, the bath should be replaced or its surface should be updated using acrylic coating. If you choose the second option, you will need more delicate care for her.

Conclusion

Yellow or black plaque on the surface of the bathroom is a nuisance that spoils the appearance and reduces the hygienic properties. However, whatever their nature, removing dirt is not as difficult as it seems. Currently, there are a lot of household chemicals and folk recipes who can easily cope with the problem. In addition, it is very easy to facilitate the task of large-scale cleaning by carrying out daily washing after each use, as well as following the operating rules.

Video: how to clean a bathtub?

First of all, you need to put on gloves, choose the right washcloth and the right product. And here everything will depend on what exactly and from which bath you need to remove.

How to clean different bathtubs

1. Enameled cast iron baths. They should not be rubbed with steel wool or hard sponges. This leaves scratches and thins the enamel layer. Also, for cleaning you should not use aggressive products with a high chlorine content.
2. Enameled steel baths. When washing, do not turn on too much hot water. The enamel can crack even on a new bathtub due to sudden temperature changes. As in the case of a cast-iron bathtub, hard and metal sponges are prohibited.
3. Acrylic baths. You need to wash it carefully, because even medium-hard sponges can leave unsightly streaks on such a bathtub. Use only soft sponges and special cleaning products, preferably gels or pastes. Do not use abrasive substances washing powders, emulsions with alcohol, acetone, gasoline, chlorine. A solution of soda and vinegar can be applied extremely rarely and only to particularly severe stains. In other cases, it is better to replace soda with lemon juice.

How to clean a bathtub from small stains

Every time after water procedures, particles of skin remain in the bath. This type of plaque is very easy to remove: you just need to thoroughly rinse the surface with water.

Soap accumulates on the surface of the bathtub, causing unsightly streaks and stains. Regular baking soda can handle them.

1. Wet the surface of the bathtub.
2. In a bowl of water, dilute half a packet of baking soda to form a thick mixture.
3. Apply baking soda to the surface with a soft sponge and leave for half an hour.
4. Wipe the bathtub with a sponge and rinse off the baking soda with water.

How to clean a bathtub from limescale

Hard water contains a large number of magnesium and calcium salts. When they settle, a coating appears on the plumbing fixtures, which is more difficult to get rid of than soap.

Method 1. Vinegar-soda solution

1. Mix ½ cup baking soda, ½ cup water and ¼ cup vinegar. If you are going to clean an acrylic bathtub, replace the baking soda with lemon juice.
2. Apply the solution to the bath and leave for a while.
3. Scrub the surface with a sponge and rinse off the vinegar solution with water.

Method 2. Soda + lemon solution

1. Mix baking soda with water to form a paste.
2. Apply to the bath and leave for a while.
3. Add to water citric acid in a 1:1 ratio.
4. Apply the solution to the baking soda and wipe with a sponge.
5. Rinse the bathtub with water.

How to clean a bathtub from yellow deposits

Yellow deposits may appear due to poor quality tap water or rusty pipes. You can remove it using dry bleach diluted with water in a 1:1 ratio. You should get a thick mixture similar to sour cream. Rub the bath with it, let it dry and rinse with water.

But keep in mind that chlorine bleaches can attack enamel, so it's best not to use them. And for acrylic bathtubs, as we wrote above, this method is definitely not suitable.

Rusty streaks in the bathtub are the result of bad pipes or damaged enamel. In this case The best way forget about the problem - eliminate its cause. But there are also several home recipes.

Method 1. Ammonia + hydrogen peroxide

1. Pour 100 ml into a glass container ammonia and 50 ml of hydrogen peroxide. Mix well.
2. Using a cloth, apply the solution to the problem area.
3. Rinse off with water after 10–15 minutes.

Method 2. Lemon juice

1. Squeeze out a little lemon juice on a rust stain.
2. Leave on for 10-15 minutes and rinse with water.

Method 3. Soda

1. Add water to the baking soda until you get a paste-like consistency.
2. Apply the resulting paste to the rust stains with a sponge.
3. Rub and rinse with water.

How to use household chemicals

If you can’t get rid of dirt with home remedies, use cleaning powders and gels.

1. Read the composition and consider the type of bath.
2. It is better to use environmentally friendly substances, but they are more expensive.
3. Follow the manufacturer's instructions. For example, sometimes the solution needs to be washed off immediately, sometimes it needs to be left for a while to make the bath clean.
4. Some products have a harsh unpleasant smell. This means that to use them, yours must have good ventilation.
5. Never clean a bathtub without gloves.