Convenience and technical advantages plastic windows Today it has been appreciated by numerous users: with minimal labor required to care for it, plastic structures provide maximum warmth and comfort in homes and offices. Preventative care consists of periodic cleaning and washing (preferably at least twice a year). For windows facing a busy street, the cleaning frequency increases as they become dirty. There are certain rules of care that determine...

During transportation and installation, numerous contaminants may remain on the windows, including traces of:

• from packaging and pasted protective film;
• from building materials used for fastening in the window opening;
• at the hands of workers (when carrying and installing plastic structures), etc.

The process of use also leaves its mark: dust, traces of kitchen fumes, residues of glue and tape after the holidays. New Year's decorations and stickers. All these unwanted heterogeneous layers should not spoil the look window openings– often it is their condition that can give visitors and guests an undesirable impression of the state of the office or home as a whole. How to clean plastic windows from dirt in order to restore and maintain them in perfect condition?

How to care for PVC windows

During operation, numerous methods for washing plastic windows using a variety of Supplies, which are the most effective for removing contaminants. Washing plastic windows is greatly facilitated by using:

• convenient devices - mops with scrapers, rubber, fabric and foam pads;
• systems with glass watering and flat rubber nozzles for cleaning glass and plastic surfaces;
• napkins made of soft cotton fabrics - flannel, fleece, cotton - white to avoid the appearance of colored stains;
• ordinary newspapers used in everyday life, with which wet glass can be cleaned to perfect condition;
• old nylon tights, convenient for cleaning glass;
• paper towels and microfiber cloths, etc.

Attention: Use toilet paper It is not recommended for washing to avoid small wet pieces remaining on the glass.

Window cleaning products

When choosing detergents for washing windows, you should take into account the composition and type of contaminants, which are divided into groups:

• dusty;
• sticky;
• leftover building materials.

The most common and effective cleaners for windows and plastic window sills from ordinary dust and dirt are alcohol-based cleaning fluids. For experienced housewives know how to wash plastic window sill PVC windows at home: to prepare a cleaning solution, just add vinegar (4:1), soap and a little salt to warm water. After washing, the window sill is guaranteed to be free of yellowness and dirt.

Detergents and cleaning products for the care of PVC windows

Today, a variety of products are offered for the care of plastic window profiles, including fittings and seals, including convenient kits:

• with profile cleaning spray;
• with oil for fittings;
• with lubricant that protects rubber seals from cracking.

Knowing how to wash tape from a plastic window without streaks, you can do it without much effort, using the following that are familiar to you at home:

• tea tree oils;
• medical alcohol, cologne or vodka;
• regular nail polish remover.

Attention: It is not advisable to use products containing ammonia, for washing surface decorative film glued to plastic.

Washing procedure

In order to quickly cope with the upcoming cleaning, you should prepare the work site in advance by removing everything unnecessary from the windowsill, and placing detergents, tools and materials nearby. Be sure to wear protective gloves. Next in order:

1. First of all, you need to wash off the accumulated dust from double-glazed windows, plastic structures and drainage holes.
2. Treat contaminated surfaces with detergents, leaving them for several minutes - this will help to deal with contaminants more easily. Use soft rags or newspapers to vigorously wipe all treated surfaces, removing accumulated dirt. Plastic is sensitive to abrasive effects, so rags are chosen with a light and soft structure.
3. For particularly dirty areas, wash twice.
4. Next, the surface is thoroughly cleaned of residual detergents and dirt with warm water, leaving no streaks or traces of the materials used.

Additional processing

In order for plastic windows to serve as long as possible without breakdowns or malfunctions, we must not forget about maintaining good technical condition fittings, metal mechanisms and rubber seals. After finishing washing it is useful to perform the following treatment:

• fittings and metal mechanisms - machine oil or technical petroleum jelly;
• rubber components of plastic windows - with silicone grease;
• window sill and plastic parts of windows - with polish, which makes them shiny and well-groomed.

If the surface of the window sill or plastic window parts is damaged by small scratches, it is advisable to use solvent 646. With its help, you can remove even old yellowness and greasy deposits from kitchen fumes from the plastic. Avoid contact of solvent with rubber seals as this may have a detrimental effect on their quality characteristics.

PVC windows - care and cleaning

How to care for plastic windows after renovation

When renovating a house, it is advisable to protect windows from getting on them. mortars, polyurethane foam etc. But if polyurethane foam, mortar or glue does get on the plastic, the question will definitely arise - how to clean plastic windows after repair? In order to remove the remains of building materials from plastic and glass surfaces with minimal damage, there are effective ways cleaning them.

Cleaning from polyurethane foam

First of all, the remaining foam is carefully removed with a spatula that has a clean and smooth surface. Cleaning as much as possible mechanically contaminated area of ​​plastic, residues can be removed with a special foam cleaning agent or an acetone-based solvent. Use rubber seals to protect your hands. A solvent is applied to the felt fabric, which is used to saturate the remaining foam. Once wet, they can be removed by vigorously wiping the surface with felt. In a similar way, you can clean cement from windows.

Cleaning PVC windows from glue, tape and yellowness

Cleaning up glue

To clean windows from the adhesive on which the protective film was attached, you can use the two most common methods:

1. The most effective way is to use Cosmofen, which can be purchased at hardware stores. Depending on the degree of contamination of surfaces with glue, you can choose various modifications of “Cosmofen”. The most gentle is the fifth number of the glue remover, the twentieth is more effective.
2. Using a construction hair dryer, with which the glued surface is heated, and the remaining glue is carefully removed with a new spatula. After this, the plastic is wiped with felt soaked in a solvent (acetone-based) and washed with an aqueous cleaning solution.

What to pay attention to

Plastic windows are reliable and durable protection of any room from noise and low temperatures. However, in order not to disrupt their inherent functions, the operating rules should be strictly followed. Thus, it is prohibited to use the following for cleaning and washing dirty windows:

• abrasive materials;
• substances containing acids, nitro compounds;
• gasoline;
• household solvents.

1. The use of abrasive cleaning agents (powder and granules) leads to the destruction of the protective surface layer of the plastic and to a change in its color. As a result, scratches appear noticeably, which further contributes to accelerated contamination of the windows.
2. There is no need to clean off dirt with sharp objects - in such cases it is difficult to avoid damage to both plastic, rubber, and the double-glazed windows themselves. In addition, from the resulting scratches, the plastic loses its external qualities.
3. A semi-matte plastic profile is more durable; minor damage is less noticeable on it. Semi-matte ones significantly benefit from long-term use, without losing any of their external advantages.
4. It is not recommended to use concentrated alkaline cleaners.
5. The plastic surface may deteriorate if detergent leave it on for a long time, especially when high temperature air or direct sunlight.

Proper cleaning and care of PVC windows after renovation

Plastic windows that sparkle with cleanliness do not block sunlight - after proper cleaning, their transparency emphasizes the attractiveness of interiors and exteriors, improves mood and even increases productivity. Produced detergents and devices speed up the cleaning process, while increasing its quality. Applying only professional chemistry for washing, you will be able to keep your plastic windows in perfect condition for many years.

Washing PVC windows after renovation How to care for PVC windows PVC windows - care and cleaning

Plastic window sill – indispensable attribute PVC windows. One of the advantages of plastic is its resistance to contamination, but if something stains a perfectly white surface, it cannot be washed off so easily. Let's figure out how to clean a plastic window sill!

Cleaning products - how to clean plastic window sills?

All plastic cleaning products can be divided into two main groups: factory products and folk recipes. The first are effective, but require additional costs, the second are less effective, but are practically free, since necessary ingredients always at hand.

Among the factory products there are even special cleaners for plastic window sills and frames. However, if you look at it, what makes them special is the absence of reagents harmful to plastic - solvents, acetone, acids. They soften the plastic and lead to the formation of microcracks, from which it is hardly possible to wash out small dust particles. It is also important that the products do not contain abrasive particles that can scratch the surface.

Having rummaged through the store shelves, you will find a lot of products that are promoted as detergents for dishes, floors or bathroom walls - the content is the same, only the advertising is different. Agree, buying a whole can of special cleaner for two or three window sills is simply not profitable. Therefore, experienced repairmen and housewives prefer universal products such as Domestos, Mister Proper, Comet and cheaper analogues.

Traditional recipes are not as effective and require more physical effort and time for cleaning. However, they have a significant advantage - many products are safe for children, do not pollute the air with harmful chemical compounds, do not emit fumes and do not leave marks on the surface. In addition, you can prepare such a detergent, if not free, then very inexpensive.

The safest for plastic is a soap solution or paste made from soap or washing powder.

Ammonia, citric acid, baking soda or mustard are not applicable to plastic window sills! They can leave behind micro-scratches or lead to the formation of cracks. It is very easy to prepare the solution - grate a bar of any soap (40-50 g) and dilute it in a small amount warm water, until completely dissolved. The higher the concentration, the better. You can do the same with washing powder, the main thing is that the grains are completely dissolved.

How to wash and bleach a plastic window sill - construction pollution

Windows, and with them window sills, are installed in the room long before the renovation is completed. So they usually face a lot of risks of getting dirty. The film, which is designed to protect window sills and window frames, does not always cope with this task. The bad master is the one who left dirt behind, but the fact remains that the repair is completed, and you are puzzled by the problem of how to clean the plastic window sill and frame. It’s much easier with glass—it’s difficult for dirt to stick to it. How to clean and wash plastic window sills to restore their perfect appearance?

How to wash and bleach a plastic window sill - step-by-step diagram

Step 1: Remove dirt and dust

First, remove the end caps (if there are any) to prevent dirt from accumulating where the caps meet the sill. Clean the surfaces from ordinary dirt and dust: first, carefully sweep the dirt from the window sill with a dry cloth or broom, or vacuum it, and then wipe the residue with a damp cloth. It is best to use not just any rags, but a microfiber cloth, or at least cotton, flannel or fleece.

Step 2: Apply the product

If there are contaminants stuck to the plastic (plaster, putty) on the surface, apply paste or gel to them and let the contaminant soak for 2-5 minutes. In the case of stains of polyurethane foam (), which may have stained the window sill during installation of the window, it will be more difficult to remove the contamination. In this case, first cut off as much of the foam layer as possible, and then apply a paste or gel, or a special solvent, to the remains. Try to apply solvent only to the foam itself. Leave the stain to soak in the cleaner for 10-15 minutes - during this time the foam should soak and soften.

Step 3: Getting rid of difficult dirt

We wash off the paste or gel and use a rubber spatula to pry off the remaining dirt. The polyurethane foam will have to be slightly scraped, but a rubber spatula or a brush with stiff bristles will not harm the window sill.

Step 4: Stripping

Wash off any remaining dirt with plenty of water and wipe dry. If other spots are found, repeat the procedure.

From time to time, at least twice a year, the rubber seals that are used to secure the glass and hide the cracks should be lubricated with silicone grease. It is usually recommended to do this before the onset of cold weather and in the spring. After you have managed to wash the plastic window sills, glossy surfaces You can rub it with a special polish for plastic, which is sold at any hardware or hardware store.

How to wash and clean plastic window sills - household pollution

Streaks from windows, traces from flower pots, rust - how can you clean and wash a plastic window sill from these contaminants? There are plenty of methods to combat them! If you only trust household chemicals, then your “arsenal” of products must include various gels from well-known brands: Sif, Domestos, Mister Proper, as well as a hard-sided sponge and rubber gloves for cleaning. Carefully study the label - many manufacturers indicate that their products are also suitable for plastic.

• In order to restore radiant whiteness, experienced housewives use Domestos– the result will really please you.
• For quick cleaning effective Mister proper- everything is as advertised, wiped and clean.
• If rusty streaks appear on the window sills, this is the best way to deal with them. Cillit.
• Traces of children's "art" - strokes of wax crayons - are effectively removed by a melamine sponge.
• Wet wipes designed for office equipment or the kitchen will help deal with small stains or dust.

And yet there is such a stage of contamination of the windowsill, as in that joke about children: “Honey, will we wash these or will we give birth to new ones?” Such consequences could also be caused by errors during cleaning, when products with acids were used for a long time, damaging the structure of the plastic. The window sill takes on a gray, dirty tint that cannot be washed off by anything. In this case, only . Choose a thicker film; it will withstand any tests in the future. It doesn’t have to be white - it can be a marbled or wood-like film, as well as a wide variety of patterns and colors. In the end, if you can’t decide, buy several options at once; fortunately, the cost of the film itself allows this.

Before gluing, get rid of dust and other dirt and wipe the window sill dry. Then peel off the film from the protective paper layer on one side and carefully glue it to the window sill. Gradually peeling off the protective layer, press the adhesive side against the window sill, using a rag or a special rubber roller to push out air bubbles. It’s not scary if the film goes askew - you can safely peel it off and stick it back on, it won’t lose its properties if, of course, you got rid of the dust in advance.

After graduation finishing works stains and drips from construction mixtures often remain on plastic windows. The polyurethane foam needs to be cut off and the remaining residues removed with Dimexide, White Spirit or a special remover. The protective film is removed using a scraper and a hair dryer, and the remaining adhesive is dissolved with alcohol. Paint, putty and whitewash can be cleaned with a spatula or using household chemicals. We will tell you how to clean windows after repair and remove scratches from the plastic profile.

The finishers have finished their work, but before the house begins to shine clean, it is necessary to remove construction debris and wash all surfaces from stains of paint, putty and lumps of foam. First, let's deal with the windows: first of all, we'll remove the protective film, usually this is done in one motion, but if the windows were installed a long time ago and no one removed the film, then you'll have to tinker.

Protective film

Some owners neglect the instructions and do not remove the protective tape, explaining that the repair is not yet completed and the plastic profile needs to be protected from stains and construction dust. This is of course true, but over time the glue changes its properties and the film tightly “sticks” to the frame. It’s better to remove it immediately and stick on masking tape, which can be easily removed and protects it from dirt just as well.

If you didn’t know this, and the film has managed to stick tightly, then use one of the suggested means:

1. Construction hair dryer and a scraper for metal-ceramic plates. It is necessary to heat the film and remove it with a scraper for cleaning metal-ceramic stoves.
2. Scrape off pieces of film with a blade or a stationery knife, and erase the remains with an eraser. It will take quite a long time to clean, but the result will not disappoint you.
3. If the film has crumbled, then washing it can be quite difficult. Useful for work White Spirit or technical alcohol. Apply the product to pieces of film, wait a few minutes and scrub thoroughly with a stiff bristle brush ( metal cannot be used!)
4. Another way to remove small pieces is to stick wide tape over it, press it well, smooth it out, wait an hour and tear it off along with the stuck pieces of film.

Attention! Apply " Cosmofen" And similar means other brands only as a last resort, if household chemicals are powerless. Some types of plastic may change color when exposed to solvents or lose their gloss.

We wash putty and plaster

When decorating a window opening and plastering walls, building materials often fall on the glass and frames. Plaster can be gypsum, cement or lime. Regardless of the composition, it can be washed off the plastic profile with a damp cloth. If it has already dried, use a dry rag or spatula, depending on the degree of contamination. To avoid scratching the plastic, wrap the sharp edge of the spatula in a rag and clean off pieces of plaster, cutting it off right at the profile.

Sealant (silicone)

If silicone sealant gets on the windows, there is nothing to worry about. Just wait until it dries, pick up the edge with a spatula, grab it with your fingers and gently pull until you have it all in your hands.

Whitewash

Dry whitewash on glass and plastic can be easily wiped off with a dry rag; using a wet rag will only spread the dirt and will take a long time to wash away stains and drips. After you have removed most of the whitewash with a dry cloth, you can start cleaning the window. Plastic profile wash with soapy water, and glass with window cleaner or homemade cleaning composition (for 2 liters of water, 1 tablespoon of ammonia or 2 tablespoons of vinegar).

Things are not so good with lime whitewash; it won’t go away that easily. It can be removed from glass with a blade or a stationery knife. In order to wash off lime from PVC windows, use one of the suggested means:

1. Cillit, dilute with water one to one and apply to the stained surface, after a few minutes scrub with a hard washcloth. Be careful, Cillit contains oxalic acid, check in a place out of sight before use.
2. Dissolve a tablespoon of vinegar or citric acid and wash your profile.
3. Salt also helps get rid of lime. A glass of salt on a bucket of water.
4. Instead of salt and vinegar, you can add vegetable oil to the water: 100 g. for 10 l. water, wash the dirty floor with the same composition, vinyl wallpapers and even wooden furniture. After the whitewash has been washed, the surfaces are degreased with dishwashing liquid. Lacquered furniture is not degreased, but polished with a soft cloth.

Wallpaper glue washes off easily warm water.

Polyurethane foam

If the team was not particularly careful, then after they leave you may encounter another problem: dried foam on the profile, window sill and glass. If the foam has frozen in a piece, then you can scrape it off with a spatula, and wash the remaining trace using improvised means. How ? We will briefly touch on this issue; for more details, click on the highlighted fragment.

1. Sunflower oil . Fresh dirt should be wiped with a cloth soaked in hot water. vegetable oil. An old stain will take longer to remove. Rub and cover with an oiled rag after 30 minutes. the remaining foam will be much easier to wash off.
2. Vinegar 9%. With a little effort, you can remove traces of foam.
3. If the foam has not yet hardened, it can be easily washed off.” White spirit» or a liquid for washing the mounting gun containing ethyl acetate. Apply the remover only with a white cloth, otherwise the dye will dissolve and be absorbed into the plastic, making it difficult to clean. But it is better to let the foam harden and remove it mechanically.
4. « Dimexide"- a pharmaceutical product that is used by experienced builders to remove traces of polyurethane foam. You need to cut off the main part of the piece with a blade, moisten a cotton pad with dimexide and rub it well, put the disc on the stain and leave for 5-10 minutes. The foam will soften and easily separate from the plastic.
5. You can use a homemade “wash”, for this you need to mix 10 grams of acetone and solvent A-649, 20 gr. vinegar essence and 50 gr. liquids for washing construction guns. Installers claim that this composition dissolves any brand of polyurethane foam.

Remove scratches

If scratches appear on the plastic during the repair process, then a solvent will come in handy “ Cosmofen-5", which we promised to talk about in more detail. It is used by professional installers to polish the profile and remove scratches and abrasion marks.

There are three groups of products for plastic restoration: liquid plastic, cleaner and polish.

Liquid plastic is a self-hardening mass that is used to fill deep scratches, after which the surface is polished. It is also used for gluing plastic surfaces. Happens different colors.

Unlike liquid plastic, the cleaner does not fill the scratch, but dissolves the PVC. After you have applied the solvent, you need to carefully level the surface and polish it.

Plastic polish contains substances that fill small scratches and abrasions, creating the illusion of newness and gloss.

Prepare for work:

• A few white rags, colored rags will fade from the cleaner's components, and instead of removing scratches, you'll end up with a permanent colored stain. When choosing a rag, check whether it leaves lint.
• Selected remedy.
• Sandpaper No. 400 or 600.
• Putty knife.

Before starting work, prepare the surface: wash with soapy water and degrease with alcohol or window cleaning liquid.

Sand the scratched area with sandpaper, this may be enough.

If the scratch is very deep, then take a spatula, apply a little liquid plastic to the edge, and, pressing the spatula firmly to the surface, fill the scratch. Wipe off any remaining glue with a rag. You need to act quickly - the plastic hardens in 60 seconds. Next you need to apply “ Cosmofen-20» or gently polish the affected area.

If the scratches are not so deep, then use a plastic solvent " Cosmofen-5" You need to apply a little product to the surface, as soon as the plastic softens, it is carefully smoothed with a brush to fill the scratch. After hardening, the restoration site is polished with a soft cloth soaked in " Cosmofen-20».

Polish is used to remove minor scratches and abrasions. A soft cloth is moistened with the product and the damaged surface is polished in a circular motion.

We would like to warn readers that the work of restoring plastic is quite painstaking and requires certain skills. The quality of plastic varies greatly depending on the manufacturer; an inexperienced person may make mistakes in the choice of products or in the process of work. Therefore, we still recommend entrusting the removal of scratches to specialists from the company where you ordered the windows. The cost of such services is unlikely to be higher than the cost of a repair kit.

Trademark Cosmofen is not the only manufacturer of such products; you will find many analogues in construction stores.

Anastasia, February 9, 2017.

During off-season cleaning, we thoroughly clean our windows. Recently, PVC windows have become very popular. Plastic structures are easy to wash and clean. In addition to the windows, we have to wash the window sill, which is most often also made of plastic.

Due to the large number of contamination options, it is not always easy to wash it from dirt and stains. In this article we will analyze the basic methods of washing a plastic window sill and tell you how it is done at home.

When washing a window, it is necessary to clean all associated surfaces from dirt.

Basic techniques

In most cases, to clean the window sill, we do not need to resort to special methods; a regular soap solution will do. Using a sponge or rag, you can easily wash off fresh dirt from the plastic surface. The frame of a plastic window can also be washed with this simple composition.

Smooth and even plastic is easy to clean with standard microfiber cloths, which have good absorbent properties. It is also acceptable to use other soft rags: flannel, cotton, suede. If the window sill is made of rough plastic, it is easier to use regular sponge for washing dishes, and in difficult places, a brush with strong bristles.

What you definitely cannot use on a plastic window sill are metal brushes and sponges, even for the most stubborn stains, because such tools will definitely scratch it.

If the role of fresh dirt is grease, which most often affects kitchen windows, then it is better to make a foam solution with dishwashing detergent, since greasy deposits are still more in its purview. However, when using household chemicals to wash dishes, you will have to rinse the window sill several times to remove the detergent from it.

Regular maintenance will keep your windows clean.

For window sills made of strong plastic, which are not afraid of abrasive cleaning agents, powder is suitable, but in practice such an abrasive is used extremely rarely. Therefore, you can arm yourself with a standard detergent spray and treat the plastic surface. When doing this, do not forget to wear rubber gloves to protect your hands from the caustic solution. In addition, strong household chemicals are contraindicated for people suffering from asthma or allergies; this must also be remembered.

The most difficult thing to clean from dirt is the corner between the window sill and the window frame; it always gets clogged in this small gap. a large number of dirt that is difficult to pick out. It’s extremely difficult to get there with a sponge or rag, so take a brush, maybe even an old toothbrush.

Household chemicals

If we do not have health problems, we can easily use modern household chemicals. These products are very effective for removing a wide variety of contaminants, are easy to use, and their cost is within an acceptable range. Walking into any hardware store you can easily see this.

Typical set of household chemicals on a store display

We have identified several of the most popular compositions used when working with window sills:

• Pemolux is one of the most popular dishwashing detergents, available not only in powder form, but also in gel form. Perfectly removes greasy deposits, old dirt, and water stains. This gel is very gentle and is not classified as an aggressive household chemical, so if you forget to wear rubber gloves, it’s okay. The composition is more suitable for spot application, it helps to wash the plastic surface from stains; to do this, it is simply rubbed into the stain and then washed off with water. For deep stains, you can use the gel a couple of times.
• Domestos is a very popular and frequently used product for white plastic, as it not only removes dirt, but also has some. Copes perfectly with traces of rust, yellowness and other colored deposits. Using Domestos at home is extremely simple; apply the detergent with a rag or sponge to the plastic surface of the window sill, and then, after 10-15 minutes, wash it off along with the dirt.
• Mr. Proper is an excellent product that can be purchased in any form, liquid or powder. The cleaning composition is strong enough to remove dirt from various surfaces, including plastic. The detergent is available in the form of a concentrate, so regardless of whether you have powder or liquid, you need to dilute the composition with water. Then wash the window sill, remove any remaining dirt stains, and rinse with clean water.
• Sanita is one of the magical detergents, active. It is quite acceptable to wash the windowsill with it. Apply the composition with a sponge to its entire surface, rub it a little and rinse with water, all the dirt comes off perfectly. If the dirt is old, you can give the composition 5 minutes to corrode it. When used, the composition does not smell the best, outright chemical.
• - one of the extremely powerful means from the arsenal of household household chemicals. The composition is very strong, caustic, with a pungent odor. It is recommended to use it for the most stubborn dirt on the window area. To remove dirt from plastic elements, you need to apply a detergent to their surface and leave to soak for 10-15 minutes. After which all dirt and detergent are easily washed off with water. If there are deeply ingrained stains, you can repeat the procedure a couple of times, but as practice shows, this does not happen with Sillit.
• Sif is a gel detergent used by housewives for rough plastic window sills. Copes well with stains from flower pots, water stains and other household dirt.
• White Spirit, Solvent - in some cases, solvents can help to remove sticky dirt or traces of drawing. Strong and less caustic compounds are White Spirit and Solvent. The first is more suitable for removing sticky dirt, like, and the second for washing off traces of pens, pencils, felt-tip pens and other paints.

Popular household solvents

To remove minor dirt from window sills, you can use ordinary wet wipes, or a specialized one with the addition of alcohol for wiping. household appliances, glass, mirrors. Window cleaners also do an excellent job.

One of the pressing problems of many people is to wash off the primer from the plastic window sill that appears on it after repairs. This is not easy to do, so housewives go to extremes, using strong acids, abrasive compounds and tools that most often damage the surface: they corrode and scratch it. To prevent this from happening, you can try using a folk recipe.

Home Recipes

To remove dirt from window plastic, many housewives use a melamine sponge. Qualitative characteristics Most of them are satisfied with this material.

To clean a rough window sill, it is permissible to use toothpaste. This product easily removes not only plaque, but also dirt from plastic. Chalk solution has approximately the same qualities of a soft abrasive. To get an excellent result, you need to apply it to the surface, wait until it dries and is sufficiently absorbed, and then wipe the surface with a dry cloth.

A typical plastic window sill in our homes

Another cleaning recipe is based on the properties of vinegar and soda. It is used to remove old stains and other heavy contaminants. It is necessary to pour baking soda onto the surface and rub it a little with a rag soaked in vinegar. You will immediately see how the dirt is removed.

However, there are some caveats when using this technique:

• It is imperative to wear rubber gloves;
• It is advisable to open the window vent or turn on the hood;
• Do not leave baking soda and vinegar on the windowsill long time, since the caustic mixture will burn the paint in this place, causing an inappropriate white spot to appear.

When choosing between home remedies and household chemicals, you will have to take into account many factors, including: the level of pollution, the presence of children and pets in the house, allergies or asthma in family members. Household chemicals, of course, wash away dirt faster and with less physical effort, but the harm it can cause in the future may not be comparable.

Finally, we would like to give some advice on cleaning the window sill after repair work in the apartment. In these cases, it is often actively used as a shelf, and then does not look its best.

Most often, windows are installed at the very beginning of renovation.

Scroll necessary actions can be reduced to the following:

• At the first stage, it is important to carry out high-quality dry and wet cleaning of the surface, for which the plugs are removed, all dust and construction debris are swept away, and the plastic surface is wiped with a wet rag.
• Primer or traces of plaster cannot be removed in this way; these materials stick tightly, so many builders recommend covering the window sill surfaces as much as possible when working with them. You'll have to use a stronger remedy. The cleaning composition is applied to traces of dirt and left for 10-15 minutes. During this time, it corrodes the primer, plaster and other related elements, after which they can be removed. If the primer is simply washed off, then the plaster is carefully lifted and removed with a spatula.
• Traces of polyurethane foam, which often end up on the windowsill, can be easily cleaned with a brush with strong bristles, after first soaking in detergent.
• At the end of the work, the window sill can be additionally washed with ordinary soapy water, rinsed with water and wiped dry with a microfiber cloth.

Usually such procedures are enough to remove all dirt from the plastic surface of the window sill, but if you have tried everything possible options, and nothing helped, so there is one more way out.

It is very simple and easy to disguise any dirt on the windowsill by covering it with white glossy or matte film. The film is not afraid of moisture, and can always be replaced later.

These are the methods for washing plastic window sills used by housewives. Finally, let’s say one more banal phrase: if you clean the surface regularly, there will simply be no old and difficult-to-remove stains.

Protect during repairs window profile from any type of pollution it will not work. Paint or plaster can get on the glass, polyurethane foam can get on the window sill, and the slopes and frame can get dirty. To avoid damaging the surface being cleaned and new finishing, you need to clean them properly. Therefore, many people have a question: how to clean windows after renovation?

Before you start washing window unit, you need to prepare him for this. If there are traces of glue, polyurethane foam or plaster on it, then you need to follow the following recommendations:

1. To remove glue stains from the surface of the window profile, you need to use chemical drug Cosmofen. Or remove stains with a spatula, warming them up with a hairdryer in advance.
2. Build-ups from hardened polyurethane foam must be scraped off with a spatula or scraper, being careful not to spoil the integrity of the window surface. The remaining traces must be treated with a special solvent containing acetone. The contaminated area is soaked in the liquid, and after 6-8 minutes the foam becomes soaked. Then remove the stains with a damp cloth. You can purchase such a solvent at a hardware store.
3. Plaster marks should be thoroughly soaked with water. Then carefully remove them with a spatula or a special scraper.
4. The film should be removed from new plastic windows as quickly as possible and before the onset of extreme cold or heat, otherwise it will be difficult to do this later. If you cannot remove the film coating, you can use a hair dryer to dry your hair. For this you need hot stream point at the surface with the film and hold until it begins to slowly peel off. Then you need to remove it immediately.
5. Cleaning the window profile from dirt building material, you can start cleaning the windows.

Cleaning window profiles

To clean a window profile, you must first remove dust particles from the hinges and other window mechanisms using a vacuum cleaner. Then you need window frames wash with soapy water or other detergent. To do this, you need to dissolve half a bar of soap or 2 tbsp in a five-liter container with cool water. l. cleaning agent. After moistening a cloth in it, wipe the profile. If after this procedure there are traces left on the washed windows, then you need to use other means or household chemicals.

Household chemicals for cleaning window frames

There are many products available for cleaning windows. If you use any household chemicals, you must follow the instructions for use.

The following cleaning agents can be used for windows:

• "Sanita." Has a creamy structure. Apply to the surface to be cleaned for 3-4 minutes and wash off with clean water. For stubborn stains, leave the product on for 5-6 minutes.
• "Domestos". This product has a whitening effect and helps remove heavy stains. In order to receive good result, you need to apply it to the window profile for 12-15 minutes, then rinse with clean water.
• Mr. Proper. Available in powder and liquid form. The powder is dissolved in water (6 tsp per 5 l), and the solution is used in an unchanged liquid state. The prepared mixture is placed on the window frames, and after a couple of minutes it is washed off with a sponge well moistened in plain water.
• Cillit Bang. Available with a spray bottle, with which liquid is sprayed onto the window surface. The applied product should be rubbed until foam forms and left for 8-10 minutes. Then wipe well with a cloth.

You need to work with household chemicals in a well-ventilated area and with protective equipment (rubber gloves, mask).

Traditional methods of cleaning windows

You can wash off more severe stains with products you can find at home. Such means include:

1. Vinegar essence. To clean windows from dirt, you need to dilute a 9% vinegar solution in cold water in a ratio of 3:1. Moisten a cotton pad generously with the resulting liquid and wipe the dirty areas.
2. Kerosene. Helps well in combating paint stains. You can use gasoline instead. It is worth noting that this product, due to its toxicity, should be used only if other cleaning methods are not effective.
3. Nail polish remover. This liquid perfectly removes stains from glue and paint. It is worth choosing a product that does not contain acetone. Wipe the windows well with a napkin moistened with this liquid.
4. Ammonia. To wash window profiles, use a solution prepared from alcohol and water (25 ml per 1 liter). The resulting product will quickly deal with settled dust and other traces of dirt remaining after repair work.

If you wash your windows after renovation using these cleaning methods, they will be sparkling clean.

For effective cleaning windows, the following recommendations should be followed:

1. Clean windows, especially when working with chemicals and solvents, wear rubber gloves to protect the skin of your hands from their harmful effects.
2. It is necessary not to allow any product to come into contact with the rubber window seal. The aggressive substances included in its composition can ruin the rubber and break the seal of the window. Some profiles are made with rubber already soldered into them, and if it is damaged, the entire window must be replaced.
3. If traces of adhesive mixtures and putties are strongly ingrained into the window surface, then you can get rid of them by special means, intended for cleaning cement-lime stains, which are available for sale in building materials stores.
4. Extreme caution must be exercised when working with conventional solvents that are not intended for plastic, as the high content of chemically active substances can damage the window profile. Taking advantage different ways By following these recommendations, the question of how to clean windows after renovation will no longer arise. These methods can be used to clean windows in country house. You can cope with such a task simply and quickly.