On a white plastic window sill, dirt and stains are very noticeable. Stains on plastic that have appeared a long time ago are more difficult to remove, but you can get rid of them if you have patience and some cleaning products. household chemicals. If the stains are of chemical origin, for example, left after repairs, then you need to deal with them by special means. In other cases they help traditional methods removing contaminants.

You should first try to wash the window sill with a regular soap solution. This will work if the stains are not too old. If this method is not effective, dishwashing detergent may help. But it will take a long time to wash it off, since it is strongly ingrained, and in addition, it is unsafe if there are small children at home.

Cleaning powders are suitable if the window sill is made of laminated plastic. It is convenient to use a sprayer for washing window sills: it does not come into contact with your hands and does not damage the skin. But it is not suitable for allergy sufferers, since vapors of the substance are sprayed into the air and enter the lungs. Nebulizers may also cause reactions in people with pulmonary diseases.

The most difficult gap to clean is the one located under the frame. It accumulates a huge amount of dust and dirt, so a regular sponge is not suitable for cleaning. This is where an old toothbrush comes to the rescue, the bristles of which penetrate as deeply as possible.

An important point is the choice of washing accessories. A soft microfiber sponge, cotton or fleece cloth will do. A rough surface will require a stiffer sponge or brush. But you should not use a metal scraper, as it will leave scratches.

Household chemicals for cleaning window sills

When a problem such as stains and dirt on the windowsill arises, household chemicals immediately come to mind. It works quickly and effectively, so you don’t have to spend hours scrubbing the surface of stubborn stains. Cleaning products are quite easy to buy in any store; there is a large selection of them. The most intense and effective are:

• Mister proper. It is also intended for window sills made of plastic. Available in the form of loose powder and gel with abrasive particles. Dissolves in water, take about 3 tbsp for 5 liters. l. Surfaces are treated with it. After some time it washes off warm water using a soft cloth. It is important to rinse very thoroughly detergent from the surface, otherwise dust will stick to it.
• Another universal product, Cillit Bang, is suitable for plastic surfaces. Conveniently, it comes in the form of a spray liquid. It is enough to apply it to the surface to be cleaned and leave for 15-20 minutes. Afterwards, lightly wipe and rinse with plenty of warm water. It is recommended to ventilate the premises when using the product, as it has a strong odor.
• If the window sill is covered with greasy stains and soot, Sanita for the kitchen is suitable; it can easily remove rust from plastic. Like Cillit Bang, Sanita has a strong odor, so be sure to open the window while cleaning. After application, this product is left for 30 minutes and washed off. hot water.
• The popular Domestos product will cope with difficult stains on the windowsill. It also has an antibacterial effect. But like any other cleaning product, it must be thoroughly rinsed off the surface after use.
• The most forgiving of all household products- Pemolux. It is not suitable for severe contamination, but does not have a pronounced odor and contains safer substances. In this case, you can perform the procedures without rubber gloves.
• The very caustic product Cosmofen-10 will cope with almost any contaminant, but it should only be used with rubber gloves, having first put on a respirator.

In addition to expensive household chemicals, you can also use regular laundry detergent, antibacterial wipes, or laundry soap to clean kitchen surfaces. The effect will be less pronounced and more effort will have to be spent, but they are safer.

Whitening a window sill with folk remedies

Folk remedies are suitable if allergy sufferers or small children live at home. Such products are inexpensive, and most of them can be prepared at home.

Folk methods for bleaching window sills use substances that are easy to find at your nearest hardware store. Before use, you need to make sure that the product will not corrode the plastic - just moisten the edge of the fabric in the cleaning product prepared for cleaning, and then touch it to the corner of the window sill to observe the reaction.

Mixture of powder and soda

A popular mixture among housewives is washing powder and soda - you need to take each product in a 1:1 ratio and apply the mixture to the stain, then wipe with rotational movements and rinse. For the latter, it is convenient to use a cotton rag slightly moistened with water.

There is no need to vigorously rinse the surface to be cleaned. When treating the surface, do not use hard sponges; a soft rag or cotton pad is sufficient.

A well-known household remedy is a mixture of soda and vinegar. Many housewives use it to remove stagnant stains in everyday life. A small amount of soda is applied to the windowsill, then rubbed with a sponge dipped in vinegar. You can apply baking soda and vinegar to the surface to be cleaned and leave for 15 minutes. The soda also needs to be washed off thoroughly and not left for a long time, as white spots may appear after it.

Alcohol and acetone

Alcohol effectively copes with different types contamination, but it also requires the use of rubber gloves. Alcohol evaporates quickly, so the room must be ventilated, and to wash off the alcohol, just wipe the surface with a damp cloth once.

Some housewives prefer to use acetone for cleaning. It will cope with almost any dirt or stain, but it evaporates quickly and is toxic. Sometimes nail polish remover is used instead. Acetone should be applied to the surface carefully as it tends to react with some plastics and paints that are applied to it. In order to clean the dirt, you need to moisten a cotton pad or cloth and wipe the window sill.

Tooth powder and soap

There is a fairly simple remedy that makes it easy - a mixture of tooth powder and laundry soap. It does not require increased caution; its components can be used both together and separately. After application, wipe the window sill with a slightly damp cloth.

By applying tooth powder to the smooth surface of the plastic, you should avoid scratching and damaging the window sill coating. If the surface is rough, you can rub the tooth powder harder, since these surfaces are more difficult to clean.

Hydrogen peroxide

Hydrogen peroxide works on most household stains. It is most suitable for washing away soot, grease stains and yellow discoloration. Simply moisten the surface to be cleaned with the solution and then rinse off. More faster remedy You can do it if you make a paste of peroxide with the addition of baking soda. It needs to be applied to the dirt, and after a while lightly wiped.

A more aggressive composition is peroxide mixed with a stain remover; this product must be diluted with water and washed off thoroughly after application. After mixing the components of the mixture in a 1:1 ratio, you need to add the same amount of water as the mixture. It is better to rinse off with warm water.

Removing stains left after construction

During construction or renovation, various types of contamination remain on the window sills. chemical composition. These include all kinds of solutions, old traces of glue on tape, and plaster.

In the case of stains left after building mixtures, you should use special solvents from a hardware store, but they can seriously damage the surface of the plastic window sill. To remove each type of stain, it is worth trying traditional methods.

Scotch

To remove tape stains, you can use the following methods:

• You can remove such contamination using the same tape. Just glue a fresh piece and remove it with a sharp movement. It will take several repetitions of this technique.
• Another way - vegetable oil. Apply it with a sponge to the surface to be cleaned and leave for 10 minutes, after which the dirt is washed off with simple movements.
• Medical alcohol is also suitable for this task. It also needs to be applied to the stain, left for a while and wiped.
• Fresh traces of tape can also be removed with an eraser.

Dye

Paint marks are also a common type of stain. Stains often appear when painting windows or window slopes. You can wash it off using several means. It is worth noting that the paint can be different, and it is most effective to use a specially designed or simply suitable solvent to wash off the paint.

If this is, for example, alkyd enamel, then use acetone, silicate glue or gasoline as a solvent. If it is water-based paint, then it is easy to wash it off with water, with a little more effort. For rinsing water-based paint The water needs to be heated, you can prepare a soap solution.

Polyurethane foam

Polyurethane foam is used when installing a window. After repairs, traces of it remain, since it is impossible to calculate the exact amount, and craftsmen rarely clean up after themselves. When it ages, it greatly spoils the appearance of the new window. Cosmofen is the most suitable product for frozen foam. But pre-hardened foam must be removed as much as possible using a utility knife.

Clean the surface from polyurethane foam You can also use Dimexide - this is a medical drug. It is applied to the dirt and after a few minutes is washed off with a washcloth or hard sponge. A specially designed solvent is also used to remove stains. As a rule, it is safe not only for plastic, but also for skin.

Plaster, cement

Cement and plaster are removed using warm soapy water or vinegar. This is quite enough to effectively wash everything. But under no circumstances should you rub vigorously because plaster products contain abrasives, such as sand, which can leave scratches.

First, frozen pieces of cement or plaster must be torn off from the surface. Traces left by hardened cement or plaster can be easily whitened by placing a damp cloth on them for 5 minutes and then wiping.

If household chemicals are used, they must be washed off with plenty of water. Use only products that are specifically designed for plastic. It is almost impossible to remove marks from hot dishes, so they should not be placed on the windowsill. And for flower pots it is better to buy special PVC napkins - this will protect the window sill from drips. To remove traces of pencils, markers or chalk, you can simply moisten it with water, squeeze it a little and wipe it.

Modern windows are beautiful and practical. They don't require special care, isolate the apartment from noise and retain heat. But no matter how carefully you treat the metal-plastic structure, over time, smudges and yellowing appear on it. Then every housewife begins to look for a method on how to clean plastic window sill from stains so that it becomes like new again.

What are the types of stains on the windowsill?

To avoid having to think longer about how to remove stains from plastic window sills, wipe the dust off them daily with a dry soft cloth and wash them once a week with water and some cleaning products.

1. To eliminate light stains, dissolve a spoonful of dishwashing gel or a little regular powder in 1 liter of warm water.
2. Stir thoroughly until foam forms, soak a sponge in it and walk along the windowsill.
3. Then remove the foam with a damp cloth and wipe the surface dry.

When a room or kitchen undergoes renovation, the question of how to clean a plastic window sill from stains and dirt becomes more pressing. Dust and construction dirt accumulate on it in huge quantities, and serious means are needed to remove it.

Most often, housewives encounter the following marks on the surface of the window sill:

• yellow blots left after watering flower pots;
• traces of grease and stubborn stains from dirt and rust;
• contamination from glue or adhesive tape;
• frozen drops of primer, polyurethane foam and stains from other repair work.

If there is a child in the house, most likely you will need a product on how to remove stains from a plastic window sill from crayons, markers or pencils.

What you need for cleaning

The surface of window sills varies. Smooth plastic, easy to clean regular sponge from . But if the texture of the window sill is porous or rough, small particles of dust get stuck in it and are more difficult to wipe off. Use a stiff sponge or brush.

Do not use metal scrapers or abrasive materials for cleaning; they leave behind micro-scratches that spoil the appearance of the window sill and collect various dirt.

A large amount of dirty residue usually collects in the cracks under the frame, and it is difficult to soak it and remove it with a simple sponge. How to clean plastic from stains in hard-to-reach places? Take a toothbrush that has become unusable, wet its bristles with water, scoop up the cleaning agent with them, thoroughly treat the surface and rinse off the powder.

Which purchased products are best to use?

Before you remove stains from a plastic window sill, you need to choose an effective product. Modern household chemicals offer a huge selection in this area.

1. Proper. The universal product is sold in liquid and powder form. The composition of the drug is ideal for washing a plastic window sill. Dilute 3 tbsp. l. powder in 5 liters of warm water, stir, wipe the contaminated surface and do not forget to rinse the composition with clean water afterwards.
2. Cillit Bang. The product has a pungent odor. It is sprayed onto the plastic, wiped with a sponge, left for a quarter of an hour and removed with a damp cloth. This type of cleansing is good at destroying yellow stains from water, coffee stains and other household contaminants.
3. "Domestos". With its help, you can not only solve the problem of how to wash a plastic window sill from stubborn stains, but also whiten its surface. Apply the substance to a washcloth, scrub the white plastic thoroughly with it, leave for 15 minutes to soak the dirt, and rinse with water. This method can easily get rid of stubborn rust marks.
4. "Sanita." It dissolves grease from the windowsill well, although it has a pungent odor. Apply the gel to the surface, rub it over all corners of the window sill, especially carefully treating greasy blots, and after half an hour, remove the product with water and a rag.
5. "Pemolux". This gentle cream is suitable for cleansing fresh, small stains. Apply it to the stain, rub it with a dry cloth and, if the stain is not removed, repeat the procedure again.
6. Cosmofen 10. This is a drug for those who need to wipe off complex old stains from a plastic window sill. Apply the composition to a napkin, clean the dirt with it and wash the windowsill with water. The drug is toxic, so wear a respirator and ventilate the room after treatment.

Important! Don't forget to wear rubber gloves when using caustic products to avoid damaging your hands.

Effective folk methods

When children or people with allergies live in an apartment, the question of how to wash stains on a plastic window sill is very pressing. Not suitable for them chemical substances, so it’s better to pay attention to effective folk methods. Among the available tools you will find useful:

• household soap;
• soda;
• chalk or tooth powder;
• food vinegar.

The easiest way to clean a plastic window sill from yellow spots, - soap solution. Stir in 1 liter hot water 50 g household soap and wash the white plastic with this liquid as thoroughly as possible. Yellow marks, which often appear from water and soot, will disappear without a trace.

How to clean a window sill from yellow stains and whiten it with chalk or dental powder?

1. Grind the chalk into dust, measure out 1 tbsp. l. product and pour a little water into it. You should get a homogeneous paste.
2. Apply it to the windowsill, rub gently and rinse with water.
3. Tooth powder is used in the same way.

Old stains can be scrubbed off with a mixture of baking soda and vinegar. Sprinkle baking soda on the dirt, soak a cloth in vinegar, blot the stained area with it, clean and rinse with water. When using this method, be careful not to leave the baking soda on the plastic for more than 5 minutes. It tends to eat away color, so white spots may form on the windowsill that differ from the main shade of the plastic.

Yellow stains from flower pots can be treated with hydrogen peroxide and after 2-3 minutes, wash the surface with water.

How to wash plastic after repair

During repairs, all people try to protect the window and window sill from dirt. But sometimes blots of primer or polyurethane foam end up on the plastic. How to remove stains on a plastic window sill after construction work?

1. First of all, remove the plugs to prevent dust from accumulating in them, and sweep away all debris with a dry cloth.
2. Then wash the window sill with soapy water or powder.
3. If you need to know how to clean a plastic window sill from stains and dirt from primer or plaster, use cleaning products with mild abrasive substances.
4. Treat the stain with the desired gel or cream and wait a few minutes.
5. Using a rubber spatula, carefully pry up the softened primer and wash the window sill with clean water.

Polyurethane foam is difficult to clean. If it has dried out, cut off the top with a sharp knife, and generously apply Sanita or another strong preparation to the remains. After 30 minutes, the foam will be saturated, become softer, and it can be removed with a spatula, and the remains can be scraped off with a hard-bristled brush.

When you need to remove yellow stains from tape or glue from a plastic window sill, try White Spirit. Soak a cotton swab in it, gently wipe the sticky area and immediately rinse it with water. Use solvent with caution; some types of plastic may turn slightly yellow when in contact with it.

Gentle care: the basic rule of a clean window sill

So that you don’t have to spend a long time looking for something to remove stains on plastic, remove dirt before it has time to become embedded in the material. Fresh blots can be easily wiped off with a damp sponge and soap.

1. After using household chemicals, do not forget to rinse the surface with water large quantities. This will get rid of streaks and prevent yellowing from appearing.
2. For cleaning, use only products designed for plastic.
3. Don't put it on plastic hot dishes, traces of it are almost impossible to remove.
4. It is advisable to place oilcloth napkins under flower pots. This will decorate the kitchen and room, and protect the window sill from smudges.

Children's drawings with crayons, pencils or markers are removed with a melamine sponge. You just need to moisten it with water, squeeze it lightly and wipe the stained area.

If you cannot use anything to clean the plastic window sill from yellow stubborn stains or scratches appear on it, call a plastic window service specialist. A professional will quickly polish the surface of the window sill and get rid of old dirt.

Yellowed window plastic can be washed off with soapy water, ammonia, bleach or hydrogen peroxide. There are special kits on sale for the care of plastic windows, they include a napkin, detergent for PVC, lubricant for fittings and a composition for protecting seals. Acetone, concentrated acids and alkalis can ruin the profile, so their use is not recommended, the same applies to all kinds of cleaning powders. We will tell you how and how to clean plastic windows from yellowness in our article.

The completed renovation is always a holiday; the eye rejoices, contemplating the whiteness of the new plastic windows. However, what is it? Six months later, the frame turned yellow and became stained. There are several reasons for this:

• Low quality window profile. In the production process of PVC, complex technologies are used; the plastic contains more than ten components responsible for the strength and color of the material.
• Titanium dioxide gives PVC a snow-white color, the stability of which depends on the quality of the powder; many manufacturers, wanting to save money, purchase low-quality raw materials and after 2-3 years the profile begins to turn yellow.
• PVC also contains special light stabilizers (obtained from benzophenone or benzotriazole), they protect the profile from solar radiation and the action of free radicals. Thanks to these substances, the rate of light aging of the material slows down several times, the frames do not turn yellow or fade.
• Weather. Due to sudden changes in temperature, the physical properties material, the polymer may change color or even crack. This only applies to cheap profiles manufactured by fly-by-night companies.
• Choose plastic windows from well-known manufacturers who have been on the market for a long time and offer a guarantee for their product. For example: Veka, KBE,Proplex,MONTBLANC, Salamander,Rehau, Kaleva,Deceuninck, SOK etc.
• It is unwise to save on such things, because a high-quality plastic window will serve you for 30-50 years and will look snow-white for many years.
• The yellowness of bad plastic cannot be washed off - these are changes in the molecular structure of the material that cannot be bleached; all that remains is to get used to the new shade of the windows and hope that the profile will not become stained over time.

• Kitchen frames often turn yellow from exposure to soot and greasy fumes during cooking. If people smoke in the room, not only the windows and curtains turn yellow, but everything around them turns yellow. These two types of stains are not dangerous and can be easily washed with soap and water.
• Improper care- a fairly common reason for the yellowness of the profile; in the pursuit of cleanliness, housewives sometimes use: acids, strong alkalis, all kinds of cleaning powders and solvents. All these products gradually destroy the material, which leads to scratches, loss of gloss and yellowing of the surface.

If you have recently completed a renovation, then you may be interested in how and how.

What you can and cannot wash plastic windows with

Let's first figure out what you can't wash plastic windows with in order to avoid annoying mistakes.

1. Abrasives: metal grid or brush, cleaning powders. All this leaves micro-scratches on the plastic profile, into which dust and dirt become clogged over time, causing dirty spots to appear that are very difficult to clean. Do not use abrasives, even if it seems to you that the window is too dirty, it is better to apply a soapy composition and let it sit for half an hour, after which the dirty coating will be easily washed off.
2. Should not be used for cleaning under any circumstances. plastic profile acetone, solvent No. 647 and No. 648, they corrode plastic.
3. Polyvinyl chloride is resistant to acids and alkalis, but the protective glossy layer on the surface of the profile can be destroyed under the influence of these substances, and the window will lose its attractive appearance.
4. ? No no and one more time no! It copes well with any type of dirt, but leaves micro-scratches on the surface, which will later fill with dirt and ruin appearance window.

You should not wash windows with hot water, as this will cause the plastic to become cloudy or yellow; cool water and detergent washes everything well.

How to remove yellowness from plastic windows?

Soap solution

These products help remove yellow discoloration, and the manufacturers themselves recommend using them absolutely harmlessly: laundry soap, dishwashing liquid or washing powder. For work you will need a soft cloth, sponge or microfiber cloth.

Dissolve soap shavings, dishwashing gel or powder in water, apply to the profile and rub a little, rinse. If any dirt remains, lather the plastic again and leave for 15-30 minutes.

Rinse off the remaining product with a damp cloth and wipe the profile so that any remaining moisture does not seep between the glass panes. This way you can wash off fumes, soot, greasy deposits, yellowness from nicotine and most other household contaminants.

Advice: before using any home remedy, test it on an inconspicuous area of ​​the profile; you should be alerted by a change in the color or texture of the plastic, loss of shine. If such changes appear, then this remedy should not be used.

Alcohol, ammonia, bleach, hydrogen peroxide

Dampen a cloth in one of the suggested products and gently wipe the surface of the frame and window sill. Don't forget to wipe the plastic with a damp cloth after a few minutes. You can also wipe glass with ammonia; in addition, it washes away yellowness and gives the surface a beautiful, even shine, and also helps.

Windowsill

A mixture of perhydrol and powder bleach will help whiten a yellowed window sill. You should not heat perhydrol; use cold water. Dissolve a tablespoon of both in half a liter of water. Apply the resulting mixture to the windowsill, rub thoroughly and rinse. If not everything has been washed, repeat again.

Restoration gel « Retrobright"

A video recipe for this gel was found on one of the forums where org repair specialists gather. technicians, thrift store owners and restorers. " Retrobright» used for bleaching consoles, computer cases and set-top boxes, keyboards and other plastic parts that have turned yellow from time to time.

This product is very strong and can hardly be used on new PVC windows. But it will simply be a salvation if you have moved into a rented apartment and the previous tenants left you old refrigerator, yellowed windows and stained with grease kitchen furniture, everything is not particularly dear to the heart, but very dirty.

To prepare the pasta we will need:

1. Vanish OXI Action
2. Hydrogen peroxide 32% – 100 g.
3. Water – 200 gr.
4. Potato or corn starch - 4 teaspoons
5. An unnecessary vessel, a glass jar, a couple of glasses and a plastic spoon (the metal reacts with the product, and we don’t need that), cling film, tape.

Hydrogen peroxide 32% cannot be found in a regular pharmacy, but you can buy it in a specialized store that sells chemical reagents for laboratories or order it on the Internet.

Be careful and wear rubber gloves when working with reagents, because such peroxide can leave a chemical burn on the skin.

Quarter teaspoon Vanish OXI Action dissolve in 25 ml. warm water. We dilute 4 teaspoons of starch (with a slide) in 100 g. cold water, stir well. Pour the resulting mixture into a ladle with preheated water (75 g). Heat the mixture, stirring constantly, after a while the starch will thicken. We need the consistency of thick semolina porridge. When the desired thickness is achieved, turn off the gas and transfer the paste to glass jar.

Stirring continuously, add 100 g to the gel. peroxide. When a homogeneous consistency is achieved, pour into a container Vanish and mix thoroughly again. Using a brush, apply the gel to plastic frame and attach cling film on top with tape so that the composition does not dry out.

Attention: “Retrobright” exposure time is 12-24 hours. In the case of windows, this time is reduced. Ultraviolet light should not reach the composition, so the gel is left overnight and washed off early in the morning with a damp cloth. Plastic parts of refrigerators or keyboard buttons can be left wrapped in film for a day or even more.

Industrial products

How to clean plastic windows from yellowness using household chemicals. There is a wide selection of industrial products for caring for plastic windows:

To clean the PVC profile, it is sold in a kit, which also includes a product for caring for the rubber seal and lubricant for window fittings. “Phenozol” has an antibacterial effect, relieves static tension, is non-flammable, harmless to the skin of the hands, and biodegradable.

The prophylactic set “Phenozol” is recommended to be used twice a year. This will allow you to wash the profile, ensure easy opening of the window and extend the service life of the rubber seals. The product is applied to the frames and washed off with a damp cloth. The set includes:

• FENOSOL (100 ml.) – neutral detergent composition for profiles, free of aggressive substances and solvents. Thanks to the antistatic effect, dust and soot do not settle on the washed profile for a long time. For PVC and aluminum profiles.
• FENOFLEX (50 ml.) – a product that maintains the elasticity of rubber seals and prevents premature wear. Seals are lubricated in spring and autumn, so the rubber does not freeze in winter and does not overheat in summer.
• FENOSOL (20 ml.) – aerosol lubricant for fittings. Softens friction and protects metal from corrosion. The oil has no odor and does not contain acids or resins.

In addition to "Phenozol" good feedback deserve the funds: " Amway L.O.C.», « PROFOAM 1000», « Spezial-Reiniger», « Mellerud», « Mr Muscle», « REHAU», « Cif cream», « MEINE LIEBE».

"COSMOFEN 20"– cleaner for PVC profiles (it is worth warning the reader that this product destroys a thin layer of plastic at the molecular level, thereby removing residual dirt and yellowness). Therefore, pay attention to the number after the name; the larger it is, the less aggressive the product. “COSMOFEN 5” is a strong solvent, used in production as a polish for polyvinyl chloride, and also by professional builders to remove scratches, cracks and friction marks from plastic surfaces. For regular cleaning, choose twenty and use no more than twice a year. A yellowed window sill can also be treated with Cosmofen or another solvent: "White Spirit", "Defender 30504"

Remember that before using any cleaner (solvent) for plastic, the window must be thoroughly washed with soapy water.

If none of the above helped and the windows are still frankly yellow, then the last resort remains - painting. There are special paints for plastic on sale; in the absence of one, you can use nitro paint or auto enamel.

Anastasia, September 1, 2016.

After repairs and installation of new double-glazed windows, they must be cleaned. To make the process of washing windows go quickly and successfully, I suggest you figure out how to clean plastic windows and window sills with your own hands at home.

Cleaning the frame and window sill

Oddly enough, it is recommended to start washing plastic windows from the profile and window sill. This is due to the fact that during the cleaning process, already cleaned glass can be accidentally stained, so it is necessary to clean the window sill of a plastic window first.

Despite the fact that plastic seems to be a very durable material, not every detergent can be used. What cleaning tools and products should not be used and how to remove stains from plastic window sills?

5 prohibited drugs

Can be used for washing plastic store products(price depends on the manufacturer), or hand-prepared mixtures. But it is imperative to take into account that the composition of this or that product should not contain aggressive substances.

So, what means should you definitely not use?:

Image		Recommendations
		Means 1. Abrasive powders
		Remedy 2. Solvents and acids Do not treat the surface with solvents or substances that contain acid. They simply corrode the material. Before use, check the composition of the cleaners for acetone and chlorine.
		Remedy 3. Wax It is highly undesirable to rub profiles with wax polishes. The frame will become covered with greasy yellow stains that are almost impossible to remove.
		Remedy 4. Pharmacy products Use ammonia, hydrogen peroxide, Activated carbon- forbidden. They have a detrimental effect on PVC materials.
	Remedy 5. Sharp objects Plastic will not survive active mechanical treatment, so you can’t use steel wool or sharp tools for cleaning either.

5 methods on how and what to clean windows with

Windows need to be cleaned regularly. Both after installation and during routine cleaning. If you don't wipe them, then throughput glass may decrease by 10%, and the frames will become covered with stubborn stains. In such a situation, not a single product for plastic window sills and windows can help.

Instructions presented in the table will tell you what you can use and how to wash plastic window sills from stains:

Image	Type of pollution
	Method 1 Scotch tape marks can be removed if applied: Scotch. Apply a fresh piece of tape to the stain and quickly tear it off. Oil. Apply vegetable oil to the desired area and leave for 10 minutes. Then wipe with a napkin. Vodka. Wipe sticky marks with a cotton swab dipped in vodka. Eraser. Erase the fresh mark with a stationery eraser. Using the same methods, you can remove marks left after removing the protective film.
	Method 2. Paint spots are removed perfectly if you take: Silicate based adhesive. You can clean plastic windows from small drops of paint by applying a little silicate glue to them. It will dry and pull the paint off with it. Nail polish remover. Soak a cotton swab in the product and apply to the area for 5 minutes. Use a rubber spatula to remove any residue. Make sure that these substances do not contain acetone.
	Method 3 Traces from polyurethane foam easy to remove: Rubber scraper. Dimexide. Treat the dried foam with dimexide and leave for 3 minutes. Remove any remaining residue with a damp sponge. Harmless solvent. You can use a special store-bought solvent for plastic items.
	Method 4. Soot and soot - such spots on plastic windows Easily removes with regular soap solution. Mix 10 gr. grated laundry soap and 200 ml of water, then thoroughly wipe the surfaces.
	Method 5 Traces from yellow spots and “building” materials- can be removed with soapy water. For better results, you can use dishwashing detergent.

Cleaning glass

We found out how to clean stains on a plastic window sill and profile. Now let's look at how to properly wash glass. The algorithm is quite simple:

1. Use a clean sponge dipped in water to remove dust and dirt from the surface.
2. After treatment with a sponge, windows should be sprayed with a cleaner and wiped from top to bottom, adhering to one direction of movement.

1. At the last stage, the glass is rubbed with flannel or newspapers until shiny.

The table contains a list of the most effective means that clean glass without streaks:

Image	Means
	Shop Sprayer Spray the surface with it and wipe with flannel. It is enough to do this 1 time.
	Water + starch/chalk/vodka Add any of the following components to the water. After this cleaning, the glass will shine.
	Onion You can easily remove insect marks with half onions. Simply wipe the stains and rinse with water.

conclusions

We found out how to quickly clean profiles and wash glass. I hope that now you won’t have to set up for a long time, but will get to work with ease. The video in this article will clearly show the effectiveness of some remedies. If you have your own recipes for cleaning plastic window sills and glass, I would be grateful if you voice them in the comments!

Whitening yellowed plastic is the housewife’s primary task. Preliminary preparation and the right cleaning products will make the process easier.

Required condition in preparation for bleaching - cleaning from existing dirt, grease, dust. To do this, you will need detergent, which can be purchased at the supermarket or market. In order not to disturb the structure during processing, it is necessary to use soft fabric sponges, napkins or thick rags. Wipes can be dry or treated with special cleaning agents.

Clean plastic

Contamination on the plastic may be of various origins. And each of them requires a special approach to elimination.

From yellow plaque or fat

A competent choice of solution for cleaning plastic products from yellowness and greasy stains will make the procedure easier.

It must be remembered that to wash this material you cannot use powdered products, brushes, or scrapers, as they can damage the surface.

Wash greasy spots you can use:

1. Apply detergent to a soft cloth and wipe Right place, leave for 10 minutes, rinse.
2. Melamine sponge. They wipe away yellow plaque or fat.
3. Windshield wipers contain alcohol, which attacks greasy areas.

From dirt and grime

Soot contains resins, as well as fatty impurities, since it is a combustion product various materials. You should not immediately try to wash off the soot with water using brushes or scrapers. It will smear, rub into the plastic, and such stains are practically impossible to clean.

Algorithm:

1. To sweep away the settled soot, you can do this with a vacuum cleaner or a broom very carefully so as not to smear it.
2. When the bulk of the soot has been removed, begin wet wiping with a thick cloth soaked in a degreaser or dishwashing gel. Needs to be constantly replaced dirty water to clean.
3. Rinse the area clean cold water, wiping dry with a soft cloth.

Cleaning plastic windows

At correct selection facilities old stains on plastic windows they also disappear easily. To prevent this, you need to systematically wipe off dust from windows and window sills with a dry fleece rag.

Professional cleaning substances are divided into several types: cleaning, washing, spraying. Cleaning solutions clean windows and window sills from yellow plaque without harming them.

1. Domestos– this product removes stubborn stains, whitens areas, and has an antibacterial effect. To do this, apply a small amount to a sponge, wipe off the yellowness, leave for 20–30 minutes, and rinse with clean cold liquid.
2. Mister proper– a universal chemical liquid that helps clean window sills. Add three tablespoons of the product to six liters of water, stir, then wash the surfaces, rinse with clean water, then wipe with a dry cloth or rag.
3. Sanita– fat-soluble creamy paste. Apply it to greasy areas of the windowsill or window, and after 40 minutes, rinse with clean water.
4. Cillit bang– a product with a pungent odor that removes yellow stains and dirt well. It must be sprayed onto the desired area, wiped with a soft cloth, left for 20–30 minutes, and wiped with a damp cloth.
5. Permolux– a cream that removes fresh stains. You need to smear the dirty area, wipe it diligently with a dry sponge, and rinse with water. Can be repeated if necessary.
6. Kosmofen 10– a strong toxic substance, work with it only in a well-ventilated area using a respirator. Apply a small amount with a sponge and then rinse with plenty of clean water.

Windows can also be cleaned using folk remedies using what you always have on hand at home. One of simple ways- use of powder for brushing teeth and chalk.

• grind chalk into powder;
• take one tablespoon of powder, pour in a little water, mix until paste-like;
• Apply to the windowsill and rinse with clean water.

Tooth powder is used in the same way.

Whiten appliances

You can whiten equipment with special wipes that are soaked in a solution with a cleaning composition, sold in the same place where office equipment and Consumables. This effective method in the fight against yellowness. The wipes will not scratch the areas being treated. They are used to wipe TVs, monitors, and keyboards.

• Ovens and microwaves can be bleached using hydrogen peroxide: apply to a soft cloth and wipe the yellow areas several times.
• To remove yellowing from the refrigerator, you can use chlorine-containing cleaning solutions. To do this, remove the parts needed for processing from the refrigerator, soak them in water with the product for 10–12 hours, then rinse well with water.
• A special cleaning agent is also suitable, in the form of a gel with a gentle structure. You can also use any powder, the main thing is that its granules dissolve easily in water.

Cleaning products for plastic

To remove dirt well without damaging the surface, you need to use special washing mixtures; they have a suitable composition of active ingredients.

Folk

It is enough to systematically wash the desired areas available means that can be created at home. These substances will help whiten plastic window sills, dishes, furniture legs, etc.

The most common:

1. Laundry soap. To do this, take the grated half of the bar, dilute it in water room temperature. Then wipe the yellowed surfaces with a rag or sponge soaked in this liquid, wait one hour, then wash thoroughly. This is the simplest, gentlest substance for whitening, with a bactericidal effect, it will be useful in the fight against greasy plaque, dust, and dirt.
2. Chlorine. Place the necessary removable parts in a chlorine-containing cleaning solution for 12 hours, and then wash and rinse.
3. Technical soda plus laundry detergent. Add one tablespoon of soda and one tablespoon of washing powder to one liter of water. Place the necessary elements into the resulting mixture for an hour or two, and then rinse well.
4. Alcohol. You can use any alcohol: ethyl, isopropyl, methyl and other alcohols. It is recommended to wear disposable or rubber gloves and safety glasses. When treating surfaces with alcohol, the room must be ventilated.
5. Acetone. The procedure must be carried out quickly and make sure that there are no smudges from the acetone, as this can ruin the plastic. You need to be extremely careful: some types of plastic can dissolve in acetone.
6. Powdered bleach with hydrogen peroxide (perhydrol). In half a liter of water, dilute one tablespoon of perhydrol and powdered bleach, the main thing is not to heat the perhydrol.
7. Hydrogen peroxide plus oxidizing agent. You can try to remove unwanted yellowness on plastic surfaces with this simple substance by applying it several times.
8. Powder for washing clothes with bleaches. It needs to be diluted with warm water to form a thick paste, apply a small amount to the yellow area, wait 20 minutes, wipe with a sponge, then rinse.
9. Vinegar. It is better to choose 80% vinegar essence for this; 9% vinegar will not help. Take cotton wool, apply the essence, rub the yellowed areas, then rinse generously with clean liquid. It is recommended to carry out this work wearing special gloves.

Professional

Chemical professional sprays and aerosols are easier to use: they are already ready, and you just need to spray them, apply them and then follow the instructions.

1. Arexons tiefenpfleger- an aerosol that can neutralize unpleasant odors, cleans well and protects. Does not cause allergic reactions in humans, does not harm the skin of the hands. It can also be used to clean glass. The aerosol is applied to the window, then wiped with a dry flannel cloth.
2. Cockpit spray is a protective, cleansing, renewing polish. It is harmless to environment, flavored, it is produced with the aroma of peaches and apples. It has antistatic properties and protects the surface from polluting particles and dust.
3. Elf eclap plastic is a spray that perfectly removes greasy stains, cleanses, forming a thin, transparent, protective film.
4. Simonis copit shine– aerosol with good aroma, removes fat, makes the removal of impurities invisible.
5. Shell cockpit cleaner– a substance that has antistatic properties, protects against dirt, dust, emphasizes color, and gives a radiant shine.
6. Armor all protectant– spray. It can clean, restore plastic surfaces, and has antistatic properties.
7. Kerry KR-905- an aerosol capable of removing different kinds contamination, has an antistatic effect and can extend the service life of plastic.
8. Atas plak– a sprayer consisting of fluorine-containing polymers, thanks to which the surface shines for a long time, and also repels dirt and does not transmit ultraviolet rays.

Caring for plastic products

There are also many aerosols that can return plastic to its original appearance, and they also have an antistatic effect, covering the products with a thin film. It is advisable to carry out preventive maintenance on equipment. The absorption of fats and dust is delayed by wet cleaning.

Proper care will extend the life of plastic elements. The main ways to prevent yellowness on plastic products:

1. Use substances intended for plastic.
2. Always rinse surfaces with plenty of water after using cleaning solutions.
3. Systematically remove dust, contaminants and wet wipe with detergents.
4. Avoid mechanical damage, abrasives and hard metals.
5. Do not place hot objects on plastic surfaces.

You can clean the plastic different ways and means. By adhering to certain rules, you can apply several of the listed techniques. And if you can’t remove the yellowness, then a special aerosol paint can save the situation.