Our company “LSTKstroyGroup” brings to your attention ready-made projects based on a frame made of LSTK. If you are not ready to develop and think through completely on your own future construction, then you can familiarize yourself with our offers and buy any of the ready-made projects presented by us. This can be a building of large or small sizes, which will be based on a metal frame made of galvanized thermoprofile LSTK (Light Steel Thin-Wall Structures) and finishing quality materials, suitable in a given situation.

First of all, we always focus on the wishes of our client, so if necessary, we can recommend any option for a residential building for purchase. The basis for our recommendation will, of course, be the conditions set by the customer. If you are sure that you cannot select any of the options presented on our website, then we suggest leaving a request for our designers.

Thanks to the experience of our specialists, according to your application, we will create an individual project for a prefabricated building ( a private house, industrial building), and we will also produce a metal frame from thermal profiles. A full construction cycle is also possible, from the design of a prefabricated building to turnkey delivery.

Catalog of prefabricated houses

When building a residential building, we suggest you immediately think about other buildings - such as a garage and a bathhouse.

Garage 6x4 m. gable roof type 3	Garage 6x4 m. pitched roof type 2	GARAGE FOR 3 CARS - 60 sq.m.	Garage 6x4 m. pitched roof type 1
	BATH - 29 sq.m.	BATH - 36 sq.m. (6x6)

Production of prefabricated houses

Not everyone wants to buy a project that, most likely, has already been installed somewhere else. This is especially true for residential country houses. If you do not want to buy residential buildings presented in our catalog, we can suggest you contact our designers. Based on LSTK, they will be able to design a frame for you, which in the future will become a full-fledged country house.

What will be the features of our proposal? Our specialists work efficiently and always take into account the basic wishes of clients. We do not imagine working under any other conditions possible. It is customer focus that allows us to create excellent residential buildings. Every element has been worked out in them so that no inconsistencies arise during the construction and erection of the structure.

Therefore, by contacting our planners, you can count on successful production and completion of construction. Adequate recommendations for use building materials inside the frame made of LSTK will provide you with a durable structure. However, you can count on durability when choosing our standard prefabricated buildings. The LSTKstroyGroup company guarantees their quality by independently checking each frame for compliance with all norms and rules. You no longer have to look for where you can order a finished construction or layout of your next building according to your desired parameters. Our company will provide you with everything you need for a pleasant life in a country (or city) area.

Our specialists will provide you with structures made of light steel thin-walled structures in the shortest possible time and will inform you about necessary materials and components at your site. Only a well-developed project can cope with any task assigned to it, and our company will do everything to ensure that your object is the result of just such a project.

Advantages of prefabricated houses

Frame prefabricated houses, built using modern technology LSTK (light steel thin-walled structures) have a number of undeniable advantages:

	Light weight Due to the insignificant weight of the enclosing structures ( external walls) do not require the cost of reinforced foundations. Such buildings can be safely mounted on bored or screw piles without fear of shrinkage and “swelling” of the soil. The distance between the ground and the floor partition of the house can be used for storing garden tools, building materials not subject to temperature changes, etc. A shallow foundation with a grillage is also sufficient.
	Construction time The speed of construction is significantly reduced due to the absence of lifting equipment at the construction site (during the construction of private houses). Metal frame of a prefabricated building up to 150 square meters will gather both a team of experienced specialists in the amount of 2 people, and non-experienced specialists in the amount of three people, in a maximum of seven days. First you need to study the design of the KM stage (this is the main instruction for assembling a metal frame from a thermoprofile), which will not take much time.
	Lack of highly specialized specialists During the construction of prefabricated buildings, workers of such specialties as: masons, carpenters (for the construction rafter system) etc. The metal frame is delivered directly from the factory, all thermal profiles are of the appropriate size in accordance with the project and do not require “adjustment” on site.
	Construction cost Prices for prefabricated buildings (metal frame) are much lower than other technologies. Many people argue that a wooden frame is cheaper. When lumber is delivered to the construction site, yes, it is cheaper. But when the customer starts hiring experienced specialists for assembly, he realizes that it is not cheap at all. You need to cut the material to the appropriate size, purchase metal corners for complex load-bearing units. This is where the expenditure of funds begins. Few people pay attention to the proper antiseptic treatment of wooden frames. According to construction standards, antiseptic treatment is required every three years, which means an additional expenditure of money for the purchase of appropriate products and labor costs.

These are just a few examples of what construction prefabricated houses With the use of modern technology, LSTK is today less labor-intensive and will allow you to save a significant amount of money. You can find out about other advantages of houses based on a metal frame made of galvanized profile by calling the specialists of the LSTKstroyGROUP company or sending your questions to the company’s e-mail.

Stages of construction of quickly erected houses

• Laying the foundation.
• Assembly of metal frame.
• Arrangement of engineering systems.
• Clean finish.

You can see detailed information on all stages of construction.

If you have not found the building or design you need on our website, you can send a request and our designers will call you as soon as possible

The welded frame of a metal building is a durable and strong internal skeleton of the structure. The advantages of such metal frame structures are lightness, strength, relative simplicity, high production and installation rates, mobility and independence from the access road to the installation site, and ease of integration into any space. The metal frame of the building is perfectly compatible with the simplest block and pile foundations, and is also easy to complete, configure and rebuild. The material of the metal frame of the building is profile pipe; angle and channel are less commonly used.

The metal frame of the building includes the lower frame, top harness and the racks between them. In a metal frame it is very easy to provide doors, openings, windows and metal sheathing for the roof and floor. A frame building made of metal can be sheathed with corrugated sheets, wood, or sandwich panels. The metal frame is very easy and convenient to sheathe and insulate.

Metal frame for a building

Advantages of metal frame buildings:

• Buildings built using metal frame technology, are characterized by low cost (when compared with buildings constructed using traditional technology). The cost of the structure mainly depends on the materials used. The cheapest houses today are on wooden frames. The cost of houses with a frame made of profile pipe much more, and their price is directly proportional to the cross-section of the pipe. After all, for example, bending a profile pipe is a rather labor-intensive operation and is not cheap.
• High speed of metal construction frame construction. Using a profile for the frame as the main material can reduce the construction time of a building several times.

• The absence of so-called “wet” processes in the technology of constructing residential buildings using a frame (except for laying the foundation). This allows installation of frame buildings at any time of the year and regardless of weather conditions.
• Making metal structures with your own hands ensures the absence of any shrinkage - not only during construction, but also during operation of the structure.

Construction of a house with a frame made of profile pipes

When creating a house from metal structures using your own hands, the most optimal solution will use a frame made of profile pipe. Despite its apparent simplicity, such a frame will have enough complex design. It is imperative to have a foundation that will be lighter than in conventional construction. Here it is worth paying attention to the fact that without a foundation, structures can be created that will later move from one place to another, for example, greenhouses or greenhouses.

In this case, appropriate adjustments should be made to the calculation of the profile pipe. Typically, square profile pipes measuring 60x60 or 100x100 mm are used for the frame of a residential building. You can determine the pipe size more accurately by knowing the dimensions of your house and using a profile pipe calculator. , performed outside production premises, must be carried out in compliance with all necessary safety requirements.

We manufacture frame elements from profile pipes as follows:

1. We take the pipes and, if necessary, cut off the part from them that is needed for installation of the structure.
2. We bend the pipes if they need to be given an arched shape, having previously calculated the radius of curvature. This operation can be done using a special tool - a manual pipe bender, or you can contact a specialized workshop where the pipes can be bent on a pipe bending machine.
3. We weld the resulting frame elements according to the requirements of the drawing for the metal structure.

For interior decoration, the most optimal solution would be to use tongue-and-groove boards made of coniferous wood with a width of 40-60 mm. The board must be treated with antiseptics and antipyretics (substances that reduce the flammability of wood). For the subfloor, you can use a board laid on top of logs from the same profile pipe. Any profile covering can be laid on top of the subfloor. Extruded polystyrene foam with a thickness of 60-100 mm is a good choice as insulation. And the frame racks made of profile pipes can be additionally thermally insulated with strips of foam insulation.

For exterior finishing you can use siding or facade plaster, and if finances allow, then natural wood. Proper processing metal pipes allows you to make a roof from them not only as a separate structure, but also as a frame element. The calculation of a profile pipe for the manufacture of roof rafters is carried out taking into account the planned roofing: a lightweight roof with a large angle allows the use of thinner pipes.

Construction of a metal frame for the construction of a garage

When creating metal structures using your own hands, you need to take into account that this design must be very rigid, strong and stable. The material for the frame can be a large section corner. It is better to fasten the frame elements by welding, but you can also use a nut-and-bolt connection by drilling holes for fasteners with a hammer drill.

The assembly of the metal frame must be carried out on the construction site. First, the lower frame is mounted, which is attached at the corners to the pins protruding from the foundation - this ensures its immobility. Then corner posts are installed, connected at the top by ceiling purlins.

Hand-made metal structures are installed along the back and side walls. vertical racks, which will provide rigidity to the structure and will serve as lathing for the installation of wall cladding. There should be a distance between the racks equal to the width of the sheathing sheet, or be slightly less by 3-5 cm if installation with overlap is provided.

To your future home meets your expectations, first you need to “build” it on paper. But we will not repeat the truisms that design? This the most important stage construction. Instead, we want to draw your attention to the advantages of ordering a house project (cottage, household, commercial and industrial facilities) at Astekhome.

Individual approach

As part of the implementation of the affordable housing program, we offer standard and individual designs of houses made of light-weight steel frames. Moreover, the first option does not at all limit the customer during construction. Despite the fact that the development is carried out using already prepared parameters, there is always the opportunity to customize it for yourself, that is, change individual characteristics; layout, room sizes, location of plumbing units, etc. Ready-made designs for houses made of LSTK can be considered as a basis that can be adjusted taking into account the preferences and capabilities of the customer.

We work quickly!

Having studied all the features of designing objects made from light steel frames and having perfectly mastered the technology of constructing prefabricated residential, commercial and industrial buildings and structures, Astekhome specialists will develop an individual house project for you as quickly as possible. We guarantee a high professional level and short deadlines.

Availability

You will be able to implement the projects of houses made of LSTK that we have developed yourself, even if you are not a builder! We will provide you with a detailed project that even those who are building for the first time can understand and build a house. When you order LSTK, you will receive a ready-made house kit, cut and marked in production and equipped with all the necessary construction and finishing materials.

• We are giving away projects of houses made from LSTK as a gift!

Each client who orders an LSTK profile from us receives a house design as a gift! This will reduce both financial and time costs of construction.

Call us. And you will have your own home in 2 months!

The demand for frame houses is explained by the low cost of work and building materials, ease of installation - the whole process can be done with your own hands, as well as many other factors. Technologies are constantly being improved, today frame houses made of metal profiles have become widely used, let’s look at the features of house construction.

Those who intend to build a building from a metal profile need to understand the nuances of construction, consider the pros and cons of the technology, as well as the main stages of installing the frame with their own hands. Own house– it’s not just a place where you can live, it often has a sacred meaning: comfort, home, a gathering place. The natural desire to build a warm, strong and reliable home, figuratively speaking, its “fortress”. How to do it? Is there a proven technology with which you can actually build frame houses from the metal profiles of your dreams and with your own hands?

A house made of metal profiles using frame technology is a prefabricated structure made of various elements, installed on the construction site in accordance with the developed project.

In fact, houses made of metal profiles are simplified and smaller versions of skyscrapers and other similar buildings.

If massive rolled steel is used in the construction of large buildings, then light steel thin-walled structures (LSTC) are used for houses made of metal profiles. The only difference is in size and load-bearing capacity; the material of manufacture remains the same - steel.

• the material has high strength;
• low weight reduces the cost of the structure and reduces the load on the foundation, which makes it possible to make it more economical;
• b Due to its light weight, the LSTK frame reduces the cost of transportation;
• ensures high accuracy during installation;
• The metal frame is distinguished by high strength. It is resistant to rotting and destructive processes such as fungus or mold;
• simple installation technology frame house made of metal profiles allows you to do everything yourself;
• makes it possible to build houses with open plan and large spans;
• ensures cleanliness on the construction site.

With all this, metal structures have their disadvantages:

• one of the main dangers is rust, the susceptibility of metal to corrosion;
• unlike wood, metal does not retain heat and easily allows cold to pass through;
• due to high electrical conductivity, it is necessary to equalize the potential;
  not suitable for installing heavy and bulky elements;
• certain risk in case of fires: the time for evacuation of people is reduced due to the rapid melting of metal structures at extreme temperatures.

However, the simplicity of such construction, its high speed- This obvious advantage LSTK.

House made of metal profiles: technology and stages of construction

The first stage of construction is the design stage, in which the entire plan and necessary documentation are developed.

Creation of project documentation

It should be noted that in any case - even if you plan to build it yourself - at the design stage you need the help of a specialist. This is due to the fact that the entire frame structure is manufactured in one factory according to the ordered dimensions.

There are three options:

• The cheapest option is to simply select the desired item from the catalog of ready-made projects and order everything necessary details at the factory;
• you can also make some changes to the already finished project. It will be somewhat more expensive, but it will allow you to individualize your future home and adjust it to your needs;
• ordering an individual project from specialists is the most expensive option.

Speaking about the last option, it should be clarified that it provides for:

• façade development;
• floor and roof plans;
• detailed drawings for the frame;
• sometimes a 3-D model of the future building is compiled.

There is another option - to develop a metal frame project yourself without specialists. Of course, it will be cheaper, but also much more difficult.

Choosing a foundation for a frame house made of metal profiles

Construction, of course, begins with the installation of the foundation. In its choice, the main importance is the features land plot, geological activity, soil features.

To build a frame house from a metal profile with your own hands, two options are optimal:

• shallow strip foundation;
• pile-grillage foundation.

The first type is used in case of good, solid soil. It fits perfectly under one- and two-story buildings made of lightweight materials.

The second type of foundation is suitable for soils with unstable characteristics, for example, for heaving soils with weak strength.

House structure assembly

The elements of the metal frame structure arrive from the factory in numbered form. This makes the process of constructing a building frame with your own hands much easier. Another convenience during assembly - all parts have required size and shape, and there is no need to waste time and effort on cutting and fitting.

The supplied kit contains:

• various frame profiles with holes for connections and communications;
• fastening kits.

This is reminiscent of a children's game of construction set: just use the instructions, install the profiles in accordance with the project and secure them with connecting elements.

Important: It is advisable to choose a Z-shaped section to create a frame; it has perforations or special grooves.

In another way, this element is called a “thermoprofile”; it is the most recommended option in the field of private residential construction, since, thanks to its design, it is capable of retaining heat.

Insulation and façade cladding works

Sheathing the frame is the final stage of assembly.

The technology of work is similar to that used in the construction of wooden frame houses.

There are 3 options for cladding work:

1. Assembling structures with your own hands.

WITH outside the metal frame is sheathed with glass-magnesium or profiled sheets, and the exterior finishing is installed on it.

Thermal insulation is laid between the racks: this can be mineral wool or extruded polystyrene foam. You can also use polystyrene foam - it is much cheaper. The walls must be vapor-proofed from the inside and waterproofed from the outside. The inside is covered with plasterboard sheathing.

1. Sandwich panels.
   They are produced and painted in a given color at the factory - this significantly speeds up the assembly of the house. One of the main advantages of these panels is that they significantly reduce work costs, since they are both insulation and an element of exterior finishing.

Other advantages of the panels:

• resistant to the external environment, influences high temperature and fire;
• have high thermal insulation properties;
• environmentally friendly and safe for humans.

1. Heat blocks.
   This is a rather complex multilayer material, “bricks”, consisting of layers of porous expanded clay concrete, expanded polystyrene (foam plastic) grade 25 and cladding made of expanded clay concrete.

Thermal blocks are high-tech - they create thermal insulation and an attractive facade. The requirement during construction is that the width of the masonry joints between the blocks can be no more than 5 mm, therefore, instead of the usual mortar, special solutions and adhesives are used. Additional reinforcement is used to strengthen the entire structure. It is performed with meshes of wire reinforcement in horizontal seams with a diameter of 3 mm.

Metallic profile- a material that is widely used not only in production, but also in construction. Special designs are being developed that are quickly and easily assembled according to plan.

The object itself turns out to be very light and affordable, since the cost of metal profiles is significantly lower than other building materials.

Subtleties of insulating a metal frame

After final assembly construction, you can proceed to the external, interior decoration. Even if you plan to build a frame house from a metal profile with your own hands, you should take special care of insulation. But there is no need to deviate from technology, accordingly:

• the first step will be the installation of corrugated sheets for outer skin;
• insulation of existing material using polystyrene foam boards, which will minimize heat losses;
• after laying the slabs, they must be covered with an adhesive mixture and reinforcing mesh to achieve strength;
• For finishing there are several proposals: clinker tiles, wet facade;
• On the inside, the walls are also insulated with basalt wool; it is possible to select other raw materials if necessary;
• covering planes with plasterboard - the last of preparatory stages involving plastering and priming;
• Next, you can begin to select the desired materials for decorating your home.

The device process is organized much faster, and metal alloys are much lighter and more reliable. This contributes to the growing popularity of metal profiles as the basis for a cottage.