How to ideally end a troublesome and tiring day in the fresh air? The best way To relax after working in the garden, relax on a sun lounger with a glass of freshly squeezed juice in your hands. At the same time, it is very important that the chaise lounge fits perfectly into the surrounding environment and gives a feeling of peace and tranquility. Can't find suitable garden furniture in stores? Then it's time to learn how to make it yourself.

Types of sun loungers for the garden

Before you make a chaise lounge yourself, you should decide on its type. However, experts advise not to experiment, using modern ones as a basis. plastic materials, characterized by poor quality and fragility. Better look for a high-quality wooden base with a flat, smooth surface. The only drawback of such a property will be its large weight, but this problem can be solved by installing casters on the legs.

Materials for work

To make a wooden chaise lounge with your own hands, you need to prepare the following materials and tools:

• a slab of laminated wood, the thickness of which will be at least 2 cm;
• boards (0.25 cm) and beams (0.45×0.45 cm) for finishing work and creating a frame;
• electrical appliances (jigsaw, screwdriver, drill);
• drills with a diameter of 0.4 cm;
• 4 rollers, 10 cm each;
• corners (as for fastening a bed);
• sanding sheets;
• varnish and paint to decorate the structure and protect it from damage.

For homemade sun loungers, it is better to use sheets of spruce or other coniferous tree. They resist moisture well and are not afraid of sudden temperature changes. These materials can be bought directly at construction centers or made to order from a cabinetmaker (carpenter).

Overall dimensions of the product and getting started

You can make a wooden chaise lounge in accordance with the dimensions of your body or according to the individual dimensions of future owners. Or you can stop at the standard size - 60x190 cm. Once the dimensions have been determined, you can start working:

• form the sidewalls from the beams and fold the structure frame, attaching the parts with corners;
• trim each outer side of the finished frame with prepared boards;
• proceed with further assembly.

Stages of creation do-it-yourself sun lounger for a summer house

1. Make blanks for the legs of the product using bars of the required height. Usually their height is about 5-10 cm, but you can choose other sizes.
2. At a distance of 5-7 cm from the edges of the long beams, secure the legs using long screws.
3. Attach a roller to the center of each leg. To do this, you need to take shorter screws (about 3 cm in length).
4. Using an electric jigsaw, begin cutting the lattice pieces to create your DIY chaise lounge. Most suitable size for planks – 8×60 cm.
5. Start screwing the slats to the sunbed frame, using special spacers to create ideal gaps (1-2 cm will be enough).
6. After assembling the structure, it needs to be sanded and painted in a suitable color.

If you decide to make a folding chaise longue with your own hands, divide the wooden lattice into two parts, which can then be connected using ordinary door hinges. At the same time, it is important not to forget about important detail– fastening strip. It should rest on a stand secured with screws.

Below is a drawing for a slatted lounge chair:

Making a chaise lounge on a frame base using thick fabric

Another popular and in a simple way Making a chaise longue for a summer house with your own hands is a chaise lounge made of material on a frame. This is a light and comfortable summer cottage option that can be converted from a lounger to a chair and back with one movement of the hand.

You will need the following materials and tools:

• two wooden slats 0.25x0.6 cm of different lengths (120 cm, 110 cm, 620 cm);
• wooden slats 2x2 cm (65 cm - 1 pc., 2 pcs. 60 cm and 50 cm);
• high-quality dense material 2×0.5m;
• drill;
• bolts and nuts of suitable diameter;
• PVA glue;
• “zero” sandpaper;
• round file.

Choose a wear-resistant fabric that is not afraid of open sunlight and moisture. Ideal option will be jeans, canvas or tarpaulin. It is better to choose slats from oak, birch or beech (they have increased hardness and strength).

To make light sun loungers for your garden with your own hands, you need to prepare slats of the required length and sand them.

Assembly steps

• you need to drill holes suitable for the selected bolts on each long rail, always retreating 7-10 cm from their edges; all irregularities should be immediately sanded with a needle file until smooth surfaces are formed;

• at the head of the frame (indicated in figure “B”), several holes should be drilled at once for subsequent adjustment of the tilt of the seat back;
• to create a seat, you need to make two more holes at the ends of the long slats; their diameter must match the diameter of the prepared round slats (in in this case– 2 cm); To make the slats hold tighter, you should lubricate their ends with PVA glue;
• combine structure “A” and “B” using screws passing through the upper holes, then combine the resulting module with element “B” in the same way;
• stretch the fabric by folding the edges over the crossbars and sewing several seams with strong threads (this procedure can be completed before final assembly products, then you can sew the material using a regular sewing machine).

How to make a chaise lounge with your own hands even more comfortable?

To ensure additional comfort for your sun lounger, you should place a mattress on it. Take measurements of the finished structure, buy a sufficient amount of fabric and filling material. You can sew a mattress using any known method.

Now you can design your own sun lounger for your summer cottage without resorting to the help of specialists and the advice of friends. There is nothing difficult in this matter if you strictly follow the instructions and follow the information. Learn with us and improve your skills!

A sun lounger on the plot of an ordinary private house, cottage, townhouse or country house is the most important furniture attribute that provides a useful and most comfortable leisure time for all family members, acquaintances or guests. In addition, the original chaise longue for the garden, created with your own hands, is characterized by the ability to bring extraordinary uniqueness to the design of absolutely any surrounding area. A chair of this type, made using natural materials, it will look absolutely appropriate both in the shade of trees, under a canopy of wood, and in the sun. The rocking chair will harmoniously fit into any homestead exterior; in addition, it can be used for newborns, placing this piece of furniture under a canopy, or for dolls.

A wooden chaise longue for a summer house or a private home, which you can easily make today with your own hands, is characterized by a number of positive properties and has many advantages. Thanks to a large number advantages of a folding wooden chaise lounge for the home has gained such popularity.

The main advantages of such a piece of furniture as a DIY chaise longue are:

• Chaise lounges (like swings) have a special design, the structure of the backs, seats and armrests, which allows everyone who uses them to feel as comfortable as possible. Moreover, this applies to both semi-recumbent and semi-sitting positions, which contribute to maximum relaxation of the human body. The rocking chair also has the same characteristics, which you can also make yourself using ready-made drawings from the Internet;
• This piece of furniture can be used during sunbathing, as well as placing it under a canopy - for newborns (or dolls);
• The lightness of the materials and the primitive simplicity of the design of the sun loungers makes it possible to move this piece of furniture to any place convenient for the owner;
• Folding sun loungers, which are made by hand, are widely used today not only for their intended purpose, but also as benches for relaxation;

• Most modern sun loungers are characterized by small dimensions when they are folded - this greatly facilitates the process of storing them;
• A high-quality wooden chaise longue, which you can make yourself, is famous for its high degree of durability and has great strength.

Nowadays, using competent drawings, even an amateur in such matters has the opportunity to make a folding or hanging wooden chaise longue for a wooden house, which will be, from an aesthetic point of view, very attractive and can harmoniously complement any exterior of a house, cottage, cottage, townhouse or garden plot. The same applies to a piece of furniture such as a rocking chair, which can be placed under a canopy and used for newborns or even dolls.

Types of sun loungers

Depending on certain features of the design, all sun loungers are conditionally classified as follows:

• A monolithic product is a chair in which all components are connected to each other during the manufacturing process, figuratively speaking, “tightly” fastened. This chaise lounge for the home has an excellent level of strength and can withstand heavy loads - it is safe and indispensable in the country for newborns. However, during the operation of a piece of furniture of this type, certain difficulties and inconveniences sometimes arise. For example, in such products it is impossible to make changes regarding the angle of the backrest, they cannot be folded, and therefore the issue of moving from one place to another is a problem, and storing them is also quite problematic;

• Monolithic chairs with special inserts. This type of similar pieces of wooden furniture is characterized from the point of view of attractive appearance, quite decorative. The fact that such products have additional fragments made from different materials, reduces the level of strength and degree of reliability. At the same time, such a chair for the home looks quite aesthetically pleasing and neat;
• Portable sun loungers. Such products have special mechanisms that make it possible to simply, easily and without hassle change the position of the seats. The same applies to their configuration as a whole. A person who uses this kind of furniture has the opportunity to change the angle of the footrests, headrests or their backs. In addition, folding sun loungers are a compact load that can be easily transported, including taking on trips outside the city;
• Chairs with metal bases. The process of making such sun loungers for the home with your own hands is more complicated, so it is more profitable to purchase them ready-made. Such products are characterized by aluminum or steel frames on which durable fabric panels are attached. The advantages of this type of chair include light weight, mobility, a high degree of compactness, as well as a high level of resistance to various contaminants during operation.

Components, tools and basic materials for creating a standard chaise longue with your own hands

Today, using competent drawings, it is relatively easy to make a multifunctional and decorative chaise longue for your site or home. In addition, designs of this type are now presented on the World Wide Web, for the manufacture of which you do not need drawings with your own hands. But you will definitely have to put in some effort, theoretical knowledge and physical labor in order to create a design of this kind that is attractive in appearance and reliable in operation for spending leisure time in a country house under a canopy or for sunbathing (if there is no comfortable swing in the country house).

Chaise lounge diagram with dimensions

TO necessary tools and the components that are simply impossible to do without in the process of creating a product such as a chaise lounge for the home or a rocking chair for newborns (or for dolls) include a certain list of tools and materials.

This process cannot be done without:

• saws;
• self-tapping screws;
• wood putties;
• roulette;
• sandpaper;
• marker;
• paints of a certain (desired) color range;
• drills (preferably electric);
• square

In addition, it is impossible to make a piece of furniture such as a chaise longue or rocking chair for newborns (dolls) with your own hands without:

• wooden boards, the size of which is 400 cm x 2.5 cm × 8 cm, in the amount of four pieces;
• wooden blocks, measuring 400 cm x 5 cm x 10 cm, three pieces;
• There are two studs that are intended for fixation.

Step-by-step process of making a sun lounger

• The primary task is to create the strongest possible frame. In the process of this, it is necessary to create four parts, the material for the manufacture of which is wooden beam good quality. You need 2 longitudinal parts 215 cm long and 2 transverse parts whose length is 50 cm. Then you should make the seats. In this process, a board of wood is taken and cut evenly into bars, the length of which is 60 cm. It should be remembered that to create the structure as a whole, it is necessary to create 13 elements of this kind.
• After this, it is necessary to fix, using self-tapping screws, the frame of the future sun lounger with these segments so that the distance between them is 1 cm.

Scheme for attaching the slats to the chaise lounge frame

• The next stage is creating the legs of the product. In order to give the maximum level of stability to the structure in the area where the seat will be, double supports should be created, the length of which is 35 centimeters. They must be made from high-quality wooden blocks. In the headboard area, you can limit yourself to attaching single legs, which will have a similar length.
• Next you need to make the back. In the process of creating the frame, you should prepare two parts whose size is 88 centimeters, as well as three parts whose length will be 39 centimeters. These dimensions must be strictly observed - only in this case the frame can become part of the main structure. Moreover, small gaps should be left on all sides.
• At the next stage, it is necessary to securely fix the boards on the frame of the back of the product in the direction of the length of the chaise lounge. In order to obtain the most aesthetically pleasing appearance of the structure, the top of the planks should be rounded.
• After this, you need to attach the backrest to the base of the chair - this is necessary so that during operation it can easily change its position (be raised or lowered). During this process, it is necessary to drill holes 9 centimeters from the edge of the seat. The grooves must be made all the way through - to ensure free passage through the 2 structures.

Scheme for attaching the slats to the back of the chaise longue

• Then, using pins, you should fix the structure on 2 sides of the chaise lounge. After this, 2 grooves should be made in the base of the structure, in which the support bars will be located. As a result, this will provide the opportunity to fix the back of the lounge chair for the home in one position or another. One notch (which should measure 5 x 10 centimeters) should be made approximately 9 centimeters from where the pin is located. The location of the second groove is approximately 20 centimeters from the location of the first notch, and the dimensions of the slot should be 5 x 5 centimeters. In the first recess, it is necessary to place a support beam, the length of which is 60 centimeters, in a horizontal position. This approach will provide an opportunity to rest the back on it, i.e., it will ensure its support and fixation in a semi-sitting position. To be able to change the angle of inclination and create a semi-recumbent position, it is necessary to pull out the first beam and install the board in the second recess in a vertical position.

The process of making your own sun lounger is almost over! All that remains is to complete the final Finishing work- sand the structure with zero-grade sandpaper (you can do it manually, or you can use an electric sander) and cover the chaise longue or rocking chair for newborns or dolls with high-quality varnish or paint.

In order for a self-made chaise longue to serve as long as possible, initially all of it wooden surfaces It is advisable to thoroughly treat it with special protective liquids. This will prevent damage to the structure of the chaise lounge (or swing) during operation as a result of the aggressive action of various natural factors, which include direct sunlight, rain, high humidity, insects, etc. For these purposes, experts recommend using wood vinegar, oil, high-quality wood varnish or glaze.

For added protection and more comfortable rest sun lounger, like wooden swing for a summer residence, can be equipped with an awning. This is most necessary if products of this kind are planned to be used in areas with a hot climate or with high humidity. The process of installing the awning is simple and does not require much - just four bolts with washers and wing nuts are enough. The head of each bolt must be carefully cut off, and the end on which there is no thread must be sharpened so that it looks like a tetrahedral flat wedge. All that remains is to securely attach the fabric awning to the top of the awning and the side slats of the back of the chaise lounge (or swing) using bolts.

A chaise longue is a comfortable and lightweight chair design that is used in relaxation areas: on the beaches, by the pools, and an integral part of the decoration of the dacha. It can be used to relax after a hard day at work, caress yourself in the sun's rays or take a nap under the shade of the local trees, away from the prying eyes of ordinary people.

In this article we will talk to you about how you can make a regular wooden chaise longue, we will give examples of photographs, videos and instructions.

How to make a sun lounger with your own hands?

First we select suitable look and modification of the chaise lounge. The main material can be plastic, wood, synthetic fabric and aluminum. We chose the most affordable option for a wooden chaise lounge.

Type of wood for a sun lounger

The choice of tree is based on the following principles:

• material capabilities;
• future owner's preferences:
• garden style;
• available materials.

When choosing future wood for your chaise lounge, you pay attention to the mechanical properties of a particular type of wood. For example, the most durable wood species are considered to be: ash, oak, larch and beech. With them, the design will delight you for many years. Wood is distinguished not only by its durability, but also by its aesthetic component.

In turn, finished products made from noble wood are not the cheapest pleasure for the buyer. Such a thing is not always available to the average consumer who is trying to save every extra penny, because money is never too much. Before assembling the sun lounger with my own hands, look at the drawings of the sun lounger.

Type of wooden chaise lounge

A hand-made chaise longue will not only be an example of prudent spending of funds family budget, but will also add zest to the appearance of your fabulous country garden.

Countless drawings, projects and ready-made solutions wooden sun loungers. The dimensions of homemade sun loungers are identical to industrial models.

A folding chaise lounge is much more comfortable than a regular one. It is easy to move around the area, and in winter it can be folded and put away, even cloudy weather will not create any interference.

Preparing and making a sun lounger

Pre-purchased parts for the structures of the future sun lounger must be treated, we impregnate the wood with an antiseptic and an anti-corrosion compound. We grind the surface to a perfectly smooth state. We put the resulting details aside and begin to study the drawing.

If you turn to the latter, you will notice that crossbars are attached to the lower part of the legs. They allow you to fix the backrest in the desired position. When installing only one plank, it is first necessary to make cuts in the places where the planks are installed in increments of 5 cm, starting from 20 centimeters.

The back frame must have places for attaching bolts, we retreat from the edge on each side by 41 centimeters, and on the very base of the seat - 43 centimeters from the top.

First you need to assemble the frame for the back. The main load will be transferred to the 20 x 60 x 610 mm bar, so pay attention Special attention its consolidation. It should be recorded as efficiently as possible. It is customary to leave a distance of 1 centimeter between the slats. It will be needed to secure the fabric in the future.

Using the instructions described above, we assemble the main frame. Then, we connect 2 frames together - the back and the seat. Pay attention to the back frame, you need to drill a hole on it on both sides, the distance is 41 centimeters for the back and 43 centimeters for the seat. Screw the two parts together using nuts and bolts.

Attention! During regular use of the chair, the nuts may gradually loosen and unscrew. To avoid this problem completely, tighten the locknuts. For better fixation of the nuts, “Moment” or regular paint can be used.

To determine the degree of free play, first tighten the nut tightly and then gradually loosen it. Let the paint and glue completely set.

The next step is to mount the support for the backrest. The planks are secured with bolts and washers. Choose only thick fabric for seats, optimal choice there will be tarpaulin, canvas and denim.

The fabric blank is folded in half and stitched with an indentation of 1.5 centimeters. After this, it must be turned out. We bend a piece of fabric on one side so that the rod can be inserted and stitch it. We do the same on the other side.

We push each end of the folded fabric between the slats and insert a rod into it. We will get a tightly fixed seat, and dismantling it for washing at the same time will not cause any problems.

DIY photo of sun loungers

After a hard week of work, everyone wants to forget about business for a while. And nothing helps restore strength like relaxing in the fresh air. But first you need to find appropriate place. The thought of dragging a bed out into the street is unlikely to occur to anyone. It is much better to install a special sun lounger - a chaise longue. Wooden or plastic - it doesn't really matter. Any furniture will provide you with the most comfortable conditions for relax.

Main advantages

In terms of their functional purpose, chaise lounges are the same chairs, but more stable and with a low seat. You can relax in them in a semi-lying position, which allows you to relax your spine and all muscle groups as much as possible.

The undeniable advantage of sun loungers is their comfortable shape. The garden chair can be folded in such a way that it can be used for sitting or lying down, depending on the person’s personal preferences.

Traditionally, deck chairs for summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.

Sun loungers are ideal for observing nature as they are light weight and very comfortable. Therefore, it is not surprising that many owners install them in their gardens or dachas. Such furniture can stand outdoors throughout the summer, and winter period it can be put away in some suitable room, for example, a pantry.

More often garden loungers are made from materials such as:

• tree;
• plastic;
• rattan.

If you don't want to waste time and effort on self-assembly garden lounger, you can always order it from a furniture showroom.

Types of structures

If you have finally decided to start making a sun lounger for yourself, then first it won’t hurt you to get acquainted with the main types of sun loungers for your dacha. There are quite a lot of them, so only the most popular ones will be discussed below:

These are just some of the sun loungers that you can purchase for your summer cottage. If you wish, you can make your own chaise lounge in the form of a swing, and also using ordinary tree branches as material. It all depends on your preferences.

Making a wooden sun lounger

First, you need to prepare a certain set of materials and tools that you will need to make a homemade sun lounger:

• self-tapping screws;
• jigsaw and screwdriver;
• boards for covering the frame, 2.5 cm wide;
• timber 40x40 mm for the frame;
• corners for fastening boards (4 pcs.); wood slabs 20 mm thick.

When going to the store to buy boards and slabs, we advise you to choose material made from softwood. It withstands the negative effects of precipitation much better and has a wonderful aroma.

Stages of work

Now that you have everything you need prepared, you can proceed to assembling the wooden lounger.

First you should decide on the size of the garden chair. you can use finished drawing or create it yourself. Typically standard sun loungers measure 60 x 200 cm.

Now you can start making the frame. For it you will need bars, from which you need to make four sidewalls - two of them should be 200 cm long, and two more should be 60 cm long. The finished sidewalls must be subsequently connected to each other using fastening corners.

WITH outside the frame must be sheathed with a board 2.5 cm wide.

We take the long sidewalls and attach 4 legs to them, having first stepped back 8 cm from the edge. The legs can be made from beams 10 cm long. We use self-tapping screws to attach them to the frame.

Having finished making the frame, we begin to assemble the lattice. For it we need wooden slabs, from which we need to cut boards measuring 60 x 10 cm using a jigsaw.

We attach the boards to the chaise lounge frame using self-tapping screws. Be sure to leave a gap of about 1.5 cm between the boards. Then the lattice of the sun lounger will look neat and beautiful.

If desired, you can make a chaise lounge with an adjustable back. In this case, the lattice must be divided into two parts. One of them will serve as a lounger, and the other as a headboard. We mount both parts to the connecting boards. To securely connect elements, it is best to use door hinges.

So that the headboard can be fixed in a certain position, a transverse bar should be added to the frame structure on the inside. You need to attach a support post for the headboard to it using self-tapping screws. If you don’t have one, you can buy it at any hardware store.

Now that your homemade summer cottage is ready, all that remains is to sand the boards, cover them with drying oil or special paint and varnish material for protection against moisture.

Making a fabric lounger

If for some reason a wooden folding lounge chair is not suitable for you, then you can try making a fabric lounge chair instead.

Materials and tools

To make a chaise lounge from fabric material you will need the following:

• bolts with nuts 8 mm;
• a piece of durable fabric 200x60 cm;
• round slats 2 cm thick (one strip 700 mm long, two 650 and two 550 mm);
• rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 mm long and two 600 mm long);
• sandpaper.

To make a frame lounger, it is best to use tarpaulin, camouflage or denim fabric. They have sufficient strength and are resistant to wear.

Algorithm of actions

Now you can proceed directly to assembling the fabric lounger.

As you can see above, making a chaise lounge for a summer house from fabric is no more difficult than a similar lounge chair made from wood.

Processing of the finished product

To extend the life of your homemade garden chair, we advise you to immediately treat the material from which it was made. To do this, you can use the following compositions:

• For wood, we recommend purchasing special protective impregnations and antiseptics that will reduce negative impact external factors on the material. Wood materials are best processed before assembling the product.
• To increase the service life of a wooden chaise longue, it can be treated with paint, drying oil or varnish. It is advisable to coat the product with one of the selected products immediately after production.
• Water-repellent impregnations for fabrics. With their help, you will not only increase the wear resistance of the fabric material, but also maintain the brightness of the colors. The effect of such treatments lasts for 2-3 weeks.

Buying a garden chair

Perhaps some summer residents will not want to spend time and money making a sun lounger with their own hands. In this case, you can go to the store and buy there ready-made garden bed. The furniture showroom will offer you a variety of such products to choose from. Surely among them you will find how budget options, as well as unusual designs of designer models of sun loungers for the street.

After studying the proposed options and comparing their characteristics, all you have to do is decide on the amount you are willing to pay for a sun lounger. The cost of such sun loungers depends on the size and material of manufacture:

• wooden sun loungers will cost you between 6000−15000 rubles;
• for plastic sun loungers you will have to pay from 1500 to 9000 rubles;
• Folding frame sun loungers, which can be purchased for RUB 1,350-9,500, won’t hurt your pocket too much.

When traveling to the countryside, many are warmed by the thought that they will have the opportunity to lie in the fresh air for at least a few minutes and enjoy the surrounding nature. But everyone has the power to make their vacation more enjoyable if they prepare a place for it in advance. To do this, you must have special furniture like a chaise lounge.

The easiest way is to buy such a sun lounger at the nearest furniture store, although some owners often make their own sun loungers and thereby save a lot. You can do the same, especially since you don’t need to have special skills and knowledge to do this. Even the most ordinary wooden deck chair for a summer cottage can be made from a material that is likely to be found in any household.

But in any case, you will have to prepare for this work, because without drawings you are unlikely to be able to make exactly the chaise longue that you want, especially if you do not have the slightest experience in this matter.

A homemade chaise longue for a summer house is much preferable to a store-bought lounge chair, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end all this will be compensated by the comfort that your homemade chaise lounge will provide you with.

26.03.2017

Approaching summer season and it's time to think about creating a sun lounger with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.

Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.

Sun loungers are widely used on beaches and by pools. On personal plots, dachas.

Sun loungers are made from various materials:

• wood;
• plastic;
• aluminum;
• rattan;
• PVC pipes;
• durable fabric.

Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.

Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.

Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.

Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.

In this article we will tell you how to create wooden sun loungers with your own hands.

To ensure the longevity of the effort expended, the materials used must be processed.

Antiseptics and special impregnations will help protect wood from moisture, harmful insects, rot, and mold. It is better to carry out processing before assembling the structure.

After installing the sunbed, the wooden parts should be coated with primer, drying oil, varnish or paint. This will extend the life of your masterpiece.

Fabrics should also be protected from rain and sun. Water-repellent impregnations will help preserve their brightness and service. Their effect lasts 2-4 weeks.

And, of course, remember the famous Russian proverb when working. Measure seven times, cut once.

Monolithic chaise lounge made of wood

Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.

You will need tools:

• electric jigsaw or hacksaw;
• drill;
• screwdriver;
• self-tapping screws;
• fine grain sandpaper;
• spirit level;
• roulette.

When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:

• glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
• boards 0.25 cm thick.
• wooden beam with a square section of 50x50 mm;
• 4 wheels with a diameter of 10cm;
• corners for strengthening the bed;
• door hinges;
• varnish or paint.

We suggest you make a chaise lounge according to this pattern.

Legend:

1. Front legs.
2. Hind legs.
3. Bearing longitudinal.
4. Back support.
5. Back support.
6. Bearing transverse.
7. Fixing bar.
8. Backrest support.
9. Wheels.
10. End beam.
11. Back slats.
12. Seat slats.
13. The support beam is transverse.
14. Fixing bar.

You can independently determine the size of the desired sun lounger and make calculations. Or use standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Assembling a chaise lounge on wheels

We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.

We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.

Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.

We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.

All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.

For a more comfortable stay, you can sew additional mattresses that fit the size of the bed.

Simple sun lounger

To create a wooden chaise lounge with your own hands, you need the following materials, as well as tools:

• tape measure and square;
• pencil;
• saw;
• electric drill;
• screwdriver or screwdriver;
• screws, self-tapping screws and studs for fixation;
• sandpaper or grinder;
• wood putty;
• dye.

Wooden beams used in the work:

• for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
• 2 longitudinal bars for a frame 215 cm long;
• 2 cross beams -50 cm;
• 6 legs -35 cm;
• 13 slats for a seat measuring 2.5 x 8 x 60 cm;
• 6 slats for the back - 2.5? 8? 88 cm.

The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.

Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.

We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you

We make the back from 2 boards measuring 88 cm and 3 boards measuring 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.

We securely fasten the longitudinal strips. We round them for a more beautiful look.

Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.

We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.

A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.

Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.

DIY garden lounger video

Fabric chaise lounge

A chair with a frame complemented with fabric is one of the most comfortable budget types sun loungers. It is convenient to fold and easy to carry. Can be stored flat. It takes up little space.

To create a sun lounger with your own hands you will need:

• bolts, nuts with a diameter of 8 cm;
• small nails with round heads;
• round sticks (1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
• rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
• needle file, fine-grain sandpaper;
• glue;
• durable material measuring 200 by 50 cm.

Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:

• birch;
• oak;
• beech.

Choose fabrics with maximum strength. Great fit:

• teak for mattresses;
• tarpaulin;
• canvas;
• camouflage;
• denim

These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:

• A.1200x600 mm.
• B.1100x550 mm.
• H.650x620 mm.

Cut the boards to the required length. We sand with sandpaper.

In the longitudinal bars we make indents of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Sand with a round file.

We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.

According to the diagram, we drill holes in the bars to connect the parts.

Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.

Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.

We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.

ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.

DIY fabric chaise lounge. Model 2

For this chair you will need:

• wooden slats measuring 2x4 cm. Two slats each with a length of 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
• slats measuring 2x6 cm. One each 61 and 57 cm;
• 65cm wooden rod with a diameter of 1.2cm;
• a piece of fabric 137 cm long and 116 cm wide;
• bolts, washers, nuts, screws;
• glue;
• round needle file, sandpaper or grinder;
• electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.

Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.

On the seat frame, step back 43cm from the top. Make holes.

On the piece supporting the back, drill holes in the center of the edges.

Process all holes with a round file.

Model installation

First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.

Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.

ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.

Install the back support piece using washers and bolts.

Sand away all imperfections. If desired, varnish or paint.

Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.

Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.

Chaise lounge made of polyvinyl chloride

Another example of a lounger with a fabric base. Only in this case, wooden slats are replaced with PVC pipes. Chair sizes may vary.

In this do-it-yourself chaise lounge model we used:

• 2-inch polyvinyl chloride pipes;
• L-shaped connectors – 8 pieces;
• T-shaped connectors – 6 pieces.

First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.

Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.

Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you get a rectangle within a rectangle.

The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.

Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.

Portable lounge chair

The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.

The collapsible chair consists of 2 parts:

• backrest covered with dense, wear-resistant fabric;
• wooden seat.

In addition to tools, the following materials are used:

• 2 legs for the backrest measuring 20x40x800mm;
• 2 legs for the seat - 20x40x560mm;
• 2 lower crossbars - 10x50x380mm;
• 1 top crossbar - 10x40x380mm;
• 1 seat crossbar - 20x40x300mm;
• 5 slats - 20x40x400mm;
• piece of material - 600x500mm.

The procedure for assembling a portable sun lounger is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.

We connect the back and seat of the chaise lounge.

Enjoying your holiday in your new armchair.

Pay attention to another interesting chaise lounge model in the video.

Kentucky chair

You can make the original look of a chaise lounge with your own hands. A sun lounger is assembled from bars. Convenient, easy to fold. Takes up minimal storage space.

For the chair you will need:

• 4mm galvanized wire;
• 16 staples;
• bars 30x55 mm.

Before starting assembly, it is recommended to treat the bars to protect them from ultraviolet rays, humidity. Choose an oil- and wax-based stain. Beitz is good. You can take parquet oil. Apply the product using a spray bottle or brush.

Kentucky chair installation

Drill the holes. Their diameter should be slightly wider than the thickness of the galvanized wire. Sand all rough spots and imperfections.

Fold the parts according to the photo and start stringing the boards onto the wire.

Secure it with brackets.

ADVICE. Instead of wire, use galvanized studs. They are secured with nuts and washers.

Raise the planks. The Kentucky chair is ready for use.

Original chaise lounge

Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.

To create a lounger you will need the following materials. And also tools:

• 2 sheets of plywood 2cm thick with a size of 160x180cm;
• 6 round strips with a diameter of 30mm and a length of 92cm;
• 12 planks made from leftover plywood measuring 94x10cm;
• dense fabric with a width of 92 cm;
• construction adhesive;
• screws;
• roulette;
• cardboard for layout;
• Circular Saw;
• electric drill.

Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.

We transfer the drawing onto sheets of plywood and cut out the side parts with a circular or band saw. At the junction with the round beam, we cut out recesses with a diameter of 30mm.

We sand all the unevenness and cutting defects.

We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.

We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.

We sand the product again. Now we hide the assembly flaws.

Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.

You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.

Birch lounger

It must be said that our Russian craftsmen are distinguished by their ingenuity and creative approach. This chaise lounge is made by hand from birch logs. It is distinguished by Russian folk flavor. Perfect for garden plots.

The work uses:

• logs with a diameter of 75-120mm;
• drill and set of drills;
• electric saw;
• staples and screws;
• marker;
• electrical tape or chalk for drawing.

Let's start creating a sun lounger.

We saw the trunk into logs 45 cm long.

On the floor we draw a line for the future sunbed using chalk, or glue it with electrical tape.

We lay the logs according to the diagram. We drill holes with a drill and connect the logs using long self-tapping screws. We use a socket wrench for this.

Turn over the almost finished product. We are testing. We eliminate shortcomings.

For greater stability, we fix the back side of the lounger with brackets.

A monolithic birch chaise lounge is ready to delight you and your guests.

Unusual do-it-yourself sunbed for a summer house

Pallet lounger

One of the most budget-friendly sun loungers is made by yourself with skillful hands from pallets. What it is? A pallet or pallet is a stand that is designed to transport cargo.

DIY pallet lounger video.

Now you have several options for making your own sun loungers. Choose a design that is convenient for you, or affordable. When choosing sizes, keep in mind that in addition to you, your wife and your children will also rest on the sunbed. Adjust the width and height to suit your overall needs.